HT4623 i down loaded ios 6 now my phone wont turn on it has been 2 days and it is really bugging me it keeps saying link to itunes but it wont link itunes asks me to restore the phone and i dont want to loose my info ps i have itunes 10.7
i down loaded ios 6 now my phone wont turn on it has been 2 days and it is really bugging me it keeps saying link to itunes but it wont link itunes asks me to restore the phone and i dont want to loose my info ps i have itunes 10.7
you must restore i would put in dfu mode if it isnt asking to restore when you plug it in
Similar Messages
-
I plugged my phone into my a different computer (mac) that was not mine and it asked me to restore the phone. I started to back up the phone, then ended the phone got unplugged in the middle of the backup. Now we can't find where the iPhone backed up.
If it there is a backup you will find in in ~/Library/Application Support/MobileSync/Backup. (Just open Finder>Go>Go To Folder..., past this in the path box and click Go.)
-
i cannot restore my ipad software i had download a new software on itunes but i couldnot download it on ipad or restore the old software and the problem is restoring ipad firmware
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I. We are able to do video chat through gmail, but I had hoped to use iChat. I am using OS 10.6.8, iChat v. 5.0.3. What am I missing?
HI,
iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
However it will not Video to the Web Page login to iGoogle or the Web Mail Page login. (where people can Google Chat as it were in a Web Browser).
Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
More on this here This article has been changed several time in the recent months. It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
It could be Internet speed but at this stage I would doubt this at this stage.
10:27 PM Saturday; January 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My phone has locked up when downloading the latest software. it is asking me to restore my phone, which if I do I will loose all contacts. Can u hekp?
If it's asking you to restore it then it's already too late and you've lost it.
-
Hi,
I need to download some data from my iphone prior to backing it up. When connecting to itunes it is suggesting I restore it now. I will lose quite an amount of data if I cannot find a workaround. Is there any way to get access to contacts, notes and photo's before I restore the phone?
Phone details are: model: A1429
FCC: ID BCG-E2599A
IC 579C-E261DA
IMEI: 013412004666230
CheersThanks for the update. I went through the restore process and all the data I thought I would lose was there. The data must have been copied straight away before the update failed over.
Cheers
John. -
I took some pictures and a movie on my iphone sync to iTune but it not there to see it back on the phone
Hello Bath668,
Thanks for using Apple Support Communities.
Please use the instructions in the following article to report a problem with the rental.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Take care,
Alex H. -
my iphone 4s is in recovery mode somehow- that what itunes says. how can i restart it without restoring it. it was never back up yet and i dont want to loose information from it. itunes says all info will be erased once restored. help pls.
If your phone is in recovery mode, the data is already lost. Hopefully, if you've been using your phone as intended and have been synching and backing up frequently, your data loss will be minimal.
-
i down loaded a new ios in settings now my screen has gone blanc and i cant use or answer my phone even though it still rings
Well is the download finish?
-
I downloaded ios 7 to my wifes ipad 2. The only problem was, with the new system the letters and numbers on the keyboard became so streamlined that my wife had trouble seeing them because of a eye problem. Is there a way to get the old keyboard back and if not how do you uninstall ios 7?
I had thought this situation was solved but it just got worse. In addition to being without service for several days I am now being charged a cancellation fee for a broadband service that BT disconnected in error. BT Vision was also terminated by BT but the set up charges are still in place. Does anyone know who the relevant Ombudsman is? I called BT from America on Friday - for an hour - while someone called Aruj sorted out why there is an order 'in progress' that I didn't initiate; why I have fees relating to a problem created by BT and why there are references to a house move that didn't take place and a BT Vision service I no longer have but didn't cancel myself. He assured me it would be rectified and my bill would be reduced by 139 pounds and we would get confirmation of this later that day. I asked him what chance there was that this would not actually happen - he said no chance at all; my new bill would be 23.50.
There was no text message. An online chat person today told me there had been a fee reduction request which had been declined and there was nothing else he could help me with as he dealt only with broadband. But he would get BT Vision to email me. They always seem so helpful.............
I'm sure I'm listed somewhere as 'a problem', there's no other explanation for why I get the runaround -
Long story about what happened but basically I was using the iPad (first generation without retina display) to watch TV at one point it had 20% battery so I plugged it in then it wasn't charging and I didn't realize so it got to 5% and shut off. I plugged it in to charge it but it just kept shutting down and showing the apple logo, then briefly showing me my home screen before shutting off again. I waited a while to see if it would charge, while it continued to turn off and on by itself. Finally, I unplugged it to see if it had gotten any charge but it just told me to plug it in again. I plugged it into a different charger, same thing. I decided to try connecting it to a computer and it stopped turning on but it did not seem to charge. I tried restoring it as it said in the article. It worked until it got to restoring the iPad from the backup that I had because it immediately shutdown before I could continue. I tried to restore it a second time but still it shut down! I'm so frusturated and I cannot afford to get a new iPad, I need it for school and there is no Apple store for 80 miles nor do I have any insurance or warranty on it! (Obviously considering it's the first iPad to ever come out.) I really don't know what to do! HELP
Try this Support Article > http://support.apple.com/kb/HT1808
-
Can I load iOS 5 beta onto an iPhone 4 that has been synced to a windows computer?
I have my dev license and I have installed iOS 5 on my device with my mac. I would like to know how to load iOS 5 on my windows based iPhone 4 as well. Is it possible to download iTunes 10.5 for windows?
I am thinking I will just load everything as far as I can on a mac and then when it prompts me to "set up iphone" on the opening screen for iOS 5 I will take it to my windows computer and plug it and run it on iTunes there. I found a copy of 10.5 but dont know if I can use it or not. HELP!
-AndrewI have my dev license and I have installed iOS 5
Then you should be posting in the Developer forums at http://devforums.apple.com as posting in these public forums violates your NDA. -
my i phone 3gs has crashed and all that is left on the screen is the i tunes logo and the usb cable picture, when i plug the phone into my laptop its asking me to restore the phone and this will erase all my data. is there any way around this so i dont lose all my pictures ?
Connect your iphone to your computer
Hold down the home button and the power button until the screen goes blank
Turn back on your phone.
Your phone has seemed to enter recovery mode, but its ok! The steps above should bring it out -
i tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore the phone
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
HT4559 How do I down load iOS 5 to my iPad that's has 4.3
How do I down load iOS 5 to my iPad 2 it currently has 4.3
Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/a12310c6040505d18fbb03256ceb7 0de.jpg
Maybe you are looking for
-
Widget: Flash Slideshow (Image Viewer) - Modifications Help!
I created a Flash photo slideshow using Dreamweaver CS3's Insert > Media > Image Viewer. It can be seen here: http://cba.ua.edu/~ckent/ImageViewer/imageviewer.html. All and only relevant files can be found in the following directory: http://cba.ua.ed
-
what is the maximum allowable height for an internal hard drive. I want to replace my hard drive are there any other things I should make sure of in terms of compatability?
-
Is My graphic builder needs support
Hi I use oracle form builder of this specification:- Forms [32 Bit] Version 6.0.8.8.0 (Production) PL/SQL Version 8.0.6.0.0 (Production) Oracle Virtual Graphics System Version 6.0.5.34.0 (Production) and oracle database :- +9i Enterprise Edition Rel
-
Error 62 - downloading stopped what does this mean?
Hi please help what is the problem when error 62 comes up and stops the download process?Adobe Creative Cloud
-
Accessibility @ Simple Boxes
hi developers, at the moment i m reading through a SAP-document about "Rules for Accessible ABAP Lists" at the moment, and there are rules for "Simple Boxes" mentioned. My question now is maybe really stupid, but how does the code for a "simple box"