HT4623 i had go inadd vpn configuration,so that is L2tp/pptp/ipse. what am i have to write on description/ sever/ account.

i had go in add in vpn configuration. so that is L2tp/pptp/ipse. what am i have to write on my description/ server / account.

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Similar Messages

  • How can I change my VPN configuration so that not everything goes through it?

    So I generally connect my laptop through my WiFi connection, which is set as priority number 1. For connecting to certain servers at my office (I work remote) I need to VPN in. Now, I'd like to be able to stay connected to VPN without ALL my internet data going through it. My understanding of the network priority list was that it would attempt the higher connection and then go lower. But I have WiFi at the top of my list and VPN at the bottom, yet everything is going through the VPN. I know this because I did a traceroute and every URL I hit is going through my work servers. I disconnect VPN and try again, they go through the comcast DNS server.
    So my previous understanding of the priority list was that it would try through the highest priority, and then only if that didn't work it through go through lower priorities in order. Is that wrong? Is there actually a way I can get it to do what I want? Thanks.

    With VPN software installed on your Mac all connections to the net will go through that VPN. you have to shut the VPN down for your normal traffic to go directly out to the net. That is just how it works.
    Let me add that is the point of a VPN. So everything done on the computer goes through a Virtual Private Network to your workplace. Otherwise your computer could expose the work network to malware you might get from the Net on your computer.

  • HT204074 I had a charge to my iTunes that I did not order, what do I do to correct it.  It was only 1.99 but I don't want it to happen again.

    I had a purchase show up that wasn't mine or something I ordered.

    http://www.apple.com/support/contact/

  • HT4623 In My Iphone 5 my Wifi and also Bluetooth not working , so what should  i have to do ,,,,,,

    Hi Friend
    1. My bluethooth not working and not connecting to other Devices
    2. My wifi also not connecting .
    So what should i have to do
    As i am using  i Phone-5
    pls suggest me
    send me mail
    [email protected]

    Hi Friend
    1. My bluetooth not working and not connecting to other Devices
    2. My wifi also not connecting .
    So what should i have to do
    As i am using  i Phone-5
    pls suggest me
    send me mail
    [email protected]

  • How to import Lion Server VPN Configuration Profile into Profile Manager

    Greetings All,
    I'm working on configuring a Lion Server VPN (10.7.2) and I hit the following road block. I succesfully started the VPN server and profile manager. In fact, if I download the built-in "everyone" profile that has the pre-configured VPN to device such as an iPad things work just fine. However, I'd like to create other profiles with the same VPN configuration info so I can delegate more specifically to different groups and users. I was hoping I could simply import the VPN configuration profile that I saved in the Server dashboard when I setup the VPN service into profile manager somehow. The reason I'm going this route is because every time I try to just re-make the VPN profile it doesn't want to work. I'm not sure why, but I figure why re-invent the wheel if I don't have too. Any suggestions?

    After a lot of investigating I haven't found a way to do this, I'm assuming it cannot be done.

  • Can't save VPN configuration file

    I am trying to setup the VPN services on Lion Server. I setup the shared secret, entered in a IP range and defined my VPN client host which is DYNDNS (e.g., domainname.dyndns.org). I get an error message when trying to save my configuration file that indicates I did not enter or need to enter a VPN client host but the little green symbol comes on when I enter the domain name.
    I am not sure what I am doing wrong. I went back to the VPN client host and tried to enter in different VPN hosts and even resorted to using known domains just to see if I can save the file and it still will not work. Any ideas?

    I had the same problem.  What fixed it for me was to change the name of the config file.  That was it...worked just fine.

  • HT1695 Hello I was given an ipad from my mother because she bought her a newer ipad and I am having trouble connecting to my wifi due to needing to add vpn configuration.  Can you please help me?

    Hello I was given an ipad ios 5.1.1 from my mother she had purchased a newere version.  I am unable to connect to my wifi due to needing to setup my vpn configuration.  Can you please help me?

    You haven't told us what you've tried to get the vpn working and what errors you may have encountered, so I'll just give a link to an overview of setting up vpn on a device...
    http://support.apple.com/kb/HT1424?viewlocale=en_US&locale=en_US

  • How does one delete VPN configurations in the settings list not used any more?

    How does one delete VPN configurations in the settings list not used any more?

    Sorted found profiles and delete from there

  • Can anyone describe the procedure of VPN configuration?

    can anyone plz guide me in detail the procdure of vpn configuration.
    Scenario;
    Two different LANs with two cisco routers.
    one IOS router has VPN full capabilty but other one only have VPN passthrough feature.
    two different internet IPs on both independent LANs.
    so, how can i configure it, plz guide me.thanks

    See this link  there are   few examples you can reference -   scroll down to  IPSec on Router to Router
    http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html

  • Can anyone tell the procedure of VPN configuration?

    can anyone plz guide me in detail the procdure of vpn configuration.
    Scenario;
    Two different LANs with two cisco routers.
    one IOS router has VPN full capabilty but other one only have VPN passthrough feature.
    two different internet IPs on both independent LANs.
    so, how can i configure it, plz guide me.thanks

    See this link  there are   few examples you can reference -   scroll down to  IPSec on Router to Router
    http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html

  • I established a VPN configuration and connected but cannot connect to server?

    I work from an imac at home and need to connect to my work server and files.  I established the VPN configuration and connected to the building but cannot access the server.  What am I doing wrong or what else do I need to do.

    Once your VPN is connected, you still need to log in to the server(s) you are using.  This does not necessarily happen automatically - you may have to manually log in to your server(s).   To do this, in the Finder menu do Go > Connect to Server and enter the server address.  If these are windows servers it's probably an SMB connection in which case you would enter  smb://<serveraddress> in the server address field.
    Best bet is to talk with the IT folks where you work, as you may need specific information about how to log in to your server(s).  There are ways to automate the login but you first need the correct login details (server address, userID, password).
    If you want to automate the login process, here's a simple Applescript that I wrote in my own case.  Create this using Applescript Editor.  After testing, save it as an Application; then in System Preferences you can add it to your list of Login Items so it runs automatically whenever you sign in to your Mac.  Of course, your VPN will have to already be connected in order for this to actually work.
    delay 30
    tell application "Finder"
        mount volume "smb://servername1/mountpoint_A"
        mount volume "smb://servername2/mountpoint_B"
    end tell
    (Note: "servernameX/mountpoint_Y" is the address of each of the 2 servers I log into, except that in this example they are completely fictitious names.)

  • RV042 basic VPN configuration

    Hello there. I'm just wondering on how to use his RB042 VPN ROUTER. Can anyone help on how to setup the VPN?I'm kinda confused. What is the first thing to do until the last?
    Posted by WebUser Al Albiar Taposok

    Did you try google 'RV042 VPN configuration'?. It popped up with lot of step-by-config docs. if still can't find, PM me your email, i will send you one.
    Thx
    MS

  • WRVS4400N - Multiple Dynamic VPN Configurations?

    Hello,
    I am wondering if anyone knows whether or not the WRVS4400N supports more than one dynamic VPN configuration?
    I am trying to get the WRVS4400N to let more than one TheGreenBow client to connect to it.....
    Thank you,
    A Read

    Yes, you can configure multiple dynamic-to-static l2l on ASA. But for multiple connections using ezvpn will be much easier. Following links may help you
    http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805733df.shtml

  • Cisco sr520 VPN configuration and deployment

    Hope one of the cisco genius' can help me out. I have a small business with one sr520 edge router. The network is up and running fine but I need to allow remote users to connect back to a vpn at the office in order to access user winxp Pcs using RDP remotedesktop.
    I have searched the web and cisco forums and see there are quite a few vpn configurations but I found no clear setup guide for accomplishing what I understood to be pretty simple. "allow 5 outside users to connect back to the office and work as if they were sitting in the office"
    Question:
    1. What client software is needed on the remote client pc to connect back back to the sr520 vpn? Can I use the windows pptp vpn client or the built-in Mac client?
    2. My router shows three items labeled vpn. VPN remote, VPN Server and SSL VPN...i have tweaked each of these screens but still not been able to connect an outside client. Is there a setup guide to explain the features of this router and how to use it.
    3. after poking around the Cisco site for a vpn client i am wondering why do I need a support contract to use a feature of a router I just bought? Does Firmware and client software cost extra?
    Thanks for any assistance you can offer...
    Kevin Hall
    Houston Tx

    Hi,
    Some users have reported that IPSecuritas works well with the Cisco Small Business routers.
    http://www.lobotomo.com/products/IPSecuritas/
    For the RV180 I would try to adapt the SA500 tutorial to make it work:
    http://www.cisco.com/en/US/docs/security/multi_function_security/multi_function_security_appliance/sa_500/technote/note/SA500_mac_appnote.pdf
    Please note that this client is not supported by Cisco. If you have questions or issues, please post here on the forum.
    - Marty

  • I've got 2 phones an iphone 3gs and i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me add vpn configuration or set up internet tethering/ personal hotspot or portable wi-fi

    I've got 2 phones an iphone 3gs i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me connect or add vpn configuration or set up internet tethering/ portable hotspot or portable wi-fi but i have no problems connecting or adding my android phone to tethering or portable hotspot

    http://support.apple.com/kb/HT4517
    http://support.apple.com/kb/TS2756
    if those two links don't help then contact your phone carrier.

Maybe you are looking for

  • Full Path of selected File

    Hi together, in our programming project we are facing a problem with handling of files. Due to the security it is not possible to handle local files via flash. This is what I figured out by searching via google. But is it possible to get just the ful

  • HT4623 my sounds are not working

    My sounds are not working on my iphone.

  • Addition to ALV buttons

    Hi I want to add additional buttons next to ALV standard tool bar in my report.MMBE These needs to take parameters from the displayed list or from the selection screen. parameters should be matnr and plant. how to do this? Thanks

  • Agent showing error while executing script from OTM

    Hi Team, OTM is installed in a separate server(Windows 2008 R2). When I am executing scripts in my client machine from OTM in server , I got the following error in agent.... 17:22:17,192 INFO [Messenger] Try server=t3://10.50.48.29:8088 destination=o

  • JavaServer Faces web.xml rewritten when build

    I am using Netbeans 5.5.1 with the Sun Server 9.0 running on my machine. I have created a connection pool to an IBM iSeries db database. I have added the following code to my web.xml file:     <resource-ref>         <description>jdbc:as400://FRED</de