HT4623 I have downloaded and installed IOS6 for my IPad I am now unable to access the internet on IPad any help would be appreciated.
Having downloaded and installed IOS6 for IPad ,I can no longer access internet on IPad.Any solutions ?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
Similar Messages
-
I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!
Select ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router -
i recently upgraded my 4s to a 5s. the verizon store took my old phone for a trade in. i cannot get any of my pictures to download from icloud. my photo stream folder only has a small percentage of the photos in it. any help would be greatly appreciated.
That's possible if he didn't connect to a WiFi hotspot after taking them. I don't think the "Personal" Photo Stream uploads over Cellular, unless they changed it since the last time I used it.
If that's the case, then the photos likely didn't upload to Photo Stream and are stuck on the phone.
And you're not going to be able to get them back, either. -
I have downloaded and installed the new ios7 software on my iphone 4s but im having trouble getting through the activation process i keep getting the message "iphone could not be activated because the activation server cannot be reached"? any suggestions?
The activation servers are probably overloaded with everyone trying to update to iOS 7 today. You might need to wait and try again later.
-
I tried downloading F-Keys by MTB Development Utilities for my IPad but it won't load. Not very computer literate, any help would be greatly appreciated.
You'll need to provide some specifics before anyone can help you. Simply saying it "won't load" tells us nothing.
-
I juat purchased a Mac Pro Laptop. After downloading iTunes, I could only find four purchased albums. Any help would be appreciated -
Hi Bill,
Never bought anything on iTunes, but I think you just need to fill out this form...
http://www.apple.com/emea/support/itunes/contact.html -
I just recently downloaded the newest version of iTunes and am signed into my iTunes account, but I am unable to access the iTunes Store. I didn't get an error message with a reason why I am unable to connect, I'm just not able to connect to the iTunes Store. Please help!
https://discussions.apple.com/message/22904334
-
I just downloaded dead trigger 2 and every time I enter the app it crashes 5 secs in. If you guys know a way to stop the crashing please tell. Any help is appreciated
I'm not able to follow the program flow from your post. Please create a small standalone program that exhibits the problem and post that back here.
Your assumption re a NPE is correct, that's the only way they're generated.
There are no "canned" methods to resolve NPEs. The best solution is to put System.out.println statements for all of the involved objects and variables immediately preceeding the error line (in this case, 110) and something will show null. Usually that's enough info to backtrace to the real cause. -
I have recently been given an iPhone 4, and I put in my old t-mobile simcard. It says that I have signal but i can't send/recieve calls and texts. Is there anyway this can be fixed?
is the "old" T mobile sim an iPhone micro sim or something else ,
if so that is likely your issue -
I have downloaded and installed Photoshop extended on my Mac today, but I cannot open the program, what more do I have to do?
Hi Anina,
The .dmg file is the original installation package.
Do you remember the software going through the installation process and asking you to input a serial number?
I would suggest moving the .dmg file to your desktop, and then initiate the installation process by clicking on the install.app.
You should get a message that the installation is successful once it completes. Try launching the application after that.
Please reply to this thread if that doesn't work.
Thanks -
My iPad2 will not download and install iOS6!!!!! I have tried over 4 times, powered off, etc HELP!!!!!
OTA or iTunes? Yesterday I used iTunes to update the wifey's with no issues. What are the symptoms?
-
I have downloaded and installed Acrobat pro DC but its asking for a serial number of my previous version but I never had a previous version
you purchased an upgrade version of acrobat. if you don't have a qualifying product (previous acrobat version), you'll need to exchange.
Return, cancel, or exchange an Adobe order -
I have downloaded and installed the iPhoto tool to update so my pictures transfer over, but it's still telling me I need to update. Any suggestions why this isn't working for me? I have a Macbook Pro.
You have to download and RUN the iPhoto library upgrade - then launch iPhoto - If you had iPhoto '08 or earlier (version 7.x.x) - the upgrade is installed in the utilities folder of your Applications folder
LN -
Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.
Hi,
Please open Region, under administrative -> Language for non-Unicode programs: choose Chinese.
Kate Li
TechNet Community Support -
I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.
Welcome to Apple Support Communities
When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
Respecting to the second question, you will get better answers in the Numbers for OS X forum
Maybe you are looking for
-
When importing tracks from a CD to ITunes, only 10 of the 13 songs are imported. How can I display and import the missing three? Thanks.
-
[SOLVED] EDID read invalid with nvidia-313.18
Hello All, after several months of trouble-free operation, my main system started having issues with detecting my second monitor properly. I am quite sure that this has something to do with the latest nvidia driver (313.18) but since I don't use this
-
Can't install Windows 7 on my Macbook pro.
Hi, I've been trying to install Windows 7 on my Macbook pro, with no luck. I have been able to create a Windows Partition via Bootcamp. And after the Windows 7 installation guide started to expand my Windows files, my Windows 7 CD suddenly stopped sp
-
Entire OS has slowed down and likes to stall
What factors can I look in to to cause the entire operating system to slow down dramatically? I can't recall if there was any single instance that started this behavior but it's been several weeks now. Some examples; On a fresh reboot, it takes a cou
-
Hi forum. I posted this on the QuickTime forum as well. I am having a very strange thing happening. Everytime I use QuickTime X to watch a movie, or record audio it spawns a new .plist file in /Library/Preferences. They look like this "com.apple.Quic