HT4623 I just updated my daughters 3GS and it will not activate for me.

Hi I am in desperate need of help I just updated the software on my daughters 3GS and it will not activate no matter what I do.
i would appreciate any help, thank you.

You can not update an iPod Touch 3rd Generation to iOS 6.
Only iPod Touch 4th generation can update to iOS 6.
iPod Touch 5th Generation will come with iOS 6 already installed.
Check this page out:
http://www.apple.com/ios/whats-new scroll to bottom of page to "iOS 6 is compatible with."
You will have to place your device into recovery mode and set up as new.
Follow this article for assistance:
http://support.apple.com/kb/HT1808
Hope this helps.

Similar Messages

  • I just updated the iPad IOS and it will not finish. HELP

    I just updated the iPad IOS to 8.3 and it will not finish the install it has been stuck for over 24 hours. I plug it into the Mac and the computer says that the iPad must give me access which of course I can't. So I can not do a hard reboot. help

    If it's stuck on the progress bar then you could try a soft-reset and see if that gets it to complete : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should reappear and it will hopefully reboot fully.
    If not then try recovery mode and restore to your backup : If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Just updated my iPhone 5s and it will not turn on now

    I have just updated my iPhones 5s with las test update ios 7.0.5 and my phone will not turn on one now please help

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release.

  • Just updated I-Phone 4 and volume will not work

    Just updated I-Phone 4 to OS6 now my volume will not work.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    * http://kb.mozillazine.org/Lost_bookmarks

  • I just updated my ipod touch, and it will not work now.

    I just updated my ipod touch... i think its 3g... to the newest thing, and now i reset my ipod and it just goes to a bluish green screen and won't turn off, or do anything but reset. when i reset it it goes to the apple logo and then right back to the blue screen. What can i do?! also, it won't connect to my computer.

    You can not update an iPod Touch 3rd Generation to iOS 6.
    Only iPod Touch 4th generation can update to iOS 6.
    iPod Touch 5th Generation will come with iOS 6 already installed.
    Check this page out:
    http://www.apple.com/ios/whats-new scroll to bottom of page to "iOS 6 is compatible with."
    You will have to place your device into recovery mode and set up as new.
    Follow this article for assistance:
    http://support.apple.com/kb/HT1808
    Hope this helps.

  • I restored / updated my 3gs and now will not activate

    why does my phone not work after update /restore

    I suspect you didn't read wjosten's reply. The activation server is not down. Your computer or your actions are preventing the activation. To be more specific, the possible causes are:
    1. Your antivirus is blocking access to gs.apple.com.
    2. Your phone is jailbroken.
    3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
    4. Apple's activation servers are down (very rare, and never for more than an hour or so).
    For 1. try disabling your antivirus.
    For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.

  • HT201270 i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    capriz wrote:
    i have just updated my old 3GS ...
    To what... iOS 7 is Not supported on the 3 GS

  • HT4623 My daughter forgot her passcode for her 3GS, and iTunes will not let me change the passcode or even update.  Please help!!!

    My daughter forgot her passcode for her 3GS, and iTunes will not let me change the passcode or even update.  Please help!!!

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • I updated my iPhone 3GS and i can't activate my phone

    I updated my iPhone 3GS and i can't activate my phone

    You can try, but despite what they'll tell you in the jailbreaking community, restoring the device does NOT always return the phone to factory condition, especially if the modem baseband has been altered.   The vast majority of users have bricked their phones and have been left high and dry by the jailbreaking community.

  • I have a iphone 3gs and it will not update to the IOS 5.1.1

    I have a iphone 3gs and it will not update. I have tried going to settings and it doesnt even show up the software button to check and see if I can update.  I have also tried on itunes to see if i will update and all it says is "the version iphone software (4.2.1) is the current version"
    any ideas to help?

    Post the model number. You probably have an iPhone 3G.

  • I have just updated my iphone 4 and now its saying activate phone with apple id. i have and its not working

    I have  just updated my iphone  4 and it now says activate iphone. I have tried doing this with my apple id and it isn't working.

    What is the exact message displayed?

  • Hi I just updated my brothers ipod and i have a backup for ios5.1.1 can i go back?

    Hi I just updated my brothers ipod and i have a backup for ios5.1.1 can i go back? all i want is my contacts back and i dont care what ios im on

    Downgrading your iPod's version of iOS is not supported by Apple and that's all we can say on these forums.  So if you want to learn how to do that, you'll need to look elsewhere. Sorry.
    B-rock

  • Please i need help i updated my iphone 3gs and now its not activating

    i need help i updated my iphone 3gs and now its not activating

    What happens when you try to activate the iPhone?
    If there is an error message, what is the exact wording of that message?

  • I just updated my phone to iso 7 and it will not activate my push notifications or facetime and I'm connected to wifi help???

    I just updated my phone to iso 7 and it will not activate my push notifications or facetime and I'm connected to wifi help???

    Hi Heva79!
    You may want to try simply restarting your phone to see if you are able to get past that page after a restart. Instructions for doing this can be found here:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    If you are still experiencing this issue after a restart, you may want to attempt the steps for a reset as outlined in that same article. Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I just downloaded Premiere Elements 9 and it will not open Help!

    I just downloaded Premiere Elements 9 and it will not open Help!

    kmeg55
    From where did you download Premiere Elements 9 at this late date? What computer operating system is it to be running on?
    Do you have the 9.0.1 Update installed?
    Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
    Are you getting any display card errors?
    We have just gone down this type of road with another 9 user, so let us start with what finally seems to have worked for him.
    What video card/graphics card does your computer use? Is the driver for that card up to date according to the web site of the manufacturer of that card? If not, update the card driver. If the driver is up to date already, then delete the BadDrivers.txt file.
    For now I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
    Local Disk C
    Program Data
    Adobe
    Premiere Elements
    9.0
    and in the 9.0 Folder is the BadDrivers.txt file that you delete. Make sure that you are working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path shown. After you deleted the BadDrivers.txt and reopened Premiere Elements, the program will generate a new BadDrivers.txt file but now the problem should be gone.
    Please review, consider, and then let us know the outcome.
    The rationale behind deletion of the BadDrivers.txt file can be found in post 10 of the following thread
    Premiere Elements 9 Tryout Serious Display Problem
    ATR

Maybe you are looking for

  • EJB 3.0 & JBoss -- How to run a SLSB in JBoss

    Hi All, I am having trouble running an EJB 3.0 SLSB on JBoss AS. I have also tried those specified by others in their cases but havent been able to solve mine. The ejb-jar file is deploying nicely in the server without any errors but I do find that j

  • Variable substitution do not function

    Hello All, I have a problem to implement dynamique variable in my scenarii I read many blogs but I did not find the solution. I create a very simple configuration abap proxy to file. My goal is to create my file name with a message_id in Advanced und

  • Error when running package to load data from InfoProvider

    I encounter the following error when using the standard package to load data from a InfoProvider to BPC. I tried loading the data from both DSO and InfoCube, but I get the same error. The log message where the error occurs is as follows: Task name CL

  • Mac Mini - Toshiba DLP?

    Hi, I would like to get rid of Time Warner Cable for good so I am thinking of getting either a Mac Mini or possibly a Macbook to hook up to my Toshiba DLP projection TV. So, my first question is - will this TV be acceptable to use? My second question

  • FM for creating Printer

    Hi, There is a Function in sap to create a Printer. I don't want to use Bacth input (transaction SPAD). Thank you