HT4623 why my device had "no service" even I already put my sim card..I have follow a few instruction from you tube how to solve this problem but all failed. Please help me .TQ
why my device had "no service" ..I have follow a few instruction from you tube how to solve this problem but all failed. Please help me .TQ
See if anything in this support document help http://support.apple.com/kb/ts4429
Similar Messages
-
I have recently tried to install the CD software for the above printer and although I can print wirelessly. The CD presents an error message saying that MAC os 10.7 is not supported. I have followed the instructions to install a software update from apple but no printer update appears in my updates window. What should I do? Can anyone forward me a link to the update?
Any help would be much appreciated.
AlexHave you tried contacting HP tech support?
http://support.apple.com/kb/dl907 -
I updated my iphone 3g ios from 2.2 to 4.1, after the upgrade my iphone keep showing no service even if i insert a sim card. Any help please.
Jennyccc wrote:
What can I do to fix it
Jailbroken devices are not support by this forum, or by Apple. Apple reserves the right to refuse activation to any iOS device that is currently, or previously, been jailbroken. -
My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?
Supported Bluetooth Profiles
It is not supposed to detect other Apple products via Bluetooth. -
I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj SI already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software. -
How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"
I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig -
Any ways on how to solve this problem ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (on these forums we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore. -
I Try to open an Indesign document. The message: it is made in a newer version. Go tot CC: Help/Give your Adobe id/Start Indesign again and try to open the document. This doesn’t work. How to solve this problem?
What version are you running?
What version was it made with? -
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?
Nope
One needs to press the home and sleep / wake keys together for the phone to reset
The other thing I could recommend
Let the battery run out and the phone completely "die"
It may take a day or two with it not being used
Then plug it in to charge and see if there is any change in behavior
If you cannot get this to work - you may need to bring it to an Apple store -
Hi my iphone 4 is disabled how can solve this problem? help me please
hi my iphone 4 is disabled how can solve this problem? help me please
What do you mean by "disabled"? Disabled by entering the wrong passcode? If so, you'll have to force the phone into recovery mode & restore it to get it working again & remove the passcode:
Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
I have an imac osx 10.5.2 from about five years ago and recently my flash player stopped operating/responding. Does anyone know if I have to install a new flash player? I have attempted it several times and it won't let me. I would appreciate any suggestions on how to solve this problem. Do I need a new operating system?
Why have you not updated to 10.5.8?
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later: -
Hello
THIS IS RAZA
I GOT A MACBOOK PRO
I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanksThis is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
http://www.adwaremedic.com/index.php -
Why i can not open my itunes how to solve this problem
i have problem with my itunes version 10.3 but it said the file itunes library it could'nt be read it was created by new version of itunes where i can go to find the library of itunes or how to solve this problem..
Hello:
This article may help:
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh11399.html
Are you really running OS X 10.4 or is your profile out of date?
Barry
Maybe you are looking for
-
How can I get my music files back when they are no longer on the computer?
So the problem I am having is that I cannot play songs on the playlist because "the file cannot be located" error. I checked the iTunes media folder and they weren't there. I searched my whole computer and they still could not be found. The story be
-
ITunes killed my burner! Any solutions?
I upgraded to iTunes 8.0.2 and now cannot burn a disc. Unfortunately now I cannot seem to burn ANYTHING with ANY software. In iTunes, the disc spins up to burn, but it jumps straight from the first track to "Finishing Disc Burn" and hangs there indef
-
Anyone else have a problem with tools not working?
With no particular cause, int he middle of working on things, tools like lasso tool, eraser, the brush or the clone stamp stop working. The program will hang for a while and then I am able to switch tools, while using one particular tool at that time
-
Problem with business object : oInventoryGenEntry
i have defined oInventoryGenEntry as document my code is: oIGN = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry) oIGN.DocObjectCode = SAPbobsCOM.BoObjectTypes.oInventoryGenEntry i value the itemcode
-
How can I change my profile picture
Dear All, The Modern Skype with touch-screen features looks completely different from the old Skype that we used with Win 7 and earlier versions. For example, in the old Skype, we could go to the Skype button and easily scroll to "Change your profile