HT4623 With the new software update on the iphone, how do I delete a photo and also how do I close open apps so I dont wear battery down
With the new update for iphone, how do I delete a photo and how do I close open apps. There used to be a delete button to delete a photo and I used to double click on the main phone button and then click on the x to close an app.
Wipe the drive using DiskUtility and download and reinstall Yosemite and set it up as a new Mac. Then purchase the Apps you require with your own Apple ID which you will enter when setting up the new Mac.
Cheers
Pete
Similar Messages
-
was downloading the new software update on my iPhone when it froze and has been in that state for more then 15 hours.
tried turning it off didn't work. tried pressing buttons didn't work.
tried unplugging it and waiting for the power to die hasn't worked
tried the steps on the webiste but they didn't work
tried working it from the laptop doesn't connect because i can't put in the passcode.
also tried calling iTunes support but due to the holiday no one is answering
what can i do i need my phone!!!
thanksi was able to access the phone by pressing down on the off button and home at the same time
-
HT1338 I keep getting an error every time when I try to download the new software 6 on my iPhone 4
I keep getting an error every time when I try to download the new software 6 on my iPhone 4
Check ans fix your computer Date and Time. If that oes not work, refer this link for right click Redeem option:
https://discussions.apple.com/thread/2153674?start=15&tstart=0 -
HT4623 how do you close off apps with the new software update?
How do you close out apps with the new software update on iphone? I cannot x out of them.
Double tap the home buttons and swipe upwards on the preview of the App (not the App Icon).
-
I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?
Zach Doody wrote:
itunes says i cannot update the phone as it is in recovery mode.
That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
Restore it. You don't have a choice at this point. -
How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.
The apps in the multitaskbar should appear like pages on the whole display. To close them, just swipe from the bottom to the top. you can select single apps for closing, when you swipe them like you would swipe your homescreens.
-
Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?
Have you attempted an iTunes restore and setting up as a new device? Sometimes battery life issues can be caused by corrupted iOS software.
- Greg -
Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!
OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”. -
I did the ios6 software update on my iphone and it did not complete because it said there was an error. It then gave me a message that I needed to restore my phone. When I tried to restore my backup it says it cannot be completed because there is not enough storage. I cant delete anything to make more storage because my phone is not usable because it wont restore. What do I do?
Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.
-
With the new OS5 update. does the imessage also free with international text?
with the new OS5 update. does the imessage also free with international text?
Yes, but both you and the person you are texting must be on iOS 5.
-
I just installed the latest software update on my iPhone this weekend (9/22/12), and now I can't get email. I've restarted and closed all my apps to no avail. I'm able to get email on my laptop, so it's not a problem with my provider. Any ideas?
Originally we were getting the error that the phone could not connect. Then, after deleting the account multiple times and re-adding it again, the error message CHANGED to having to log in to Yahoo and authorize.
When we went to Yahoo in a regular browser and logged in there was an alert telling us about connection attempts so it disabled mobile/iphone connectivity. It required that we change our password FIRST.
Then, we went in to Manage Apps and Webpages and saw that iPhone was not there but Facebook was.
After all of this went back to the phone and deleted then re-added the account again and SUCCESS!
It now also shows up on the Yahoo Manage Apps and Webpages.
Hope this helps someone else. Please consider giving me points if it does or like the post.
Fred -
I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode. Are there any options available to avoid going through with the recovery. This seems really lame.
No.
You must restore. -
HT4623 i can not find the botton SOFTWARE UPDATE on my Iphone 3G
i can not find the botton SOFTWARE UPDATE on my Iphone 3G,
I can t use whatsUp anymore because I need to update the systemIf you can upgrade you will have to do it through iTunes:
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
Hi everyone, I just got the new iOS5 update for my iPhone 3GS. I receive a message saying that "Your SMS mailbox is full. New messages cannot be recieved until you delete some messages." I deleted all of my messages but still could not receive texts after restoring and restarting my phone. Can anything be done to remedy this??? Thanks!
Apple is screwing the pooch on this one. Need to call in and be vocal.
-
Install RAC 11gR2 and Apply Patches with OUI New Software Updates Option
Has anyone tried the installation with the New Software Updates Option?
I will install 11gR2 RAC Grid and I plan to do the following steps:
1) Install Oracle Grid Infrastructure Patchset 11.2.0.2
2) Do all the configuration with OUI
3) Create ASM disks
4) Install Oracle Database 11.2.0.2 Software Only
5) Apply Oracle Recommended Patches 11.2.0.2.2 (12311357) and 12431716. (ref. MOS doc [ID 756671.1])
6) Create RAC Database (advanced option) with DBCA
With these steps:
Grid and ASM disks would be configured without the recommended patches, but the database will be created with the patches applied.
I would not like to do a "Software only" install of GI and then apply the patches because later I would have to manually do all the configuration steps.
If I use the OUI Software Updates Option to apply the patches, will OUI do all the patching and then let me configure GRID with OUI ?
Quote from Oracle® Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux - Part Number E17212-11:
" Use the Software Updates feature to dynamically download and apply software updates as part of the Oracle Database installation. You can also download the updates separately using the downloadUpdates option and later apply them during the installation by providing the location where the updates are present."
I could not find more detailed information about this feature on documentation and MOS .
ThanksHi,
You can download Latest Updates And Patches Using using option -downloadUpdates
./runInstaller -downloadUpdatesYou can use this note:
*How To Download The Latest Updates And Patches Using 11.2.0.2 OUI [ID 1295074.1]*
Don't miss it ..
*Error: INS-20704 While Installing 11.2.0.2 with "Use pre-downloaded software updates" Option [ID 1265270.1]*
Note : Please make sure that user downloading the patches updates have the proper/correct permission to download the patch updates from MOS ( My Oracle Support).
Do not use the /tmp/oraInstall* directories for the download location. Unpublished bug 9975999
Documentation explaining ...
4.5.1 Running Oracle Universal Installer
Downloading Updates Before Installation
http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH
Regards,
Levi Pereira
Maybe you are looking for
-
Mini DVI to Projector Problems
I could use some help figuring out why this setup isn't working... I'm trying to connect my (early 2009) Mac Mini to my Optoma Projector. The projector isn't getting a signal at all. I already have a 50ft VGA cable running through my attic, so I'm tr
-
Need help with actionscript for media controller
I seem to be having a slight problem. I've been looking around and everything I see is for .flv playback. Anyways, here's my problem. Client wants a video that's interactive. When a transition occurs a simple tex button shows up which links to certai
-
Question mark instead of application logo?
For some strange reason once in a while (not often) my Mac deside to replaces an application logo that is in my dock with a question mark. Nothing was done to the application itself so I'm wondering why it just changes the image. I went back into the
-
Client no in SAP Business System name.
Hello All, I am currently working on naming for the SAP PI objects. In my previous SAP PI implementations I used naming like SIDCLNTNO ( f.e. DPECLNT110 ) and SAP Recommends that as well. However we faced problem while pointing the different client
-
IBM OS ISSUE: SYSTEM HANG WITH JFS2 AND HEAVY LOAD
제품 : ORACLE SERVER 작성날짜 : 2004-11-24 IBM OS ISSUE: SYSTEM HANG WITH JFS2 AND HEAVY LOAD ================================================== PURPOSE 이 문서는 IBM AIX5L OS 상에서 Arch Process가 online redo log 를 release하지 못하고 OS의 kill 명령으로 kill조차 되지 않을 경우 조치 방