HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

Similar Messages

  • Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

    Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
    charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
    Regards, Bill
    * update
    I've tried modifying this key and the path:
    Also tried using symlinks as detailed here:

    Here's some links I've used to try to figure this out:
    Regards, Bill
    The registry method does not work with 8.1.  I found this out the hard way.  Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

  • A very simple question: how to obtain the mail server name?

    In our JSP application, at one point an email will be sent to notify one event. Currently, that is done by using the html tag: mailto. To have more control on the email in tems of context format (a bad layout right now) and others. I would like to have it processed at servlet by using the JavaMail API, so that it have a nice format and have the sender's email address right in case email client is not installed in the machine where the browser in. The JavaMail API is straight forward. The question is how to obtain the mail server name, and the sender's email address if there is one?

    How to obtain the mail server's name? It's your server, you should know its name. Or if it isn't your server, you should ask the administrator for its name. Point is, you need to decide in advance what server you are going to use and hard-code its name into the program or into a properties file.
    And how to obtain the client's e-mail address? You have to ask the client, probably by putting a box in the HTML and asking them to type it.

  • Very simple question-how to fill a shape I draw with color

    hi. I am new to photoshop and having a lot of trouble selecting any shape that I draw. I am trying to do a tutorial that involves filling a canvas with gray, then drawing a smaller white rectangle inside of the larger gray canvas/rectangle. (I did not forget to unlock the background).
    My question: how do i select and fill (with white) the second rectangle I draw on top of the larger gray rectangle???
    In general, I cannot figure out how to select and/or fill any shape I draw using the rectangle tool. Likewise, the marque shape tools are no help as I cannot seem to draw a marque on my gray rectangle in order to select it and fill it with a white fill. I have also tried to use a "fill layer."
    I am almost certain that something is wrong with my computer(I reset the settings), but then again I have not used photoshop in over a year. Any help  will be greatly appreciated.

    The Rectangle Tool sgould create a Work Path, Shape Layer or Fill Pixels according to the Settings in the Options Bar.
    The Rectangular Marquee Tool should create a Selection, which you could Edit > Fill or use as a Layer Mask for a Solid Color Layer.
    Could you please post a screenshot with the pertinent Panels visible?

  • Tooooooo much to comprehend. Please help. I have a very simple question !!

    Hi All Gurus,
    I have been to almost all sites that google could throw at me, also scanned a lot of books, but thats just added to confusion. Thus, resorting to the root of all, the oracle forum. Please review the task & suggest a solution, even a good idea is OK.
    The Tast - Insert / Delete / Modify Data in a single database in chinese & korean simultaneously. The application which will use the data is an ERP. The users want, the chinese to insert / display data in simplified chinese using a chinese desktop, the koreans want to insert / display data in korean using a korean desktop. The data will be stored in the same table, maybe a different or same column.
    Example Activity 1 -Item / part number description like "Two inch schedule 80 pipe" to be stored in simplified chinese field and also stored in korean field in the same table in item master. This data should get displayed correctly as per the client language.
    Example Activity 2 - Chinese customer name to be stored in simplified chinese in the name column in the customer master and some other record to have a korean customer name in korean in the name field again. This also to be displayed as per client language. It is ok if the korean client machine display corrupted data for chinese customer name and vice versa.
    I have made my case as simple as possible, awaiting for some bright ideas !!

    Woh~~ Activity 1 involves automatic language translation! Hiring an Oracle consultant would be a good idea. ^_^
    Is the ERP web-based? If yes, I see no difficulty. Grab a Oracle 9iR2 or 10g DB, set the characterset as AL32UTF8.... Stick to UTF-8 on all the web pages.... Install all necessary Simp. Chi and Korean fonts in the desktop computers.... Make sure all the stuffs are recent enough to support Unicode Supplementary Characters.... Anything more?
    If it's not, you will have to elaborate on your setup.

  • Painfully simple question: How do I view Answers?

    I feel like have to be missing something really obvious, but when I get to a post with the green star indicating it has been answered - how do I then see the answer? or the "helpful posts"? All I see is the question.
    Again, I apologize if this has been addressed a thousand times already.

    Actually that is a good question. The original poster marks the question answered. That accounts for the green star you see. Now comes the problem. The OP can award a green star for the best answer and 2 yellow stars for helpful answers. Some OPs don't do this they just say it's answered and don't mark which one helped them It happens often this way. Makes it confusing to know which was the best answer.

  • Very Simple Question - How to Start a Programme with C?

    I am sure this is quite easy to do. I am trying to get an application I am writing in C to start a separate application, whenever it runs...
    int main(void)
    /etc/rc.d/moblock start
    return 0;
    Does anyone know how to do this?

    Hrm.... I am getting these errors...
    bash-3.2# gcc -o /usr/bin/karamblock /home/karam/Desktop/karamblock.c
    /home/karam/Desktop/karamblock.c: In function 'main':
    /home/karam/Desktop/karamblock.c:4: error: 'pwd' undeclared (first use in this function)
    /home/karam/Desktop/karamblock.c:4: error: (Each undeclared identifier is reported only once
    /home/karam/Desktop/karamblock.c:4: error: for each function it appears in.)
    with this code...
    #include <unistd.h>
    int main(void) {
    system("/etc/rc.d/moblock start");
    return 0;

  • Very Simple Question - How to change to lower case in Comic Book Theme

    I have a site I have created in iWeb08 and used the Comic Book theme but I cannot change the text on the main page to lower case. I have copied and pasted text in and its always UPPER CASE. I have tried changing the font to no avail. I made a new blank page and typed in and again its UPPER CASE. I can change the font to something else (eg Arial) but whatever I type - its in upper case. Can this be changed. It is OK on other themes. Many thanks.

    Bingo. Many thanks. Did not spot that there.


    Hello there,
    I have a very simple question. I want to know how I can convert a class diagram that I have created in jdeveloper into a jpg image so I can put in word. When I try exporting it only has the uml to xmi option
    Does anyone have a suggestion?

    Right mouse click on the class diagram,
    than click publish diagram on the context menu
    and save as jpg where ever you want...

  • A very very very simple question

    Hi guys,
    I have a very simple question and standard but I cant find anywhere...
    I have two dateTime variables, i need to calculate difference between this dates in days, thats it.
    I tried all functions and tried without success a Java Embed task but I couldnt retrieve this objects as java.util.Date so I couldnt calculate exactly the difference in days like this pure java code:
    (dataVencimento.getTime() - dataReferencia.getTime()) / 86400000L)
    can you help me this?

    Hi Jose
    Just see if these alternate approaches works. I know there may be lot like this and you may be lucky to find out simple out of box solution itself. If you want to solve this issue and move ahead, gives these approaches a shot.
    1. Create a very simple standalone WebService that takes 2 input date elements (can be of Date type or String type. If string type, convert to date in your java code). Create a simple operation like getDaysBetween(firstDate, secondDate). In the generated webservice impl class, use the java code apis (refer earlier link for usage), and get the difference. Return this value. NOW, invoke this WebService in your BPEL Process, and pass your 2 inputs (if the bpel payload elemetns are date object or string objects of date), and get output, and then use this output in your continuing bpel process.
    2. This approach, I did a long back. When we insert any expression using XPath, in that editor window on bottom right side, we see many categories and for each category we see list of functions we can use, like for String, we can use concat etc. I vaguely remember reading somewhere, that we can add our own custom functions also in this section. So explore this direction and see if you can add your own function and then use that fucntion with your 2 input dates.
    I have not given solution to your problem, but may be these directions can help you move ahead. Or something along these lines.
    Ravi Jegga

  • A very simple question..Very Urgent

    I have a very simple question.I am able to set up the client authentication as well as server authentication. Now do i need to authenticate (both server as well as client auth.) for every request i send to the server on https...i think it should be like that it should authenticate only for the first time and for the next upcoming requests in same session should not require any server or client authentication.. i think as it happens in browsers..
    what is the fact actually??..can somebody put some light...right now in my case it is authenticating for every requests..
    This is what i have done..
    /****constructor part********/
    // and tm are arrays of keymanagers and trustmanagers for client keystore and truststore
    sslContext.init(km, tm, null);
    HttpsURLConnection.setDefaultHostnameVerifier(new MYHostNameVerifier());
    /****Method to send the request and response*********/
    urlConn = (HttpsURLConnection)url.openConnection();
    OutputStream os = urlConn.getOutputStream();
    ObjectOutputStream oos = new ObjectOutputStream(os);
    InputStream is1 = urlConn.getInputStream();
    ObjectInputStream ois = new ObjectInputStream(is1);
    SomeObject retObj = null;
    retObj = (SomeObject)ois.readObject();
    System.out.println("Get String>>>>> "+retObj.getString());
    I am creating the object of this class..and calling the method again and again for sending requests and i think handshake everytime i call the method...what i want is that handshake should happen for the first time and for the next requests no handshake or certificates should be checked or processed..
    is it possible i need to do for that..
    please help me in this..
    Akhil Nagpal

    how could I achieve SSL Session Resumption using HttpsURLConnection.

  • This is a very simple question,but I don't know.Please me.Thank you!

    I am a Chinese student in a university.I have a very simple question to ask.
    I have writed a EJB module,and I have deployed to Weblogic8.1 successfully.
    1.Now I want to write a client program.Is it necessary that the client program is packaged in the EJB package.For example ,the EJB package is Beans,is "package Beans " or "import Beans.*" necessary in my client program.
    2.If I only know the EJB interfaces,that means the EJB module is writed by other programer.I want to know how I can write the client program.How can I call EJB module's method writed by other programer.Could you give me a simple example?
    Thank you very much.

    I have writed a EJB module,and I have deployed to
    Weblogic8.1 successfully.:-)
    1.Now I want to write a client program.Is it
    necessary that the client program is packaged in the
    EJB package.For example ,the EJB package is Beans,is
    "package Beans " or "import Beans.*" necessary in my
    client program.You need not package your client with the EJB. It can be a JSP/servlet or a stand-alone application.
    2.If I only know the EJB interfaces,that means the
    EJB module is writed by other programer.I want to
    know how I can write the client program.How can I
    call EJB module's method writed by other
    programer.Could you give me a simple example?
    import java.util.*;
    import javax.naming.*;
    import javax.rmi.PortableRemoteObject;
    import examples.*;
    class TestEJBHello {
        public static void main(String[] args) {
            Context context   = null;
            Object object     = null;
            // Hashtable for environment properties.
            Hashtable env = new Hashtable();
            env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
            env.put(Context.PROVIDER_URL, "t3://localhost:7001");
            HelloHome home            = null;
            HelloWorld hello          = null;
            try {
                context     = new InitialContext(env);
                object      = context.lookup("HelloWorldTest");
                System.out.println(" JNDI Looked up >>> " +object);
                home        = (HelloHome)PortableRemoteObject.narrow(object, HelloHome.class);
                hello       = home.create();
            } catch(Exception e) {
            } finally {
                close(context);        // Closes the initial context.
        private static void close(Context context) {
            try {
                System.out.println("*** Context closed. ***");
            } catch (NamingException namingException) {
            } catch(Exception exception) {
    }Here's a sample client app code I use for a HelloWorld EJB. You need to have a EJB client JAR containing the home and remote interfaces in the classpath during compile time and runtime.

  • New comer ask 2 simple questions:how to set the use of the right click of

    New comer ask 2 simple questions:how to set the use of the right click of your mouse?
    I don't know why when i click the right button of my mouse in logic, sometimes it's the same funcion as my left one, some times it's the same function that opens the tool menu....But in MacOSX,it's all okay.Just the weired thing in logic ,please help there any kind of filter in Score? I mean, in midi track I have a C1 note, and I don't want the C1 note shown in my score, I want every note show which are above C2, like a filter. I think this is helpful dealling with some keyswich things,how can we do that?

    In Preferences -> Global -> Editing you can choose weather right click is assignable or opens the tools box.
    Not to sure about the score dude

  • Can anyone answer a very simple question for me ive heard the apple was giving a free iphone 4 or 4s bumper away is there any truth to that?

    can anyone answer a very simple question for me ive heard the apple was giving away iphone 4 or 4s bumpers is there any truth to that?

    Not any more, no. There was a free bumper program back when the iPhone 4 originally came out. It has long since expired.

  • Very simple question from a rookie

    I don't know how sequences work in OWB.
    I have a very simple mapping:
    1 (not empty) source table, 1 (empty) target table, 1 sequence.
    Source and destination are connected.
    The sequence.nextval is connected to the primary key. sequence.currval is not connected.
    When I run the debug mode an error occurs: "Could not find data for all sources and target ...". The "Test Data" shows that OWB has not found data for the sequence.

    I use 10gR2 and OWB 10.2
    The tables and the sequence are deployed. They are in the database.
    There's something strange about this:
    Starting ("Start...") works.
    The debugging does not work.
    Problem nearly solved ...
    Message was edited by:

Maybe you are looking for

  • Sleep mode LaserJet Pro 200 color MFP M276nw

    Hello, My LaserJet Pro 200 color MFP M276nw seems to have gotten into some sort of "sleep" mode:When I send something to the printer, it no longer prints, until I touch the LCD screen which seems to "wake it up," at which point it prints the document

  • SQL exception occurred during PL/SQL upload  (Web ADI)

    Hi, I am having issue loading data using Web ADI, I am getting "SQL exception occurred during PL/SQL upload" error, I tried to restart Apache, also looked into the BNE.log file for the exact error but I am still not sure about this exception, can any

  • How to review all questions in a question pool ?

    Captivate v4 I have created projects each with a question pool of approx 15 questions from which 5 random questions with answers shuffled will be drawn at the end of the project. I find that creating questions in v4 is very hit and miss and the forma

  • Can someone tell me how to add fb profile pics to my contacts?

    I have tried to get the facebook profile pics onto my contacts, but for some reason only a few of them show up. Does anyone know what I need to do to get them all to show up? Thanks in advance for the help!

  • Changing dimension

    Hi, I have a report in which I have a customer name which has got changed from last month. If I want to display in a cell this customer name for latest date how do I do that? How to write the formula for this? Basically this cell should display custo