HT4759 Completing Exchange info; Server, Domain, and Username?

When setting up my several different email addresses with my new Toshiba Laptop, I was asked to fill out an Exchange form that included filling in my email addresses, plus a Server, a Domain, and a Usersname, and finally my password. I was okay with the email addresses and the password, but did not know what to put in for my Server and Domain info, or the Username, but it may now be my new Username that we just completed, MarkScharer, for my Apple ID.
Can you please help me with this information so I can start using my new laptop!? Plus I need to know if this information is going to be different for each email address or the same? I have (3) "gmail.com" addresses, (1) "icloud.com" address, and (1) "me.com" address, and did not know if the Server, Domain and Username information would be the same for each of these or not.
Please help! Thank you, Mark Scharer

Has your employer enabled ActiveSync support on the Exchange Server?
If so, all that should be required is entering your email address, user name (domain\User) and your account password in the required fields when creating the account using the Exchange Account preset.

Similar Messages

Failed to start server domain and process scheduler in the App/Batch VM

Hi,
after the modification of /etc/tnsnames.ora in the App/Batch VM :
[psadm2@psovmab LOGS]$ more /etc/tnsnames.ora
H91TMPLT=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.133)(PORT=1521)))
(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=H91TMPLT.corp.peoplesoft.com))
I can't start server domain and process scheduler :
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 197; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 198; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec BBL -A :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 773; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 495; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
Attempting to boot ... INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSWATCHSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSQRYSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSQRYSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D APPDOM -S PSSAMSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKHND_dflt:BrkProcess -- -D APPDOM -S PSBRKHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKDSP_dflt:Dispatch -- -D APPDOM -S PSBRKDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBHND_dflt:PubConProcess -- -D APPDOM -S PSPUBHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBDSP_dflt:Dispatch -- -D APPDOM -S PSPUBDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBHND_dflt:SubConProcess -- -D APPDOM -S PSSUBHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBDSP_dflt:Dispatch -- -D APPDOM -S PSSUBDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSMONITORSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //hrapp.xflash.com:9000 -m 5 -M 7 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JREPSVR -o ./LOGS/stdout -e ./LOGS/stderr -A -- -W -P /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 774; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
Thanks

Hi,
- Which user are you connected with when running psadmin ?
psadmin2
- the output :
{[psadm2@hrapp appserv]$ ./psadmin
PSADMIN -- Tools Release: 8.50.02
Copyright (c) 1988, 2009, Oracle. All rights reserved.
PeopleSoft Server Administration
1) Application Server
2) Process Scheduler
3) Search Server
q) Quit
Command to execute (1-3, q): 1
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 1
Tuxedo domain list:
1) APPDOM
Select domain number to administer: 1
PeopleSoft Domain Administration
Domain Name: APPDOM
1) Boot this domain
2) Domain shutdown menu
3) Domain status menu
4) Configure this domain
5) TUXEDO command line (tmadmin)
6) Edit configuration/log files menu
7) Messaging Server Administration menu
8) Purge Cache
9) Preload File Cache
10) Clean IPC resources of this domain
q) Quit
Command to execute (1-10, q) : 1
PeopleSoft Domain Boot Menu
Domain Name: APPDOM
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
psappsrv.cfg has changed archiving old one...
Copying APPDOM/Archive/psappsrv.cfg to APPDOM/Archive/psappsrv_123109_1116_13.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec BBL -A :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 774; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
Attempting to boot ... INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSWATCHSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSQRYSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSQRYSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D APPDOM -S PSSAMSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKHND_dflt:BrkProcess -- -D APPDOM -S PSBRKHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKDSP_dflt:Dispatch -- -D APPDOM -S PSBRKDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBHND_dflt:PubConProcess -- -D APPDOM -S PSPUBHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBDSP_dflt:Dispatch -- -D APPDOM -S PSPUBDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBHND_dflt:SubConProcess -- -D APPDOM -S PSSUBHND_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBDSP_dflt:Dispatch -- -D APPDOM -S PSSUBDSP_dflt :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSMONITORSRV :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //hrapp.xflash.com:9000 -m 5 -M 7 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JREPSVR -o ./LOGS/stdout -e ./LOGS/stderr -A -- -W -P /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository :
     NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 773; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8}
-Are you able to connect onto the database from there with the same user ?
{[psadm2@hrapp appserv]$ sqlplus sysadm/SYSADM@H91TMPLT
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Dec 31 11:40:12 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>}
thank you in advance
JM

I'm unable to load my Microsoft Exchange account. Think I'm entering the wrong info for domain and user but haven't figured out the correct inputs...

I think the problem is with my domain and user name information. Does anyone have any suggestions...

I know that when i tried to add a Live/Hotmail account I tried MS Ex but ended up having to forward my Live to my Gmail or just add an IMAP account.

Sun Java Application Server - Domain and Node agent stop automatically

Hi,
We have installed Sun Java Application server 8.1 in a local zone on Solaris 10. The installation was successful.
A default domain (domain1) was created. We have deployed a sample application too.
The problem is that the domain and node-agent stop automatically. And need to be restarted from asadmin start-domain command.
Not sure why this problem is occurring. One solution given in Sun Java System AS 8.1 EE Troubleshooting Guide was to add these 2 lines in the /etc/inittab file to restart the domain and node-agent whenever the system re-boots.
das:3:respawn:/opt/SUNWappserver/bin/asadmin start-domain user admin passwordfile /opt/SUNWappserver/password.txt domain1
das:3:respawn:/opt/SUNWappserver/bin/asadmin start-node-agent user admin passwordfile /opt/SUNWappserver/password.txt node-agent-name
Pls help me if I can change this inittab file from the local zone and if changing this file has any implications on the other zones on Solaris 10.
Else is there any other way to resolve this problem?
Any help would be highly appreciated.
Thankyou.

One thing not clear from the post was,
* when it is going down automatically.
* Are you facing the same problem even after starting through the asadmin
* If so, Post the server.log from "domains/logs" during the starup.
If you want to bring it up with system reboot, You need to have a startup script for that in init.d and have the links to rc2/3.d.

Exchange 2010 accepted domain and email address policy

So I need some help as to which accepted domain is right for us. We are a single forest single domain that is subbed to a parent domain.
sub.domain.com
We run our own exchange 2010 separate from domain.com. We want all mail to show up as @domain.com for our users. The @domain.com will be configured to forward to @sub.domain.com. This is free Linux mail server that is separate from us.
In order to configure an email address policy for @domain.com I need to pick from the 3 types. I am pretty sure we are not authoritative for @domain.com (they are the parent). So it is either an internal relay or external relay. We all
use the same networking, and our DNS servers point to domain.com as forwarders and they host a secondary copy of our DNS.
It is a little unclear as to which to use. I have gone to each account individually to test, and that works perfectly, but I would like to set this Globally.
Thanks
Tim

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Cannot connect to Exchange 2007 server on OS 3.1

Hi
Since I've upgraded to OS 3.1 on my iPhone 3GS I cannot connect to my Exchange 2007 server. The phone simply tells me "The connection to the server failed.".
What could this be? I've read the problems that 3G people are experiencing, but I've got the 3GS.
Is there anyway to debug this? The Exchange server works fine in Outlook and I can even connect to the web interface through Safari on the iPhone.
Any suggestions?
Best regards,
Thomas René Sidor

Hi,
Seems you have found the solution here:
http://social.technet.microsoft.com/Forums/exchange/en-US/5b7d250e-c995-4322-b1e7-5ad14ace81c5/cannot-connect-to-exchange-2013-server-prompt-for-username-and-password-that-are-not-accepted?forum=exchangesvrgeneral#d266273b-e04c-45a9-8b0f-8b48bf647a86
I'm post the answers here so that it will benefit for other community members who have similar qustions:
Install the
November
2012 Update for Outlook 2007 SP3 to resolve the problem.
Thanks for our MCC steve siyavaya.
Cheers,
Steve Fan
TechNet Community Support

Delete old exchange 2007 server

Hi,
We have 2 exchange 2007 server(a and b) a is v very old hardware so we have configure new exchange 2007 name is b after configure create new data base and moved all mail box A to B server but if now server A is shutdown user prompting put user name and password.

Hi There,
You need move all the services to the server B before decommission server A.
The services that you need to move are:
Offline address book
Public Folders
System mailboxes (hidden)
Change OWA host name to point to server
When do.
Uninstall server A.
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Decommissioning Exchange 2003 Server

Follow the Exchange Deployment Assistant to the letter and you will not have issues.
http://technet.microsoft.com/en-ca/exdeploy2013/Checklist.aspx
(after the migration it shows you how to decommission it properly.)

Hello All,
My Exchange server setup is in coexistence mode (1 Exchange 2003 server entp and 2 Exchange Severs 2010 DAG is in place)
only 2 mailboxes are left on Exchange 2003 and will be moving them soon.
So I wish to know the what all precautions I should be take and what all action items are there.Recommended link will do
regards
Atul A
This topic first appeared in the Spiceworks Community

Copying files from local computer to a remote server which is not in Domain and with username and password?

"I have one workstation with static IP, Wants to create batch file to log in to this,using user name and password, copy back up files from that workstation to my desktop with batch file, please help
I am currently using batch file for back up for domain servers with robocopy commands in batch file but one of the workstation is not in domain and has static ip , also it has username and password,
Wants to create batch file on my desktop to log in this server---with username and password,, copy files from particular folder and paste it on my desktop in particular folder or auto create that folder,
please help, "
P Dave

JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
Bill - he still sees that "connection" although it isn't mapped it is attached temporarily.
P - Log off and log back on and the attached connection will be gone. It is temporary. Again - knowing the basics of WIndows would let you know this.
We have given you all of the answers that are possible. There is no other way unless you have installed things like PowerShell and PowerShell remoting or an FTP server.
If you do use a drive it can be just as easily deleted after you have finished the copy.
Again: "NET USE /?" will tell you all of the options.
Saying you know nothing is not an excuse for not thinking or looking more deeply into the suggestions made by those trying to help you. This is not a MIcrosoft support forum or help desk. It is a forum for admiinistrative scripting and assumes
that those coming here are technically trained or experienced in the basics of Windows technology.
¯\_(ツ)_/¯

Our exchange server crashed and we lost all contact and calendar data. We found an app to get the contacts off of people's phone to import but can't find the same for calendar. How do I get my calendar info off my phone and in to new exchange server?

Our exchange server crashed and we lost all contact and calendar data. We found an app to get the contacts off of people's phone to import but can't find the same for calendar. How do I get my calendar info off my phone and in to new exchange server?

You'd have to think through this, but it seems like if you are using Outlook, and the items vanished from the Outlook client as well as the server,that you could re-populate Outlook using iTunes.

Exchange Server 2013 and ms-Exch-SMTP-Accept-Authoritative-Domain-Sender

Hello, Team!
I think I’ve found a serious issue in last CU releases. This is the case:
1 Multirole server Exchange 2013 SP1 (and older) , one creceive connector from internet to this server, no edge, nothing.
I care about preventing spoofing my company’s email addresses, and remove remove the ms-Exch-SMTP-Accept-Authoritative-Domain-Sender transport permission from anonymous senders.
To do this, we usually simple run powershell command
Remove-ADPermission <ReceiveConnector Name> –user “NT AUTHORITY\Anonymous Logon” –ExtendedRights ms-Exch-SMTP-Accept-Authoritative-Domain-Sender
This command works on Exchange SP1, the client (telnet session, f.e.) which try spoof address of company will be refused. (see screenshot below)
But in Exchange 2013 CU5, CU6 and even CU7 release this revoke permissions DOESN’T WORKS without any errors, softly. I've try Powershell and ADSI but
unsuccessfully.
Then we take off permission on connector above,
we keep 3 default permissions:
Accept-any-sender
Accept-Routing-Headers
Submit-Message to Server
It is wonderful works only on server SP1, but not on servers with older versions, which have right settings.
The saddest thing is I have information about Office 365 this behavior reproduced too. And I also think what in your lab you could take 15 minutes and play this simply thing....
I found only that information on connector side is diffenent on SP1 and CU5,6,7.
This is normal connection on SP1, when somebody try spoofed address. We can see a 250 AUTH Response on server side, and server refuse fake connection, all right.
And on CU5 and newest versions we doesnt see this code. Maybe auth mechanism miss something?
Any suggestions? On MS connect site a didn't found exchange bugs topic :)

Hi Dmitriy,
Thanks for your update.
Then how about the receive connector configuration? Are they using the same authentication settings?
Thanks.
I would like to clarify the situation a little
for you.
I carried out a large migration project environment from EX2010 to 2013.
When I support this environment for 2013 more than two years.
And setting worked well in 2010,CU1,CU2,CU3,and finally in
SP1 over from my upgrades.
Understand that it does not work in versions of
the above, and I'd really like
to know why.
I repeat that I would like to know
in the first place, why it
does not work anymore?
Why it is not documented?
As You can see, if you approach with the existing
and available information on the problem, not
you will immediately understand that there are serious problems
caused serious changes.
I want to attract the attention of the Exchange team and other peoples
to the problem and find out why
this is happening.

Window SBS server 2008 and window server 2008 R2 on the same domain

Hi all,
I am a person only work for linux system. Recently i work for my company that using microsoft technologie. So i have a lot of trouble. Could you please help me and below are my big troble that i have met:
In my system, i have the first window SBS server 2008 run on our domain. However my organization growth up and we have more than 150 users and mailbox of exchange server 2007. So i do not want to use my sbs server 2008 anymore.
I am going to install a window server 2008 R2 64 bit and join it into the same domain with sbs server 2008. It will be replicate the username, dns, OU and group policy...After that i will tranfer FSMO role to new server and i will demote then remove the
sbs server.
My boss say that i should not use this solution because window server sbs can not run with any other kinds of window server 2008 (R2, standard, enterprise...) and it will automatically shutdown the main server after a couple of days.
Someone have experience can help me. I am so confuse now

Maybe this will also help to better understand the steps involved:
Transition from Small Business Server to Standard Windows Server
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Migrating away from SBS 2011
http://social.technet.microsoft.com/Forums/en-US/07c58cc4-7d6d-419a-b1a0-439c2cc0c48d/migrating-away-from-sbs-2011?forum=smallbusinessserver
Migrating from SBS 2008 to Windows Server 2012 R2 (NOT Essentials and with NO Exchange)
http://social.technet.microsoft.com/Forums/en-US/1276d2d3-a8f2-4786-82f3-4308a2affb11/migrating-from-sbs-2008-to-windows-server-2012-r2-not-essentials-and-with-no-exchange?forum=smallbusinessserver
And remember, as long as you don't move the PDC to one of the new DCs, you can leave the SBS 2008 up indefinitely. But I would remove Exchange 2007 off it right away once I've migrated the mailboxes and public folders, otherwise
you will get yourself into an Exchange coexistence scenario which is much more complex to configure and support because of the CAS differences, changing the URLs on the old one to "legacy.domain.com," getting a new UC/SAN cert with the correct
names on it, and more. Believe me, you really don't want to coexist them. The only time I've coexisted Exchange versions is during large migrations, such as 500 or more. Otherwise, I just migrate the mailboxes over a weekend and get it done with.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Upgrading from SBS 2008 and Exchange Server 2007 and Adding Modest Failover Protection

I haven't seen anyone describe this scenario, so maybe it can't be done, but it seems it should work. Can someone either confirm this is viable or set me straight and tell me it's not wise (and if not, why not).
I currently have SBS 2008 (2008 Server + Exchange Server 2007 + some other components). I use redirected folders so all my user data is stored primarily on the server, and then sync'd with their local harddrives for roaming use and as an additional
backup precaution. I want to upgrade to a modern version of Exchange (don't care too much about the underlying server OS, but seems like a good time to upgrade everything). I also want to improve the reliability for rapid recovery in the event of a system
failure. I have always felt nervous with SBS because it only runs on a single server.
My plan is:
Install Windows Server 2012 Standard on a new server machine
Join that new server to the existing SBS domain and sync the users, etc.
Install Exchange Server 2013 on the new 2012 Server
Migrate the existing Exchange data and account info to the new server
Demote the SBS Server and promote the new server to primary DC
Reformat the old SBS server and install Windows Server 2012 on it too, and join it to the domain as a second DC
Set up DFS Replication and keep all my user data folders between the two servers (so if one server fails, the other can take over, just not automatically like with a cluster)
Install Exchange Server 2013 on the reformatted 2012 Server box (so second instance on the domain) and set it up to sync with the first Exchange Server 2013 via DAG (so if either computer crashes, the other can take over for both Exchange Server and file
services)
Wouldn't that give me a complete slow-response failover system without the need for setting up a cluster (I know a cluster would provide instant failover protection, but I don't need that kind of speed - a manual switchover in the rare event of a server
failure is acceptable for us)? I could do this using cheap hardware for each server, because unless both servers fail at the same time, clients can point to the other server. And because it's not a formal cluster, I don't need to buy anything for a shared
SAN. This seems like such an obvious more cost-effective solution for a small network, I don't understand why this isn't a common approach, which makes me wonder if there is some reason it won't work.
Any suggestions or feedback? Are Redirected Folders still recommended for users on a Server 2012-based domain?
Thanks,
Colin
Colin

Ed, thanks again for your help. OK, so here's my updated plan (I realize I should probably check on some of these pieces on the Server group, instead of this Exchange group).
Constraints/objectives:
None of the machines are truly server grade hardware, but only 5 people on the network, so performance is generally not an issue, unless a given server is just pegged on CPU or HD due to its own internal maintenance tasks and can't respond to user requests.
Haven't seen any problems, since upgrading server from 4GB RAM to 8GB a few years ago.
Not going to buy any new hardware at this time, but do have several unused consumer-grade computers I can deploy as wimpy or moderate servers.
Main issue is to limit repair time in the event of a system failure (instant failover is not required, but want to be able to restore network functions within less than 24 hours in the event of a hardware failure) and minimize time spent on IT
maintenance.
Because of light IT maintenance (not anyone's primary job and we're too small to justify a dedicated IT person or to pay for outside help), almost every touch takes me research and time to re-learn what I haven't done in weeks, months, or years -- so also
want to keep all IT tasks as simple as possible.
We philosophically want to invest now for the next 5 years and avoid ongoing cloud fees (so zero interest in Windows Server Essentials with Exchange Online)
A little nervous about using VM's, just because I never have before, but I do respect that's probably the right way to do many of these things...
Currently I have SBS 2008 (Windows Server 2008 R2, Exchange Server 2007, WSUS 3, all with latest SP's, also includes SharePoint and other stuff, but I don't really care about most of it) on a single 8GB consumer grade system, which functions as a file
server and Exchange server. We use Redirected Folders and Offline files for all users, which works great for us and provides additional file redundancy (if server goes down, all of each user's files are also on their own machine and they can even continue
to work just fine w/o the server, losing only ability to send and receive e-mail). It has been sufficient, but I want to upgrade our version of Exchange and I am nervous that if that current one server fails, it would take me a long time to restore everything
from backup, easily many days, especially if I need to buy any replacement hardware. It is RAID1, so a single drive failure is easy to handle, but that's the only hardware redundancy for the current server.
New Plan:
Install Windows Server 2012 R2 Standard on a new modest machine (16GBR RAM, Core i7, 1TB RAID1 (may upgrade to 3 or 4 TB), 256 GB SSD boot drive, this had been my old personal computer)
Join that new server to the existing SBS domain (2008 R2/Exchange 2007), make it a DC, sync the users, etc.
Install Windows Server 2012 R2 Standard on a wimpy computer (4GB RAM Core i3 processor), leave it as a member server
Install Exchange Server 2013 on the wimpy new 2012 R2 Server (and nothing else, this will be dedicated to Exchange to make the most of such a wimpy machine)
Migrate the existing Exchange data from the old SBS Exchange 2007 server and account info to the new server
(or should I just create new accounts and copy the data from the user end through Outlook -- is that safer and cleaner than attempting any kind of server-level Exchange data migration?)
Demote the old SBS Server and promote the new 16GB server to primary DC. Now it's OK to take the old SBS server off the network.
Reformat the old SBS server and install Windows Server 2012 R2 on it too, and join it to the domain as a second DC (and possibly DCPROMO it to be the main server)
Install Exchange Server 2013 in a VM on the reformatted 2012 R2 Server box (so second instance on the domain for Exchange redundancy) and set it up to sync with the first Exchange Server 2013 via DAG OR set up another physical wimpy member server and install
it there. In any case, do NOT install Exchange directly on either DC.
Set up DFS Replication or a Failover Cluster (still need to research this, but I had planned on DFS, thinking Cluster required shared drive, but Ed corrected me on this) between the two DC's for redirected files and keep all my user data folders between
the two servers. We don't need automatic failover, like with a cluster, a manual switch would be acceptable, but if no additional cost or risk to clustering the two DC's, then the auto-failover protection that provides would be better than DFS.
I think this incorporates all of your points, Ed. Does this sound right now? What's your advice on #5 (how to best migrate user data)?
Thanks so much for all your help,
Colin

Return 504 Gateway TimeOut when access exchange service by domain/user and password

hi,
here is the scenario: a user of our app is in ntdev domain, and his exchange server located at apj.cloudmail.microsoft.com. our backend api is deployed at the Azure servers at US West.
our api get 504 Gateway Timeout when calling the
FindFolders API of exchangeService. does anyone know how to fix this issue? the following is the core code:
var
service = newExchangeService(ExchangeVersion.Exchange2010);
service.Credentials =
newNetworkCredential(username,
password, domain);
service.AutodiscoverUrl(emailAddress, RedirectionUrlValidationCallback);
service.FindFolders(
WellKnownFolderName.Root,
newFolderView(1));

That doesn't sound like its an EWS issue more an issue with the Network path your trying to traverse to the Exchange Server. My suggestion is that you test EWS using the EWSeditor
https://ewseditor.codeplex.com/ (eg it sounds like you may have proxy server that expecting authentication etc.).
Cheers
Glen

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

HT4759 Completing Exchange info; Server, Domain, and Username?

Similar Messages

Maybe you are looking for