HT4759 I tried to download icloud for pc windows vista with 2.1.2. and when download was almost complete it said it belonged to another user unknown to me so I stopped the process how do I start over?

I tried to download icloud for pc windows vista with 2.1.2 and when it was downloading almost finished it said it belonged to an unknown to me user?

You need to explain that, before you finished downloading something said that it belonged to another user ?
What said that, can you post a screenshot?

Similar Messages

  • I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

    I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

    What is the exact error message?

  • HT201210 Hello, I wonder if you can help me. My iphone will not restore. I have downloaded all available downloads and the software and firmware restore was almost complete when the message similar to 'iphone restore failed' appeared. I cannot make or rec

    Hello, I wonder if you can help me. My iphone will not restore. iphone prompted restore in itunes I have downloaded all available Apple downloads and the iphone software and firmware restore was almost complete when the message similar to 'iphone restore failed' appeared. I cannot make or receive call

    Hi, Mangy1. 
    Thank you for using Apple Support Communities. 
    Here is the best resource when experiencing issues restoring your iPhone. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If the issue still persists, please reply back with the exact error message received. 
    Cheers,
    Jason H. 

  • I've really stuffed up the installation - how do I start over?

    This is turning into a nightmare. I purchased CC the other day and couldn't download any apps - I got the Download Error message that several other people have referred to. I read a few forums, tried verifying my address, logged out and in again etc etc, no luck. I couldn't download any apps: a Launch Application box would pop up saying "This link needs to be opened with an application." I'd select "Send to CreativeCloud URIHandler" and nothing would happen - I just went back to the original Download Error message.
    I decided to uninstall Creative Cloud and AAM and start from scratch, but somehow I have even managed to muck that up (probably by dragging it to the Trash rather than using the uninstaller). Now I can't reinstall Creative Cloud! I click on Download and it goes to a "Problem loading page" tab: It says "FIrefox doesn't know how to open this address, because the protocol (aam) isn't associated with any program. You might need to install other software to open this address". I have tried to fish AAM and CC out of the Trash - maybe I've put them in the wrong place?
    I just want to start over with a clean slate: grateful for any advice on how to do this. Otherwise I think I'll just cancel my membership (I can't even do that right now as I'm in the wrong time zone) and come back to this when I've calmed down a bit...
    Thank you.

    Run the Creative Cloud Cleaner Tool and fix your browser MIME-types/ protocol handlers by reinstalling it as well.
    Mylenium

  • How can i download icloud for windows xp

    i am trying to download icloud for my windows xp system, i didnt find installer anywhere,
    anyone have link, please send

    iCloud Control Panel isn't compatible with Windows XP, so you can't get your Photo Stream photos onto the PC, for example. However, you can still access to all the iCloud services in http://www.icloud.com. Just log in with your Apple ID and access to Mail, Contacts, Calendars, Notes, Reminders, iWork files, etc.

  • Can we stop the process chain in middle of the process ?

    hi experts,
        Can we stop the process chain in middle of the process after scheduled.
        my process chain is like  start--->load>psa>ods1-->further updates--->ods2. In this case I have already scheduled but i want to stop the process how can i. After rectifying the error I want to restart again.
    if it is possible what are the steps we fallow pl give me step by step procedure.
    thanks & regards.
    venkat

    stopping the process chain is pretty simple. you just need to kill the jobs associated to them as mentioned by other folks.
    for restarting, have a look at this blog.
    Restarting Processchains
    there he explains how to restart a stopped process chain.
    Raghav

  • Error 404 while downloading icloud for pc

    iphone
    problem : i can't download icloud for pc #windows 8 # because of error 404 on dawnloading page <i have a msg #sorry we can't find your page#<

    What OS are you running? That kind of message is usually generated in XP (service pack 2) due to DEP issues. (DEP = Data Execution Prevention). You may need to disable this feature.
    Try:
    Start > Control Panel > System > Advance > Performance Settings > Data Execution Prevention
    Watch out though, I hear XP has various issues on iCloud. You may want to upgrade to a more recent OS.
    Windows 7 is much better (don't bother with Vista).
    In general, try Googling these kinds of error messages. You can normally get to the bottom of things quicker by searching on the Web, rather than faffing around with Mac's tech assistance, especially when it comes to PC-related problems. In my experience the kids at Apple's Express Lane know very little about anything, and Apple forum users with truly helpful info are few and far between.
    Hope you fix your problem without too much trouble!

  • Unable to download adobe reader in windows vista

    I am unable to download adobe reader in windows vista.... upon going to download help, it just hangs looking for files to fix the issue

    Try this alternate download link http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.2/enu/AdbeRdr920_en_US.exe

  • HT4759 how can I download icloud for windows 8?

    I am trying to download icloud to my new VAIO with windows 8 , but i can´t.  need some helppp

    iCloud Control Panel isn't compatible with Windows XP, so you can't get your Photo Stream photos onto the PC, for example. However, you can still access to all the iCloud services in http://www.icloud.com. Just log in with your Apple ID and access to Mail, Contacts, Calendars, Notes, Reminders, iWork files, etc.

  • How to stop the process for some time

    I want to stop the process for some time can any one give the package or keyword or example for the same
    For suppose two programs A and B.. .B will run based on output of A. What i need is... When A is executed the process will stop for 5mins then B has to execute...

    You can use signals with DBMS_ALERT to "wake up" a procedure.
    Procedure A is something like this:
    DBMS_ALERT.REGISTER('B_FINISHED');
    do logic...
    when finished - send a signal
    DBMS_ALERT.SIGNAL('A_FINISHED','B you can start');
    now wait until B is finished
    DBMS_ALERT.WAITANY(...)
    continue logic hereAnd Procedure B is
    DBMS_ALERT.REGISTER('A_FINISHED');
    wait for a to finish
    DBMS_ALERT.WAITANY(...);
    do logic...
    when finished, signal A it can continue
    DBMS_ALERT.SIGNAL('B_FINISHED','A can continue');This is useful if u they need to wait for each other within the code. if they just need to wait - call B from A.
    Hope this helps.
    Edited by: Pyrocks on Nov 8, 2010 8:50 AM

  • HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

    HI ALL,
    CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
    cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
    THANKS
    HARITHA

    Hi,
    First and foremost let me advice you to be very careful while doing this.
    For Rescheduling
    RSPC> chain > Goto > Planning view and
    click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
    For terminating active chain
    You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
    The next step will be to go to targets that you were loading and remove the red requests from those targets.
    Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
    But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
    Re: Kill a Job
    Re: Killing a process chain.
    Regards,
    JituK

  • How to stop the process chain showing status as yellow but no process step

    Dear Friends,
    How to stop the process chain showing status as yellow but no process step is running in that process chain.
    We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
    Please guide me.
    Thanking you in advance.
    Regards,
    Shubhangi

    Hi,
      At times even I have faced this situation.  During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
    Regards,
    Raj

  • I have downloaded icloud for pc and sync-ed outlook with the account, however on my iphone i cannot get the mail for my two email addresses i have registered, any ideas please?

    Hello all,
    I have just bought an iphone and am trying to set up the two accounts to receive emails on my phone.
    I have downloaded icloud for the pc and have successfully uploaded all information to my icloud, and this is now reflected on the phone showing all my contacts etc, but when i click on 'mail' on my iphone its empty... I have two email addresses in which i need to receive on my phone at all times, any ideas as to why this isnt working?

    Just to add, i have also set up the two email addresses and verified them within my icloud account, but still no sync to my iphone or showing on the icloud account...

  • How to Stop the process chain if it in the middle of the process?

    Hi,
    Is there anyway that i can stop the process chain if it is in the middle of the process already?
    Raj

    "Hi,
    First and foremost let me advice you to be very careful while doing this.
    You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
    The next step will be to go to targets that you were loading and remove the red requests from those targets.
    Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
    But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
    Different Ways to stop process chain
    1)SM37 -->Kill Job
    2)SM50/sm66- ->Kill process
    3)RSPC>Job Log>Make the process RED forecefully.
    4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
    5)se37-->RSPC_API_CHAIN_INTERRUPT
    give RFC BW system name(technical) and process chain name(technical)
    Steps 1 -3 stops the chain running in process
    Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
    Rationale - 4-5
    This function will only remove the jobs from schedule, which did not yet run. It will not kill running jobs, as this may leave the system in an inconsistent state, moreover killing processes is possible for synchronous processes only anyhow. This means, that there will be no errors with interrupted chains, which on the other
    hand means an interrupted chain is not restartable. So for a running chain this function is intended to be an emergency break only. You can use it, however, to remove a scheduled chain from schedule, such that it does not start except by your product.
    Re: Kill a Job
    Re: Killing a process chain.
    How to stop a process in a process chain?
    Regards,
    JituK

  • How to stop the Process Chains?

    Hi Everyone,
       I have a process chian which is running daily, but i want to stop in a particular day( for ex on wednesday).The process chain has to run on remaining days.So how can i stop the process chain on the particular day. Please do answer me.
    Thanks
    Veerendra

    Hi Virendra,
    After start process , insert a node of abap program and insert program with following code .
    Report zntest.
    data : lt_attr like CASDAYATTr occurs 0 with header line.
    CALL FUNCTION 'DAY_ATTRIBUTES_GET'
    EXPORTING
       DATE_FROM                        = SY-DATUM
       LANGUAGE                         = SY-LANGU
      TABLES
        DAY_ATTRIBUTES                   = Lt_ATTr.
    write : / lt_Attr-WEEKDAY_L.
    read table lt_attr index 1.
    if lt_Attr-WEEKDAY = '3' . "3 Stands for 3rd day of week i.e. Wednesday
      message 'Process chains not to be run on wednesday' type 'E'.
    endif.
    Make sure that this ABAP program is linked to other processes only on  "Success",
    Hope that helps.
    Regards
    Mr Kapadia

Maybe you are looking for

  • How do i get itunes on my new laptop without erasing all the songs on my ipod??

         Well my old laptop had a short in it and everytime you went to open it the screen would go blank. I went to get if fixed but the guy said they couldn't fix it. So I got a new laptop and now I don't know how to download itunes on my computer with

  • NoSuchMethodError in findMethodInfo(__methodSig) in ejbc generated code

    Hi All, Happy new year! Does anyone know when weblogic.ejbc calls "findMethodInfo(__methodSig)" in its generated "*HomeImpl.java" classes? This is causing my code to end in a NoSuchMethodError exception. The generated code for the included beanManage

  • Apple TV does not appear as a listed "Device" in iTunes

    I just purchased Apple TV. It is working okay. I have two Macs synced with my Apple TV. One shows a "Device" in iTunes but the other does not. On the second computer, once Apple TV is loaded the device icon goes away. I am unable to access the necess

  • Trying to clear up disk space

    I'm trying to clear space on my hard drive, i´m using what size to find large files. It´s found in my home directory a temporary files folder containing around 4gigs of audio/video ts files, however i can't find these using a regular search. Why is t

  • Syncing apps after changing computer/itunes library

    I used to sync my iphone apps with computer A. Then I reformatted computer A, and decided to stop syncing apps anyways on that machine (a laptop with very little disk space). Computer B, which has always synced the iphone music, my desktop, is now ru