HT4818 I can't install drivers Nvidia Geforce GT120 Boot camp windows 7

I was using windows vista in Boot Camp, but now I installed windows 7. My problem is I can't install the drivers of the Graphic card  Nvidia Geforce GT120 using the CD drivers. However, I tried to download directly from the webpage Nvidia.com/drivers but at the moment to running the installation assistants, it doensn't detec any graphic hardware.
Please help me!
Thank you!

I can solve my problem! I used a programme called 3dchip that helps to the computer to recognize and install drivers!
Thank you mende1 for your time.
Nice to enter in your community!
Arn267

Similar Messages

  • Can i install a NVIDIA Geforce to a macbook pro 13"?

    Hi, I would like to know if I can install an NVIDIA Geforce to a macbook pro 13".

    Welcome to Apple Support Communities
    The 13-inch MacBook Pro comes with an integrated GPU that can't be replaced because it's required by the processor or that is soldered onto the logic board. There isn't any other port to connect a GPU, so you can't install another GPU onto the MacBook Pro.
    You may want to read this > http://www.macrumors.com/2013/07/30/11-macbook-air-owner-connects-high-end-graph ics-card-with-complex-thunderbolt-setup/

  • Can I upgrade to Mountain Lion with Boot Camp windows 7?

    Can I upgrade my mac book pro to Mountain Lion when I have Boot Camp Windows 7?

    Welcome to the Apple Support Communities
    You can upgrade to Mountain Lion without any problem, but I recommend you to make a backup before upgrading. Also, after upgrading OS X, I recommend you to download the most recent Boot Camp drivers on Boot Camp Assistant and install the drivers on Windows

  • [24" Imac, 10.5.3] Can't install Vista Home Premium on Boot Camp

    I'm having problems getting Boot Camp to run Vista.
    I set up a 32 GB Boot Camp partition with Boot Camp Assistant, and encountered no problems. Stuck in my full version of 32-bit Vista Home Premium (includes SP1), and then continued with the installation. iMac reboots, drive spins, and then all I'm left with is a black screen with a dos cursor blinking in the upper left corner. Doesn't respond to keyboard or mouse input. Will reboot into OS X no problem. Below is a list of the things I've tried to resolve the problem, but non have made any difference.
    * Booted from Vista DVD while holding down "c"
    * Turned off wireless Mighty Mouse & rebooted
    * Plugged MS wired mouse into keyboard & rebooted
    * Removed all attached USB and FireWire peripherals & rebooted
    * Ran Boot Camp Assistant, deleted partition, created new 32 GB partition, rebooted
    * Ran Boot Camp Assistant again, deleted partition, created 60GB partition, rebooted
    * Consulted apple.com/support/bootcamp and found nothing helpful
    * Consulted Support Discussions and could not find any threads dealing with the problem I'm experiencing
    Does anyone know how to solve this pesky problem? Advice and suggestions welcome.
    Thanks,
    R

    I would never go back to Vista, forums are where people ask for help. If you looked at the Leopard OS X forum you would definitely never want to upgrade or use Safari or TimeMachine or worry what the next Security Update or to iTunes harbors.
    Upgrading from Vista is supported but backup first, and a clean install is always going to be best. And the same goes for even Tiger to Leopard. Also needs to be the same 32 or 64-bit, going from one to the other is not supported.
    Some systems, and keyboards and such, are better supported than others. Windows 7 has support for a wide range of current hardware already.

  • Can I install a Nvidia GeForce GTX 660 into my HP laptop?

    Hi I was wondering if I could possibly install a new graphics card into my HP laptop? My laptop is a HP 15-d051sa 15.6" so you can search it up on Google.
    My specs:
    RAM: 8gb
    HDD: 1TB
    Processor: Intel(R) Pentium(R) CPU N3510 2Ghz (2mb cache)
    Graphics: Intel HD Graphics
    I think they're all the specifications I need to mention for you guys to help me. 
    -Thanks Zack.
    This question was solved.
    View Solution.

    No it cannot be done. The video system is part of the motherboard and cannot be changed. Even if you were to change to the best HP 15 motherboard it has graphics much less powerful than the GTX 660 and the motherboard swap would cost as much as the laptop did to begin with. 

  • Help! bootcamped window pro 7 ok BUT driver / setup flash drive seemed to correctly install drivers, nvidia etc etc BUT on windows login screen i have no mouse or keyboard , have plugged in logitech usb mouse and keyboard still no good please help

    Please can somebody help me with this.
    i cannot get any mouse or keyboard input on my login screen after bootcamping windows 7 pro.
    i used a correctly formatted drive for the driver downloads, they seemed to install but now i have no input method to login to wondows7.
    all is fine in osx apple wireless mouse keyboard magicpad ok
    windows cant login due to no input devices.
    have connected logitech mouse keyboard still nothing.
    please help!
    thanks in advance

    1. I have tried copying the Keyboard/Trackpad/Mouse drivers to the $WinPEDriver$ directory with mixed success on a 2012 MBP.
    2. My experience is based on a 2013 rMBP. You may be able to use an Apple USB Keypad/Mouse to better success.
    3. See http://www.macworld.com/article/2460820/macbook-pro-mid-2014-review-minor-update -offers-slightly-better-cpu-performance.html for HW differences between the two machines.
    4. If you have access to a 2013 rMBP, I can suggest trying to build the USB on that and working with the USB to see if you can make it install Windows. the rMBP 2014 and rMBP 2013 have the same HW, except some CPU changes. You can also try building the USB at the nearest Apple store, if possible.
    5. There is a section in AutoUnattend.xml, which is supposed to install all drivers in $WinPEDriver$ (see this http://support.microsoft.com/kb/2686316 )
    <component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <DriverPaths>
                    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
                        <Path>$WinPEDriver$</Path>
                    </PathAndCredentials>
                </DriverPaths>
            </component>

  • Can't connect to lcd projector in boot camp windows 7

    I have a 13" macbook pro with Intel HD graphics 4000 running 10.7.4.  When on the PC side the computer will not recognize the projector.  I have downloaded the latest intel drivers and still nothing.  I am using the same adapter that I used with an older mac pro running windows xp.  I believe it is DVI to VGA. can anyone help?  The projector does not seem to recognize the computer.

    Please see my post:
    https://discussions.apple.com/message/18284597#18284597
    I have a very similiar problem, but came up with a not so ideal solution.

  • Install SL OS and a boot camp as disconnected from internet?

    i am considering installing an install of Snow Leopard and Boot Camp Windows XP on a hard drive in my Mac Pro and i am wondering if i can keep this disk/OS disconnected from the internet.
    i am assuming that Safari and Mac mail will come pre-loaded with the OS but i am wondering if there is a way to keep this a very stripped down without all the annoyances of being connected.
    my other OS's are utilizing the world wide web in this machine.
    TIA

    Since I do absolute nothing with anything from Microsoft, I am going to have to guess here on that and say that I doubt it seriouslly.
    There must be a way to turn off the network under Windows I would guess in a similar way that I suggested for OS X is also my guess. Exactly how to do that would take someone more knowledgable with Windows then me. Sorry.
    Allan

  • HT203254 Can you find a NVIDIA GeForce 8600M GT graphics processors

    Where Can you find a NVIDIA GeForce 8600M GT graphics processors. I need one for my MacBook Pro 15" A1260.

    the GPU is soldered on the logic board. you would need to buy a new logic board.

  • In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

    in which boot camp support software I can install the drivers for win 7 32 bit.
    my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
    also my macbook pro model is MC723.

    Read this. You need to be running Snow Leopard or later.
    http://support.apple.com/kb/ht3986

  • Boot Camp won't update, no Bluetooth, can't install drivers, see OS X DVD

    I have a client who has a whole mess:
    Mac Mini Core2Duo running Leopard 10.5.6
    Boot Camp 1.4 Beta
    Vista
    Inserting the OS X DVD produces nothing, can't see it, can't open it, can't install drivers from OS X Install Disc 1.
    Can't update Boot Camp to 2.1 (update never executes no matter how long you wait after dblclick)
    No Bluetooth in Vista, anywhere. Mighty Mouse somehow works but no scrolling with the ball.
    Won't run Apple Bluetooth Installer.exe
    My only recommendation at this point is to delete the Windows partition and start from scratch, and put XP back on instead of Vista, hoping that we'll be able to update Boot Camp to 2.1 and put the drivers on from the OS X Install Disc 1 that came with the Mini. This is fairly difficult to explain or even comprehend on my part, and I've been doing this for decades.
    Anybody have a hint for me?

    Oh nevermind. I was doing this via remote and as it works out, some people don't know if they have Leopard or Tiger.

  • Can't install drivers. unknown error

    gents,
    I suddenly can't install drivers so that my new iLok and my Logitech USB-Dongle aren't working. I did a backup of all drivers from another Win7x64 systemdrive and extracted them. The Drivers were working on that system and am there.
    Still I got a FILE NOT FOUND or similar error.
    I checked the SETUPAPI.DEV.LOG which I copied below. Can anyone see what's the problem with the iLok driver f.e. ?
    [Device Install Log]
    OS Version = 6.1.7601
    Service Pack = 1.0
    Suite = 0x0100
    ProductType = 1
    Architecture = amd64
    [BeginLog]
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    . inf: {SetupCopyOEMInf: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.097
    . sto: {Import Driver Package: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.098
    . sto: Importing driver package into Driver Store:
    . sto: Driver Store = C:\Windows\System32\DriverStore (Online | 6.1.7601)
    . sto: Driver Package = d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf
    . sto: Architecture = amd64
    . sto: Locale Name = neutral
    . sto: Flags = 0x00000000
    . sto: Copying driver package files to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'.
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
    . flq: SourceFilename - 'ilok-x64.cat'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
    . flq: SourceFilename - 'WdfCoInstaller01007.dll'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
    . flq: SourceFilename - 'oem43.inf'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
    . flq: SourceFilename - 'iLokDrvr.sys'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {_commit_file_queue}
    . flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=4
    . flq: {_commit_copy_subqueue}
    . flq: subqueue count=4
    . flq: source media:
    . flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok]
    . flq: SourceFile - [ilok-x64.cat]
    . flq: Flags - 0x00000000
    . flq: {_commit_copyfile}
    . flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\ilok-x64.cat'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
    . flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\ilok-x64.cat'
    . flq: {_commit_copyfile exit OK}
    . flq: {_commit_copyfile}
    . flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
    . flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\oem43.inf'
    . flq: {_commit_copyfile exit OK}
    . flq: source media:
    . flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
    . flq: SourceFile - [WdfCoInstaller01007.dll]
    . flq: Flags - 0x00000000
    . flq: source media:
    . flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
    . flq: SourceFile - [WdfCoInstaller01007.dll]
    . flq: Flags - 0x00000000
    . flq: {_commit_copyfile}
    !!! flq: Error installing file (0x00000002)
    ! flq: SourceFile - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll'
    ! flq: TargetFile - 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'
    . flq: {SPFQNOTIFY_COPYERROR}
    !!! sto: Failed to copy file 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll' to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'. Error = 0x00000002
    . flq: {SPFQNOTIFY_COPYERROR - returned 0x00000000}
    !!! flq: SPFQNOTIFY_COPYERROR: returned SPFQOPERATION_ABORT.
    . flq: {_commit_copyfile exit(0x000003e3)}
    . flq: {_commit_copy_subqueue exit(0x000003e3)}
    !!! flq: FileQueueCommit aborting!
    . flq: {_commit_file_queue exit(0x000003e3)}
    !!! sto: Failed to copy driver package to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'. Error = 0x00000002
    . sto: {Import Driver Package: exit(0x00000002)} 21:18:40.125
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    ! inf: Add to Driver Store unsuccessful
    !!! inf: returning failure to SetupCopyOEMInf
    . inf: {SetupCopyOEMInf exit (0x00000002)} 21:18:40.251
    !!! ndv: Driver Package import failed for new device...installing NULL driver.
    . dvi: {Plug and Play Service: Device Install for USB\VID_088E&PID_5036\3088A22A_7C39126D}
    . ump: Creating Install Process: DrvInst.exe 21:18:40.266
    ! ndv: Installing NULL driver!
    . dvi: Set selected driver complete.
    . dvi: {DIF_ALLOW_INSTALL} 21:18:40.333
    . dvi: No class installer for 'iLok'
    . dvi: No CoInstallers found
    . dvi: Default installer: Enter 21:18:40.334
    . dvi: Default installer: Exit
    . dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 21:18:40.334
    . dvi: {DIF_INSTALLDEVICE} 21:18:40.334
    . dvi: No class installer for 'iLok'
    . dvi: Default installer: Enter 21:18:40.335
    ! dvi: Installing NULL driver!
    . dvi: Writing common driver property settings.
    . dvi: {Restarting Devices} 21:18:40.351
    . dvi: Restart: USB\VID_088E&PID_5036\3088A22A_7C39126D
    . dvi: Restart complete.
    . dvi: {Restarting Devices exit} 21:18:40.562
    . dvi: Default installer: Exit
    . dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 21:18:40.563
    . ump: Server install process exited with code 0x00000000 21:18:40.567
    . ump: {Plug and Play Service: Device Install exit(00000000)}
    . ndv: {Update Driver Software Wizard exit(00000002)}

    update. I also post the SETUPAPI.APP.LOG:
    [Device Install Log]
    OS Version = 6.1.7601
    Service Pack = 1.0
    Suite = 0x0100
    ProductType = 1
    Architecture = amd64
    [BeginLog]
    [Boot Session: 2014/12/29 20:54:19.610]
    >>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
    >>> Section start 2014/12/29 21:18:39.855
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    cpy: Policy is set to make all digital signatures equal.
    <<< Section end 2014/12/29 21:18:39.857
    <<< [Exit status: SUCCESS]
    >>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
    >>> Section start 2014/12/29 21:18:39.862
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    cpy: Policy is set to make all digital signatures equal.
    ! sig: Verifying file against specific (valid) catalog failed! (0x80096002)
    ! sig: Verifying file against specific Authenticode(tm) catalog failed! (0x800b0100)
    <<< Section end 2014/12/29 21:18:40.093
    <<< [Exit status: SUCCESS]
    >>> [DIF_SELECTBESTCOMPATDRV - USB\VID_088E&PID_5036\3088A22A_7C39126D]
    >>> Section start 2014/12/29 21:18:40.093
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    <<< Section end 2014/12/29 21:18:40.093
    <<< [Exit status: SUCCESS]

  • I can`t install drivers for Promise IDE on WINXP.

    Hi, guys. I have a problem. I can`t install drivers for Promise IDE on WINXP. I `ve got an error "This device cannot start. (Code 10)". In Norton Ghost (DOS) drive on Promise work fine. I can`t install WINXP + SP1 on HDD on Promise controller. After pressing F6 and installing driver i `ve got an error Can`t find drive. BIOS 193 beta. Devices: IBM 120Gb 180GXP on primary master, Seagate 120 SATA 26AS on Third master. CD-ROM and DVD-ROM on secondary channel. Drivers 1.00.1.37 from ASUS and 1.00.1.29 from MSI. No result.
    And another one. Why very poor perfomance when copying large files (700Mb). When starting copying speed is 25-27Mb/sec, when finishing 5-8Mb/sec. All drives under NTFS.
    PS. Sorry for my bad english.

    Quote
    Originally posted by Athlon1000
    But if you have selected Promise as: SATA in BIOS shouldn't you then use the ulsata.sys driver instead and if you choose Promise as: RAID in BIOS then you should use the f2tx*.sys, or am I way wrong here ?
    That's correct  
    So if I do not misunderstand you, Windows hangs when accessing the drive?
    Is it only with this drive, then maybe it's an incompatibility between the controller and the ata electronics of the drive.
    Or maybe it's completely broken.. have you tried it on the ICH5 IDE controller?
    If it works there you should use this configuration.
    I've read about problem with some drives ... take a look into the threads on the top of this board (FAQ etc.).
    What I found out yesterday: You can use the Promise in RAID mode and define a RAID0 array with only one single drive. So you could use the Fasttrak driver from MSI, which is up to date.
    I haven't tried this solution (one disk in a RAID0 stripe configuration), but I think it should work...
    Maybe you give it a try  
    PS.: Before you switch to RAID mode, you have to change the Promise Driver... but be careful: windows won't boot with the wrong driver - your last chance would be "last known good" then...

  • Can't install drivers on Windows XP

    I just installed Windows XP SP3 on my Bootcamp, but couldn't find my OSX discs (Leopard) to install the drivers. So I searched on apple.com and came across this http://support.apple.com/kb/DL830
    At the bottom of the page was this
    Note: This download contains complete copies of Boot Camp Windows XP Drivers (version 2.1).  If you have Boot Camp drivers already installed, it will update them.  If you do not have any Boot Camp drivers installed, it will install version 2.1 drivers onto your already installed Windows OS.
    So I downloaded it, put it into my hard drive booted into Windows, but couldn't install it. Clicking it didn't work at all. I went into task manager, at processes it was running, but not doing anything.
    Any idea why it's not working? Or do I have to install version 2.0 of the drivers first?
    Thanks.

    Ivannzz wrote:
    I just installed Windows XP SP3 on my Bootcamp, but couldn't find my OSX discs (Leopard) to install the drivers. So I searched on apple.com and came across this http://support.apple.com/kb/DL830
    At the bottom of the page was this
    Note: This download contains complete copies of Boot Camp Windows XP Drivers (version 2.1).  If you have Boot Camp drivers already installed, it will update them.  If you do not have any Boot Camp drivers installed, it will install version 2.1 drivers onto your already installed Windows OS.
    So I downloaded it, put it into my hard drive booted into Windows, but couldn't install it. Clicking it didn't work at all. I went into task manager, at processes it was running, but not doing anything.
    Any idea why it's not working? Or do I have to install version 2.0 of the drivers first?
    Thanks.
    Yes, and they are not downloadable, you need your original OSX disk

  • Need driver for Nvidia Geforce Go 6150 for Windows 7

    Hi, can anyone please tell me where I can download the driver for Nvidia Geforce Go 6150 for Windows 7. I have tried the drivers for Windows Vista but it does not work. Thanks in advance.

    I followed this tutorial after installing Win7 on a friend's HP Pavilion tx1332LA (the tutorial is in Spanish):
    http://www.taringa.net/posts/ebooks-tutoriales/2570715/NVIDIA-nForce-Chipset-Driver-(windows-7-_-vista).html 
    And since the coprocessor was no longer listed as an unknown device (or something similar), I assumed everything worked correctly afterwards... is that alright or do I have to check in some other way? 
    Well, here is a part of what the tutorial says (what was enough for me):
    -Should work for 32-bits and 64-bits versions (I installed it on Windows 7 x64).
    -First of all, we see that in the Device Administrator, there is an unknown device, a coprocessor. That's because Windows 7 can't find its driver.
    -Download and install the following:
    NVIDIA nForce Chipset Driver
    ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39535.exe
    and see if the coprocessor is recognized.
    -If not, go to the Device Administrator and find the unrecognized coprocessor.
    -Right-click on it and select Update driver...
    -Select browse my computer -> let me pick -> have disk (this is what the tutorial says, it wasn't exactly the same for me, but I eventually got to pick a folder on my hard drive)
    -Browse and select the following (assuming C represents the drive where everything from the file above got unpacked):
    C:\swsetup\SP39535\WinVista32\SMU\smuc.inf (for 32-bits version)
    C:\swsetup\SP39535\WinVista64\SMU\smuc64.inf (for 64-bits version)
    Note: That is what the tutorial says, but I could only select the SMU folder and not a specific file. After selecting the SMU folder, a driver was automatically listed, I selected it and it got installed.
    -Now, the coprocessor should be recognized (check the Device Manager).
    Hope it helps!
    Pixzeto
    (PD: HP, the graphical editor on this forum sucks on Opera 10.01)

Maybe you are looking for