HT4889 Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?
Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?
See Pondini's Setup New Mac guide for possible answers.
Similar Messages
-
When transferring data from an older iMac to a newer iMac (refurbished) do the Apple applications like iWorks replace the ones on the newer computer?
I have read how to transfer data and using setup assistant but I am concerned about applications from Apple having the same names.As you likely know legacy apps that are PPC based will not migrate over. However the data files will. I would urge you to inventory the apps you have and their data files to see how important they are and then look app by app to see what app replacements are available. If you are using Office for Mac prior to the 2008 version you will need to get a new license of the app because the 2004 version was PPC based. The files will come over and are readable by newer version of Office for Mac (I recommend the 2011 version) and also readable by the iWorks apps (Pages, Numbers, Keynote) but those are different apps than Office and work differently and do not have all of the features of the MS Office apps. This is really only a issue if you share files with MS Office users, if you use them for personal work then iWork may be just fine for your needs.
-
HOW DO I TRANSFER DATA FROM MY IMAC TO MY NEW MACBOOK PRO? I tried it with an ethernet cable and it seems to go OK till it gets to applications. From there the time it takes to complete seems to increase rather than decrease!
That's the easiest way, this side of using Time Machine. The time it takes to transfer files between our computers ka vary but while doing it on my MBP I had to leave it plugged in for near 24 hours and it was supposed to take 3.
-
HT1386 I need help getting my contacts transferred from my old phone to my new one
I need help getting my contacts transferred from my old iphone to my new one
Either backup the contacts in iCloud or with a compatible programme on your computer (Outlook, Windows Contacts, Address Book etc).
Once done, sync the contacts to your new iPhone from that programme/iCloud.
Read "Contacts"
http://support.apple.com/kb/HT1296
http://support.apple.com/kb/HT4859 -
I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?
Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have ebooks on my ipod and when I'm listening to a story it will not go to the next chapter, it just starts over again with the chapter I just listen too. How do I correct this? It didn't do this before.
ebooks is a term for (mainly) textual books that can be read on screen. If you're listening then I think you mean audiobooks. See audiobooks on iPods. Either reorganize as single files or access via a playlist.
tt2 -
I need to merge my files that were transferred from my old mac to my new mac - for some reason I now have 2 separate setups on my new mac. I need everything merged to one account.
Thanks!Did you use Migration Assistant? If you set up your new Mac first, you created a user account and when you used MA later, it transferred over the old one. The only way to avoid that is to use Setup Assistant at the beginning of the setup. I used MA once and spent a long time getting rid of duplicates - you can either do that manually or start over: use recovery (Command + R or Command + Option + R keys) during startup, go to Utilities > Disk Utility, erase your disk and download/install again. While going through the setup, use Setup Assistant - it will port over your one and only user account rather than create another.
-
have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?
I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011 -
I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?
Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton -
Hi! I just bought a new iPhone and I was wondering how i can make sure all my pictures and music will be transfered from my old iPhone to my new one?
Pictures are held in the iPhone backup. If you backup the old device just prior to the activation of the new one, then restore from that backup, the photos will be there. Music is in iTunes on the computer and when you do the restore, it will download the music from iTunes to the device during the restore. Make sure any music purchased on the iPhone that has not been transfered to iTunes on the computer is done before beginning the restore.
You can also view information in this support document http://support.apple.com/kb/HT2109 -
What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?
What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?
I have a Firewire cable and Thunderbolt adapter, but no icons showing either Mac appear on either desktop.The fastest way is to use Carbon Copy Cloner and a external drive formatted GUID OS X Ext. J in Disk Utlilty, then connecting to the new Mac and using Migration Assistant in the Utilites folder.
Even faster, if you can determine your going to replace all the apps from fresh sources anyway (like if the older Mac's OS X verison is old thus the apps) then just use a external drive and copy just your files to it, then connect to the new Mac and transfer over.
Some apps you can just grab the registration code and install it fresh on the new machine with the old code, talk to the developer about transfering the program, as long as it's deleted on the older Mac in the process.
It used to be Firewire Target disk mode was fastest, but since Thunderbolt came out...
Notice this support doc hasn't been updated since june 2012, no Thunderbolt info
https://support.apple.com/kb/HT1661 -
If I copy the Itunes folder from my old pc onto my new one in the music folder will I be able to sync just as if it were the old one? This is from a Widows Vista machine to Windows 7.
I suspect design rather than a bug, it's too useful. The behaviour seems to have been consistent for quite a long time on both Windows and Mac machines...
Here are the typical layouts for the iTunes folders:
In the layout above right, with the media folder (everything in the red box) inside the library folder, the library will be portable. A portable library can be moved from one path to another, or even between Windows & Mac computers, without breaking the links between the library and the media, and being self-contained is much easier to backup (You do backup, don't you?). Anything that isn't stored inside the media folder must stay put or be restored to precisely the same path on a new machine or iTunes won't know where to find it. Within the media folder the relative paths from the library to the media remain unchanged and iTunes can cope even when the absolute paths are updated.
Should your library not be in the usual layout I've written some general posts on how to make a split library portable or I can give specific instructions on request.
tt2 -
I cannot get my iTunes library/music from my old computer to my new one. The old computer is so messed up that I cannot even open a browser.I tried to copy to an external hard drive and the music was there until I went to upload to the new computer. I disconnected my old computer so I will have to reconnect it I am sure. thank you for any help. Last time I transferred I used a product I purchased. That was a long time ago.
First of all make sure that you've definitely backed up the movies to your external hard disc.
In iMovie click on any event you don't want, go to the file menu and select 'move event to trash'. Then do the same for any unwanted projects - 'move project to trash'. Quit out of iMovie and empty the trash.
Hope that helps! -
How can I get my data from a old iPad to a new iPad using iCloud and not iTunes
How can I get my data from a old iPad to a new iPad using iCloud and not iTunes
Restore from the iCloud backup - assuming that you were backing up to iCloud in the first place. If you weren't using iCloud for backup - then you are out of luck.
If you were backing up to iCloud - you have to erase all contents on the iPad in Settings>General>Reset>Erase all content and settings - before you can restore from the iCloud backup.
Read this article before you do anything else
http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/ -
I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac
You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
http://support.apple.com/kb/HT4718
Maybe you are looking for
-
How to convert string to 16 characters.
My external unique id is too long, more then 30 characters. How to convert it to 30 characters using sql?
-
How do I connect my laptop to the printer by wireless? This question was solved. View Solution.
-
Using the sd card slot to import photos from digital camera?
Can't figure out how to use the sd port on my macbook to imports photos from my camera?
-
All AAC Audio Files Lower After 6.0.2 Update
Just checking to see if anyone has had this problem before. I did the update two days ago (6.0.2) and noticed that my AirPort Express output was noticeably lower afterwards. I checked through my iTunes Library, "Get Info", and discovered in "Summary"
-
Still trying to get old saved voicemail from deceased mom. Doesn't go back far enough....what to do?