HT4972 i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?
i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?
Would this matter then? can you not update the 3g to the lastest software?
Similar Messages
-
why can't I download from kuler, my computer doesn't recognise the .ase files its says its an unknown format, can anyone help please?
why can't I download from kuler, my computer doesn't recognise the .ase files its says its an unknown format, can anyone help please?
-
Trying to download an app, from my computer, onto iphone, but it is grey (not connected) so won't download. Any ideas? Tks
you install apps to an iphone by
connecting the iphone to your computer and starting up itunes
clicking on the iphone under devices
clicking on apps tab
checking on the app in the list of apps
thats the only way to install apps to your iphone anything else you attempt will fail
because thats not how you install apps -
I have a new iphone 5c. How can I turn off the passcode. Unlike previous models it does not show Passcode under settings - general !! Can anyone help? Susie
Thank you Chris. Yes I did know that but it was not clear how to turn it off. All the forums visited said it was under general. I have since found a site called iAnswerGuy which describes how to turn it off step by step. Thank you very much for coming back to me so quickly. Susie
-
I tried to download some Apps from the English shop but am apparently not allowed to do that. I am prompted to switch back to the Spanish shop.
Unfortunately I do not remember how to do that. I cannot even update my existing Apps. I cannot find anything in Settings to get back to the
Spanish store. help!!!
BambiSettings > Stores (or iTunes and App Store) > Apple ID > View Apple ID > enter password > Country/Region
-
I'm trying to download an app on my iPhone, however I'm being told that the terms and conditions have changed and i must look at them before i can download. I've gone through the terms and conditions multiple times and i can't find an 'accept' option?
Hello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
Hi - I'm trying to download an app to my iphone but it says my password or ID is not recognised. I've changed my password and it works on my laptop. I think it could be because the ID on my phone is googlemail while on my macbook it's gmail - how do I change the apple ID on my phone?
Many thanks!
davidAnswered in the other thread you posted in:
i am trying to download new software and my mac keeps asking for the administrator name and password... i enter my apple…
Please don't post in more than one place. It can lead to people wasting their time answering a question which has already been answered elsewhere. -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
i got an iPad and all my app's, music, and movies are on it, but when i try to download some apps to mi iPhone, they doesn't appear on the purchased tab, how could i move them back to itunes so i can access thru iCloud? i have an 2nd generetion ipad and an iphone 5, thanks for you answers!
(I think the daughter got he better end of the deal!) I believe if you change the password and user id one of the devices it will stop that from occurring. But I'm not the one to tell you how to do it; someone like "Illaass" (Illaass seems to know how to correct / fix almost anything!) will know how if you don't. Just look for the "cat" icon.
-
Ive downloaded some apps onto my pc yet only 1 has synced to my ipad, it says something about theres a problem with my billing, yet I purchased the 1 app I got for $20, but 1 free app and another paid, wont sync, i di have money in my account
Right click on your iPad's name in the iTunes app on your computer and choose to transfer purchases. That should transfer anything that you have bought with the App Store app on the iPad to the iTunes app on your computer.
-
i am not able to sync some videos and apps onto my iphone 3gs. it shows a sync error: 0xe8008001.i updated it but still i am getting the same sync error problem..please help.
amanAre you using Windows...?
-
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
Im trying to register my applecare protection plan for my iphone 4 but when i enter my reg numbers for the plan and my phone im told that there is no sevice in that area can anyone help Please ?
Try this https://expresslane.apple.com/GetproductgroupList.action
-
Trying to download an app on my iphone but is saying my apple id has been disabled
im trying to download an app on my iphone but it keeps popping up with a messages saying my apple id is disabled... any help?
Contact iTunes support for assistance. Start here:
http://www.apple.com/support/itunes/contact/ -
Can anyone help please with this download error?
Is this on Wi-Fi or Cellular data?
What happens when you switch from one to the other?
Has the device been restarted?
What about Settings > General > Reset > Reset Network Settings?
Maybe you are looking for
-
LKM SAP BW to Oracle (SQLLDR) generates sintax error in ABAP code.
Hi Experts, We are installing a SAP BW KM's in ODI 11g. Actually, we are able to make reverse ingeneering succesfully. Now we want to use the LKM in order to extract SAP data. The KM fails, in step Generate ABAP Code. The code is uploaded to SAP syst
-
Restrict Number of Open line items selected for vendor payment in F-58
Dear Experts, simply in F-58 i want the system to issue an error message if the user select more than 10 or maybe 15 open line items for payment, the reason is to make sure that the number of line items selcted will fitt in the From specified for pri
-
Hi, I wrote a script logic like this for Dynamic varibales. {Code} *XDIM_MEMBERSET TIME =2009.FEB,2009.MAR *XDIM_MEMBERSET C_ACCT= 12110600 *XDIM_MEMBERSET C_CATEGORY = C_100 *WHEN C_ACCT *IS "12110600" *REC(EXPRESSION=%VALUE%/1.5098,RPTCURRENCY="EU
-
Dear All, Till yesterday we were having around 100 concurrent portal users and portal was running fine, as sson as the user base went to 300 the portal started giving 500 internal server error. Our basis persons optimised the R/3 and set max users to
-
Hi Experts, OBIEE 11.1.1.6.0, the mutipdatasoure is ESSBASE 11.1.1.2 In Essbase databases we use the "code" as the Member name and the "description" in the Alias, when we click the Alias name in answer for drill down horizontally, it will generate th