HT4972 i keep getting error code 3014 trying to update and then restore my ipad. any ideas?
error code 3014. wont update and then wont allow ipad to restore
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
From above link:
Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom
Similar Messages
-
I keep getting Error 17 when trying to update to 7.0.4 iPad Air
I keep getting Error 17 when trying to update to 7.0.4 and the Ipad stays in USB Mode
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Message was edited by: Texas Mac Man -
I cannot empty my tarsh and keep getting (error code -8003). Is there any way to override it and get ride of my trash?
Greetings,
If you dragged items from a TimeMachine backup drive to the trash then that is most likely the cause of the issue. Do not move files from the TimeMachine backup into the trash (http://support.apple.com/kb/HT1427).
If your backup drive only contains a timemachine backup then you will want to reformat that drive:
http://support.apple.com/kb/TS1600
Keep in mind that before you reformat the backup drive that you remove any files you wish to keep to your computer.
Cheers. -
I have spent the last 2 hours trying to get CC to update and/or reinstall. Changed firewall settings as per Adobe suggestions. Thank goodness the apps I have installed still work, but I am not able to update! Becoming more irate with each attempt! Adobe PLEASE HELP!!!!
Meowia for Error 201 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html. Error 213 indicates there was problem locating the update or an incorrect URL. The troubleshooting steps are still the same as both errors are related to failure of the current network connection.
-
My iPad says it has to restore to update, but it will not. It is caught in a cycle of not being able to restore but needed to restore. I keep getting error code 3014 but I can not figure out what this means! nor can I do anything about it! So Frutrated!
Also...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
HT201210 keep getting error 3194 when trying to update ,what is this
keep getting error 3194 when trying to update,what is this
error code 3194 http://support.apple.com/kb/TS3694 Do you have the lastest version of iTunes? if not update.
-
Keep getting error 4002 when trying to update Genius
I haven't seen anyone write about getting error 4002 when trying to update genius in itunes. I select update genius and it gathers information and sends it to the itunes store I assume. And then waits a few seconds and then I get the following message "Genius results can't be updated right now. An unknown error occurred (4002) Please try again later." I've been getting this message for well over a month and I keep hoping they'll be an update or somehow it will magically be fixed, but nothing has changed. Anyone have any insight on this one?
The current ituned library it 123GB and is stored on external drives. It should also be noted that when I first turned on genius when it was released it went through this whole problem without a hitch. I just can't update Genius with any of the music I've added since then. I can't even get genius to recognize music that I got from the itunes store since I've had the problem.Be careful - this was a disaster for me. Once I did this, I got a different error - an error 4010 and in trying to recover, caused a lot of library issues that forced me to go to a backup to fix. You'll find a lot of people having the 4010 problem. Basically iTunes Genius is a disaster and Apple isn't fixing it.
-
Why do I keep getting error message when trying to update iPad with ios7?
Keep getting error message ios7 won't validate? Can I reset iPad and download again? Will I lose data on iPad if reset?
NMAYO,
In your project view can you right click on the chassis in the cRIO and make sure that it is set for Scan Mode and not FPGA mode? Also, In the measurement and automation explorer you can check the cRIO and verify that it has Scan Engine Support installed on it. The tutorial below shows how to reformat a cRIO and install software on it, the later steps on software will allow you to check your cRIO.
Reformatting a CompactRIO Real-Time Embedded Controller
Ben Sisney
FlexRIO V&V Engineer
National Instruments -
ipad locked on itunes plug in screen. i followed the instructions, plugging it into my laptop to backup and keep getting the back up failed message. checked my itunes to make sure i had latest version. Tried to backup and then restore, both failed. How can i just get this screen off of my ipad and start using my ipad again?
ipad locked on itunes plug in screen. i followed the instructions, plugging it into my laptop to backup and keep getting the back up failed message. checked my itunes to make sure i had latest version. Tried to backup and then restore, both failed. How can i just get this screen off of my ipad and start using my ipad again?
-
HT201210 keep getting error message when trying to update iOS to 5.1.1
I have had no trouble updating the several iPads under my charge at work, however can't update my own. Am using iOS 5.1 currently on original iPad. I go to settings and it looks for any updates available and I click install to 5.1.1 but keep getting error message saying there was an error when trying to update. I am on my home wifi on my iPad. Have done same procedure with about 5 other iPads with no trouble. What can I do?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
TS3694 I keep getting error code 3014 when trying to update my iphone to iOS6
Anyone have any idea why this is happening? It also happens with my ipad.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
Trying to inistall itunes keep getting error code 2330 need help unistalling and reinstalling
Im trying to install itunes but keep getting an error message. (The installer has encountered an unexpected error installing this package, this may indicate a problem with this package. Error code 2330
I need some resolution please assist. I did call microsft but they want to charge just to get help. I need assistance please.
Thank youAlthough it's a better bet with a 2330 than a 2349, I'd try running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I keep getting error mess when trying to update iPod touch 4 gen to new ios7
I keep trying to update my iPod touch 4th generation and I get an error message or I get a message saying iOS 6.1.3 is up to date but I want to get ios7
You cannot update an iPod Touch 4th Gen to iOS 7....
GB -
Keep Getting Error 1053 when trying to update/reinstall itunes
I tried to update Itunes and keep getting the same error message about Apple Mobile Device failing. I have tried to start/stop AMD without any luck. I have uninstalled multiple times and restarted multiple times. Just need help to get my Itunes restored.
Hi there JonR0670,
You may find the troubleshooting steps in the article below helpful.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
iv been trying forever. iv done everything the internet says and i just dont know how to do it anymore. this is my last resort.
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Try on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I missing in Snow Leopard the pop-up menu with settings for Better Battery Life, Normal, Better Performance, or Custom. And I can't find this options in Energy Saver System Preferences pane. Why not? I need it!
-
How do I get my bookmarks back, I downloaded version 4.0 that said it is compatible with all versions of OSx. Which it is not!!! So now it won't start FireFox, before I do anything else how do I get my bookmarks back?
-
Can you put Mini Dvds in the Macbook Dvd Player?
I would like to know this before I try it and make a costly mistake. I am trying to get the video off of a Sony Handycam.
-
Error trying to use load-externs in a module project
Hi: I am trying to implement modules in my application. I have read the documentation and learned that if i want to reduce the size of my modules i have to use the link-report and load-externs compiler options (the first in the main project and the s
-
My firefox crashes or closing unexpectedly when a try to download a file
Mi navegador mozilla se bloque o se cierra cuando intendo descargar archivos. Eso me está pasando desde que se instaló la actualización 5.0.1 del navegador. Ya se han enviado decenas de reportes pero no he encontrado solución aún y la verdad me está