HT4972 what must I do to upgrade my 4.3.3 ipad 2 to the latest version? I have tried several times on my windows pc but it will not let it finish.
It will update for about 10 minutes and when it starts proccessing file it gives me a message that it is unable to complete to check my connection or try later.
If you are getting a network timeout error then try temporarily turning off all your firewall and antivirus software until the download has completed.
Similar Messages
-
My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?
have you tried charging the device ?
if so and it still does not work you can try a Forced Recovery..
by holding the HOME button down and plugging it into your computer at the same time..
http://support.apple.com/kb/HT1808 -
ive got the iphone 5s 4 weeks ago.today the screen turned blue and the phone turned off . i tried several times to turn it on but i doesnt work even by using the power and the home button. what should i do ?
Hi vanessato,
Thanks for visiting Apple Support Communities.
I recommend these troubleshooting steps if your iPhone does not turn on.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy -
I have upgraded to 10.6.8 and have purchased Mountain Lion 10.8.2 but it will not let me install until I have 10.8.0 and I cannot find the download or a way to get it anywhere. What do I do to upgrade? Thanks for the help!
Yes... Thank you.... the first 10.8.2 was not the full version from the app store... all good! Thanks Allen.
-
I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?
I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner -
PURCHASE PROGRAM
When I filled in my credit card details and proceed to Step 4: Enter your payment information, so nothing happens. Have tried several times. This order applies to the upgrade of CS4 and costs 270,60SEK per month.
Does not this offer?
Micke at RaaSome general information... your Adobe account and your credit card details must match exactly
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
-verify email https://forums.adobe.com/thread/1446019 -
When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.
The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update. -
HT5858 I do not have a password on my ipad, but it will not let me in without one. What do I do?
I do not have a password on my ipad, but it will not let me in without one. What do I do?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission." What does this mean? All files are closed; this iMovie project is the only thing open. Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
Thanks,
JamieHi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
See also this post
https://discussions.apple.com/thread/4434104?tstart=0
Yours Bengt W -
I recently downloaded ios 6.1.3 in my iphone 3, but unable to install the download. This message keeps showing "unable to install update, an error occurred installing the ios 6.1.3 I have tried several times but the same message keeps coming. What is the solution?
There is no such thing as an iPhone 's3'. There is a 3G which can only be updated to iOS 4.2.1 and a 3GS which can be updated to iOS 6.1.3.
Which model iPhone is this?
Identifying iPhone models -
Im trying to drag and drop a email group from contacts to a new email message. But it will not let me in OS X Mavericks. Before I upgraded I could do this.
I just posted this fix to another thread and thought it might be useful to post to all of the threads I read trying to fix the problem. Here it is:
Having the same issue over here with Mavericks 10.9.1 on a new Macbook Pro/Retina. Just now found a workaround/fix/whatever:
- click on your group in the group pane of the address panel
- click anywhere in the name pane and select all (command + a)
- click the "To:" or "Cc:" or "Bcc:" tab right above the group pane at the top of the address panel window.
The names of all of the individuals in the group will appear as an expanded list in whatever field you clicked. It takes a second or two to happen. -
If someone could help out, it would be greatly appreciated
AnnoyedAppleUser2 wrote:
I was recently trying to buy 'Cloudy With a Chance of Meatballs' for my IPad, but it will not let me purchase the film, what is the problem and how can I fix it?
If someone could help out, it would be greatly appreciated
What does "it will not let me purchase it" mean exactly? Are you getting an error message? -
i have upgraded ipad with the latest version of ios. However, while restoring backup from itunes to ipad, a password is being asked. i do not have password, how to go about?
Restore from iCloud Backup
1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Enable Location Service
9. Select network, enter password and join network
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Selected Restore from iCloud Backup -
I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back. I tried re installing quicktime but it will not let me??
Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".) -
I am using ipad2 with the latest version. While trying to make a apple Id, In the payment information cannot get the option of "none" what will I do. Please help.
You are following the instructions on this page for creating a new account : http://support.apple.com/kb/HT2534 e.g. selecting a free app in the store and tapping on 'create Apple id' when 'buying' the app ? I've just tried it and it works for me
Maybe you are looking for
-
Infoset query of vendor payments at the cost distribution level of the document
We would like an infoset query of vendor payments at the cost distribution level of the document. The issue seems to be joining vendor to the document cost distribution lines. 1.) BSAK + BSIK can be combined with an infoset data structure but only
-
HT2646 Do I need 2 HDMI cables to hook up my HD TV
I just bought an AppleTV to allow us to view Netflix on an HD TV but I'm a bit confused about how to set it up. My first question has to do with the HDMI cables, currently there is already one that connects the cable box to the tv but it looks like t
-
Error occurred saving the cache
I'm creating an AIR application using the Model Driven Development tools and hoping to make use of the offline cache. The generated value objects and services are working well when connected but I have been unable to get the cache working. Currently
-
ADS does not work.(Service call exception)
Hi All, According to SAP note 937697 "Usage of SAP NetWeaver BI Diagnostics & Support Desk Tools", when running the tool, it gives following error: ADS does not work.(Service call exception; nested exception is: com.sap.engine.services.webservices.ja
-
Is there a chance to change data from row to column and vice versa just by a click. Need to have the data of the rows in horizontal view in the table.