HT5022 When I tried installing this software, I get this error: "The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance." Any idea why? My computer is Mac OS X Version 10.7.5
When I tried installing this software, I get this error: "The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance." Any idea why? My computer is Mac OS X Version 10.7.5
What software are you trying to install?
Similar Messages
-
On Mac OS X 10.9.5
After downloading CC from http://www.tss.qld.edu.au/itdepartment/AdobeCreativeCloud.aspx
The .zip download is fine.
The installer runs but stops half way through (during "running scripts") and gives the error message in the pic below
The installation failed - The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance
ANY HELP HUGELY APPRECIATED. I have know idea what to do
Thanks
SteveSince you did not download from Adobe, I don't think Adobe can help
When I clicked the link you provided, it LOOKS like your school has created custom install packages... so check there -
While trying to re-install Mac OS X, appears the following screen:
Install failed
Mac OS X could not be installed on your computer
The installer encountered an error that caused the installation to fail.
Contact the software manufacture for assistance.
Click Restart to restart your computer and try installing again.You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility. -
The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance. what can i do to download software when the above message keeps popping up...not allowing me to download
I had the same problem this weekend. The iphone 4s needed Itunes10.5 to sync to her Asus Windows 7 Laptop. When I tried to download from the Apple website I got the error that the windows installer was missings files or something like that. I uninstalled itunes and tried again but that didn't work. Then I redownloaded itunes 10.3 just to have a working version in case I gave up. Then I found site that suggested I update Windows by going through the start menu and while doing that I found an update Apple itunes file.
Goto Start and type Widows Update in the seach window. Click on check for updates (I already was current with all updates but I suggest you download the updates if there are some available.
Goto start and this time just type update in the search window. Look for the Apple itunes update link and click on it. It found there were updates for itunes 10.5, Quick time, Safari, and Icloud. I checked all the updates except for Safari, since we don't use it (yet).
The install started then seemed to stall at one spot for ~3min but then completed successfully. I open itunes and had her synced with Outlook Contact, Email, Calender, and Notes in 5 minutes. I did already configure Outlook by going to tools and Trust Center.
I hope this works. -
when trying to install itunes and i get a error that says there is a problem with this windos installer package. a prodram required for this install to complete could not be run. contact you support personnel or package vendor
I have the same problem
-
When I tried to update Itunes I get an error message that MSVCR80.dll is not available? How can I fix this? I am unable to update my iphone and Ipod. I can not open Itunes.
Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98954) -
I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
Does anyone have any suggestions, please ?Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
Not a comforting message to see...
Here are the errors just before the above message is emitted and the install ends.
Jul 26 05:33:33 localhost OSInstaller[344]: PackageKit: Extracting file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/Essentials.pkg (destination=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, uid=0)
Jul 26 05:34:51 localhost OSInstaller[344]: PackageKit: Got copier error 2 extracting to path ./usr/lib/zsh/4.3.11/zsh/zselect.so: Read-only file system
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/DataPool.c:135: Error: finished pool without filling it
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/commonUtils.c:360: Error: fh_pread -1
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :294: Error: pread failed for /Volumes/i7Mac/.OSInstallSandbox-tmp/Root//usr/lib/zsh/4.3.11/zsh/zselect.so: Undefined error: 0
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :928: Error: returning errno 22 from FinishStreamCompressorQueue
Jul 26 05:35:33 localhost OSInstaller[344]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"} {
NSFilePath = "/Volumes/i7Mac/.OSInstallSandbox-tmp/Root";
NSLocalizedDescription = "An error occurred while extracting files from the package \U201cEssentials.pkg\U201d.";
NSURL = "Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg";
NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=1 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\" UserInfo=0x7f8360d47220 {NSLocalizedFailureReason=FinishStreamCompressorQueue error, offset=2847022, type=BOMCopierFatalError, sourcePath=/Volumes/Mac OS X Install DVD/Packages/Essentials.pkg, destinationPath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root}";
PKInstallPackageIdentifier = "com.apple.pkg.Essentials";
Jul 26 05:35:33 localhost OSInstaller[344]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"}
Jul 26 05:35:34 localhost OSInstaller[344]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
If I boot to the "Recovery HD" I get a message "Installation Failed, Try re-intalling" Which would be a fine idea, but I can't because if I re-start installation from the hard drive I get the above errors.
I've burned the "InstallESD.img" to a DVD, but it also doesn't seem to work. Comes up as though I'm in the RecoJen,
Here's what I did to get Lion installed:
Burn the installer to a DVD and install from there. It worked for me. Here's what you need to do:
First you need another computer running at least 10.6.8.
1. On the other computer go to 'App Store' (make sure you're logged in to the App Store with the AppleID you used on the troubled computer)
2. Click on 'Purchased' in the 'App Store' window's toolbar
3. If you are on 10.6.8, and haven't downloaded Lion on that computer just click "Install" to download the installation application.
3. a, if the other computer is already running Lion, you'll need to re-download the installer.
3. b. Hold down 'Option' when selecting 'Purchased' then you click "Install"
4. When the Lion Installer starts up, just quit it. You want to work with the Installer application.
5. Find the "Install Lion OS X" application in the 'Applications' folder.
6. Hold down 'Control' and click on the application and select 'Show Package Contents'
7. Find 'InstallESD.dmg' which is in the "Shared Support" folder and copy it to your desktop.
8. Burn 'InstallESD.dmg' to a DVD ('Disk Utility' is simplest to do this).
9. Put the new install DVD into the computer that has Lion partially installed and reboot holding down the "C" key.
10. run the installer as normal, selecting your harddrive as the target.
In my case, when it rebooted to the harddisk the Lion installer started AGAIN. If this happens, let it run. Then you should be done.
Hope this helps. -
my app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?
I am having the exact same problem. MacForums has been helping me, and I called Apple. After trying everyone's suggestions, and Apple's, no success.
My App Store app still says "incomplete or damaged." There is even a circle with a line through it on the icon. Apple said reinstall my Snow Leopard upgrade disc (not my original Leopard disc) and then run the Combo Update (like your suggestion). Did not work. I also updated the software from "Software Update". Rebooted.
I think this started after I replaced my hard drive with a SSD and moved the hard drive to where the DVD was. I wonder if the person above who had the same problem also installed a SSD?
Anyway, anymore ideas? Even Apple is stumped.
(In answer to the other post above, my Quicktime works fine.)
Message was edited by: mrivmriv
Just did some more reading. I was going by the icon in the dock. When I checked in Finder, there it was, fixed and brand new!! Thanks, anyway.
Message was edited by: mrivmriv -
What does THAT mean!!! Appears when trying to download the new Itunes!!!
Any ideas??
"Installer could not install some files in "/". Contact the software manufacturer for assistance." ?????????????????????can someone please help!!! I can't install anything on my mac!!! And my iphone isnt even showing up in itunes when i plug it in!
-
Just upgraded software. When system prompts to update itunes and in the middle of the system's attempt to complete the upgrade, the message, "The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance" appears.
I don't understand what "preupgrade" needs to be done.
Anyone else experience this?
Suggestions?-= Pre Upgrade Script Error with iTunes =-
Do a general web search and you will discover there are many answers, none definitive.
iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier - http://support.apple.com/kb/ht1747
scarier:
https://discussions.apple.com/message/10464515#10464515 -
I have an IPAD 3 and recently updated the IOS software with the latest version and now video from some sites will not display where it did prior to the update. When I go to those same sites on my other IPAD that I did not do the softward update the video still works. Any idea why and what to do to fix it?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
Cheers, Tom -
Any application I install on my MacBook Pro gives the message "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance" What can I do?
Well that's one. Try the Microsoft help forums: http://www.microsoft.com/mac/support It's their application.
Name another. -
I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?
-
I have attempted to update a few apps and the install has frozen on 'waiting' not allowing me to either access the app or delete it, any idea why this has happened and how do I get around it?
See if either of these things works for you. In the future ... Only update one app at a time. Forget that the Update All button even exists. It causes more problems than it does good - IMO.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
Maybe you are looking for
-
I tried conecting the airport to my psp, but it says error can't find #(forgot the number), it found the base, and the pppoe but there still an error... Also I tried resetting the airport to no luck . laptop Mac OS X (10.3.9)
-
I don't really understand cookies and all that so please write plainly how to go back to my old Firefox way of not having to type in every thing every time. I have Hotmail. I have juno. I have Facebook.
-
Community Nugget 4/08/2007 Action Engines
Action Engines, What are They? “An action engine is Ben's term for a functional global which includes extra actions other than just holding the data.” (tst , 03-13-2007 01:18 PM) In a nut shell tst has nailed it except for the “Ben’s term” part. I w
-
Resizing images published through flickr, but I don't want it to.
I set up a flickr connection with LR3, very cool. However it resized the image to 1024x768, though I have nothing set under 'resize'. Why is it doing that? Do I have to set it to resize everything to 9000 pix and not enlarge for it to keep the origi
-
After upgrading from Logic 6 to 7 I get the following strange behaviour: When I start up Logic by double-clicking a song file that contains EXS24 instruments, the samples are loaded twice (according to the Progress window). Anybody else have experien