HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works 

Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works  can you help

Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

Similar Messages

  • Received notice to update software on my 24" iMac - after it re-booted, all i get is a whit screen.  Have tried turning it off, then on - still the white screen.

    Received SW update notice (from Apple) this morning for my 24" iMac.  After it re-bootd, all that appeared is a white screen - no icons, just white.  I re-booted, again - just a white screen.

    Start up using your original install discs by inserting the disc and holding the C key while rebooting. Run Disk Utility to repair the drive and restart. If everything goes ok run Software Update again.

  • I have just updated to Lion and now my folders no longer show number of items on the bottom. Is there a fix for this?

    I have just updated to Lion and now my folders no longer show number of items on the bottom. Is there a fix for this? I allways found that handy. Now I have to click on an icon on the top, This is a backward step if that is now the only way to see the number of items. Am I missing something obvious?

    Parrotcat wrote:
    I have just updated to Lion and now my folders no longer show number of items on the bottom...    
    In the good old days of Snow Leopard, an open Finder folder had a border along the bottom of the window which could show the number of items in that window and the total available space on the hard disk or partition that folder resides on. That bottom border is gone in Lion and those two bits of information are gone with it. Is that what you're talking about? If so, I'd like to learn how to get it back too and "Show Item Info" is not the way.

  • I've just updated to Lion and aperture 3.4.1. I'm finding the slideshow is coming on automatically and then it crashes. Anyone know how to solve this?

    I've just updated to Lion and aperture 3.4.1. I'm finding the slideshow is coming on automatically and then it crashes. Anyone know how to solve this?

    Try resetting PRAM.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Best.

  • I just updated to Lion and my Microsoft Word, Excel and PowerPoint will not open because PowerPC applications are no longer supported. I bought this software from Apple and the store installed it when I bought the MAC. What do I do?

    I just updated to Lion and my Microsoft Word, Excel and PowerPoint will not open because PowerPC applications are no longer supported. I bought this software from Apple and the store installed it when I bought the MAC. What do I do?

    Buy version 2011 of MS Office.
    Or you can download OpenOffice, LibreOffice or NeoOffice, which all come very close to working with MS files just like MS Office does.
    Or iWord, I have heard, you can purchase.

  • I just upgraded from snow leopard v10.6.8 to os x mountain lion and my scroll bar has disappeared on all my applications on the internet. does anyone know a patch to get the scroll bar to work.

    i just upgraded from snow leopard v10.6.8 to os x mountain lion and my scroll bar has disappeared on all my applications on the internet. does anyone know a patch to get the scroll bar to work.

    Open General preferences in System Preferences. You can set the desired scrollbar behavior there.

  • I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?

    I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    I've also seen it suggested that people try downloading a free app from the store onto the iPad (as that seems to reset something), and then re-try the apps - the free app can then be deleted.

  • Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    ****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
    http://www.apple.com/support/systemstatus/

  • When i active my mac pro all i get is a white screen and  it loading .. and when it fully loaded it turns off and the same thing keep on happening again

    when i active my mac pro all i get is a white screen and  it loading and when it fully load its turn off , and it keep on doing the same thing for hours

    Hi Shahenaz,
    It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
    I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
    Follow these steps to try and troubleshoot/fix the problem.
    1. Boot into OSX Recovery Mode
    First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
    Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
    Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
    Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
    2. SafeBoot
    Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
    Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
    If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
    3. Fsck!
    For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
    Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
    fsck -fy
    and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
    1. "The volume (your Mac) appears to be OK
    or
    2. "File System Was Modified"
    If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
    If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
    If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
    Step 4: Reset the NVRAM
    The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
    Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
    I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
    Well I wish you luck, I hope this helped you!

  • How do you fix your ipod touch when you stop it in the middle of when its updating its software. all i get is a white screen or a screen with lines running down it. please help!!

    this happened when i was updating it from ios 5.0.1 to 5.1 i had to stop it before it was done updating and now all i get is a frozen screen.

    - Try a reset:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then connect to computer and try to restore via iTunes.
    - If screen remains on (white, has lines etc), let the battery fully drain. After charging for an hour try the reset and restore as necessary.

  • My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.

    My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.Help pleaseeeeee!

    You can work through the five 5 R's of troubleshooting to rule out the possibility of corrupted software.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damaged part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?

    After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?
    == This happened ==
    Every time Firefox opened

    -> press '''F11''' to bring the computer out of FullScreen
    -> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
    -> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
    -> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted/Incompatible Toolbars
    -> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
    -> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
    Now Restart Firefox. Check and tell if its working.

  • My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

    My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

        Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

  • After "restoring" my MacBook Pro via time capsule, all I get is a white screen with the apple in the middle and the little spin wheel spinning and spinning and spinning for 24 hrs now...

    After "restoring" my MacBook Pro via time capsule, all I get is a white screen with the apple in the middle and the little spin wheel spinning and spinning and spinning for 24 hrs now...

    Hello kdcha55,
    Thanks for using Apple Support Communities. 
    To troubleshoot this issue where your Mac is stuck on the gray screen with a spinning gear, please follow the steps in the support article linked to below.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Take care,
    Alex H.

  • Updated to Lion and can't access my own website?

    I recently update to Lion and now I can't access my own website, no matter what browser I use.
    I can access the site fine from my work PC, but can't from home and this started after I updated to Lion.
    Help?

    Shawnnafromwa wrote:
    I created it using Wordpress.  It is hosted by Accuweb.
    http://www.shawnna.org
    I can't access my cPanel or just the website itself.  I can't access the admin panel for the Wordpress workings either.
    And it all worked fine until I updated to Lion.
    Any help you can provider would be very helpful.  My host is claiming they can access it fine so they aren't able to help.  They verified my IP isn't blocked on their end.
    And I can access it straight away in Safari.Do you have any anti-virus or third party programs, especially secrity related installed?
    Can you access any other sites you regularly go to?
    Is your Wordpress program up to date to be compatable with Lion (check developer's site)
    Pete

Maybe you are looking for

  • How to access tables/views of an external database provider..

    After much trouble I finally managed to setup a second Database Provider that doesn't display the "0 out of 0 connections are good" error by filling in the "Configuration Class" field with "intradoc.server.DbProviderConfig". But now the problem is ac

  • Change URL of a portal

    Hi, I have create a portal page, which I would like to make available under a different URL. In stead of http://sever:7778/pls/portal, I would like to use e.g. http://my_application. How can I obtain this?

  • OS X 10.9 - autocorrect characters disappeared with upgrade

    Has anyone else noticed that the autocorrect information they had set up in 10.8 disappeared when they upgraded?  Rebuilding mine now. Special characters window has changed too. The mini window is nice but to get to features you need one needs to cli

  • Why wont PS CS5 open NEF files from a Nikon D600

    I have PS CS5 and I recently updated my camera to a Nikon D600. I shoot in RAW and when I tried to open photos to edit, PS said I needed to update my Camera Raw plugin. I found the most recent plugin for CS5 and photos still won't open What do I need

  • Printer ink

    I have hp printer all in one psc1210. its working very well, but recently one of three colours is not seeing when I print even the colours cartridges is full.