HT5148 how do i take my edited video from final cut pro and save it to my hard drive

how do i take it from the program and save it as a .mp4

Select File>Share>Masterfile and ensure that H.264 is selected.

Similar Messages

HT5148 export video from final cut pro x

how can i export / share video from Final cut pro x (10.0.7)? i have try different type and even use compressor, but did not see any final product.
thanks

I went into File and then share and then choose the format that i want (master file - default) then i choose a second hard drive in my computer. and nothing happens at all

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

Burning a video from Final Cut Pro using iDVD

When I export and save my video from Final Cut Pro to a folder (export->Using Quick Time Conversion). When I do that there are several different videos that are saved in my folder (ie-Kelly Michelle; Kelly Michelle-av1; Kelly Michelle-av2; Kelly Michelle-av3; Kelly Michelle-av4; Kelly Michelle-av5).
iDVD is the program I need to use, I do not have any other programs. Therefore, I import the file to iDVD and once everything is ready in iDVD I try to burn the dvd. However, in the last stages of burning a window pops up and says that "an error was found during the burning process". It does not tell me what kind of an error it is. Does anyone have any advice or a step by step process that I need to do in order to burn my dvd successfully.

The simplest way to prepare a video for iDVD is to *Export/Quicktime Movie* (NOT Using Quicktime Conversion), select Current Settings, Audio and Video and, depending on your needs, other 2 options:
o- +Make Movie Self-Contained+ is preferred to have an independent movie (you can move the exported file, you can continue editing your FCP project before burning the exported version, etc.) but requires more disk space and more time for exporting.
o- +Chapter Markers+ (NOT All Chapters) must be selected if you created Chapter Markers in FCP (markers in the timeline, not the clip, and clicked the Add Chapter Marker button in the marker dialog).
The resulting .mov file (whether self-contained or reference) may be easily imported to iDVD.
Piero

What compression to use when Exporting HD video from final cut pro PAL setting

Hi there
I'm trying to export my HD video from Final cut Pro so that I can edit it in DVD studio Pro. I initially exported it on H.264 setting however it then gives me the message 'NTSC assets cannot be imported into PAL projects' It was edited with PAL setting so I think it must be the conversion but i'm not sure which option to use.....been really struggling to get the 1 hour footage under 4.5gb without losing too much quality...
Any advice greatly appreciated!
thanks

Just to add two suggestions.
1) Consider putting your four movies on two disks.
2) Bring your movies into Compressor and duplicate the stock DVD setting. In the Encoding pane of the Inspector, select a CBR and dial it back to around 6.2 to 6.5 Mbs. In Preview mark a small section and submit; you'll get 2 elementary streams, with m2v and AC3 extensions. Bring that into DVDSP and evaluate results. Adjust as necessary. (This is to avoid waiting out very long encodes and then having to start again from scratch if you get disappointing results.)
Russ

How to play an HD movie exported from Final Cut Pro?

How to play an HD movie exported from Final Cut Pro? on a mac???
thanks

How to play an HD movie exported from Final Cut Pro? on a mac?
Most FCP users export them in a high-effeciency distribution/delivery compression format (e,g,, H.264/AAC) targeted for a particular application and/or device. For example, you could export using H.264/AAC at full display resolution for playback in the QT Player at an appropriate data rate if your platform and display can handle the output. TV would limid the video to 960x540 at 30/29.97 fps and normal AAC audio to 160 kbps at 48.0 KHz. Files exported for display an the Internet would be restricted by the bandwidth being targeted. Etc, etc, etc. Unless the file will only be played on your own platform, what you do not want to do is use an FCP only compression format which would limit viewers to those recipients have the same FCP codecs installed.

Can't Export Video from Final Cut Pro

After updated to OS Maverick, I can no longer export video from Final Cut Pro.
It pops up "The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
ANYONE CAN HELP??

10.0.2, I think this is where the problem is.
I will update to the latest (10.0.9) and update this thread to see if this will resolve my problem.

Exporting a Video from final cut express and uploading to vimeo

I film with a Sony FX-7 in 1080HDV and would like to know the specific settings of how I should export my video from Final Cut Express to vimeo to be played in HD mode on a vimeo account.

I looked that link up but my video seems to be running pretty slow, here's the link to the vid http://vimeo.com/20580561
Do u have any advice on what I should change for the settings?

How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

Hi
I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
Here are the settings:
HD:
1 Video CODEC                 XDCAMHD50
2 Wrapper format           QuickTime Self-Contained
3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
4 GOP                                   Long GOP
                                             Closed GOP
5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
6 Movie version               UK Home Video Version
7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                          1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
2 Resolution                      1280 x 720
                                           1920 x 1080
3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
5 Chroma format              4:2:2
1 HD audio format           24 bits/sample 48 kHz sampling rate
2 Track layout                    Track 1 – 2.0 Stereo L mono
                                            Track 2 – 2.0 Stereo R mono
                                            Track 3 – L
                                            Track 4 – R
                                            Track 5 – C
                                            Track 6 - Low frequency effects LFE
                                            Track 7 – L Surround
                                            Track 8 – R Surround

First of all, what are your sequence settings? Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this). Do you have a surround sound mix?
You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs.
Do you understand about safe zones for graphics? If not, post back.
I don't see any option to set the GOP in xdcam in compressor. This may be built in to the xdcam format.
I don't see any option for 720 xdcam hd in compressor.
There are many other tools available for this kind of work, but they may be out of your price range. You might want to just find a facility with experience in deliverying this sort of thing.

How can I get MPEG-2 video into Final Cut Pro X?

Hello! I have several MPEG-2 video files on which I need to perform some edits. When I tried to import them into Final Cut Pro, I learned that Final Cut Pro can't import MPEG files. Okay, so I went into QuickTime and exported one as 720p. 20 minutes later, I had a video that I could load in FCP. Awesome. Except that when I watched the video, the audio was waaaaaaaay out of sync. So, is there a different way I could get this MPEG-2 video into a format that FCP will like while keeping video and audio together?
I would keep trying a few different things without direction, but these videos are like 90 minutes long and the conversion process is lengthy.
Thanks!

Although I looked up the equipment, I couldn't find what kind of MPEG2. I'm assuming program stream.
I don't know why you had the sync problem with QT. You could bring it into FCP and detach the audio and manually line it up it's off by a constant amount.
Or you can use MEG Streamclip. You will also need the playback component, which is $20. Follow the instructions on the Squared 5 site to install it. Streamclip is worth having even if you don't use it this time around.
Good luck.
Russ

How to compress/adjust imported videos in Final Cut Pro and iMovie?

Left: what the video looks like when played in iPhoto or Quicktime (Dimensions: 960 x 720, Codecs: AAC, H.264) .mov
Right: what the video looks like when played in iMovie or Final Cut Pro.
SOS

the left shot is 4:3 (960/720)
the right shot is a 16:9 project (1920/1080 or 1280/720) with a stretched-to-fit 4.3 video.
If you want an un-stretched project, set it to 4:3 manually when you create a New project, or use the transform-tool and resize the video - which will add bars l/r or chops-off t/b of the video...
or use the Spatial Confirm settings in the Inspector ...

Can't Export Any Videos From Final Cut Pro X?

Hello all-
I just downloaded FInal Cut Pro X today, and as I tried exporting my first video to YouTube, I found I had no luck. I am able to select the option to export to YouTube, enter in my account details, edit the video preferences, but when I click submit nothing happens. The little export box just disappears. This happens for every single one of my share options.
Anyone have any ideas on how to fix this? I'm a little peeved that I just spent 300 dollars on a software that doesn't even let me export the video.
Thanks much,
Megan

Did you open the background task window?

I can't export video from final cut pro trial

I'm currently using final cut pro trial.
i have finished a project, and tried to export the video.
There's not "share" on tool bar, but there' one under "file" toolbar.
To share, i have to add destination, but I can't add any destination

The Share button is in your image. It's the last button in the toolbar and it appears active in your screen shot.

How do I create some black video in Final Cut Pro?

I am new to fcp having moved from premiere how do I create some black video in fcp please
Thanks
Derek

Drew's right - and another way is to go to the same "film strip" (generator) to the right bottom corner of the middle box (called the Viewer) and select "Matte" > "color". It is grey by default, but in the viewer under Control you can select black. This way of making black will not lay in audio tracks, only black on the V1 - video track, (unless you have select another video track.

Can I import a video from Final Cut Pro

I'm doing a :45 sec. video clip in Final Cut and Kinemac for a local church. They want pre-recorded backround music that fades out at the end. Can I import this video into GB for the music..
Thanks.
NN

What do you mean by "this video"? The FCP file? No, but any rendered version: Show the video track in GB and pull the video over.
The question is: Why would you want to do this? If it's just about fading out the music, as you write, FCP will happily do that for you.

HT5148 how do i take my edited video from final cut pro and save it to my hard drive

Similar Messages

Maybe you are looking for