HT5304 what is the best way to connect my imac wireless with airport express or directly plugged into airport unit

what is the best way to connect my imac to internet via airport express. wireless or ethernet plug to airport? thanks

Hello quinstar,
It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
HT4356 Can I use personal hotspot as wifi to connect printer?
https://discussions.apple.com/thread/4007254
Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

What's the best way to connect two imac's with shared internet connection?

Hi
I plan on purchasing a new iMac (likely 2.4 GHz Intel Core Duo - 20 inch, probably will have leopard) and would like to set it up so I can share files and internet connection with my older iMac (1.25 GHz Power PC G4, 768 MB DDR SDRAM, using Tiger Version 10.4.11). I plan on using the Airport Extreme Base Station. I have a exterior cable modem for high speed internet through Shaw (internet provider) and my ethernet connection is through that.
I've heard a few things about this set up, but there are mixed reviews on everything. Would it be better to connect the Airport Base Station to my older iMac and then connect to the internet wirelessly through my new iMac or vice versa? I've heard some of the older iMac's have slow Airport Cards so thinking maybe should use my new iMac for wireless. One computer will be upstairs and the other downstairs.
There must be a few people out there who've done this, so any assistance would be great. Thanks for your help.

Would it be better to connect the Airport Base Station to my older iMac and then connect to the internet wirelessly through my new iMac...
Yes
This would allow the old iMac to use a 100 Mbps Ethernet connection while the new iMac can use a 802.11n wireless connection.
The old iMac only has 802.11g (54 Mbps) wireless capability.

For optimal sound, what is the best way to connect an iMac to a high end stereo system?

If the answer is wired rather than through an Airport Express, what is the best way to wire an iMac to a good stereo? Is there any way to do it other than through the headphones out jack?

Morning Acousticare,
Thanks for using Apple Support Communities.
Thunderbolt cables should not exceed three meters for maximum performance. The Apple Thunderbolt to Thunderbolt cable (2.0 m) is two meters in length.
For more information on this, take a look at this article:
About Thunderbolt to Thunderbolt cable (2.0 m)
http://support.apple.com/kb/HT4614
Hope this helps,
Mario

What is the Best way to connect CRM Case Management with EP-KM?

Hi Gurus,
We will implement a Case Management in CRM 7.0 EHP2 and EP 7.31 with KM.
The Client needs Clasifications and Search of the documents in Case Management, the number of documents could be 1,000, 000 aprox...
I thing are 2 options :
1) The documents are stored in CRM Repositories, and KM access him, (I know this is posible using WebDAV repositories), but I do not know if this could affects in some way the process in Case Management. And if CRM repositories can store the huge volume of documents.
2) The documents are stored in KM Repositories, and CRM access him.
     -¿Is this posible?.
     -¿CRM can access the documents without problem?
     -How can store the documents to KM on line from CRM Case Management?
What is the best solution?.
Please Help.
Best regards.

Hello quinstar,
It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
HT4356 Can I use personal hotspot as wifi to connect printer?
https://discussions.apple.com/thread/4007254
Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
Thank you for using Apple Support Communities.
Take care,
Sterling

What is the best way to connect a MacBook Pro to my HiFi system ?

Hi,
I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5 CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ?
I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
Thanks in anticipation of some advice.

What is the best way to connect a MacBook Pro to my HiFi system?
Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
The Mac's analog audio in/out ports doubles as a optical in/out ports.
The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

What is the best way to connect my new MBP to monitor - DVI, VGA or HDMI

What is the best way to connect my new MBP to a computer monitor? DVI, VGA or HDMI? Thanks

I recommend the Apple MiniDisplay Port to DVI adaptor. I would avoid VGA. MiniDisplay Port to HDMI will work as well (3rd party).
http://www.apple.com/search/?q=dvi%20adaptor&section=mac&geo=us

What's the best way to connect the audio out of my Mac to my stereo receiver?

I want to listen to my mp3 collection through my home theatre stero receiver.
I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
I even hear these flaws when I listen to headphones through the headphone out of my mbox.
Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
I got this one from monster thinking it should work. No dice.
So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
Why might I be getting these clipping distoritons?
any advice would be fantastic

It depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
http://www.apple.com/itunes/airplay/
I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
http://www.apple.com/airportexpress/
You can even find refurbished ones on Apples website for about $79.

What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

If you want to connect 2 Displays you must do it one with the Minidisplayport and one by HDMI if you have a Retina 13 Inch. i think the old MBP doenst have HDMi Out

What is the best way to connect MBP 13" - (non retina) to HDMI TV input

What is the best way to connect MBP 13" late 2012 - (non retina) to HDMI TV input
...To get Video and Audio? With one cable ...
I'm seeing that the "rocketfish" adapter is not handling the job (from these forums).
I enjoy watching youtube videos, hulu, etc on the big screen through my laptop. The other Windows laptops I'ved had from Sony, HP, Dell, all had HDMI and was easy peasy.
I don't have the patience to buy and return 10 different types of adaters (nor would Best Buy appreciate that)
Thank you!

Look for something like this:
http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADY9 I/ref=sr_1_6?ie=UTF8&qid=1356715728&sr=8-6&keywords=cable+displayport+to+hdmi
Ciao.

What is the best way to connect PumpWorks to Labview? DDE or OPC

What is the best way to connect quizix PumpWorks to labview?
PumpWorks share data using Dynamic Data Exchange (DDE),what is the best way? To use an OPC Server betwen labveiw and pumpworks or DDE?
Solved!
Go to Solution.

Hi.
If the instrumet can communicate with an OPC server I think both methods are fairly equal.
There is a chance that you might have to reinstall LabVIEW without OPC server if you choose DDE, as it is known that it might conflict with the DDE server.
http://zone.ni.com/devzone/cda/tut/p/id/4531
http://zone.ni.com/devzone/cda/tut/p/id/7450
-Tom

What is the best way to connect my ipad to the high-speed Internet connection in a hotel room

what is the best way to connect my ipad to the high speed inernet connection in a hotel room

every connection is a bit different. Generally, connect to the wifi, then you may need to open Safari, and may even need to try to get to one of your bookmarked pages to trigger the 'agree to our terms' page to come up.
As to it kicking you off every so often, there are sometimes glitches with the wifi on iPads, you can also be subject to any programming the hotel has. Like I've noticed various places that only allow you to log on for a period of time before having to relogin.
most hotels have 1-800 numbers, so you can always try calling that to see if their tech support has any tips for the frequent disconnection issue.

What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

It should be possible to network them easily.
Ethernet will be the most straightforward. There is no question that you can plug both Macs into a normal network and they can share files if you turn on File Sharing.
The iMac has a Gigabit Ethernet port, and if the G4 also has Gigabit Ethernet, that will be a very fast connection through a gigabit-capable Ethernet cable or router. Otherwise both can use the slower Ethernet speeds with no problem.
You can also network the two machines via a FireWire 800 or FireWire 400 cable if necessary, and use File Sharing that way too. Finally, you can put one Mac into FireWire Target Disk Mode, which turns it into a hard disk that the other Mac can see, but this is the least flexible since one machine goes out of service, and it's probably no faster than Gigabit Ethernet.

What is the best way to connect macbook running sling adapter to the tv

what is the best way to connect macbook running slig adapter content to the tv

Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

Much depends on the available connectivity of your television.
If it has HDMI input available, all you will need is a minidisplayport to HDMI adapter, and an HDMI cable long enough to place the Mac in the desired proximity to the TV. The adapter is avaialble from the Apple Store online.
Provided the HDMI input on the television supports sound, and the model of your MBA supports it as well, make suree that your adapter is also supportive of sound, otherwise you will need to run separate cabling from the headphone jack of the MBA to TV sound input or external speakers.
This is a somewhat specific answer to a question without any requisite detail. You don't indicate the model or type of inputs on your TV, nor do you indicate the model/generation of MBA you have.

What is the best way to connect macbook air to present power point presentations

What is the best way to connect macbook air to present power point presentations

Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

HT5304 what is the best way to connect my imac wireless with airport express or directly plugged into airport unit

Similar Messages

Maybe you are looking for