HT5312 is a rescue email the same as adding an email
When adding an email address in my apple id account, is that my rescue email?
An alternate email isn't the same as a rescue email.
(96625)
Similar Messages
-
How do I create a rescue email address with in my Apple ID account?
If you know the answers to your security questions then follow steps 1 to 5 half-way down the HT5312 page that you posted from, they will let you add one.
If you can't remember your answers then you will need to contact iTunes Support / Apple in your country to get the questions reset before you can then add a rescue email address for potential future use.
Contacting Apple about account security : http://support.apple.com/kb/HT5699 -
i can't buy any thing because i forgot my both security question and resuce emial address please help to get out from this problem PLEASE!!!
If you don't know your rescue email account (you won't be able to view/change it until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down the page that you posted from to view/change your rescue email address for potential future use, or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
HT5312 Not receiving rescue emails.
I have forgotten the answers to my security questions, so I have requested a rescue email. These emails do not come through at all.
To confirm my email, I have added it as an alternate in my profile. This came through within seconds and was verified.
Am I doing something wrong?This issue is often reported here.
Call AppleCare for your country and requesy help resetting the questions. -
HT5312 forgot my rescue email address please help
how to recover my rescue email address
If you can correctly answer at least two of the security questions, follow the instructions in that article. If not, you need to contact Apple, either through the link in it or by phoning them and asking for the Account Security team.
(80350) -
HT5312 Not receiving rescue email
After trying tirelessly to send email to rescue email address, I still have not received an email from apple. Please help I have a gift card I would like to use can't because I can't remember the security question passwords since I have moved and upgraded my phone but will not have internet for another day or two which I could access iTunes from my mac but I would like to access iTunes from my new iPhone.
Please help. It says the email was sent but it not being received.You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94460) -
HT5312 But my rescue email address has been hackerd ?
If i my rescue email has been hackerd what can i do to answer my security questions?
You need to contact Apple. Click here, phone them, and ask for the Account Security team.
(86977) -
HT5312 i havent rescue email for secuirty question
i want add rescue email address to my apple id for rest secuirty question i forget them pleas help me
You will have to contact Apple support:
https://www.apple.com/support/contact/ -
Mail doesn't show attachments or shows multiple time of the same attachment
Dear All,
In our organisation we use Exchange 2007 with Roll-up 3-v2 and we have many members who use Mac Snow Leopard and Lion standart mail program.
When we send out emails with attachnemt those thins happen:
Items with several attachments appear to have the same attachment added several times, or to have only one attachment,no matter how many there actually are.
Attached images become embedded.
We checked the mails with a barrowed Mac (yeah yeah we are PC users)
The problem occur regardless of thedownload protocol used – POP3 or IMAP4
The same e-mail item viewed through the ISP’s web interface appears as expected – all attachments visible and thesignature graphic visible and accessible
Other non-default mail client such as Thinderbird works fine.
The same e-mail item sent from other ISPsappear as expected, with all attachments visible and accessible.
We dig out for information and and I found this https://discussions.apple.com/message/12897672?messageID=12897672
related with Snow Leopard. Many of Mac user has upgraded to Lion but the problem is still there.
We are currently testin Roll-up 4 for the Excange server but as it has been withdrown from WSUS we are very suspicious that will solve the issue.
We are despereate to find a solution in order to provide better service to our Mac user member and we need help.
Unfortunately switching the systems that we use is not an option for the moment.
Any thougt, any help highly appreciated.
Regards,
Selcuk Savas
RCPA Webmaster
[email protected]Dear All,
In our organisation we use Exchange 2007 with Roll-up 3-v2 and we have many members who use Mac Snow Leopard and Lion standart mail program.
When we send out emails with attachnemt those thins happen:
Items with several attachments appear to have the same attachment added several times, or to have only one attachment,no matter how many there actually are.
Attached images become embedded.
We checked the mails with a barrowed Mac (yeah yeah we are PC users)
The problem occur regardless of thedownload protocol used – POP3 or IMAP4
The same e-mail item viewed through the ISP’s web interface appears as expected – all attachments visible and thesignature graphic visible and accessible
Other non-default mail client such as Thinderbird works fine.
The same e-mail item sent from other ISPsappear as expected, with all attachments visible and accessible.
We dig out for information and and I found this https://discussions.apple.com/message/12897672?messageID=12897672
related with Snow Leopard. Many of Mac user has upgraded to Lion but the problem is still there.
We are currently testin Roll-up 4 for the Excange server but as it has been withdrown from WSUS we are very suspicious that will solve the issue.
We are despereate to find a solution in order to provide better service to our Mac user member and we need help.
Unfortunately switching the systems that we use is not an option for the moment.
Any thougt, any help highly appreciated.
Regards,
Selcuk Savas
RCPA Webmaster
[email protected] -
I have placed my iTunes library in /Users/Shared/iTunes along with iTunes Music Library.XML
When I open iTunes, all the music is displayed correctly with playcounts etc...
The problem is, when a playcount or album info is updated it does not carry over to the other user on the same computer. The same with adding new files to the iTunes library...
How can I get iTunes to auto-update between users?
ThanksTempeleton Peck
I understand how to do that, I was looking to share all fodlers or a bunch of folders. I found out how to do it.
Paul -
Why am I getting different values based on order of input when the task type remains the same?
I'm having a hard time understanding the results I'm getting when I input task information. Here are the scenarios with different, unlinked fixed work tasks:
I estimate a task will take 2 hrs to complete and put this into work. If I add 1 resource, work = 2 hrs, duration = 1 day?, Resource A = 25%
On the same task, if I add Resource B (along with keeping A), duration = 0.2 days, Resource A remains 25% and Resource B = 100% (no % shown)
If I try the same scenario (adding first resource, then adding a second) on another task, occasionally it will give a duration of 0.91 days??? What the hell is that about?
If I add 2 hrs for work then add both Resource A and Resource B at the same time I get duration = 0.5 days, Resource A = 25% and Resource B = 100%. Why is it giving a duration of 0.5 days and why does it not adjust the unit % for Resource B?
This one is really blowing my mind. If I don't add work but instead add both resources at the same time first it's either making work 8.2 hrs OR 16 hours! I've gotten this result on the same exact task doing the same exact input. How can this differ?!
No work input, both resources added initially and IF I get the correct 16 hours with 1 day duration, then I go ahead and change work to 2 hours, which produce Resource A & B = 100% and duration = 0.13 days.
This last scenario is the duration result I want to see so the resources can work on multiple tasks in 1 day, but I typically try to input the work or duration estimates into the schedule and then resources last. I also don't understand how there can be
such a wide range of results based on such similar scenarios. Also, having to do it this way creates another step since I have to go back and change the work...although I guess I would be doing that if I input estimates first.
Can anyone explain why I'm getting those very head scratching differences, as well as provide some insight into how you initially develop a schedule (order of inputs)? I'm wondering if this has something to do with the change in 2010 regarding resources
that I still don't understand?Thank you Julie for the quick reply. As indicated in the first part of my question all these scenarios are dealing with Fixed Work, so yes by default they are effort driven. I should have clarified on the 1st scenario the question mark was just to show duration
had not changed, I wasn't actually questioning why it hadn't changed. Scenario 1 worked as expected. Although I don't fully agree with it, Scenario 2 also worked as expected.
Scenario 3: Yes it is effort driven (fixed work). Resources are just test/fake resources so all information, including calendars, is default. This is one of those cases where I can produce that unusual result only on occasion, not everytime.
4. In my scenario it's fixed work, but I do get the same result as you with fixed unit. Question still remains in both cases of why is the duration 0.5 days on 2 hours total work? Also, why are both units 25% in fixed units, but in fixed work Resource A
is 25% and Resource B is 100% when in both cases they are working 1 hour? Lastly, if Units is going to be changed in this case then why isn't it 13% (1/8 hours)?
5. This is also fixed work and I'm not touching duration in any of the scenarios. Day is still default at 8 hours. I was assigning resources via Resource Names on the Gantt View. I'm thinking this had to be some sort of glitch because I can't consistently
produce the 8.2 hours result, but it happened multiple times.
I also follow the same steps you do, other than I guess the last one. When you say you enter work estimates while assigning does that mean you do that in the split pane/task details form? I've typically done it from the Gantt View, but that seems to be what's
causing my issue because when I tried doing it from task details it is giving me the duration I want. So thank you for that. I still don't understand why there is such a wide range of results, but at least it makes more sense to me that 100% Unit working on
a task duration of 0.13 days is 1 hour.
I apologize for how long this, but I'm trying to get out of some bad habits I've picked up by being forced to develop dumbed down schedules for the past few years. -
I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks
If you don't have a rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
HT5312 Can I use the same rescue email for multiple accounts?
I have multiple accounts and would like to use the same rescue email address. I've already verified the first account, but when I try to add another account a message says it's already verified for another Apple id.
I haven't tried it, but the message that you are getting implies that you can't. The rescue email address that I have on one account is the same as the primary email address that I have on another account - that's an alternative.
-
The email that my security answers are sending to isn't the same as the email I have verified. What do I do. it won't let me change it etiher.
You won't be able to change your rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset follow the instructions on the HT5312 page you posted from for how to change it -
I want to buy music but it asked me for my security questions answers and I do not remember them. I want to send an email to my rescue email but i don't know how.
http://support.apple.com/kb/HT5312
If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466, and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
HTH
Maybe you are looking for
-
Open data information required?
Hi I want to delete the csv file from the application server once the full data set is read. i am sucessful to read the data set,but while usiong the delete datset,its deleting it,but as next time i am not abale to read any data,but file exits on app
-
I've printed a booklet before but each pdf page had two powerpoint slides on each pdf file. This binder has one powerpoint slide on each pdf page and if I try to print it as a binder, each pdf page takes up the whole half-page on the booklet. I wan
-
How to downgrade from beta 8 to 1.1.4??
Hi! I have a paid iPhone Developer account with beta 8 of the firmware installed. Now that I'm selling my iPhone, I need to downgrade it to 1.1.4. The problem is that I'm unable to restore 1.1.4 through iTunes 7.7. I get a error code of 20?? I also t
-
Where are these unix executable files coming from and how do I recover the original text file?
where are these unix executable files coming from and how do I recover the original text file?
-
Re: Log NC Button inactive
Hello Experts, At the time of logging a primary NC, I see that the "Log NC" button is not active. The help suggests to click on this after selecting primary NC Group and the NC code: Is it by design or I am missing some thing here? Would appreciate a