HT5362 How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?

How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?
Sometimes, when I am about to click something in the upper right corner, the banners stand in the way. It is very annoying.
However, I still need them and it is not an option to completely turn off notifications.
Has anybody faced the same problem?

Yeah, i've been playing around a bit with Notifications, and not being able to move there location is very annoying. The default location  normally means it is covering one or more tabs in Safari (or any tabbed application for that matter). Might have to try Growl again.

Similar Messages

  • How to move the screen (image) when using a tool?

    I know there is a shortcut and I forgot it, I am using the magnetic lasso tool and going through a detailed selection when I need to move the screen image because it is a lot bigger than what I can see. I know there is some keys to press for the hand tool to appear,,,anyone know what they are??
    THanks!!

    Thank you. I knew it was a defect in my head.
    Thanks!

  • TS3274 This is about screen orientation.  The screen switches from vertical to horizontal by itself and no matter how I move the screen it doesn't work correctly.  Very frustrating and don't know what to do.

    J

    Pick it up from the table, or bed, or other horizontal surface, where sensor will not read directions.

  • How to ''move'' the pictures in mac os x

    I had windows before and when u open a picture in windows, u just press arrow key (right) and it moves to next picture. How can I do this in mac?
    If i open the folder and view them in ''cover flow'' ( i think thats it) the pictures arent really big but in other way u cannot just move to next picture in full size without opening it in preview and close it again.
    takes a lot of time...
    any solution?
    i've got leopard.

    You have to select the ones you want to view before opening one to view it. You can either just drag a selection or if you want to select all in a folder use cmd+a to select all then just tap on one and the viwer pops up but you have the other pictures loaded so you can skip next. It is annoying because i too got use to the way the windows viewer did it straight away.
    As said above iphoto is the best way to go

  • How to move the data of a table from sqlplus to XML file

    Hi,
    Could you pls guide me how to move the data of a table from sqlplus to XML file.
    i want to do it from sqlplus rather than toad.pls help
    Thanks

    Oh..I'm in 9i.
    Try this out..and let me know.
    DECLARE
    CTX DBMS_XMLGEN.CTXHANDLE ;
    XML CLOB ;
    F UTL_FILE.FILE_TYPE;
    XMLC VARCHAR2(32767);
    BEGIN
    CTX := DBMS_XMLGEN.NEWCONTEXT('SELECT * FROM department1 ') ;
    XML := DBMS_XMLGEN.GETXML(CTX) ;
    XMLC:=TO_CHAR(XML);
    SHOW_ENVELOPE(XMLC);
    F := UTL_FILE.FOPEN('ATTACH_FILES','DEPT.XML', 'W');
    UTL_FILE.PUT_LINE(F,XML);
    UTL_FILE.FCLOSE(F);
    END ;
    Good luck!!!
    Bhagat
    null                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to move the value from a character field to numeric or packed decimal

    Hi,
    can anyone explain me on how to move the value from a character field to numeric or packed decimal.
    Please help me on this. Thanks...
    Regards,
    Rose.

    Hi ,
    if you use keyword MOVE u may loose the decimal and thoussan separator and if u don't want to loose them just call the FM ..HRCM_STRING_AMOUNT_CONVERT.
    i doubt wherther it is HRCM or HCRM just try using *
    this will suit ur requirement.
    Regards,
    KK

  • I have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY

    i have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • How to move the process chain from Unassigned node to a new node in 3.5?

    Hi all,
    I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
    Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
    Thanks
    Poooja

    Hello,
    Try this....
    Double click on your process chain. Via the menu select:
    Process chain > Attributes > Display components
    Select F4 (possible entries)
    At the bottom of the window you will find a create icon
    to make your own component.
    After you created it, assign it to your process chain.
    Don't forget to save the process chain.
    Regards,
    Sivaram

  • How to move the objects from Infoarea to another?

    Hi,
    How to move the objects from Infoarea to another?
    Thanx in advance,
    Ravi.

    Hi ..
    If the drag & drop functionality is enabled you can drag the catalog and drop it in another InfoArea just as you do with files on your PC.
    The other procedure is Use the right mouse button to create an InfoObject catalog in the InfoArea. If you want to make a copy of an existing InfoObject catalog, specify a reference InfoObject catalog.
    and check this  thread
    Re: Info Object Mapping to Info Area

  • One computer with 2 accounts-how to move an iPad from one to the other.

    imac with 2 accounts-how to move an ipad from one account to the other account

    Yes it is possible using PAPI. I have just used PAPI to create instances . I have not tried the requirement which you want. But as per my knowledge it can be done.
    Good Luck
    Right Chord

  • OpenScript: 1.     How to move the scripts from one location to another location. in OpenScript; Copy, paste or Import, export

    How to move the scripts from one location to another location. Copy, paste or Import, export

    Both way you can do.. Difference is - if you copy paste to another folder script dependencies will not move with the same( ie Assets added), whereas if you export and import the script all dependencies will be correlated automatically

  • HT4527 How can move the apps and playlists on my iPad to my Mac? Whenever I attempt to sync, I get a message stating that all apps and music on my iPad will be replaced by content from my Mac and there are no content. Thanks.

    How can move the apps and playlists on my iPad to my Mac? Whenever I attempt to sync, I get a message stating that all apps and music on my iPad will be replaced by content from my Mac and there are no content. Thanks.

    the apps will not be deleted if the itunes is authorised for the apple id from which you downloaded the apps.
    for the songs if you have downloaded it from a store other than itunes an app "TuneAid" will help you. download the full version then you can copy all the songs on the ipad to ur itunes library

  • Just brought a new Mac Book Pro and wondered how to move my apps from the iPad to this?

    Just brought a new Mac Book Pro and wondered how to move my apps from the iPad to this?

    iPad apps will not run on a Mac.
    iPads use the iOS operating system. Macs use the OS X operating system. Apps for one won't run on the other.
    The most that you can do is store the content on your iPad in the content libraries of iTunes for Mac. You can play the music, movies, TV shows, and podcasts from the iPad using iTunes on the Mac. As well as, read iBooks from the iPad in iBooks for Mac.
    http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf

  • How 2 move the message from memory card 2 phone me...

    did anyone know in nokia N73 how 2
    move the message from memory card move
    to phone memory???? did anyone know
    how 2 move it??? teach me plz.....

    Here is an easy way to move your messages from Phone Memory to Memory Card or from Memory Card to Phone memory In Nokia models.
    1- Install latest version of Nokia PC Suite and connect your set.
    2- Open Nokia Communication Centre. (Select Phone Memory or Memory Card from which you want to move messages to other memory)
    3- Select all messages in a single folder (Inbox/Sent Items or from My Folders) and click on file> export. This will create *.csv file.
    4- Download NBU Explorer 1.8 from http://www.soft82.com/download/windows/nokia-nbuex​plorer/  (You must have installed Windows Installer 3.1 and Microsoft .Net Framework 3.5 to run NBU Explorer. You can easily download these from Microsoft Site,)
    5- Open *.csv file in NBU Explorer and click File > Export All. (Your all messages will be exported as *.vmg files.)
    6- Disconnect and connect your phone again in Nokia PC Suite.
    7- Now set your target memory in your phone for messages.
    8- Open Communication Centre and Select your desired folder then click on file > Import messages by selecting multiple messages *.vmg files. (You don’t have to import messages one by one but you can import all messages in a single folder at once)
    9- And you have done it.
    10- You can import *.csv list in Nokia PC Suite rather *.vmg files, but in this case, all the spaces (blank spaces) in your messages will be lost. All the text of your messages will be merged to a single line. So exporting via NBU Explorer is recommended.  
    11- Any query?  Contact me at ********@yahoo.com.
    MODERATOR'S NOTE:
    E-mail address has been removed from this post as it is unwise to post such personal information in a public web forum. This is for your personal safety and privacy.
    Edited by: Aikin19

  • How to move the arrows in navigation view?

    Hi, when i am using the navigation to define my page flow, i could move the page in the navigation with "SHIFT+MOUSE",but the arrow from one page to another can't be moved if i don't change position of the two pages, and when there are many pages, the arrows cross with each other, and it becomes hard for me to see them clearly. so how to move the arrows to organize them in a clearer view(Just like that in BEA Weblogic Workshop with JPF design)? is it something needes improving in Creator EA, or i just didn't find the way to do this?please help.

    Hi,
    We thank you for your valuable feedback. An RFE has been filed on your behalf for the same.
    Cheers
    Giri

Maybe you are looking for

  • Songs are on iPod but will not show! Help me before I lose it!

    I had plugged my iPod in like I ALWAYS do and I was puting some lyrics on my songs when all of a sudden my computer beeped. It said my iPod was not connected and then my iPod reconnected. However when it did it started to ask me to sync it to my comp

  • Creation of material Documents for RMPM adjustments using BAPI

    Hi can any one help me Creation of material Documents for RMPM adjustments using BAPI... i should be grateful to you... advance thank you with regards venkat

  • Brand New Viewsonic VX2035WM and issues with MDD G4 (2003)

    Hello, fine folks, Well, I've been waiting to upgrade my 17" CRT monitor to a nice, big LCD. I finally got my chance last night. I bought a Viewsonic VX2035WM 20" widescreen monitor. I didn't get to set it up until today, however. I set up the monito

  • Which of these Macs would be a better machine?

    I am at the crossroads of getting a new Mac and I have two choices. Pretending everything else between the macs is equal besides what I am about to describe, which of these would be better? Choice 1. 15" Macbook Pro w/ 2.16 Core 2 Duo processor and 2

  • Unable to start vnc server

    Hi, We are using RHEL 5.4. Starting vnc server is giving below error. service vncserver start Starting VNC server: 1:root sh: line 7: 4156 Segmentation fault Xvnc :1 -desktop 'vhut.wgt.com:1 (root)' -httpd /usr/share/vnc/classes -auth /root/.Xauthori