HT5429 Is there a way to turn off the turn-by-turn navigation voice from the map app itself without ending the directions?

I know that it is possible to turn off the voice for turn-by-turn directions completely (in the settings menu), but is there a way to temporarily silence the voice from the maps app itself? For example, if I am driving to the freeway from my house I know how to get there and do not want my phone talking to me, but I would like to keep the directions active and turn on the voice once I need it later in the directions. Is there an easy way to do this without going to the settings app each time?

I don't think there's any way to do it, but I'd like that feature as well: on long trips I listen to an audiobook and when I'm travelling routes that I already know well, I mostly want to use navigation to route around any traffic that might occur.
In both cases, the voice directions aren't welcome, and I can get by with the on-screen display… and in other GPS navigation software or hardware I've had, muting the voice was an easily accessed option. (Garmin USA on the iPhone, for example, has a 'mute' icon available right on the maps display).
I've requested that feature at http://www.apple.com/feedback/iphone.html - you may wish to do the same.

Similar Messages

My phone was stolen and my find my iphone was turned off is there any way to turn it on from another device?

So my iphone was stolen after I left it in a mall. I had find my iphone app off is there any way to turn it on from another device so I can see the location of my phone?

There is no way to remotely enable that feature. It has to already be turne don in Settings > iCloud > Find My iPhone in order for you to locate it.
Here is some more info about Find My iPhone.

Is there a way to shut off the cellular radio ?

Is there a way to shut off the cellular radio ?
I can go to “settings” and switch off cellular data. However I still see the signal strength meter and my iPhone will ring if called.
I thought there was a way to shut off the cellular radio in an iPhone and keep the Wi-Fi turned on.

When you turn Airplane mode on, it does turn all the radios off. You can, however, turn the WiFi and bluetooth back on.
Enjoy.

When I am talking on the phone, is there a way to shut off the screen so my face does not press buttons? I am using an Iphone 4.

When I am talking on the phone, is there a way to shut down the screen so that my face does not touch the buttons?

It is supposed to shut off on its own. Some users have reported cases or screen covers that have interfered with the proper functioning of the proximity sensor. If you've removed those and cleaned the screen and still have the same problem you may have a defective proximity sensor. You may find more information by doing an internet search for "iphone proximity sensor."

Is there a way to turn your voice mail off

On the i phone 5 c is it possible to turn voice mail off ? I do not want voice mail.

strawnw88,
Thanks for your question! I have some good news for you. Voicemail on the iPhone 5c is optional. You can choose not to set it up if you don't have a use for it. If you've already set it up on your end, then we may need to disable from the network side.
Let us know if you need further assistance with this!
TrevorC_VZW
Follow us on Twitter @VZWSupport

Is there a way to shut off the screen of an imac, while leaving a power point running?

I have a slide show set to run on a connected monitor, but don't want to leave the screen of the mac on while it is running. I've tried **** control eject with no luck. On my pc I was able to just turn the screen off and it would still show, but there is no button like that on the imac since it is all in one. is there a way around this?

You cant switch off the power to the monitor but you can send it to sleep.
1 - Apple > System preferences > energy saver: set the monitor to sleep at the shortest duration
2 - While the second display is connected and powered on, System Preferences > Displays > Arrangement: deselect the Mirror Displays option
While the presentation plays on the secondary display, the Mac display will go to sleep as there is nothing on the screen during play, entering display sleep within seconds.

Is there a way to shut off the "Show All" in a panelCollection?

JDev 11.1.1.4.0
Hi, I am looking for a way to turn off the "Show All" option in the View/Columns menu. Even though you can hide columns from this menu using featuresOff="columnsMenuItem:col1,col20" if a user selects the "Show All" option, it will show the columns you're trying to hide from their their view (programatically controlled). I don't want to remove the whole View menu, because it has options I need to give the user. I've read the Oracle doc on af:panelCollection, but it does not reference the "Show All" in the featuresOff section.
Thanks,
Troy

Hi,
no there is no option. However, I see this as a bug - not a feature - and filed it
Frank

Is there a way to shut off the start-up sound?

how do I turn off the start-up sound that plays when I turn on my macbook?

Try downloading Psst from www.macupdate.com. There is also another, called something like startupchime.prefpane or something like that. Look around macupdate using words like chime and startup chime, and you'll find a way.

Is there a way to turn on icloud without being near the device

My ipod was recently stolen. I don't have icloud turned on so I have no way to trace it. Is there a way I can trace it without turning it on or is there a way to turn icloud on from a computer?

You would have needed to enable 'Find My iPod' on your iPod Touch before it was lost in order to be able to locate it. Failing that, you cannot do so. (It would also have to be on, not wiped, and able to connect to a network - any competent thief will have wiped it.)

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

Is there a way to turn off all push notifications off at once on iOS7

Is there a way to turn off all push notifications off at once on iOS7 (iPhone5s). Used to be able to on iOS6. Handy features for soccer fans and such who PVR games but have lots of apps that push the score

N
O.

When sharing screen from work with my home computer, is there any way to turn off the display at home?

Hi, sorry if this is a silly question, but when I'm viewing my desktop on the home computer from work (as in I've connected by finding my computer in the finder and hit the "Share Screen" button - is there any way to turn off the display at home? It seems a bit of a waste of power to have the screen on when I'm not actually there - I just need to be able to see all my programs etc on the remote screen in order to use them. My home computer is a 2011 iMac running latest Mountain Lion, work is a 2010 MacBook Pro.
Thanks in advance!
Matt

I've set up another user on my home Mac and left that one logged in. Now when I connect from work it asks me if I want to share the screen or log on virtually as my user. I think choosing the second option doesn't power up the screen.
Matt

Is there any way to turn off the auto formatting in Pages? I just want to type a letter and add pictures and titles, and Pages keeps changing font sizes and doesn't let me "Do it my way". I HATE this!

Is there any way to turn off the auto formatting in Pages? I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to. But NO! Pages keeps changing the font size! I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size! I am getting SO FRUSTRATED! I've spent over an hour trying to get the stupid program to let me just type my letter! Can anyone help?

The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
You're welcome Rich. Glad to help.
Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
Mahalo for the and Aloha from Big Island.

Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. Is there any way to turn this off ?

== Issue
==
I have another kind of problem with Firefox
== Description
==
Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. This is very very very annoying & I see no options in the settings to turn this off. Is there any way to turn this off ? Even if I just press the X button to close Firefox then later in the day I open Firefox the previous pages always open & it is annoying. I apologize for the language but that is just how ''irritated'' & annoyed I am about this
<blockquote>language cleaned up by a moderator - eh</blockquote>
== This happened
==
Every time Firefox opened
== It started randomly
==
== Troubleshooting information
==
There was nothing in the Troubleshooting about this
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-Default Plug-in
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 10.1 r53
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.50106.0
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Hello David.
Go into ''Tools > Options > General > Startup:When Firefox starts:'' and configure it as you want (probably to show your home page?). This is the very first option that appears in the options screen, but I understand that it may not be very easy to find. Firefox 4 will not include any redesign to the options screen (except possibly it appearing in a tab, rather than in a popup), but you may interested to know that there are plans to redesign the options screen for versions after Firefox 4, to make it easier to use. If you want to know more about the redesign, just ask.
Anyway, if that doesn't help (it probably does, but just in case), it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.

Is there a way to turn off using ram as intermediary when transfering files between 2 internal hdds? (write cache is off on all drives)

right forum? first time here. none of the options seem perfect. so i guess this applies to 'setup.' i tried to describe what's happening verbosely from the start of a file transfer to completion of writing file to 2nd hard drive.
win 7 64bit home - i2600k 3.4ghz - 8gb of ram - 2hdd 1 ssd
I have this problem when transferring files between 2 internal hard drives. one is unhealthy (slow write speeds but not looking for advice to replace it because it serves its unimportant purpose). so, the unhealthy drive drops into PIO mode - that's acceptable.
however, a little over 1gb of any file transfer is cached in RAM during the file transfer. after the file transfer window closes, indicating the transfer is "complete" (HA!), it still has 1gb to write from RAM which takes about 30minutes. This would
not be a problem if it did not also earmark an additional 5gb of ram (never in use), leaving 1gb or less 'free' for programs. this needlessly causes my pc to be sluggish - moreso than a typical file transfer file between 2 healthy drives. i have windows write
caching turned off on all drives. so this is a different setting i can't figure out nor find after 2 hours of google searches.
info from taskmanager and resource monitor.
idle estimates: total 8175, cached 532, available 7218, free 6771 and the graph in taskman shows about 1gb memory in use.
at the start of a file transfer: 8175, 2661, 6070, 4511free and ~2gb of ram used in graph. No problems, yet.
however, as the transfer goes on, the free ram value drops to less than 1gb (1gb normal +1gb temporary transfer cache +5gb of unused earmarked space = ~7gb), cached value increases, but the amount of used ram remains relatively unchanged (2gb
during transfer and slowly drops to idle values as remaining bits are written to the 2nd hard drive). the free value is even slower to return to idle norms after the transfer completes writing data to 2nd hard drive from RAM. so, it's earmarking an addition
5gb of ram that are completely unused during this process. *****This is my problem*****
Is there any way to turn this function off or limit its maximum size. in addition to sluggishness, it poses risk to data integrity from system errors/power loss, and it's difficult to discern the actual time of transfer completion, which makes it difficult
to know when it's safe to shutdown my pc (any data left in ram is lost, and the file transfer is ruined - as of now i have to use resmon and look through what's writing to disk2 -> sometimes easy to forget about it when the transfer window closed 20-30minutes
ago and the file is still in the process of writing to the 2nd disk).
Any solution would be nice, and a little extra info like whether it can be applied to only 1 hard drive would be excellent.

Thanks for the reply.
(Although i have an undergrad degeee in computers, it's been 15years and my vocab is terrible. so, i will try my best. keep an open mind. it's not my occupation, so i rarely have to communicate ideas regarding PCs)
It operates the same way regardless of the write-cache option being enabled. It's not using the 5gb for read/write buffer - it's merely bloating standby memory during the transfer process at a rate similar to the write speed of destination (for my situation).
at this point i don't expect a solution. i've tried to look through lists of known memory leaks but i dont have the vocabulary to be 100% certain this problem is not documented. as of now it can't affect many people - NAS's with low bandwidth networks, usb
attached storage etc. do bugs get forwarded from these forums? below i can outline the consistent and repeatable nature not only on my pc but on others' pcs as well (2012 forum post i found).
I've been testing and paying a little more attention and i can describe it better:
Just the Facts
Resmon Memory Info: "In Use" stays consistent ~1gb (idle amount and roughly the same when nothing else is running during file transfer)
"Modified" contains file transfer
data (meta data?) which remains consistent at little over 1gb (minor fluctuations due to working as a buffer). After the file transfer window closes "Modified" slowly diminishes as it finishes lazy writing (i believe that's the term). I forget idle
pc amount, but after transfer this is ony 58mb)
"Standby" as the transfer starts it immediately rises to ~2gb. I'm sure this initial jump is normal. However, it will bloat well over 5gb over time with a large enough transfer increasing at a consistent rate during the entire transfer
process. the crux of the matter.
"Free" will drop as far as 35-50megabytes over time.
as the transfer starts, the "Standby" increases by an immediate chunk then at a slow rate throughout entire transfer process(~1mb/s). once writing metadata to RAM no longer occurs, the "Modified" ram slowly (@500kb/s matching resmon disk
activity for that file write) diminishes as it finishes lazy writing, After file is 100% written to destination drive, "Standby" remains a bloated figure long after.
a 1.4gb transfer filled 3677MB of "Standby" by the time writing finished and modified ram cleared. after 20minutes, it's still bloated at 3696MB. after 30-40mins it's down to 2300mb - this is about what it jumps immediately to when transfer starts
- it now remains at this level until i reboot.
I notice the "standby" is available to programs. but they do not operate well. e.g. a 480p trailer on IMDB.com will stop-and-go every 2-3seconds (stream buffers fine/fast) - this would be during the worst case scenario of 35-50mb "Free"
ram. my pc isn't and never was the latest and greatest, but choppy video never happens even with 1 or 2 resource hogs running (video processing/encoding, games, etc).
Conjecture Below
i think it's a problem when one device is significantly slower at writing than the source device - this is the factor that i share with others having this problem. when data is written to modified ram then sent to destination, standby memory is expanded
until it completely or nearly fills all available RAM - If the transfer size is large enough relative to how slow the write speed of destination device is. otherwise it fills it up as much as the file size/write speed issue allows. the term "memory leak"
is used below but may not technically be one, but it's an apt description in layman's terms.
i saw a similar post in these forums (link at end). My problem is repeatable and consistent with others' reports. I wasn't sure if i should revive it with a reply. some of these online message boards (maybe not this one) are extremely picky
and sensitive, lol.the world will end if an old thread revives - even if for a good reason.
i can answer some of the ancillary issues. one person (Friday, September 21, 2012 8:33 PM) mentions not being able to shutdown, i asume he means stuck on the shutdown screen - this is because lazy writing has not completed - his nas write speed is significantly
slower than reading from source - the last bits of data left in ram still needs to be writen to the destination. shutdown will stall for as long as needed until the data finishes writing to destination to prevent data loss.
another person (Monday, September 24, 2012 6:31 PM) mentions the rate of the leak, but the rate is more likely a function of read speed from source relative to write speed of destination. which explains why my standby expands closer to a 1:1 ratio compared
to his 1:100 (he said 10mb per 1000mb)
we all have the same exact results/behaviour, but slightly different rates of bloating/leaking. as the file is written from from the ram to the destination, standby increases during this time - not a problem if read and write speeds are roughly equal (unless
your transfering a terabytes then i bet the problem could rear its head). when writing lags, it gives the opportunity for standby ram to bloat with no maximum except the amount of installed ram. slower the write speed, the worse the problem.
The reply on Wednesday, September 26, 2012 3:04 AM has before and after pictures of exactly what i described in
"Just the Facts". Specifically the resmon image showing the Memory Tab.
The kb2647452 hotfix seems to do some weird things relative to this problem. in the posts that mention they've applied it: after file completes it looks like the "standby" bloat is now "in use" bloat. as per info from Tuesday, October
09, 2012 10:36 PM - bobmtl in an earlier post applies the patch. compare images from earlier posts to his post on this date. seems like a worse problem. Also, his process list indicates it's very unlikely they add up to ~4gb as listed in the color coded bar.
wheres the extra gb's coming from? likely the same culprit of what filled up "standby" memory for me and others. it looks like this patch relative to this problem merely recategorizes the bloat - just changes the title it falls under.
Link:
https://social.technet.microsoft.com/Forums/windows/en-US/955b600f-976d-4c09-86dc-2ff19e726baf/memory-leak-in-windows-7-64bit-when-writing-to-a-network-shared-disk?forum=w7itpronetworking

HT5429 Is there a way to turn off the turn-by-turn navigation voice from the map app itself without ending the directions?

Similar Messages

Maybe you are looking for