HT5439 Has anyone had the Network time and date error with Apple TV when traveling?

Has anyone had the Network time and date error with Apple TV when traveling?

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Similar Messages

  • My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

    My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    To help avoid future transgressions set the Restrictions for In-App Purchases...
    Settings > General > Restrictions
    Understanding Restrictions  >  http://support.apple.com/kb/HT4213

  • Camera on iPhone4 doesn't work, when you use either the icon on the screen all you get the the shutter. I am unable take pictures. Has anyone had the same problem and are there any solutions?

    The camera on my iPhone 4 isn't working and hasn't for quite sometime. I have updated the phone to IOS 6 and it hasn't made any difference.
    When you use the icon that appears at the bottom of the screen or the camera icon on the main screen all you see is the camera shutter.I have tried to restore the camera and that hasn't made any difference. I have spoken to Apple support and they sent me a support site to check out, but there isn't any specific solution for my problem. Has anyone had a similar problem and is there a solution?

    Try:
    - Reset the iPhone. Nothing will be lost
    Reset iPhone: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPhone.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My iphone 3gs has started showing the wrong time  and date. All was fine until this afternoon when it changed.  My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

    My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed...  to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time.  The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time.  The phone can not find my time zone any more.   The only fix I found was to turn off the automatic setting for time.  What is  happening? Ideas?

    just sorted mine went to
    settings-mail,contacts,calender-timezone support
    then turned it off then on tapped time zone and typed london
    this did sort mine

  • HT201365 I just I just updated to iOS 7 and now my calendars are not keeping the information on the days that should be marked.  The info is there in my iCloud on my computer, just not on the iPhone.  Has anyone had the same problem and what can I do abou

    I just update to iOS 7 on my iPhone 4s. The calendars on my iPhone are not keeping the information on the days that should be marked.  The info is there in my iCloud on my computer, just not on my phone.   Has anyone else had the same problem and what can I do about it?  Is it at bug in the iOS 7 update?

    What do you mean by "on the days that should be marked"?  Are you calendar events displayed on the wrong days?

  • I cannot get sound from apple TV. Has anyone had the same experience and what did they do?

    Hi, I recently bought Apple TV 2nd gen. I can, after a while, get access to my library but when I start to play movies I cannot get sound. Has anyone had a similar experience? If so what did you do to overcome the problem?

    Do the movies contain both stereo and 5.1 audio.
    Have you tried toggling the Dolby Digital setting or the Audio Output setting.

  • I have a copy of Adobe 8 pro move it from my old laptop to the new an it said an serial number invalid i talked with someone was refered to life chat, nothing they could do, now im here, i ont thing i should have to purchase new, has anyone had the same i

    have a copy of Adobe 8 pro move it from my old laptop to the new an it said an serial number invalid i talked with someone was refered to life chat, nothing they could do, now im here, i ont thing i should have to purchase new, has anyone had the same issues and how did you get it fixed or are you in the same boat.

    Hi Edward Guilliver,
    As i understand you are facing 'Serial Number Invalid' Issue, I would recommend you to refer these Links for more information:
    Link 1: https://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
    Link 2: Error "Invalid serial number" | Acrobat 9 | CS4
    Please let me know if any of this Link fix your issue.
    Regards,
    Rahul Tyagi

  • Unable to set network time and date

    My Applet TV2 is unable to set the network time and date making it so I cannot login to my itunes account so not Netflix or anything making it pointless. I have tried adjusting my router settings (although I've used the same router for over and year and this just started randomly) I have ensured Port's 123 are open, I've restored the ATV2 4 times and have reset my router. I've seen links showing how to use SSh to set the time but I'm unsure if that will work. Any help is appreciated as I'm at a loss at this point

    Welcome to the Apple Community.
    Of the things I've seen work for people in the community you seem to have done most of them, but did you try these.
    Restart Apple TV by removing ALL the cables for a moment or two.
    Ensure that the DNS address's used by the Apple TV and the router are the same and are the address recommended by your ISP.

  • My imac intel display is frozen.  Both the mouse and my network is working.  Has anyone had problems like this and were you successful at fixing it?

    My imac (Intel) display is frozen.  Both the mouse and the network are working.  I've shut down various times, pulled the cord from the receptacle on the power strip, and restarted several times.  No luck.  Has anyone had problems like this and were you successful at fixing it?  Thanks.  Would appreciate any help.  Paula

    Same problem, but a c.2009 iMac running OS X 10.9.1. Just happened overnight. Presently, I'm able to access my HD via wireless via laptop and copying all non-backed up files to an external drive. So far, Paula is the only other person I've found with this same problem and hers was three years ago! Going to keep searching for an answer.

  • Has anyone had the problem with their iPhone 5 where some people cannot receive texts from you?  And if so, is there a fix?

    Has anyone had the problem of not being able to send texts to certain people? 

    Here is another screenshot.  In this example, I did 'Get Info' on one of the goofy ones, and it shows that this Wolfmother song is sorted by the Eagles.  ***? 

  • HT4367 Anybody has a solution for network time and day set up for apple tv 3?I also have difficulty about my apple id and password with the apple tv. My password/apple id  works fine with my other gadgets. Thanks. Ugur Erkmen

    My problem started after the itunes update.i  reset the apple tv.Now I cannot sign to itunes and i cannot reset the network time and day.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • TS1368 has anyone had the error code 11556?

    has anyone had the error code 11556 when logging onto the itunes store from itunes?

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • Has anyone had the "equals" key in the numeric pad stop working since installing the Boot Camp 3.3 update

    Has anyone had the "equals" key in the numeric pad stop working since installing the Boot Camp 3.3 update?

    I have been an ardent user of aperture for years now and got used to the great workflow. Ever since version 1 I have been enjoying working with aperture. It is the workflow that kept me from changing.
    I got a new MacPro 12 GB ram, 4TB HDD my library mostly indexed files sits on a raided 2TB for maximum of comfort. I did this in an effort to keep me from writing the posts I writing lately. I do not have the time rally to do this but reality is something different.
    Today I am working on a job I need to finish quickly and in aperture workflow manner. So I switched to full screeeeeeeeeeeeeeeeen mode and after pressing 'H' for the HUD my screen started flickering. please look at the video I posted in my flickr account: http://www.flickr.com/photos/mawas/4719742585/
    Now this is the second time this happened in a short time after I got a new mac and upgraded to 10.6.4! After the screen had jammed up : http://gallery.me.com/masuwa/100103 I needed to hard boot my mac I am getting nervous!

  • Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

    Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

    Thanks for reminding to at least update the results thus far.
    Update 4:
    I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
    Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
    My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
    About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
    Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
    One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
    Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online)  and I suspect that is one of the main issues why it does not work correctly.
    So at this time, I have not found a working solution to this problem.

  • Has anyone had the wrong album atwork appearing?

    Has anyone had the wrong album atwork appearing?

    Here is another screenshot.  In this example, I did 'Get Info' on one of the goofy ones, and it shows that this Wolfmother song is sorted by the Eagles.  ***? 

Maybe you are looking for

  • Distiller Server "Could not open file" modal dialog

    We're running Distiller Server 8, and I've got a dilemma that I'm hoping is solvable. This is installed on a Windows 2008 server, with jobs coming into watched folders from our OPI server. Periodically, we get a dialog box that says Acrobat Distiller

  • Why is the text message telling me I have used all the data in my plan when I still appear to have 3gb left?

    I keep getting a message that I have "used 100% of the data in my prorated plan."  However, when I check I still have over 3 GB left in my regular plan, but the full promotional 1GB is used up.  I hope that the promotional data is not just a way to g

  • USB Storage Devices not showing up in My Computer

    I have had this issue for sometime now, and I have not been able to find my solution. Hopefully, someone may be able to assist. I have done most of what other forums have said, including formatting the Disk in Disk Manager (It gives me an error every

  • Updation of INPUT Request fields in PI sheet automatically from xMII system

    Hi, We are getting the consumption data(Material Weight and Batch) from xMII in SAP browser based PI sheet through Z function module as a parameters .These values needs to updated automatically in PPPI_INPUT-REQUEST fields (PPPI_MATERIAL_CONSUMED & P

  • Sizing in SAP PI

    Hi Friends, What are the parameters should I consider while doing Sizing in PI? I read some articles,but still confused,if anybody had done SIZING ,please share valuable inputs. Thanks and Regards, Raja Sekhar