HT5568 when i try to install the Safari 6.0.2 update i get the message an error has occured The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102) - can anyone help my get the update please
when I try to install this update I get the message an error has occured The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102) - can anyone help my get the update please?
There are problems with the servers. Download and install that update > http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg
Similar Messages
-
When trying to run a software update in 10.8.2 from the App Store I recieve the error - The operation couldn't be completed (NSURLErrorDomain error -1100.)
Any help would be appreciated.
Thanks
AnthonyI found the answer by looking over towards the right on this page...to the More Like This section.
The answer is that this indicates a server overload with Apple's App Store server. Give it some time and try again.
Here's the link where this was discussed:
https://discussions.apple.com/message/19553195#19553195 -
I have recently changed my apple id and password. When i try to access music that i bought on itunes on an external hard drive, it asks me to authorize my computer with my old apple id? can anyone help?
Please try to sign in at https://appleid.apple.com
Check if your new username/email address is verfied
If this works, delete your account on your iPhone (Settings > iCloud)
Sign back in -
The operation couldn't be completed (NSURLErrorDomain error -1012.)(-1012)
Good Morning,
I am running into an issue when trying to process an update in the appstore on my macbook pro. I get the following error after clicking on the "update" button:
the operation couldn't be completed (NSURLErrorDomain error -1012.)(-1012)
Any help would be greatly appreciated!James6 I love you, this problem has been annoying the **** out of me for months!
Thanks! Just turned off Kaspersky and low and behold a multitude of updates available!
Brilliant, good work fella -
Because of weak WiFi signal I need to use an external antenna (GSI USB wireless WIFI long range network adapter). My computer can see the signal clearly and shows that I am connected to the right network. But when I try to launch Firefox I get a message that "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." When I click "OK" Firefox tries to load websites but gives up and reports "Problem Loading". It looks like Firefox is having trouble "seeing" the signal from the external antenna. What do I need to do please?
Try Ubuntu support, I don't think your problem is with Firefox - it will use the connection that the Operating System "makes". I'm a real noob with Ubuntu myself, and don't think I can help you figure out the problem.
http://ubuntuforums.org/ -
Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…
Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?
It happened w/ my MacPro 2.66 GHz Dual-Core Intel Xeon about 5 months ago; tried everything I could think of including multiple downloads of Flash, and hadn't seen any solutions here. Adobe insisted many times that I download & update, but the newest vers. wouldn't work on the computer.
On checking Adobe/Flash was reading the computer as being an earlier model. So the new version of Flash wouldn't work w/ it. Snow Leopard 10.6.8 was being read correctly but not the computer model (can't remember what MP model it was reading).
Nothing worked. So -- a very old PC trick: If nothing else works get the hammer out and bludgeon it-- might work. So I reset everything by putting the Snow Leopard install disk in, held down 'C' on restart and let it run.
Didn't take anything off the HDD first, just ran the install disk over everything.
The experts on the forums are probably cringing right now & I'd like very much for them to jump in. Love to know how my computer model was being mis-read. All I can say is, for the brave and desparate, it worked for me. Something to keep in mind.
It helped that I had a new computer on order & have 2 backups, one being mandatory. Might work only the one time but worth a check.
Good luck on working this one out. -
I accidently deleted my url box at the top of safari. I believe I did this with the command key. Can anyone help me get it back? Thank you in advance!
Right click (cntl-click) on the top of the bar and select "customize toolbar". Drag the default set back in.
Regards,
Captfred -
I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?
Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash. -
Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run. can anyone help?
Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
OMG! I can't remember my security questions - answers. It won't let me schedule a call. And when I provided a rescue email address, it still made me answer the security questions I did not know! Can anyone help me get into Itunes so I can purchase music?
Using this link: http://support.apple.com/kb/HE57, click on:
Get Support
See All Products and Services
More Products and Services
Apple ID
Other Apple ID Topics
Use My Apple ID to Manage Security Questions
Then click on the box that says "Contact Apple Support"
This will give you a case number as well as the phone number to call when you are ready.
Cheers,
GB -
When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?
Macs have crazy headpne jacks in different models.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
Can anyone help me change the DOB on my sons profile for his apple I'd so I can setup family sharing? I originally put both ids in my name. He is 19 do it keeps saying needs my permission but no instructions in how to get that done? His phone was stollen once last month need to get this done ASAP to prevent future headaches. Ty
You can not change the date of birth on the account. Apple makes that clear up front when the account is created.
The only way to "fix" this is going to be for him to create a new account with the correct information. Any apps purchased with the old one will need to be re-purchased with the new account. They can not be transferred. -
I just bought my first MacBook Pro a few days ago. I can't seem to get my PC to see my MacBook Pro on the network. Can anyone help me get my PC to see my MacBook Pro on my network t?
Thanks,
AlexForgot Your Account Password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password. -
When creating a slideshow I get an error message when it's almost done: the operation couldn't be completed- osstatus error 9459. Help!
but I tried that earlier and the same thing happened.
Why not give us a list of all the things you've tried so we don;t waste your time - and ours - making suggestions that you know won't work?
Regards
TD
Maybe you are looking for
-
Uploading a Bank Statement by Interface Tables
Hi, I have an Electronic Bank Statement of MT-940 Formate. I referred an Article 563476.1 and made the Mapping . But how will i upload the Bank Statement. Regards, Mohsin
-
When opeing my email on my macbook pro some of my email messages show up in the middle of the screen..others show up all the way to the right. I want all of the emails to show in the middle of my screen. Is there a setting to change? Right now I have
-
Ipod Won't sync to Windows 8 PC
My PC with Windows 8 was crashing after syncing my Ipod Nano. I was not experiencing the problem when Syncing my IPAD nor my classic IPOD. I was getting a blue screen with a message WDF_Violation after sync my IPOD NANO. I followed a recommendation I
-
Hi Experts... I am Tech. person i dont know about following.. Is there any thing like we can set Vendor status into SAP... Like 'Black Listed' , 'ACTIVE' etc... if it is there ... then in which tables the status is stored
-
How can I fix my Firefox. It crashed after I was on a website.
I was on a website and when I went to check my mail it oopsed me. How do I fix this?