HT5594 why in spite of i turn off all of location servies when i turn on cellular data use data again ?
why in spite of i turn off all of location servies when i turn on cellular data use data again
in cellular >>system services >> mapping services
how can i turn off mapping services completly ??
& why now it use data until i turn it off ???
Settings>Cellular>Use Cellular Data for and turn Maps off. If you are not using Maps for navigation, it's not using data, though.
Similar Messages
-
I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network. How can i be sure that i am not being charged for roaming?
Make sure data roaming and cellular data is turned off. If you don't want to receive calls or SMS then put your phone in airplane mode and reactivate WiFi
-
Why does my iPad show no sim when turning on cellular data?
Why does my iPad show no sim when turning on cellular data?
Check the right and left sides of your iPad for a small hole the size of a paper clip (remove your smart cover if you have one). If you see this, then you have the wifi + cellular model. If you do, use a paper clip to remove the sim tray (or the sim removal tool that came with your iPad if you have it) as shown in the image below.
If the tray has a sim card in it, push the sim tray back in to re-seat it in the side of the iPad, then turn it on to see if the error message re-appears. If it re-appears, take it to a Verizon store and have them give you a new sim card.
If you have a sim tray but it is empty, you'll need to go to a Verizon store to get a sim card for it. -
I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.
Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling -
How do I get my iPhone to stop turning on cellular data for apps on its own?
I have tried resetting on the iphone and resetting all settings. Nothing seems to be working. So far the only improvement is that my iphone stopped turning on cellular data for other apps but now, interestingly, it's turning on cellular data for all apple designed apps,e.g. Pages, App Store, Itunes Store, Facetime, Contacts, Calendar, Mail etc. Everytime I try to turn them off, it doesn't work. Please Help!!
P.S. My phone is running ios7.Follow these directions, but pay attention to comment 1 regarding drafts. Best instructions I've seen on how to set gmail up as IMAP.
http://complexdiagrams.com/2009/01/19/imap-for-gmail-mailapp-iphone/ -
Why and how do I fix this? When I go into cellular data and view account it says my ipad is activated and ready to go. What gives???
It was working fine up until I upgraded the OS which I hadn't done in many versions so the ipad was not working as well as it should. Now it is searching for the network.
.Hello noodles074!
Let's get your device working again! It's possible that your device just needs to be reprovisioned on our network. Please go to Settings>General>Reset>Subscriber Services>Reprovision Account. This may take several minutes. After allowing about 5 minutes for completion, please power your iPad off and back on, and test it again. Let us know if this takes care of it!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
Do I have to turn on cellular data to make hands-free calls
Do I have to turn on cellular data to make hands-free calls on the iPhone 6? If so, REALLY, APPLE???? I have never had a smart phone and ALL of my low-tech phones allowed me to make hands-free calls and I did not have to use data (which is NOT free) to do it. I know that I can ask Siri to make calls for me but how do I make hands-free calls when my data is turned off?
Siri does indeed require internet access to function, so yes, you would need to have cellular data turned on
-
Is it possible to switch off all addons by default when starting firefox?
Firefox often runs quite slowly but resetting appears to solve the problem. I tried to identify any problmatic addon but was unsuccessful
'''''Is it possible to switch off all addons by default when starting firefox?'''''
Not really. You can start Firefox in the [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode?esab=a&s=Safe+Mode&r=1&as=s SafeMode], but you would need to restart Firefox to enable your addons. -
Hello,
I dropped my phone and ever since I got my screen fixed the right side of my touch about 1/4inch is unresponsive. I need to turn on my cellular data but I can't because of the touchscreen issue being unresponsive. Is there any other way to turn on the cellular data? What if I reset network settings will that turn on the Cellular Data and 3G? But if I do that will I loose my Wifi connect? Because if I loose Wifi I can't click Join after I enter my password due to the screen issue. I have an iPhone 4 and paid twice to get the screen replaced 2 times and problem persists. I cannot go to Apple because my warranty is over. Is there any other way I can turn the Cellular Data on?If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit -
What do you guys think?
Logically, because unlike you I do not keep my cellular data on at all times as I do not have an unlimited data plan. I only turn on cellular data when I am on the go and I do not have access to a wifi network. Therefore my need for a button in control center that turns on cellular data. And this would be very usefull to other iPhone users outside the US and Canada, where unlimited cellular data plans are not so affordable.
-
Is there a way to turn on cellular data remotely?
My iPhone was stolen, and I know I can't turn on location services remotely, but if I can turn on cellular data I might be able to do something.
Sorry, no.
-
A small portion (upper right hand corner) of my iPhone 4's touch screen is unresponsive. Now, I cannot change some of the settings since it won't respond. I am on an out of the country trip and I really need to turn on Cellular data.
Is there anyway I can change the phone settings from my macbook? Or maybe rotate the settings page so that it would show as landscape and I can turn on cellular data since the other areas of the touchscreen is working.
Thank you very much!Here's my suggestion:
On your iPhone, go to Settings > General > Cellular (where you would turn on cellular data if you could).
You can actually scroll that menu down a bit so the "Cellular Data" button is not necessarily in the far upper right corner of the screen. Hopefully you can scroll it down far enough that you can successfully set it. -
Is there a problem in turning the cellular data on and off to save battery?
is there any problem in turning on and off the cellular data frequently to save battery???
Hi Friend,
There is no problem. Even you turn data cellular off, you can keep turn on Wireless, so you can access internet, send/receive iMessages or anything else.
But, I have present my battery during 34 hours (charged until 83% on Saturday 22:30 and drained till 3% on Monday 08:00) ! Amazing ! And, I already posted this solution before: recharge the battery until reach 80 to 90%. IOS 6 User's Guide says make a full recharge just once a month. It takes few days to see the improvements. Restore your device will improve the results as well. All of this improves my battery fife over 15 hours, but my last battery life tes was 34 hous!
Hope it will be helpful -
Since upgrading can not turn on cellular data on iPad 3
I just upgraded my iPad 3 to the new iOS and cellular data is in off position. It will not let me move or set it to on. Has anyone had the same problem?
No, have you tried restarting or resetting your iDevice?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
It will just will jusdt make the chime and then shut down any awnsers?
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Maybe you are looking for
-
Basic Deployment problem, SQL Server 2000 and wanna create setup
I have just finished making a small app using Java and using JDBC driver to connect to an SQL Server 2000 that is installed on my PC. I now want to create a setup (using NSIS) of this app and distribute among friends. But my problem is that I have cr
-
Firefox does not appear even after turning off my firewall please help.
Explained before.
-
Edit Photo in Photoshop from Lightroom
Hello, I had a hardware problem and had to reinstall LR 3.6 and PS Creative Suite 4. I've used the programs for years now and never had this problem. When I'm in LR, I click on "Photo - Edit in Photoshop" and it should take me to Photoshop and open
-
SEEING DOUBLE HELP WORDS ON MY TASK BAR
Can anyone please help me with this problem I'm having that when I open up either Quicktime or iWeb, I see the word help twice at the top of my task bar. Shouldn't there only be one help instead of two. I haven't been drinking if that's what you are
-
JAXB - Elements declared as Complex Types becomming static inline classes
When a complex type is defined in the XSD as a complex type, compiling the scheme creates it as static class within the owning class. Is there anyway to change the behavior so that a regular class is created? Or do I need to change the schema to decl