HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

Similar Messages

HT5172 I have a new Mac pro.... when I plugged in PNY stick drive in the USB port a message came up that said that it was consuming two much power to remove the stick drive... what is this all about. ????

I have a new Mac pro.... when I plugged in PNY stick drive in the USB port a message came up that said that it was consuming two much power to remove the stick drive... what is this all about. ????

Try a SMC reset:
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself.

How do I remove the DVD.fpbf from my hard drive

I cant seem to remove the DVD.fpbf from my hard drive under favorites. I am not sure what to do?

Removing icons from Finder window sidebar after 10.6.7

I have a dvd stuck in the drive and as I can not boot is there a way of removing the dvd ?

Hi
I have a dvd stuck in the drive and as I can not boot is there a way of removing the dvd ?

Boot with the option key down. You will see a window showing all the bootable systems. Select the OSX boot and hit return. Once you are booted into OSX, use the Startup Disk system preferences to change your default boot volume.
Startup Manager: How to select a startup volume

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
I tried to reinstall driver.
I downloaded new codec
I tried Microsoft FIX IT
Nothing worked.
Need some help.
Thank you!!
Paul

Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
Hope this helps you.
Robert

What is the secret to removing the dvd drive?

I cannot remove the DVD drive.

Hi,
Please identify your notebook/pc with more than the series number.
Look at the base/rear/side of the notebook/pc at the barcoded sticker.
Post items numbered 1 and 2 on the following image. Your barcode may be slightly different but will still have the important imformation needed for us to help you.
###Do not post the serial number as it is personal information.###
Post the installed operating system version ( and whether it is 32 or 64-bit )
Not posting the information as requested will delay our responses and troubleshooting of the issue that led you to author a thread.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HT201456 After installing windows 7 with bootcamp, am I able to remove the flash drive?

After installing windows 7 with bootcamp, am I able to remove the flash drive?

Yes, if you have installed the driver package.

Dual Boot Systems via Removing the Optical Drive

Hi Apple,
Would like to enquire this thing if we can manage the boot up systems, so probable this is the setup. Since MBP has only have 1 Hard drive installed by MAC OS system and 1 Optical Drive. If we removed the optical drive and replace with another HDD. Our question is can MBP can select which drive will boot?
Original HDD --> wil boot as MAC OS (not shared with bootcamp)
Secondary HDD (from removing the optical drive) --> will boot Windows Platform 7 or 8.
The reason is that we don't want to share MAC system files to another OS systems files that's why we are planning to installed another HDD. The optical drive we really don't use, now adays all software is ELD downloadble over the web.
Thanks & Regards,
Jeffrey Quidasol

Yes, you can remove the DVD drive and replace it with another disk, or an SSD (OWC has some "Data Doubler" kits for replacing the DVD with another HDD or an SSD.
You can also partition your current HDD and put a bootable OS on each partition if you like. And you can do the same with an HDD or SSD in the DVD slot.
NOTE: I've used the OWC Data Double to replace the DVD in my iMac with an SSD, and it is currently booted from the SSD in the DVD slot (and running much faster with the SSD vs the slow HDD). So technically, it will work just as well for the Macbook Pro (and many people before you have done exactly that).

Dv7-4270us - How to remove the DVD/CD device

I have dv7-4270us. I need to reseed the BlueRay/DVD device. HP has this link to remove the device: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01277211
It is all wrong. Where do I find the correct instructions?
thanks
This question was solved.
View Solution.

Hi dhs13,
Take a look at the Maintenance and Service Guide for your model:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&lang=en&product=5048768&
I think the instructions for removing the optical drive are on page 58.
Rod
Although I am an HP Employee, I am speaking for myself and not for HP.

Can I use my time capsule with a bad hard drive as a wireless router if I remove the hard drive?

I have a 500 GB time capsule with a failed HD (i've repalced the whole machine with a new time capsule). I cannot get past the start up when I plug it in and the light glows a solid amber. If I remove the hard drive can I use it as just a wireless router to exted my network?

Yes, although the existing power supply might go bad before long.. you can run the TC as just an AEBS..
It is a fairly easy job to get the hd out.
http://www.ifixit.com/Device/Apple_Time_Capsule
Key to it is using hot air gun or even a hair dryer on really high temp lowest fan and spend enough time getting to glue to soften.

I have a 1st Gen Time Capsule 1tb. It turns on, boots up and turns green for 5-10 mins, but then turns solid orange and then blinks orange. I have removed the hard drive and replaced the power supply . . . still the same problem. Suggestions?

I purchased a used 1st Gen Time Capsule with a 1 tb hard drive.
When I plugged it in and did the initial setup, it worked fine, but gave me a hard drive error. A few minutes later the green light turned solid orange, then blinking orange, then the status light went off. The lights in back stayed on.
I removed the hard drive and rebooted, it turned green for 5-10 minutes then reverted back to a solid orange, blinking orange, then went off.
Next I purchased a remanufactured internal power supply, and installed it (without the hard drive in). It turned green almost immediately. After about 15-20 minutes, I decided to try to install the hard drive again, booted it up, and tried to erase the hard drive with was working properly according to the software. It stopped erasing the disc after about 20 minutes and turned solid orange again, then blinking, then no status light (but back lights were still lit).
I'm a bit flabbergasted at this point, any suggestions on what to do next? I think i've pretty much replaced everything except the logic board, but can't seem to find any information on the symptoms of a logic board malfunction.
Thanks!!!!!!!

A Gen3 is identical board to a Gen4 although they have some differences in firmware and wireless card was updated on every model.. but a Gen3 is substantially faster than Gen1, Gen2 which also have identical boards.
You can with careful shopping get a Gen3 pretty cheap.
Most use a delta power supply which I think is a lot better than the flextronics used in most Gen1/2
You can sell back the parts to ebay.. people still would buy the power supply etc. Even just the case can be useful to a repairer.
But if the board is gone.. it is hard to repair.. not impossible.. but hard.
Gen 3 and Gen 4 are not without faults.
See this page.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
I have fixed it a different way.. by using the small converters you can buy in bulk from ebay for $1 each.. KIS3R33 .. they produce 3.3V at 2A peaking at 3A.. amazing.. I keep using them to replace onboard power converters by removing the inductor and simply power directly.. the end result has worked great. You can simply change the resistors around and get any output from 1v to 20v depending on input.
Is it worth doing it .. no of course not.. it will waste many more hours than $50 is worth.. but it is kind of fun that you can actually make things work again.
Here is a pic of the Gen 3 totally powered by me. All onboard power removed.
This was to track down the fault in the Gen3.. but I am kind of pleased that it ended up neat enough and reliable enough to work for more than a year.. the Gen3 still serves as a way to get Netflix via network for a friend running 24/7.
The units supply (from left to right)
1v, 1.1v, 3.3v, 5v, 1.8v
It is feed by 12v supply which is also directly connected to the hard disk.
So it is possible to fix.. !! Only got to be a bit crazy.

I want to triple boot Have Snow Leopard and XP on separate drives and I want Windows 7 on another drive, can it be done by temporarily removing the xp drive and installing windows 7 on another internal drive?

I want to triple boot my Mac Pro I have Snow Leopard and XP on separate drives (osx on drive 1, xp on drive 2) and I want Windows 7 on another drive (drive 4, drive 3 is used by osx for storage), can it be done by temporarily removing the xp drive and installing windows 7 on drive 4?
I realise bootcamp only allows 2 operating systems and refit could change the size of my current xp drive to accomodate W7, that is not an option here for various reasons one being the drive is pretty much at capacity with only about 30gig free (I work with video so that free space fluctautes quite a bit). I have a brand new drive 4 with 1TB set aside ready for W7 but I'm unsure how to go ahead?
any help or advice would be really appreciated, thanks

Boot Camp is used to support Windows on the same drive.
You can have a different OS on every drive.
You could have Windows 7, Vista, and XP all on one drive if you so choose.
I recommend not putting Windows and OS X on the same dirve when talking about Mac Pro - unless you just need something small and lite.
Remove all your other drives while you install Windows 7.
You could even relocate XP - if you need it even - or recover the hard drive space.
You should always keep 30% free for Mac OS; same for data/media drives.
Considering 1.5TB WD Black $110.... and you want OS X to be on a fast high performance drive as well.

Lack of sound after Window 7 (64) installation into iMac OX 10.6.7. Tried to install driver from Snow Lepard disc (Cirrus 64).Wizard installed driver. No sound, Device Manager indicated that "driver is not installed" but also that the"device is working"

I don't know how to proceed. I didn't have sound after installing Windows 7 inot iMac OX 10.6.7 (64bit) After unsuccessful attempt to upgrade the driver from the BootCamp file, I deleted the driver from the Sound and Game controlled hoping that I would allow me to automatically install the correct driver from Boot camp.
Now the Sound Video Game controller disappeared from the Device Manager
How can I find out which is the correct sound driver for my computer (The Speaker Properties only say:WIndows)?
How can I install it without seing the Sound and Game controller in the Device Manager?

When you say "manually download", you mean from the BootCamp File on Snow Leopard, or from the Internet.
My additional problem is that the "Sound and Video Game Controller" disappeared from the Device Manager when I removed the previous driver. I don't find the place where I can reistall the new driver.

HT201250 I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?

I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!

1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331)

How can I remove the hard drive from an iMac g4 before recycling it?

How can I remove the hard drive from an iMac g4 before recycling it?

There are take-apart guides online. For example
http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
However, you can also consider securely erasing the hard drive instead. You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive. If this is a viable option, please post back (include Mac OS X version on installation disc).

HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

Similar Messages

Maybe you are looking for