HT5639 On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

Yes, purchase Paragon Camp Tune for the job.

Similar Messages

  • Using OS 7.02, is there a way to increase the size of the folders?

    Before OS 7.02, I could place a number of application icons in a folder.  After the "upgrade" I now am required to look through as many as three subfolders to find the icon.  Can I either increase the size of the 1st folder displayed or decrease the size of the icon so I can fit more of them in the first folder?

    I found the solution today on Microsoft's website.  It worked for Illustrator but not for Photoshop.   If Acrobat would stop crashing every time I open a file - or if someone on the forum could give me a solution to why it does - I could furnish the URL.

  • Hi all , i tried to install os x mountain lion i could not  it said ( There was an error in the App Store. Please try again later. (100) ... now tow weeks

    Hi all , i tried to install os x mountain lion i could not  it said ( There was an error in the App Store. Please try again later. (100) ... now tow weeks

    Hello, might be good luck on your part!
    Anyway...
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk.

  • Is there a way to increase the icon size (and the text below) without using zoom?  I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

    Is there a way to increase the icon size (and the text below) without using zoom in iOS 7?  I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

    Hello Apple.
    It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed?  (It's not with the Mac.). And for so long too.
    Do you employ people with actual accessibility problems to help you do UI design?
    I think too, that some buttons are too close for people who might have motor control problems.
    I love my iPad but I fear as I age, the iPad might not keep up with me.

  • Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus

    Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus.

    In short, no. There is no fix yet. They only barely acknowledge there is a problem. The "fix" is to enable 200% UI scaling which makes everything comically huge and unusable. This is pretty much of a joke. A really, really EXPENSIVE joke.

  • Is there a way to see the size of my ICloud backup files, so I can determine which one I want to use?

    Is there a way to see the size of my ICloud backup files, so I can determine which one I want to use?

    Go to Settings>iCloud>Storage & Backup>Manage Storage.  Your backups are listed at the top, along with their sizes.  Note: this will only list your most current backup.  You may have your previous two backups available too but you cannot access any size information about them.

  • Is there a way to choose the size of a picture, using iPad 2?

    Is there a way to choose the size of a picture, using iPad 2?

    Choose picture size using 3rd party apps?

  • I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? thank you in advance

    I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance

    Call Apple Care. 
    #1 - You have 14 days from the date of purchase to return your computer with no questions asked.
    #2 - You have 90 days of FREE phone tech support.
    #3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years.   You can obtain AppleCare anytime up to the first year of the purchase of your computer.
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. 

  • Removing Boot Camp Partition after now using Parallels

    Is it possible to completely remove the boot camp partition (under Snow Leopard) without having to reformat the HD and reinstall everything? I don't need it now that I am using Parallels with an XP virtual machine installed on my OSX partition.

    utahmac1 wrote:
    I ran the assistant and did the restore. Now when my computer turns on I have to hold the option key to get to the mac log in. There isn't the windows boot up option any more. However it wont just boot up to Mac. Any ideas?
    Once in OS X go to System Preferences - Startup Volume and set OSX to be the default.
    On the next reboot ist should automatically boot into OSX.
    Regards
    Stefan

  • IMac has been updated and I don't have install disk for 10.6 or later.  Can I still proceed with using Boot Camp 3.0 to install Windows?

    I have an iMac that has been updated to Mac OS X 10.6.8.  When I purchased the computer, it came with Mac OS X 10.5.6.  Will I be able to use Boot Camp 3.0.4 to install Windows without a physical disk of Mac OS X 10.6 or later?  Could I get around that if I've backed everything up to Time Capsule?  How do I take care of any drivers I may need?
    Thanks!

    Hi,
    you need the OSX Snow Leopard Install DVD since it is the only valid source of the BootCamp Drivers.
    The 3.0 version of the BootCamp Drivers is only avaiable on the disc.
    Later updates (3.1 and 3.2) can then be downloaded from Apples Support website but require that the 3.0 drivers are already installed.
    Easiest solution IMHO is to buy a retail OSX Snow Leopard disc for USD 29.
    Btw. the seller of your Mac should have included the install disc for the OSX that is on the harddisk.
    Regards
    Stefan

  • IMac won't boot OsX Partition after Bootcamp install/uninstall.

    Hello,
    I have bought 2 late 2012 21.5 iMacs last year and have used both the same way. Here is what happened with one of them recently.
    Fisrt af all I've installed bootcamp 1 year ago in both iMacs without issues and was ok so far, and was using exclusively Windows 7 partition. The trouble iMac started with some startup issues during boot/reboot (screen was frozen with green/grey horizontal lines), but worked fine after following manual start up.
    Lately I've been trying to boot from OsX partition and it freezes in the apple logo every time.
    I have already done the SMC / PRAM procedures, without success.
    I have tried to download and do a fresh OsX install (Mountain Lion, Mavericks and Yosemite). Can't boot from Mavericks / Yosemite flash drive install (both freeze at apple logo - horizontal lines), and only had partial success with one Mountain Lion 10.8.5 flash drive install that booted all right and the first part of the installation process was ok, but after the initial reboot, it happened to freeze the same way before.
    The iMac failed to boot in safe mode (stops booting at 25% and then freezes on apple logo), and show no issues with AHT tests.
    I can boot in single user mode, but it reboots after a few seconds. I noticed some errors messages during this boot.
    It fails to boot in verbose mode, showing a few lines of errors (images attached), and then freezes in a green horizontal line screen.
    I can still boot from Bootcamp flash drive and Ubuntu Flash drive, and install both OS. The only issue is with OsX itself. I have used Gparted in Ubuntu to Format the hole partition to HFS+, and can't find any errors in hard drive tests.
    I thought about buying a thunderbolt cable and try to do a Clone of my other iMac, but don't know if it will work.
    Any other tests/suggestions about this issue?
    Regards,

    Fixed the problem with this setup
    Of course this means i just lost 4GB.
    Let me tell the full story.
    In the beginning, long ago, once upon a time. My iMac had 2x2GB ram sticks which were in the two DIMM1 Banks. I then told myself "I WANT MORE RAM BECAUSE LOLZ". So i bought 2x4GB ram sticks. The two empty slots were Bank 0/DIMM0 and Bank 1/DIMM 0. and I added them in there. having done that, I booted OS X up, worked great, had 12GB, everything was shiny and beautiful. Soon after I wanted to try it out on windows. I restarted my computer and BAM the blinking cursor just sits there, being stubborn and all. I then told myself "holy balls, this new ram i got is bonkers" (them words, I blame the language filter). Then after giving it a little thought, i just asked myself if it was because I had ram from two different manufacturers. I removed my old ram, which has nice Samsung stickers on them, and booted it up on windows. Still had the same problem, I then decided that maybe this is all really mentally challenged so to win I had to think like a retard. I took my new ram and inserted it in the same slots where my old ram sticks were (DIMM1 Banks), booted windows up and IT WORKED.
    I still hold all of my WHYs on this subject but I will keep messing around to see if I find a better solution than just leaving both DIMM0 banks empty

  • Can the boot camp partition be resized once windows is installed and running as virtual machine using vm fusion ware?

    I have macbook air partitioned 505/50 and running OSX and win 7 side by side as virtual machines using vm fusion.  Can the partition size be changed without starting over?

    Very helpful.  I started with vm ware to create a pseudo drive but could not import win 7 over home network.  mac has no immediate way to connect to network without adapter, and has no cdrom.  So i used boot camp to create partition, then made a bootable win7 iso file on a memory stick using win 7 usb/cdrom download tool from microsoft, and rEFIT to get mac to boot from the mem stick into the dos partition.  Then i ran vm fusion to import the win 7 partition as a virtual machine.  OSx and win 7 run side by side.
    Seems from what you say that sizing cannot be accomplished without deleting partition and starting over.  If I start over and just run vm fusion to create he win7 virtual machine, not sure how I would bet the minimum win 7 os into the ac.  Perhaps vm will boot from the mem stick using refit.  Do you know?

  • HT4500 How long will it take to transfer 400gb from time capsule to my iMac using mountain lion

    I did a clean install on my iMac. Now I cannot access my backups. I can see the time capsule, but when I open time machine, I only have today  which is the newly installed system. I am now trying to use migration assistant to grab my files. I got to where I choose my time machine and entered my password. Now I don't see any action. How long will the transfer take?  My 500 gb time capsule is full. Should I be seeing something on my screen.

    This depends on what the connection type is for the computer to the Time Capsule - wireless or Ethernet, how much data are involved, what generation of Time Capsule, and whether the transfers are to an HDD or SSD.

  • When I used mountain lion in a preview of a picture I could just press the icon that was a box with an arrow pointing up and that would allow me to share (message, email, Facebook, etc) the image.  Now in Yosemite in preview if I click the box-arrow

    When I used mavericks in a preview of a picture I could just press the icon that was a box with an arrow pointing up and that would allow me to share (message, email, Facebook, etc) the image. Now in Yosemite in preview if I click the box-arrow

    Found my answer in another thread-  this is what I did
    GO to System Preferences > Users > Right Click on your Name > Advanced Options > and refresh your UUID
    Restart your System and the widgets are all back
    This solution worked fine for me!

  • Is there a way to change the size of my photos so they don't use up my iCloud storage?

    I noticed that my pictures have a very high pixel ratio and therefore takes up alot of space in iCloud.
    I know that that once they have been saved to my laptop I can change the ration then but that doesn't affect the storage space in iCloud.
    Any suggestions?

    Go to Settings>iCloud>Storage & Backup>Manage Storage.  Your backups are listed at the top, along with their sizes.  Note: this will only list your most current backup.  You may have your previous two backups available too but you cannot access any size information about them.

Maybe you are looking for

  • Handling Non-English characters in the payload

    Hi Gurus, We are currently facing an issue in XI with Non-English characters. When we are trying to process Non-English characters in the payload , they are getting converted in to Junk characters at the receiver end. This scenario inbound to SAP ( F

  • Can't find code for std web dynpro app but can seeit's name in the package?

    Hi All, We're using ECC6 and EPP 7.01 SP4. We've recently uploaded some new packages.  Within one is a Portal Buyer role (1.4).  I would like to access the code for one of the standard web dynros.  I retrieved the name of the application from the ivi

  • LMS 2.5

    I have installed LMS 2.5 and Campus Manager 4.0.2. I have discovered the devices using the Device Seed option by importing the seed into the Campus Manager. Under the Capmus Manager -->Administration. the Device Discovery has been running since Frida

  • Server Load Balance on 6509

    Cisco gurus: I configed slb on two 6509s (native IOS, version 12.1(12c)E5). The performance is disappointing. The traffic to load balaced servers is about 4M/s. Previously, cpu load was less than 5%, now it's 30%. sh run sometimes takes 10 minutes to

  • POP3 Email on Droid 4

    I set up a pop3 account on my wife's Droid 4.  For some reason it will not mirror our email.  If I send a message from her Droid 4 it is received by our account and her device.  I sent a test email from her device to Verizon support and it was receiv