HT5704 After downloading and installing this on an iPad mini cannot connect using wifi

Did anyone experience this after installing the update

try reseting your newtowrk settings, go to settings, general, reset, reset network settings.

Similar Messages

  • After downloading and installing an app in sharepoint i cannot open it

    I am using SharePoint 2013, and i want to configure high-trust apps for SharePoint.
    I followed those msdn articles :
    Http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx#Createapp2
    http://msdn.microsoft.com/library/office/fp179923
    My problem now is the following:
    After downloading and installing any app from the app store or even deploying it from Visual Studio, when i want to open the app it displays a blank page and shows the following error message:
    This page can’t be displayed.
    Make sure the web address http://apps-95e7c833b3f075.sp.local is correct.
    So as you can see my domain is `sp.local` and my app prefix is `apps`...
    Sorry my problem is a bit wide-open.
    I do have an `App Management Service` and `Subscription Settings Service` running on the server.
    I fellow the msdn articles and every thing was set like it is mentioned.
    Can anyone help me please?

    Are you able to ping url apps-95e7c833b3f075.sp.local
    Use fiddler to check for any help
    perform nslookup for URL apps-95e7c833b3f075.sp.local
    Check if you have any host entry on server
    Check if IIS binding are proper on all servers.
    Are you trying it with service account. if yes, service account dont work properly with app. user different account
    what permission do you have on site
    If this helped you resolve your issue, please mark it Answered

  • After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and

    After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and a new download, but the problem's always there

    Try this: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Windows XP SP 3 does not recognize HP Scanjet 3770 after downloading and installing driver

    Hello !
    I have a second hand HP Scanjet 3770 scanner.
    After downloading and installing driver there is only 1 icon on my desktop - Image Zone.
    There is not icon of HP Director software, neither on desktop nor in C:\Program files\HP folder
    Windows XP SP 3 does not recognize HP Scanjet 3770 after downloading and installing driver (Image Zone software)
    There is another scanning HP device installed on the same computer - all-in-one HP Photosmart C 4280
    What I have to do ?
    Thank you !

    Some things that pop in my head- your CD/DVD drive may need cleaning (laser eye). There are discs to do this or you can use a cotton swab sometimes to wipe the laser. OR- the last recovery may have been the last fatal strain on the CD/DVD drive and it is now not functioning. Maybe you could borrow the drive from the other Dv4 and try it- or  borrow/buy a USB CD/DVD drive to try.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity. Right before i installed additional content I was working on a project, and everything was OK.

    After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity.
    Right before i installed the additional content I was working on a project, and everything was OK. What is wrong. How do I make Logic reconnect to the instrument files?

    Whitelab Records wrote:
    So, 20 views and nobody's anybody the wiser?
    A small update to this issue....
    I have been trawling the forums to find an answer but to no avail...
    And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
    Same problems.....everything is audible in audition but nothing plays on playback.
    Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
    To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

  • HT204490 After downloading and installing OS X 10.10.3 update I have not been able to open my Photo App.  It opens and shuts down right away. HELP?

    After downloading and installing OS X Update 10.10.3 I am not able to open my Phot App.  It opens and immediately shuts down.  I've sent messages to Apple for help and no answers.  Help!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

    I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
    Thank you.

    Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
    Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
    Thanks again.
    John

  • The last update failed on my window 7 pc, resulting in me having to try it manually download and install, this also failed leaving my I tunes not working, I tried restore back to a safer date, but every time it tried to update it failed. eventually i

    The last update failed on
    my window 7 home prermium pc, resulting in me having to try it manually download and install,
    this also failed leaving my I tunes not working, I tried restore back to a
    safer date, but every time it tried to update it failed. eventually it told me
    to delete and reinstall, this fails due to the apple mobile device service
    failing to start, and asking me if I have sufficient privileges to start system
    service, I have tried all suggestions on iTunes page, ie delete everything to
    do with apple, and start as administrator, nothing works, help please

    I too have tried the latest iTunes (12.1.1.4) in Win7. I did a search for latent drivers as you noted but found none. I am glad it worked for you - I'm still no-joy at this point. I'm able to install AMDS over and over again, without issue - it just doesn't start then iTunes launch fails with Error 7. I have to manually remove it.
    I am able to connect my iPhone via USB cable and access my photo storage on the phone. I am just not able to install iTunes anymore. I have attempted resolution to this issue for almost two months now. Until that time, I was content with what was installed. It was only when the proverbial update box appeared that I attempted to 'update' my iTunes. WHAT A MISTAKE putting blind faith into an Apple request to update. I SUGGEST NOT TO UPDATE YOUR ITUNES IF IT IS RUNNING PROPERLY!
    I realize now, once again I might add, my reliance on software provided by others. It's like anything else, I shouldn't rely on just one method for anything. Time to search for a more pleasant alternative than Apple. Truly, when it worked, it was good at its job, but now that I am wasting time I am looking seriously at upgrading to another type of smartphone and media management software. Way too much trouble for anything as simple as this should be. I wonder, is this a result of another feud with Microsoft?

  • After downloading and installing 3.6.11 latest Firefox version, cannot conect to the web. Found old 3.0 version, re-install, back on the internet. What was wrong?

    After downloading and installing 3.6.11 latest Firefox version, cannot conect to the web. Found old 3.0 version, re-install, back on the internet. What was wrong?

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.0 r45
    # Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • After downloading and installing software for AirPortExtreme, Skype will not open.

    After downloading and installing new software for AirPort Extreme from the Appstore, Skype will not open.

    Did you repair permissions and restarted your computer after the installation? 
    Skype has their own forums for Mac users.  You should post there if the above does not work. 

  • Slow after download and installing Aperture 3 on my Mac with OS X Lion 10.7.3. Have any one else same experience and an idea of how to solve the problem ?

    My recently bought and up to date MacBook Pro 17" became very slow after downloading and installing Aperture 3. Is there onyone out there who have experienced the same problem and have an idea of how to go about fixing the problem ?

    Are you experiencing the slowness only when you are running Aperture or all the time since you installed it?
    Have you done anything with Aperture, imported images, iPhoto library etc?
    How much memory is in your system? Did you have any external disks attached? How big and how much free space is there on your internal disk?

  • Should I download and install the latest version of Adobe Flash to use with Lion?  My need for Flash is very basic: Google Maps, YouTube, and content on certain websites.  Thanks for any help you are able to provide.

    Should I download and install the latest version of Adobe Flash to use with Lion?  My need for Flash is very basic: Google Maps, YouTube, and content on certain websites.  Thanks for any help you are able to provide.

    Thanks for the speedy reply.  I have read so many comments about Flash being incompatible with Lion I was wondering whether to download it or not.  So many sites on the Web still require flash, however, you almost don't have a choice but to download it even if it is incompatible.  I gather a better version of Flash will be available for Lion soon.  Again, thanks for the help.  I will download the latest version of Flash.

  • My new IPad 3 cannot connect to WIFI even it has a full bar of the reception. In the same location, my PC and my smart phone get a full bar connection without any issues.  How can I do to fix the issues (can I switch to IPad 2)?

    My new Ipad 3 cannot connect to WIFI even it has a full bar of reception. In the same location, my Windows 7 PC and Andorid Smart phone can connect to the same WIFI without any issues.  How can I fix it?  Without WIFI, the WIFI only IPAD is nearly useless. If it cannot be fixed, can I get a replacement for IPad 2?

    Take it to an Apple Store for evaluation. If defective, you'll get a replacement.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • After downloading and installing a security update an hour ago, firefox will not start

    After going online this morning, using my firefox browser, a box came up saying a security update was available and should be downloaded and installed. This was done with no apparent problem. At the end of the update a note came up saying the update would come into operation after restarting my computer. This I did. The computer started normally, but after clicking on the firefox icon the program did not start. My computer is using Windows XP Service Pack 3.

    hello tncovery, does it work when you download the full setup file from getfirefox.com again & install it on top of your current installation?

  • After downloading and installing the 64-bit version of iTunes for Windows I get a "Congratulations, you've successfully installed iTunes" message. However, when I plug in my iPhone to synch it I get a message that says that I don't the 64-bit version??

    After downloading the 64-bit version of iTunes on my Windows 7 machine I get the "Congratulations, you've successfully installed iTunes" message.  However, when I plug in my iPhone I get an error message that says, in part, "...the required software is not installed.  Run the installer to remove iTunes, then install the 64-bit version of iTunes".  I've been at this for hours, carefully deleting all Apple software (Apple Mobile Support, Quicktime, etc. and before each attempt to install the 64-bit version from Apple ( no third parties).  Same result each time!!!  Any ideas????

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

Maybe you are looking for

  • Ora-01008 error with bind variable

    Hi, We have a test program which have one bind variable on a column which is varchar2(20), in the test program we've passed a 20 character string to the variable. The program returns error in one of the databases but all others are successful. We've

  • Restriction in Material Document Line item

    Dear SAP Gurus, I am new to SAP. Please let me know is there any way by which i able to restrict no of line item in Purchase order (for specific Purchase order type) document? Your help will be appreciated.

  • Strange problem with sms

    Hi, I am in a big problem here so please help me. My problem is that i have an app that sends sms and it used to work well, but when passed to some devices they dont send anything. Now the same app was deployed to a blackberry curve and it sends the

  • Leopard on my macbook, will it run as well as tiger?

    i have a 1.83GHz intel core 2 duo macbook with 512 ram. can anyone tell me if upgrading to leopard when it comes out will make my mac run slower or would it even run faster? i am most worried i don't have enough ram to really support leopard.

  • Internet Sharing via USB cable

    I have a nokia lumia 720. I want to connect internet to my pc through my Phone via usb cable. how can i connect internet via usb cable to my pc. My pc has no wifi connectivity. Solved! Go to Solution.