HT6065 I have OS X 10.7.5 and am trying to download mavericks v 10.9.1 but nothing happens. I log in and download shows but nothing happens when I click it. Any help? Ta

I have OS X 10.7.5 and am trying to download mavericks v 10.9.1 but nothing happens. I log in and download shows but nothing happens when I click it. Any help? Ta

Its a 5.3 GB file. It might takle a while to download.
When done, it may open automatically, but the file will be in your apps folder
Grant

Similar Messages

  • Nothing happens when I click on any Help pulldown menus

    I have a G3 iMac and use a Seagate 160GB external hard drive. I've maxed out the memory on the iMac -- I only have 500Mb left. Yesterday, I noticed that none of the Help pulldown menus worked -- e.g., when I click on Mac Help or iPhoto help, nothing happens. Also, when I try to open iCal, nothing happens. Do I need to delete some files and create more room on the internal hard drive to open Mac Help and iCal?
    Any advice would be appreciated.

    Use Disk Utility to repair Permissions. You can find DU in Applications/Utilities.
    Click on your hard drive name at left, then the "Repair Permissions" button at bottom right. It will take a few minutes. This is normal.
    Run "Cron" maintenance scripts. This normally only happens between 3 and 5 AM, when the computer is powered on. But with help from Terminal they can be run anytime. (Terminal is also in the Utilities folder)
    In Terminal: (TYPE) sudo periodic daily weekly monthly (PRESS ENTER)
    You will be prompted for your admin password - you will not see the password as you type it. Press enter again. Cron scripts will take a couple of minutes to execute - be patient.
    Use Terminal to Update Prebinding (Optimize the System)
    (TYPE) sudo update_prebinding -root / - force (PRESS ENTER)
    Enter your Admin password as above.
    You should restart the iMac after running the above tasks.
    If you feel uncomfortable using Terminal, go to
    http://www.versiontracker.com/macosx
    and look for "Onyx" (freeware) or "Cocktail" (shareware) they do all the above, and a couple more things for you in a nice GUI package.

  • When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Currently using iPhoto 7.1.5   We recently upgraded from Leopard to Snow Leopard with updated Quicktime player.  Our videos off our camera no longer open in Quicktime by double clicking.  Any help?

    We are running iPhoto 7.1.5 '08.  After upgrading to Snow Leopard 10.6.8 and Quicktime Player 10.0, our videos off of our camera no longer open by double clicking.  Any help?

    Thank you for your quick reply.  I'll give it a try.  Another workaround I figured out last night is to right click the video, click show file, and then double click the file. Quicktime the plays the video.

  • HT203163 I have windows7 and can't get my itunes to open. When i click on itunes help, it says I'm not connected to the internet when I am

    I have windows 7 and can't get my itunes store to open. When I click on itunes help option, it sends message that i am not connected to internet, when I am.

    I have windows 7 and can't get my itunes store to open.
    Could you walk us through what happens when you try to connect to the Store, please?

  • Please help.  getting desperate. i cannot set up 3g on my ipad 2. when i go to mobile data in the settings there is no option to view account. which is apprently what i need to click on, any help greatly apprectiated

    please help.  getting desperate. i cannot set up 3g on my ipad 2. when i go to mobile data in the settings there is no option to view account. which is apprently what i need to click on, any help greatly apprectiated

    I got mine (2 weeks ago) 64GB WiFi+3G (Verizon) from the apple store online
    I didnt have to do anything to it, turned it on, activated it, got it on my home network then I signed up for the 3G data service, it works where ever I happen to be. (if there is an unknown WiFi connection available it asks me if I want to join before it continues to connect to the 3G when I am surfing or getting e-mail)
    do you have an Apple Store close enough to travel to?
    I am only assuming here, but since you have a SIM you are not in the US correct?

  • When I click on any ap icon, that screen opens for a nanosecond then closes back to original screen. Help!

    When I click on any app icon, the app screen opens for a nanosecond then returns to the original opening screen. Help!

    Basics from the manual are restart, reset, restore.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Did you check the Zoom setting?
    Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
    If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

  • Disappearing of error message when i click on f4 help

    Hello all,
    I've got a little problem with displaying messages in WebUI (CRM 7.0) .
    when i do some wrong entries in assingment block and then i press enter then it display error message but
    when i click on f4 help the error message got deleted from the ui.
    I want error message to be displayed till entry is not filled with right value.
    I have written this code in modify method of handler class.
    lr_core = cl_crm_bol_core=>get_instance( ).
          gr_gmsg = lr_core->get_global_message_cont( ).
          gr_gmsg->add_bapi_messages( it_bapi_messages = lt_return
                                      iv_show_only_once = 'X' ).
          lv_object_id =  lr_bp->get_object_id( ).
          lr_msg_cont ?=  lr_bp->get_message_container( ).
          lr_msg_cont->add_messages(
                           iv_object_name   = me->tv_object_name
                           iv_object_id     = lv_object_id
                           it_bapi_messages = lt_return
                           iv_show_only_once = abap_true ).
    Regards,
    Nawal Kishore

    Hi Nawal,
    What is happening now is, the error messages are set to be displayed only once in the Web UI after the message is
    added to the message container. In the next round trip these messages will get cleared since you have passed
    the parameter 'iv_show_only_once' as true in both the add message methods. You should pass this parameter
    value as false in order to retain the error messages on the UI across the round trips. You can simply remove that
    parameter from the method as by default this parameter takes the value as 'false'.
    Regards
    Leon
    [SAP Community Network Forums on mobile|https://cw.sdn.sap.com/cw/ideas/7910]

  • TSV_TNEW_PAGE_ALLOC_FAILED when we click on any buisness role

    Hi Team,
    We are using CRM 7.0
    For one particular user,he is higher Management User so have lot of items to diplay.
    After login when he click on any buisness role, he get error:
    No more storage space available for extending an internal table.
    And we face dump :TSV_TNEW_PAGE_ALLOC_FAILED
    I know that this is due to insufficent memory but increasing memory will not be solution for this and as I am getting there should be something to customize user view.
    Please help in resolving the issue.
    Shivam

    This is basically SE16.
    That is not the recommended way of doing that - it will
    - allocate a LOT of memory on the source system - and that twice: once for reading the data and another time the same amount to fill the export table - and eventually dump (as you see it).
    - create lots of traffic on your network
    - will consume a lot of memory on the PC you download the data to. The grid is to be built on the client, if you're unlucky, your PC may run out of memory too
    SE16 was not designed to "download" huge amounts of data, it's used to display table entries.
    I suggest you create a small ABAP doing that, writing the output on the server and then either enable to user to access that file (using e. g. SAMBA) or send it via email.
    Markus

  • HT1349 When I click on a help subject the screen that appears is frequently blank.

    When I click on a help subject the screen that appears is frequently blank.

    I also have this problem. The Number two shows up in the App Store screen. I go to purchases and there are no apps that require updating. The number two in the App Store still remains on my screen. Has anybody found the solution yet? I called Apple, Only to be told that I should back up to iTunes on the computer, and then restore my iPad from the computer to eliminate the number two on the App Store screen. I'm hesitating to do that. Suggestions?

  • Unable to get Text to work on iMovie. Clicking on T gets me options, but when I click on any of them, nothing happens.

    On iMovie 11, an unable to use Text. I click on T and get options, but nothing happens when I click on any of the options.

    Thank you so much!  Such a simple solution after hours of frustration!

  • Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off?

    Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in

    See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
    Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    You may also need to remove the cookies from that website.<br />
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • When I click on the 'help' key in the elements 12 program it wants to open it in Firefox2. Firefox doesn't work on my Macbook Pro Air. I use Safari. How do I get it to open?

    When I click on the 'help' key in the elements 12 program it wants to open it in Firefox2. Firefox doesn't work on my Macbook Pro Air. I use Safari. How do I get it to open?

    Hmm, that is very strange. I agree with MichelB that it's probably best just to get the PDF, but you can try going to your username>library>preferences and deleting:
    com.adobe.PhotoshopElements.plist
    Adobe Photoshop Elements 12 settings
    Adobe Photoshop Elements 12 paths
    To see the library, click the Go menu in the Finder and hold down the option key and it will appear below the little house for your user account. While you're in there it wouldn't be a bad idea to go to the Saved Application States folder and delete anything pertaining to PSE.
    Repair permissions and see if that does it.

  • I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Hello everyone, Very recently itunes on my windows computer does not let me access any items in my Library except for "Apps" and "Ringtones". When I click on any other items it flashes the redcircle meaning forbidden".

    Hello everyone, Very recently itunes on my windows computer does not let me access any items in my Library except for "Apps" and "Ringtones". When I click on any other items it flashes the redcircle meaning forbidden".
    When I connect my iPhone or iPad I can see every items on them but not on the iTunes Library.
    They sync fine with iTunes.
    I browse all the menus in iTunes but cannot find any clues to what I have done for it to happen. It worked fine previously.
    Thanks for any suggestion.

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

Maybe you are looking for

  • Marker chart in WEBI

    Post Author: lavanyakumar1984 CA Forum: WebIntelligence Reporting Hi        I need to display Markers (Point where the X and Y axes coincides) in the graph       Is it possible in WEBI?      Is it possible to create combinational graphs in WEBI like

  • VHS imports drop-out

    I asked about this b4 but have found no resolution. Im importing VHS tapes into iMovie through a Pinicle DV box. The problem is, I cant walk away because every few minutes the tape stops being imported and I have to restart the process from the drop

  • Ld.so.1: mail: warning: /usr/lib/extendedFILE.so.1: open failed: illegal insecure pathname

    Hi all, DB: 11.2.0.3.0 Oracle Apps:12.1.3 O/S: Sun Solaris SPARC 64 bits We are facing a peculiar error that is captured in Concurrent Manager Log due to CM goes down frequently Error Message: ld.so.1: mail: warning: /usr/lib/extendedFILE.so.1: open

  • Location of My iBots folder in OBIEE

    hi.. I can not save my ibots from the presentation services. the OBIEE server is a Solaris machine. I have checked all the possible options but its not saving. the last chance is I doubt there may be no write permission to the My iBots folder. Can yo

  • Is it possible to download a comma delimited file from ABAP to a Portal

    directory or Web Dev URL on the Portal? We currently have a comma delimited file being emailed nightly using standard SAP FMs to a distribution list. We want to move these files to the Portal instead. Speaking with our Portal guys, they say the easie