HTC to Reviel Soon.! Another Variant of the one m8

HTC will in near Future Release another Variant of the One m8 with this new Unit it it will be as Mentioned Waterproof and have a Possible Better Camera we can only Hope b33
I Posted the Link Below to Let ya Read More About the Phone, In the Reading of the Article it says it will Go Over Seas, But Hopefully it will be released here in the States and Comes to Verizon as the phone from the Looks of the Photos looks Quite Nice..
HTC Unveils Newest J Butterfly, a Waterproof One (M8) With a Real Camera | Droid Life

My lord, does anyone use their phones to make calls anymore?
My wife shoots photos of trees as we travel on the highway.
Sort of like those Connie & Jack commercials for Consumer Cellular.
She takes a photo of a knot hole on a tree and her husband does a double look and wonders what she took? Very funny.

Similar Messages

  • I want to buy a MBP with  retina display, can I get the keyboard in another language than the ones listed?

    I would like to buy my new mac in the states, but want the keyboard to be in another language than the ones listed (english, french, spanish and japanese). Is this possible if I contact them?
    Btw, I know that you can change the language in settings, but I want the physical other keyboard, not to just change it on the mac!

    EmilyVictoria wrote:
    hopefully they can do the same at the apple store Thank you!
    I think they can from a physical retail store, but you should ask them directly.  Normally the kinds of keyboards available via special order should be those shown at the site below, but I have heard that some probably are only available outside the US.
    http://support.apple.com/kb/HT2841

  • Another variant of the mount_smbfs error

    I too am having issues with this problem, however, it is of a different nature.
    One night, I can connect and transfer files like always. The next morning, no dice. No changes to anything, nothing. I get the "Windows cannot find xxxx. Check the spelling and try again..." dialog.
    I was always able to connect to my mac by either mapping a network drive to //192.168.1.2/Zim or typing that address into an address bar and authenticating. In the past, both methods have worked no problem.
    From the Mac side, those familiar with Server 2003 know Windows machines have a hidden share on the root of each drive. In this case, I wanted to connect to C$, the hidden share for my C: drive. I would open the "Connect to server..." dialog from Finder, and type in "smb://192.168.1.3/C$" and it would connect me after authentication, giving me that share in the Finder. It would also work when I used smb://Thinkpad/C$. That method now fails too. I set up an actual share on the drive to test, the share being C, and attempt to connect to smb://192.168.1.3/C, and nothing. I get the -34 error.
    When I check my logs, this is what i see:
    +mount_smbfs: can't get server address `THINKPAD.':+
    +Unknown host+
    +mount_smbfs: can't get server address: syserr = Network is down+
    (I also tried the IP address of my Thinkpad, same result)
    In my Firewall log (which I had on up until trying to diagnose this problem), I have:
    +Sep 5 13:22:11 PowerMacG4 ipfw: 12190 Deny TCP 192.168.1.3:1107 192.168.1.2:80 in via en0+
    +Sep 5 13:22:14 PowerMacG4 ipfw: 12190 Deny TCP 192.168.1.3:1107 192.168.1.2:80 in via en0+
    +Sep 5 13:22:20 PowerMacG4 ipfw: 12190 Deny TCP 192.168.1.3:1107 192.168.1.2:80 in via en0+
    Allowing those ports in Firewall doesnt help, as the next attempt uses a different port. Note that I am trying to fix this with the firewall off, but am turning it on to get feedback as to what the network is doing.
    My network isnt down, my NetBIOS setting in Windows is set to "Default", the gateway and subnet are the same, and there are no other conflicts. Like I said, worked one night, 12 hours later it did not.
    Help!!

    Just wondering... have you tried a Permission Repair lately on the Mac?

  • I need help modifying my iWeb site from another Mac than the one it was designed on:

    I did exactly as directed in the Help file "to Modify your site from another computer", but when I click on the Domain file it launches iWeb to start a new website without anything from the site I created. The Macs are a mirror image of each other with the same iWeb version 3.0.4. I am transitioning from my MacBook to my new iMac, so the laptop files were all transferred to the iMac by the Apple Store when I bought it. The only difference is that the laptop is OS 10.6.8, and the new iMac is OS 10.7.5. After the transfer of all the files at the store, I proceeded to make the website on the laptop, but now need to work on the website from my iMac...but I need help getting the file to work on the iMac.
    PLEASE HELP!
    Thanks!

    The trick that solved it for me was the last note about how to make the hidden folder appear (due to Lion OS 10.75):
    Note for OS X Lion users :
    To show the hidden Library folder in the Home Directory (Cmd-Shift-H) hold the Option (=Alt) key when choosing theGo menu in the Finder.
    Thanks!

  • Is there a way to query another database from the one I am in?

    I have 4 company databases setup in SBO, and would like to generate several queries that list inventory on the other company databases, without having to log out or company A, then into company B list to check inventory. I have seen this done before, but cannot remember how to do it. I have tried the following without any luck:
    SELECT *  FROM [MyDBNameHere].[OITM]  T0
    Thanks guys.
    Mike

    Hi Mike,
    Welcome you to the forum.
    You may try:
    SELECT * FROM MyDBNameHere.dbo.OUSR T0
    Thanks,
    Gordon

  • HT4430 can i restore my imac quad core  system from a restore on a flash drive? and if not how do i go about getting another copy of the one for my imac?

    Hello I am having a serious issue here and with my limited mac skills i feel like im in a bad spot of potentially loosing everything on my hard drive. i cant replace many of my photos of my daughter and i have videos i have saved from performances i have no way of getting them anywhere else.. help
    i need to find a way to get my system up and running it keeps asking me for the OSX but says there is a problem with the install and wont go any further.
    I maved earlier this year and as my apple care ran out so did the location of everything i tried to organize so well. my RESTORE disk IS LOST!!! Grrrrrr
    Help what do I do? Someone out there in Mac Land please advise me of your supreme know how!
    Thanks for your time and I can use all the help I can Get!
    Sincerely,
    Summerlynn Rivera

    You need to contact Apple Customer Service about purchasing replacement discs for the computer. You have posted in the PPC forum, so I assume you do not have an Intel Mac, but since you haven't stated what you have we simply don't know enough to assist you.
    Customer Service: Contacting Apple for support and service - this includes international calling numbers.

  • How can I add old bookmarks from another computer to the ones I have on my new computer?

    My old computer crashed; and was replaced with a new one running Windows 7. I had saved my bookmarks, but couldn't find the thumb drive where they were saved, so began using Firefox on my new computer. Now I have bookmarks saved onto my new computer, but want to upload and merge my old bookmarks. I've only found a way to restore bookmarks that will complete wipe out the new ones. Short of writing down all the new ones and adding them back after restoring the old ones, is there any other way to merge the two?

    Profile is a folder which store all your personal data in a safe place
    * https://support.mozilla.com/en-US/kb/Profiles
    * here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
    * here explain how to restore it
    https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

  • I have several firefox tasks running simultaneously but when I try to access a site, it opens in another task, not the one I am currently using.

    On my task bar I have several copies of firefox running simultaneously - I need this for work. Recently, however, when I access one of these and go to a new web site, firefox opens the web site in one of the other tasks instead of opening a new tab in the current one. It's probably some setting but I can't correct it. Can you help? Thanks in advance.

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies
    See also http://kb.mozillazine.org/The_page_is_not_redirecting_properly

  • Using another computer then the one I orignally registered on.

    My buddy setup his Ipod on my computer because I have high speed internet and he didn't. Now he has high speed and will be using his computer instead of mine. What will he have to do?? Will he lose the music on his Ipod when he plugs it into the computer?? Any help would be great...I am a newbee at the whole Ipod thing.

    Hi jaman1,
    This article: http://support.apple.com/kb/HT1202 provides detailed information about using the iPod with multiple computers.
    He can leave it set to automatically sync which would erase the iPod and automatically sync content from iTunes on his computer. He can also sync the content manually which would not erase any content but allow him to add more. Either way iTunes will prompt him before it erases anything.
    -Jason

  • Use pages from other templates...not just the one you chose.

    Is there a way to choose a page from another template besides the one I started with. For example if I choose the "School Report" template, but want to also use a page from the "Lesson Plan" template, how can I do this. If you click add new page, it only gives you the initial template pages. I tried opening a new template and copying and pasting the page I wanted, but it does not work.

    My guess is that it's because the objects are floating ones.
    If you switch them as inline one, you will be able to copy the page, sometimes after inserting section breaks.
    Yvan KOENIG (from FRANCE mardi 10 février 2009 21:19:34)

  • A new Variant of the htc One M8,  Comming to Verizon

    Sprint has the New M8 Harmon / Kardon edition,  so might it be fitting to see something close to it.. in a Verizon model well as talks goes,  sounds like it might happen,  The name the  "ONE REMIX"  is I guess it possible name..
    When it's exactly coming out..  not said for sure..  but when it does arrive.. I bet it will be packed with some real nice Goodies..
    As for Harmon / Kardon got them on my Toshiba Laptop they sound really Good..
    here is a bit more info on it..
    http://www.droid-life.com/2014/05/14/htc-one-remix-name-tipped-headed-to-verizon/

    if I understand it correctly, the Harmon/Kardon version has the exact same hardware, but the software has a tweaked EQ. In my opinion, it isn't worth considering a separate SKU. If you want an M8, get an M8 now and don't wait for one with gimmicky software tweaks.

  • HP DV6000 series laptop - Shut down immediately as soon as I connect the power Charger

    Hi,
    I am using a hp dv6000 series laptop for last 2 years....  Accidentally, water fell on my laptop and then my laptop itself fell down from the table.
    One the first day when I tried restarting it  there was no response ( No power LED no display nothing, no cpu fan etc ...)
    I disassembled the laptop, cleaned the RAM hard disk, front bezel, keyboard. I used a hair dryer to dry out any of the moisture. My laptop then started showing some response ... now after 4 days .... it is working all fine except the display...
    The problem is :
    1. The Laptop backlight is not working... (but I can see the display with a external flashlight pointed to screen)
    2. The laptop works fine on battery... but as soon as I connect the power charger... it immediatly shuts down.
    Currently because of display problem... I am using the (RDP) windows remote desktop connection from an another laptop to access the desktop.... I logged on from another laptop and checked that all the internal harware parts are working fine.
    Also, sometimes suddenly randomly the display backlight starts working fine and goes off randomly.
    Please suggest. I seached all the online help but I have found no help on "Shut down immediately as soon as I connect the power Charger"...
    thanks.
    Yogi

    yogkoli wrote:
    Hi,
    I am using a hp dv6000 series laptop for last 2 years....  Accidentally, water fell on my laptop and then my laptop itself fell down from the table.
    One the first day when I tried restarting it  there was no response ( No power LED no display nothing, no cpu fan etc ...)
    I disassembled the laptop, cleaned the RAM hard disk, front bezel, keyboard. I used a hair dryer to dry out any of the moisture. My laptop then started showing some response ... now after 4 days .... it is working all fine except the display...
    The problem is :
    1. The Laptop backlight is not working... (but I can see the display with a external flashlight pointed to screen)
    2. The laptop works fine on battery... but as soon as I connect the power charger... it immediatly shuts down.
    Currently because of display problem... I am using the (RDP) windows remote desktop connection from an another laptop to access the desktop.... I logged on from another laptop and checked that all the internal harware parts are working fine.
    Also, sometimes suddenly randomly the display backlight starts working fine and goes off randomly.
    Please suggest. I seached all the online help but I have found no help on "Shut down immediately as soon as I connect the power Charger"...
    thanks.
    Yogi
    It sounds like the LCD power inverter has been damaged and would need to be replaced.  As far as the AC adapter/battery issue, I'm not sure.  It sounds like you need to retire this notebook early. 

  • Another victim of the suddenly-missing AppleTV in iTunes

    I picked up my AppleTV a couple of weeks ago, brought it home and synced it successfully to a G4 iMac. Put some content on it, and it ran quite well.
    Last night I get home, and iTunes cannot see the device any more. The only variable? Installed the QuickTime "security update" that came down the other night. Can ping the aTV, the router can see it, the aTV can get to the internet and view trailers, did the factory reset twice. AppleTV never appears as a device on iTunes 7.1.1(5) on that machine.
    However, my girlfriend's MacBook sees it perfectly. It shows up in the Devices list within seconds and can sync or stream, no problem.
    Steps I've already taken:
    - Powered off the aTV
    - Factory reset the aTV
    - Restarted the wireless router
    - Restarted the G4 iMac
    - Logged in as Administrator and a couple of other users on the iMac
    - Physically removed and reinstalled iTunes on the iMac
    - Verified that I can ping the aTV both from the G4 and the router
    - Verified that all devices are on the same subnet
    - Verified that all devices can be seen by the router
    - Changed channels on the wireless (from 6 to 11)
    - Forced the router to 802.11g-only
    - Read at least ten threads over the last two weeks about similar problems, none of which have conclusive solutions (Apple's troubleshooting page about this pretty much parrots the user guide and is thus useless in this situation).
    Without any of these tricks, the MacBook sees it and works with it. Even with all these tricks, the G4 cannot at all.
    Other fun facts:
    - Firewall is not and has never been enabled on the G4
    - Router is not blocking any ports
    - Router configuration has not been changed (except channel as noted above) in weeks
    - All of this used to work on all machines involved
    And to restate: this all worked perfectly with the G4 for a couple of weeks. I cannot say that the QuickTime update had anything to do with it, and in fact, the MacBook *got this update too* and still talks to the aTV just fine.
    The one thing I haven't done is physically wire the G4 and the aTV to a 10/100 hub and do it wired-style.
    I've seen several threads about this, as I said. Nobody seems have come up with a reliable solution and there seems to be a lot of casting-about for possible solutions instead of Apple investigating this properly.

    OK, even further update... it turns out that the installer for the new EyeTV 2.4 AppleTV-compatible software has a problem with the QT 7.1.6 update.
    Here's the scenario:
    I redid my iMac back to a known-good configuration from a few weeks ago, before the 7.1.6 update. AppleTV now appeared on the Device list just fine, synced up, did everything perfectly.
    I installed the 7.1.6 update, and Apple TV STILL worked perfectly!
    Then I ran the installer for EyeTV 2.40, and as soon as I gave consent for it to modify some device driver it was using, which I assume means it tweaked QuickTime or iTunes somehow, AppleTV disappeared from Devices, iTunes stopped working correctly, and EyeTV itself would frequently hang.
    Reverted back to the next-earlier EyeTV, pulled a good copy of iTunes from my earlier image, and everything started working again.
    Late yesterday, Elgato sent me a link to a new beta version of 2.40, which apparently addresses this problem. It has been reported only by users of PowerPC machines, which is why my fiancee's MacBook didn't have a problem. The new patched code works nicely with 7.1.6 and everything works again.
    Here's the patched 2.4:
    http://s3.amazonaws.com/eyetvbeta/eyetv24_betabuild2654.zip
    I'll post another thread about this with a better subject so that EyeTV owners can find it and deal with it.

  • My Computer Crashes as soon as i Downloaded the Lion, I Want to Re-install the Leopard, How can I do It ??

    I have been Happy with my IMac, and with the Leopard, but as soon as Apple Released, the Lion, I Was a Complete Stupid and downloaded, My Computer seems to be another one, maybe a 10 years old computer, and a Fool One, first when I turn On, come to life in 5-7 Minutes, after that appears a screen, who never appears Before!!, And After that my computer doesn't: Work the sound, the Mail, didnt work, the "wheel" appears every minute, Frozing the computer, It didnt recognize the USB!!!!. The worst Thing APPLE Do, is the LION, if Apple, doesnt Repair ASAP this big mess, Apple, will be in a Downhill!!!!! How, can I Re-install the Leopard, because, this system does not Alow. THANKS

    See Kappy's going back to SL from Lion guide.

  • My links don't work when I combine another file with the pdf

    My internal bookmarked links don't work when I combine another file with the pdf.
    The external links continue to work fine, though.
    This doesn't make any sense to me at all ... but I'm hoping one of you kind folk can help?

    I opened my file and instead of merging files I used insert pages and inserted all of the pages from the file I wanted.  Then I saved the file with
    the same name.  Attached is a rough draft of some helpful hints I put together.  This has been a very painful process for us to discover how to handle
    this and there really is not much help from Adobe.
    Instead of merging files you inset pages. In Acrobat select Document - Insert pages -From file. You can select all pages or some and where you want them inserted. After you do that save the file not save as and all of your links should work. If you combine files or merge files all of the links will break.
                                                                                    GillHarley <[email protected]>                                                                              
    05/07/2009 09:54 AM                                                                                To
                                                                        "Christine Salmon" <[email protected]>                                                                              
    cc
                                Please respond to                                                                              
    [email protected]                                                                                 Subject
                                    dobe.com                            Acrobat Windows My links don't work when I combine another file with the pdf
                                                                        29k833-1Kp0-8ahk                                                                              
    I think it's something to do with naming, but I can't figure out what. This is because it asks to be saved and gives me a Binder no as the name. If I
    press Cancel at that point, I keep the file and the links. But as soon as I need to close it, it asks me again 'Do you want to save this file' and if
    I say 'Yes', I lose all the links, and if yet if I say 'No', I lose the whole file. So at some point it has to be saved but whether I keep the Binder
    no name when I save it, or use the original name, it makes no difference ... it is in the saving of it that it looks the functionality, and yet, if I
    don't save it, I lose the file.
    This makes no sense to me....I hope it does to one of you.
    For instance, Christine, how did you keep your file if you couldn't save it?
    Or have I misunderstood?

Maybe you are looking for