HTML tags showing up in the pages?

I have some strange problems with some pages. Sometimes the </html> closing tag is missing the ‘>’ and therefore ‘</html’ is displayed in the bottom of the page. On other pages I now and then get something like ‘first_field(….’ at the bottom of the page, I can’t remember the exact wording. Has anybody else experienced this?
We do have some problems with our servers cause, very often when you submit a change in the Application builder the browser just displays the IE site not found page. Then you have to press the back button and submit again, and now everything works.
We use version 1.6

Me too it happened, when I edit the page template. I found that it was truncating some character in the text specified header/footer section of the template/page.

Similar Messages

  • HTML tags showing up in the pages also in 2.0?

    Hi,
    After a 5 minutes test of our application after an upgrade to 2.0 I found 3 places where html tags is showing in the bottom of the page. Normally it’s a html tag that is not getting closed. The examples look like this:
    &#60;/
    &#60;INPUT TYPE="hidden" NAME="p_min_row" VALUE
    &#60;script language="JavaScript1.1" type="text/javascript"
    We have been telling the customer that these problems would disappear with the new version, but it have not. I know that we were not the only ones with these problems on 1.6. How are you dealing with this? I can not imagine what our customer is going to say when we tell them that we can’t use htmldb for the project, especially since we were the ones pushing htmldb.
    In release 1.6 the problems were normally only in Internet Explorer and not in Mozilla. I have not been able to check on 2.0, because since the upgrade it is only possible to logon using Internet Explorer. Mozilla gives a script error. :-)

    Hello,
    I have a feeling all your problems are related take a look at this thread. I found it in 10 seconds of searching the forum.
    strange tags
    It's always best to do a quick search first most likely you are not the first person to have this problem.
    Carl

  • How do I ungroup the pages in my doc, I need to move the first to the end, and it shows me all the pages are in a group

    On Pages:  I need to move the first page of my document to the end, and it shows me all the pages are in a group.  How do I ungroup the pages in my doc. 

    Hello there, linafrompereira.
    The following portion of the online Pages Help for Mac provides information on grouping items in Pages:
    Layer, group, and lock objects - Pages Help for Mac
    http://help.apple.com/pages/mac/5.2/#/tan5eab46568
    Group and ungroup objects
    Shift-click to select multiple objects.
    In the Arrange pane of the Format inspector, click Group (or choose Arrange > Group from the Arrange menu at the top of your computer screen).
    To ungroup an object, select it, then click Ungroup or choose Arrange > Ungroup.
    Tip: You can Control-click objects, then choose Group or Ungroup from the shortcut menu. You can also add these buttons to the toolbar: Group and Ungroup.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • The screen where my apps show on all the pages is not letting me drag them. The screen looks kind of gray. What do I do to be able to move them to different home screens, and check, and uncheck the apps in the list

    The screen where my apps show on all the pages is not letting me drag them. The screen looks kind of gray. What do I do to be able to move them to different home screens, and check, and uncheck the apps in the list

    The specific demo would need to provide code for touch events.
    http://www.w3.org/TR/touch-events/

  • I want to skip some html code part when refersh the page, how can we know

    Hi,
    i want to skip some html code part when refersh the page, how can we know when we pressed refresh button or F5 key
    thanks in advance....

    There's not really any simple way to do this. Maybe tracking the page the user should be one from every page in the site and if the page being accessed is the same as the last one accessed, assume it was a refresh.

  • I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine.

    I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine.  Any idea what the problem may be?

    You won't see anything obviously related to iCloud, Jimmy. But if you go to the home iTunes Store page while logged into your iTunes Store account, you should see a Purchases link now under the Quick Links header. That's the only part of iCloud active at this time.
    Regards.

  • Show Top of the Page after Click Save button

    Hi all,
     i have requirement i want show top of the page after click of save button.if you know answer please give reply.
    Regards
    VeerendraNadh

    Hi,
    Would you mind providing more details(screenshot would be better) about your requirement? It would make others easier to find a solution for you.
    Suppose that there is a scenario like this: Edit a page, when content grows too large, page will scroll to the bottom of the page. When clicking “Save” button in the
    ribbon, by default, page will scroll to the top just like it is first loaded in the browser.
    Feel free to reply if this is not what you really mean.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Html tags showing up in trace();

    summary: 1 swf with 3 movieclips. mc1 has input text field
    "name_txt", mc2 has dynamic text field "nameOutput_txt"
    When I:
    trace (mc1.name_txt);
    I get the following in the Output panel:
    "<TEXTFORMAT LEADING="2"><P ALIGN="LEFT"><FONT
    FACE="Times New Roman" SIZE="10" COLOR="#000000" LETTERSPACING="0"
    KERNING="0">TEST TEXT</FONT></P></TEXTFORMAT>
    How do I turn this off? It looks like flash is trying to pull
    the html formatting information from the text field. This same
    information is also populating "nameOutput_txt"
    any thoughts?

    trace (mc1.name_txt.text); // Will show text with no html
    trace (mc1.name_txt.htmlText); // Will show text with html
    tags
    Hope this helps

  • Carousel don't show images, only the page name and a "read more" link

    Good morning.
      I'm trying to get a carousel in my page. I already set a image to one page and on my carousel component, I selected that page.
      When I see the carousel, it shows me the page inputed name and a "read more" link instead of the image.
      Can anyone tell me what's wrong or missed?
      Heres a print screen:
    Thanks.

    What did I do to correct this problem:
       When I create a page renderer component, the same automatically creates a jsp file, with the same name as the component. In my Geometrixx copy sites, there's always a "content.jsp" file in the components, despite of the one with the same name of the component. So, instead of build my pages in the componentname.jsp, i'm doing this is these content.jsp. Just doing this, the carroussel works perfectly. For sure is something that I miss in my own jsp files, but even with the same code (copy > paste), in my jsp the carroussel don't work. Anyway, now I can use it.

  • Dreamweaver Design view does not show parts of the page

    Hello all,
    I was working on a page update - page was created using a
    template so
    that the client can add content with Contribute - and have
    discovered
    that suddenly whole sections of the page are no longer
    visible in Design
    Mode. This caused me some panic until I viewed in code view
    and found
    everything still in there. Viewing in browser shows the page
    there in
    entirety too, and uploads just fine. But no matter what I do
    - restart
    the program, restart the computer - nothing changes, the page
    design
    does not show parts of this page. Everything is in an
    editable area and
    should be visible.
    I have been editing the code as that was my only option, but
    now I have
    heard that my client cannot view those sections of the page
    in her
    Contribute either.
    The page is here:
    http://www.craft-design.ns.ca
    Any help would be gratefully received.
    Thanks
    Ellie

    > (I find it strange that it is now like this, as I
    understood that th was
    > depracated? So I went through and removed them all.)
    <th> deprecated? Certainly not.
    > There are editable regions in the page as it has been
    working for the past
    > year and a half. I find that after an amount of editing
    by Contribute
    > users, the pages do tend to fall apart.
    Normal template files have two editable regions in the head
    of the page -
    doctitle, and head
    The one you linked does not.
    That's what I was talking about.
    > Contribute sounds a great thing, but is a huge pain and
    ends up costing me
    > money fixing the messes my clients end up making, though
    this should not
    > be possible...
    I have stopped recommending it to my clients.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Ellie" <[email protected]> wrote in message
    news:[email protected]...
    > Thanks Murray,
    >
    > I see all this.
    >
    > (I find it strange that it is now like this, as I
    understood that th was
    > depracated? So I went through and removed them all.)
    >
    > There are editable regions in the page as it has been
    working for the past
    > year and a half. I find that after an amount of editing
    by Contribute
    > users, the pages do tend to fall apart.
    >
    > I will have to remake the template and remake the page
    from that.
    >
    > Strange thing is it was working perfectly well before.
    >
    > Thanks for the help, Murray.
    >
    > Contribute sounds a great thing, but is a huge pain and
    ends up costing me
    > money fixing the messes my clients end up making, though
    this should not
    > be possible...
    >
    > Ellie
    >
    > Murray *ACE* wrote:
    >
    >> You have no editable regions in the head of that
    page - why is that?
    >>
    >> As for the display in DW, perhaps it's the 175
    validation errors that the
    >> W3C validator finds on the page?
    >>
    >>
    http://validator.w3.org/check?verbose=1&uri=http://www.craft-design.ns.ca/mbg_past_shows.h tml
    >>
    >> Most of these are serious coding problems....
    >>
    >

  • Is there a way to load embedded html as you scroll down the page?

    I'm embedding chart.js charts into a muse site and they animate in as soon as they are loaded. What I'd like to do if possible is have each graph animate on as you scroll down the page in a parallax scrolling manner. Is it possible to trigger the code to load not at the same time as the page but instead by using a scrolling effect trigger?

    You may try the suggestion mentioned here :
    http://stackoverflow.com/questions/21474678/scrolltop-animation-without-jquery
    Thanks,
    Sanjit

  • I use high contrast mode (am visually impaired); just upgraded to 8.0. When I open a new tab, the background does not high contrast, showing white until the page loads. Is there a setting that can be adjusted to fix this, or is this permanent?

    I use Windows Vista, and I use the default Alt+Shift+PrtScn high contrast mode for white text on a black background. I only notice when I click a link that opens a new tab or open a tab via the mouse wheel that becomes the main tab. I can't switch tabs fast enough if I click a link that doesn't open as the main tab to tell if the problem persists. The duration of the non-high contrast background is only as long as the page takes to load. There does not seem to be much lag, but the lack of high contrast is painful enough that I have to close my eyes, so I'm not sure. On a related note, the new status information does not high contrast either, making it impossible for me to read.

    '''I fixed mine by removing the Ask.com extension.'''
    Tools
    Add-ons
    Settings icon
    View Recent Updates
    Ask.com '''DISABLE'''
    Running FF 8.0 on Windows 7 (64-bit)

  • Tree doesn't show up in the page (apex 4.0.2.00.07)

    Hi,
    I have created a tree region in the page in my application on apex.oraclecorp.com(apex 4.0.2.00.07), the query itself works well in the "SQL Commands", but the tree does NOT display in the page at all. Any comments will be very much appreciated.
    The result of the query in "SQL Commands" is as below:
    STATUS      TITLE      ICON      VALUE      TOOLTIP      LINK
    1      Event Docs      -      Event Docs      Event Docs      -
    -1      2011      -      2011      2011      -
    -1      test event 01      -      test event 01      test event 01      -
    0      test_pdf.pdf      -      test_pdf.pdf      test_pdf.pdf      -
    0      test_xls.xls      -      test_xls.xls      test_xls.xls      -
    0      test_xls.zip      -      test_xls.zip      test_xls.zip      -
    And the query is like below:
    with v as
    ( select d.ATTACH_FILENAME name, e.event_name parent, d.doc attr
    from rw_docs d,
    rw_int_event_doc ied,
    rw_events e
    where d.doc_id=ied.doc_id
    and ied.event_id=e.event_id
    union all
    select e.event_name name, to_char(extract(year from e.start_time)) parent, null attr
    from rw_events e
    union all
    select to_char(extract(year from e.start_time)) name, 'Event Docs' parent, null attr
    from rw_events e
    union all
    select 'Event Docs' name, null parent, null attr
    from dual)
    select case when connect_by_isleaf = 1 then 0 when level = 1 then 1 else -1 end as status,
    name as title,
    NULL as icon,
    name as value,
    name as tooltip,
    NULL as link
    from v
    start with parent is null
    connect by prior name = parent
    order siblings by name

    check the DB version compatibility with apex 4 or your DB version to apex 4.0 support for upgrade!
    Oracle Application Express Installation Requirements for 4.0

  • Neither the Counter nor the Email Me shows up on the page when I click them

    Whereas earlier I was able to insert a counter and an "Email me" on my pages, I no longer can. I click either one and nothing shows up on my screen, neither in the text area nor in the footer (the boundaries of which I cannot see but which I have nonetheless set to be about 100 pixels).
    What should I be doing to get those two items to show up when I click to insert them?
    — Lorna in Southern California

    Hi Lorna,
    The fact that you cannot select to Insert the counter and Email me buttons on your page indicates that those two items already exist somewhere on your page. They are most likely covered up by some other item, and it is your job to find them! Make sure that "Show Layout" is selected from the "View" menu. You can try to do a "Select All" Apple-A to see if you see any obscured adjustment handles.
    Finally, make sure to open up the Content Height value of your page and/or the Footer height. Just increase the values of both to see if the items are being obscured...most likely your footer is obscuring the items because the items are placed in the body by default and your Content Height value is set to short. Increase the Content Height until you start to see the boundary for the Footer start moving south on the screen. See if you buttons appear under there.
    I usually save adjusting the Footer and Content Height and stuff like that for the very last thing I do to a page.

  • Generate a HTML POST url and open the page.

    Hello,
    I need to generate a HTML POST url with 4 parameters.
    I tried like this.
    String URLtobeOpened = "<url>?param1=val1&param2=val2&param3=val3&param4=val4";
              HttpServletResponse resp = request.getServletResponse(true);
              try {
                   resp. sendRedirect(URLtobeOpened);
              } catch (IOException e1) {
                   // TODO Auto-generated catch block
                   e1.printStackTrace();
    This is showing me a login prompt, instead of directly logging me in.
    Also when I checked using HTTPWatch, the request is showing as a GET, but I need it as a POST.
    How to code it in the right way.
    Thanks
    Srinivas

    Here is what I tried sofar
    I am using this jar commons-httpclient-3.1.jar
    import org.apache.commons.httpclient.HttpClient;
    import org.apache.commons.httpclient.methods.PostMethod;
              String url = "https://www.independentinc.com/scripts/insupport.exe/db_connect";
                try {
                 HttpClient client = new HttpClient();
                 PostMethod method = new PostMethod( url );
                   // Configure the form parameters
                   method.addParameter( "param1", "val1" );
                   method.addParameter( "param2", "val2" );
                   method.addParameter( "param3", "val3" );
                   method.addParameter( "param4", "val4" );
                   // Execute the POST method
                 int statusCode = client.executeMethod( method );
                 if( statusCode != -1 ) {
                    String contents = method.getResponseBodyAsString();
                    method.releaseConnection();
    //                System.out.println( contents );
                catch( Exception e ) {
                 e.printStackTrace();
                }I am getting a weird exception
    java.lang.NoClassDefFoundError: org/apache/commons/logging/LogFactory at
    HttpClient client = new HttpClient();How to fix this exception...
    Is this the right approach at all...

Maybe you are looking for