Html view is not visible

Hi Guys
i am calling a webtemplate from vc by using html view
but the contents of html view is not visible in the application but html view window is opening but blank screen when i am trying this link direct in internet explorer its opening even www.google.com is not working from the application.
after changing my compiler to flex2 compiler i am getting this problem
Regards
Amiya

Hi Govindu
Thanks
actualy i am using some guard condition in my html view if i am removing it then its displaying
in flex2 compiler and some custom drop down events also working strangely in flex2 which is working properly in flash its realy strange
can u please explain what are all fixes we can do in order to solve this issue we have also raised oss message regarding this
Regards
Amiya

Similar Messages

BPM worklist app views are not visible in IPM task viewer

Hi,
we upgraded our system from 11.1.1.3.0 to
weblogic 10.3.5.0
SOA 11.1.1.5.0 with BPEL processes
ECM with IPM and UCM 11.1.1.5.0
after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
Thanks a lot in advance for any help
Edited by: 914063 on Jun 20, 2012 12:56 PM
Edited by: 914063 on Jun 20, 2012 12:57 PM

Hi Renuka,
There are basically two ways to create an ADF UI for a BPM Task:
1. Generate it from the task
2. Create a ADF Taskflow based on Human Workflow Task
Since I tell this by heart, I might be slightly wrong in the terms.
You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
Regards,
Martien

Trellis view is not visible

Hi,
Trellis view is not visible on answers. I'm using 11.1.1.6.0 version.

Hi,
Trellis Views avilable obiee11.1.1.6.2 BP and above version only. try to upgrade your version obiee11.1.1.6.0 to 6.2BP
Note: latest patch is present obiee11.1.1.6.7 BP (downloaded from My oracle support). and
Trellis Views is new Features for 11.1.1.6.2 BP version.
Refer more for "New Features for 11.1.1.6.2" section.
http://docs.oracle.com/cd/E23943_01/bi.1111/e10544/whatsnew.htm#CHDEGFAC
Thanks
Deva

Sales area data view is not visible

Hi All,
the salea area data view is not visible for all BP roles in BP master data
please help me how can i need to put in a visible

hi
sales area data tab is not visible for each and every BP role,
it is visible for sold to party,ship to party roles,
there is aview associated with this role that is CRM 000
if you want to have sales area data tab visible in the role like BP general you have to assign this view to your role
but i should make you one thing very clear that sales area data tab is meant for the customer who has purchased the order and final order has been given and within this tab you have each and every info regarding the sales office,sales group etc that where the order is to be delieverd or purchased from,
once a final order is given it can be sold to party role,ship to party role or bill payable role ,u urself tell in the role of customer how can u see the sales info if the customer hasnt purchased the order ,
likewise the consumer role also has sales data info so sales area data tab is visible in this role too
hope it clears all your doubt,
in case of any doubt do revert back
best regards
ashish

Export To HTML Images are not visible

Hi All,
I have an VS 2003 application and Crystal Reports 10.
My windows services generates the Crystal Reports and export them to Disk. I my Web Application i have to list all the exported reports.
Everything works file but when i view HTML exported report from my .aspx page, images are not visible on the page.
Can anybody has the same issue?
Thanks in advance

Do you have crystalreportviewers10 directory ptoperly configued in your IIS?

Graph which should display the data of a view object not visible

Hi,
I have a main page which contains a <af:panelAccordion> component with three <af:showDetailItem> components. Each of these <af:showDetailItem> components contain a page fragment. In each of these page fragments are a <af:table>, <dvt:pieGraph>, <dvt:lineGraph> and a <dvt:areaGraph> which represent data of view objects.
In the first <af:showDetailItem> window all components are visible. But when I click on another <af:showDetailItem> all components are visible except the <dvt:areaGraph>. Weird is when I insert a <af:commandLink> into the page fragment without any functions. Also the link doesn't invoke any mehtod and partial submit is set to false. Now when I click on this link the <dvt:areaGraph> with its data become visible and show the data.
The area graph and the line graph have partial triggers set to the table. Because when another row in the table is selected, the area and line graph should show data which is dependent on the selected row of the table.
Has anybody an idea?
Thanks in advance!
Edited by: user13061309 on 27.07.2010 06:53

Hi Frank,
thanks for your response.
I created a fragment-based flow and dragged it onto the main page as a region component. The main page contains the panelAccordian with its showDetailItem's. Each of the showDetailItem components of the panelAccordian contain such a region component.
Now I set the partial trigger's property of the region component pointing to the showDetailItem component which contains the region but nothing changed. The graph is still not visible at the first click on the detailItem. I also set the trigger's property of the region component pointing to the panelAccordian but also nothing happens.
Regards
Michael
Edited by: user13061309 on 06.08.2010 03:00

The internal html viewer is not working in coldfusion builder 2.

It is so frustrating how hard this is. I finished setting up coldfusion and coldfusion builder 2 with an apache local webserver and was hoping to make use of the internal html viewer but it won't come on! All I see is a blank grey page with no content. After creeping around the forums for a while it seemed that the simplest solution was to use the internal coldfusion server so I uninstalled everything and did just that, reverting my administrator page to http://localhost:8500/CFIDE/administrator/index.cfm (working and launchable from the IDE), placing my webroot at C:\ColdFusion9\wwwroot and with all the folders in their right place. The server is running ok and when I launch the run as "coldfusion administrator" option to run my index file, it succesfully opens the external browser and displays the page.
I have the same setup on my desktop at home, the same files, installation, everything! and it works but not on my laptop. I followed Ben Forta's instructions to a T and yet I still am not getting the html preview. I even tried to hard code the absolute url in the html preview settings and still nothing but that annoying grey.
Is this a bug? There doesn't seem to be anything about it in the bug reports. It is quite infuriating how something that seems so miniscule could be such an annoyance. I have already gotten quite used to the preview pages and coldfusion and I would prefer to code that way rather than making use of dreamweaver which I feel I am being forced to use, but at least it's consistent.
Please if anyone could provide some answers and help I would really appreciate it! I have only so much hair left!
Thanks!

Perhaps others may recognize and resolve this for you. I and others here often can and do offer quick solutions to many problems. And I can appreciate that it’s reasonable to think that something so simple should just work. But in this case I think are simply too many variables that could explain why things are not working for you. And while I can also appreciate that you will prefer to get a solution for free if anyone can offer it, I just can’t even begin to offer all the possible problems and solutions, at least by email, in this case. Again, maybe someone else will make a quick connection.
But I will point out that if you’re willing to pay US$75, I offer a service of remotely troubleshooting any one CFBuilder problem for that fixed price. Hopefully I might help you solve it quickly (when I can see exactly what’s going on in your environment), but you will not pay if I don’t solve the problem in up to 2 hours effort. If you may be interested, see www.carehart.org/consulting/ for more, and if you want to set up a time to get together (over the web), drop me an email at [email protected]
Finally, please note that I don’t often point out this service here on the forums. I generally just offer suggestions (sometimes lengthy ones) without any commercial expectation, so please don’t regard this as me engaging in “abusive unsolicited commercial email”. I’m just offering a possible solution, given the OPs sincere challenge in solving things.
/charlie

HTML view does not load first time?

All,
I have two HTML views on my Visual Composer model which both have 'Start' connectors going into them with the URL's defined (and correct), but when the page first loads the HTML views just show as gray boxes.
To get the HTML views to display the user needs to refresh the page then they appear!?
Has anyone also experienced this? If so how did you resolve this problem, because this is unacceptable to the user?
Thanks
Conrad

Hi Antonio,
thanks for your reply.
The problem that we seem to be having now is that 90% of the time the html views load but some times they don't, they just remain as gray boxes.
I tried the simple demo that you suggested and it worked for me also, but as i said the problem only sometimes occurs.
It maybe as you said a problem because i have lots of epcm events flying about and JavaScripts.
I will try and get a consistent failure, take it from there and keep you posted.
Thanks
Conrad

Dynamically changed view within a IFrame object in HTML page is not visible in UI Automation tree

Hi,
I have a webpage where are are some links in the top of the page. Then there is a IFrame. When the web page is hit, it opens with a default page in the IFrame. Clicking on each link will load a page in the IFrame alone.
The UI Automation tree detects the controls in the IFrame when application is opened in a new IE page.
I tried to navigate to a new page by clicking on a link and iframe was loaded with the new page.
Then navigating to the iframe in the UI Automation tree i was just able to see a ControlType.Custom control and not able to navigate beyond further.
Note: I just work on the client side and don't have access to the server or the application code.
Any help would be greatly appreciated.

Adobe Bugbase: Bug 3823839 Incorrect functionality of embed tag in html loader for adobe air development

Crystal HTML viewer will not show embedded image from Infoview image store

I am having an issue with the html and dhtml viewers not showing an image I have embedded inside a crystal report. The image has been stored in infoview and embedded into the report from that source. Using the Crystal ActiveX viewer works fine in this case and shows the image. The html viewers however show the blank box with the red X in the top left corner when Internet explorer can't find an image.
Now, if I right click on the image and get it's properties I get this URL:
http://vsx2af0x/crystalreportviewers115/imagehandlerdotnetbridge.aspx?dynamicimage={B8FDE586-08D3-4A14-896C-0FE19AC3DB90}.png
If I take that url and try to load it directly through Internet explorer I get the following error:
Exception of type 'System.OutOfMemoryException' was thrown.
The file is small and only about 20k in size. If someone can help that would be greatly appreciated.
Thanks

Unfortunately I have been unable to remove the plug-in. The files is not locked, or shared, but my operating systems thinks it is.
What happens, when you try?
When I try to delete the plug-in from
/Library/Application Support/Aperture/Plug-Ins/Google/Analog Efex Pro/
with ⌘⌫, I simply get the pop-up panel to enter my administrator password, and the plug-in will be moved to the Trash:
Don't forget to quit Aperture, before trying to remove the plug-in and to log off and on.

Text from Design view is not visible on View

I converted a project from RoboHelp 9 to 11, and discovered that several of my topics were changed. Most of the changes were minor, e.g. spacing, bold type, bullets, etc., but I'm still having to go through each page, to make corrections. Oftentimes, the "problems" don't show up until I View the topic, but up to this point I've been able to fix them. However, one topic looks fine in Design view, but when I open it in View, almost all of the text is gone. I've tried retyping portions, to see if it reappeared, but not all of it does. Do you have any idea what is happening and how I fix it?

LOL, you should probably check out my dear friend Peter Grainge's site
RoboHelp Tour
Here's the deal. In times past, the eHelp corporation had RoboHelp. And they created RoboHelp HTML long before HTML really was wildly popular. In those times it was necessary to implement some rather arcane workarounds to allow editing and a WYSIWYG environment.
Time moves forward and Adobe are now the owners of the venerable RoboHelp. They modified the editor to be more standards compliant. And as you might imagine, that has the real possibility of somewhat munging things. Not that RoboHelp is munging code, but browsers are now a bit more persnickety about things. For example, that transparent thing was likely there in earlier browser versions and was ignored. So it's a combination of things.
Cheers... Rick

[SOLVED] New attributes in View Object not visible in pageDef

Hi,
I'm having a View Object whererin I create new attributes. The problem is that the newly created attributes are not available for selection in a table binding in the page definition.
It seems like there is still somewhere a reference to the 'old' collection of attributes of the View Object. Is there a way to force an update?
The .xml file of the View seems to have the correct query containing the new attributes. Altough, when I try to edit the table binding in the pageDefinition, the attributes are not available in the 'Available Attributes' frame.
Thanks,
Koen Verhulst
edit: solved
Edited by: Koen Verhulst on Mar 5, 2009 8:47 AM

Hi Chetan,
I am now able to add a new tab after adding a new entry with the Main View name in "Assign Access levels to Incident Tabs" in transaction SPRO.
However, I am now facing a new issue when I add a main view in OIF component. There are 12 main views in the Object Instance Schema with ID's MainView<sequencenumber> as shown below.
But when I add a new main view I am getting the ID with the format MainVIew<sequencenumber_hexadecimalvalues> and also I am able to edit the ID value which is not enabled for other main views as shown below.
The problem with this hexadecimal value is that every time a change is done and I save the configuration, the number changes and this is causing problem as the configuration in SPRO does not match and the new tab becomes invisible.
Please could you let me know what could be the reason and how to rectify this?
Regards,
Poojith M V

Part of View menu not visible

Working with a newly installed version of Pages'08, I noticed that part of the view menu is ... well, not there. View ends with "Show Invisibles" and nothing further. Normally "Zoom..." and "Show Inspector" and a bunch of others should show up, but there is nothing there. Without having actually done a precise comparison (the two computers are pretty far apart...) the other menus seem OK.
Any ideas where this could come from, and how to remedy it?

It may be a problem of corrupt preferences. Go to HD > Users > (your account) > Library > Preferences & delete the com.apple.iwork.pages.plist & restart Pages. Deleting the preference file & forcing the application to build a new, clean file is a simple first step in troubleshooting a misbehaving application.

View not visible

Hi Gurus,
I have a requirement wherein i have to use component BP_DATA/IDNumberWindow in the component ICCMP_BP_DETAIL. Here are the steps I followed:
1. Add a component usage for BP_DATA/IDNumberWindow in component ICCMP_BP_DETAIL.
2.Assigned this to VS BuPaMoreCustomerVS after creating a new view area.
3.Redefined the component controller's WD_USAGE_METHOD to do context node binding.
4.Redefine the htm page of viewset to display the embedded view.
5.Redefined the set_context_viewgroup method of view embedded.
But when I go to UI this view is not visible. Please help.
Thanks.

Hi.
in component ICCMP_BP_DETAIL component CreateW window is the default window which does not hv viewset View ICCMP_BP_DETAIL/BuPaMoreCustomerVS .
Ensure that when chking in UI either MoreWindow is being diplayed or else add ur view to viewset ICCMP_BP_DETAIL/BuPaCreateVS .
Rgds,
Swati.

Views not visible

Hi,
We created a Procurement Catalog and created views under it, defined the integrated call structure and also assigned views to roles.
But despite that when we click on the Procurement Catalog we are unable to view the "View".
System details.
CCM 2.0
SRM 5.0
EBP 5.5
Kindly reply at the earliest.
Thanks,
Swetha

Vishal,
Are you able to crack the issue, as even we are not able to see the view defined in our Master Catalog?
Views have been correctly defined with proper assignment to roles.
They are very much active with assigned items and the master catalog has also been republished. But still views are not visible while creating shopping cart from Catalog.
We are working on SRM 5.5 and SP pack level 9.
Regards,
Sandeep

Html view is not visible

Similar Messages

Maybe you are looking for