HTTP and RFC Adapter are not Required Sender

Hi All,
I have one dought....
Why Plain HTTP and RFC Adapter are not Required Sender Communication Channel and Sender Agreements...
I Know this two Adapter are in ABAP Stack....
Please clarify my dought...
Regards

Idoc Adapters do NOT require Sender Communication Channel.
The Sender System identifies itself at the Integration Server, with the fields SNDPOR and Client of the Control Record.
Sender Communication channels are used for communication betweeen the Application System and the Integration Server.
In the case of Idocs, all idocs are tranferred to the Integration Server pipeline and NOT to the regular EDI/IDOC interface.
The RECEVIER DETERMINATION is based on the values in the Control Record.
If you are doing ALE, then you have to maintain the idoc types which are NOT to be transferred to the Integration server by executing report IDX_SELECT_IDOCTYP_WITHOUT_IS.
By maintaining the Idoc Types using this report, only these idoc types are sent to the regular EDI/IDOC interface.

Similar Messages

RFC Sender problem between 46D and RFC adapter

Hi,
I have this simple integration scenario where I want to send data to a archiving system;
SAP -> (tRFC) -> XI -> (MQ) -> BizTalk -> (MQ) Arch.syst.
SAP side ***
A Z-program using a Z func. like;
    CALL FUNCTION 'ZSD_DCF_SEND_TAG'
      IN BACKGROUND TASK
      DESTINATION 'XISYSTEM_TRFC_DCF'
      EXPORTING
        pt_filing_info = gt_filing.
    COMMIT WORK AND WAIT.
XI side ***
Both IR and ID is configured correctly, in the development environment everything works just great. I have created a test program where I can define how many calls I will do, looping over the func. call with a commit inside the loop - 500 or more msgs are ok.
The integration scenario is transported to quality enviroment using CMS, and the RFC sender comm.ch. is configured accordingly.
The problem in quality ***
When sending just 1 msg, everything is just fine, message received and delivered to MQ.
When sending >= 2 msgs, the 1 msg is always ok, BUT all others fails due to the following from Adapter monitor;
RFC_HISTORY
- Error: 2006-01-19 10:55:18 CET: com.sap.aii.af.rfc.afcommunication.RfcAFWException: lookup of alternativeServiceIdentifier via CPA-cache failed for channel 'RFCSender_XI0002' (02d4d30de3593874942ed0659add0827, party '', schema 'TechnicalSystem', identifier 'Q93#120')
- OK: 2006-01-19 10:55:17 CET: Message processed for interface ZSD_DCF_SEND_TAG
My sending system is Q93 CLI 505 so I can understand the error, BUT I cannot understand why the RFC adapter is saying the TechnicalSystem is Q93#120 - it should be Q93#505. My Q XI has client 120...
It seems to me that the RFC adapter is kind of confused about the sender..
I have created a OSS message and SAP has looged on and looked into it with both a XI expert and RFC expert without being able to answer - all is configured correctly.
- The SLD config. for bus.system Q93 is ok -
- The bus.system in ID is showing correct vaues for
Adapter Specific Identifiers (SID Q93, client 505)
- Both Dev. and Qual. environment are running on XI 3.0 SP 14 latest patch, RFC component version on the SAP side is identical between dev. and qual. SAP systems
- It doesn't matter which gw I use (Q93 gw or XI gw), the error is persistent
- It doesn't matter if I increase initial conn, max conn.
I have also tried to use qRFC instead, but with the same result.
Anyone using tRFC for asynch. communication from SAP to XI seeing something similar?
Meanwhile, I will do RFC trace on GW and RFC Adapter on AE....
Please, do not say SP15, oss msg for FAQ RFC adapter or links to RFCAdapter config....
best regards
Torstein

Hi,
SAP Note 730870 FAQ: XI 3.0 RfcAdapter Q.no 15
<i>Q 15: Whats wrong when the error message "lookup of alternativeServiceIdentifier via CPA-cache failed" shows up while sending a RFC call to the RfcAdapter?
A: A RFC sender channel is located beneath a service within the Integration Directory. Within this service choose "Service" -> "Adapter-Specific Identifiers". The values in the fields "R/3 System ID" and "Client" has to be maintained with the correct values of the system, that sends the RFC call to the RfcAdapter. It normaly only makes sense to have these values filled for services of type "Business System". If maintained in SLD, this fields will be filled automaticaly for services of type "Business System" and can be updated with the button "Compare with System Landscape Directory".</i>
- Give correct appserver and gateway service details in XI.
- Open the service holding the RFC adapter you are trying to use. On the top menu, goto Service -> Adapter Specific Identifiers..
Regards,
Prateek

Soap Sender and RFC Adapter receiver getting APPLICATION_ERROR

Hi, all,
I have a webservice soap sender and RFC Adapter receiver scenario, it works fine with RFC "RFC_SYSTEM_INFO", When i tried the RFC "RFC_READ_TABLE", getting the following error message, <SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code> in
SXI_MONITOR, in webservice client, i am getting error message like this:
<faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <rfc:ZZTEST_RFC_READ_TABLE.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
               <Name>TABLE_NOT_AVAILABLE</Name>
               <Text>QUERY_TABLE not active in Dictionary</Text>
            </rfc:ZZTEST_RFC_READ_TABLE.Exception>
Thanks a lot!

Hi
Its not compulsory but its good to wrap it as Z object.
Well if you are facing problem with SOAP data. Then try to do one thing. Check with the data you received from SOAP message. If this works
Then try to check in mapping is it passing the data correctly or not. With this check with the user authorization PIAPPLUSER. if its having less authorizations to execute this BAPI in ECC
Thanks
Gaurav

I was using my bros account for icloud, he changed & forgot the pass now i want to sign out & put mine but i'm not able to do that and he couldnt recover bcz he did it long time ago and apple support are not sending a recovery email to his email?

i was using my bros account for icloud, he changed & forgot the pass now i want to sign out & put mine but i'm not able to do that and he couldnt recover bcz he did it long time ago and apple support are not sending a recovery email to his email... what shall i do now to sign out?

Tell him to contact the Apple account security team for his country and ask for assistance changing the password: http://support.apple.com/kb/HT5699. If his country isn't listed, he can try contacting iTunes store support by filling out this form: https://www.apple.com/emea/support/itunes/contact.html.

JDBC to File and RFC adapter

Hi All,
In my scenario, i am sending file from a database system to SAP system. Here I am using JDBC/ webserveices adapter at outbound side to query the database and FILE and RFC at inbound side to send file and workflow notification.
my requirement is to send file as batch to SAP system(after business hours), send workflow notiication to the responsible person, and when the file is stored on application server then only i should send the notification to the person.
I know this can be acheived by BPM by using wait step but I am not sure how to do it only for RFC adapter to kick the notification once the file has stored and confirmed.
Can anyone help me in this issue.
Reg
Sre.

>
sre wrote:
> Hi All,
>
> In my scenario, i am sending file from a database system to SAP system. Here I am using JDBC/ webserveices adapter at outbound side to query the database and FILE and RFC at inbound side to send file and workflow notification.
> my requirement is to send file as batch to SAP system(after business hours), send workflow notiication to the responsible person, and when the file is stored on application server then only i should send the notification to the person.
>
> I know this can be acheived by BPM by using wait step but I am not sure how to do it only for RFC adapter to kick the notification once the file has stored and confirmed.
>
> Can anyone help me in this issue.
>
> Reg
> Sre.
There are two options,
1. With BPM you can have the send step for file request an acknowledgment and then have the send step for the RFC call after the previous file send step.
2. Without BPM, use the same Business system (single receiver det.) and have multiple interface determination (file&RFC). Use the option maintain order at runtime and have the file interface above the RFC. This will act like an EOIO.

How to use IDOC and RFC adapter in 1 scenario?

We have AAA field and BBB field and we want to send AAA field to receiver sap system using IDOC adapter and BBB field to receiver sap system using RFC adapter. But how to use IDOC and RFC adapter in 1 scenario and how to map and what are the design and configuration objects we require to create?

To achieve this you have to use
Two Interface Determinations
Two Communication Channels (IDOC & RFC)
& Two Receiver Aggrements.
Use the Enhanced Interface determination and give your conditions there. Based on you condition your interface mapping will be triggered and data will be sent to IDOC & RFC respectively.

I started a creative cloud student membership but Premiere Pro and After Effects are not in the app

I started a creative cloud student membership but Premiere Pro and After Effects are not in the app and won't download from the adobe website, all that happens is that the creative cloud app opens and sends me to the list of programs available for download which still do not contain Premiere Pro and After Effects

Premiere Pro and After Effects are 64 bit only apps.
They require a 64 bit computer and a 64 bit operating system.
If you're running Windows 7 32 bit or Windows 8 32 bit then you will not be able to download, install or run Premiere Pro or After Effects.
See http://www.adobe.com/products/creativecloud/faq.html#desktop-products
Which desktop applications in Creative Cloud require 64-bit operating systems?
With the new CC apps, most of the pro video and audio applications now require 64-bit operating systems to run. These native 64-bit applications include Adobe Premiere® Pro CC, Adobe Audition® CC, After Effects® CC, Prelude® CC, and SpeedGrade® CC. Flash Professional CC, Photoshop CC and Lightroom® also require 64-bit on Mac OS.

"Validation" enabled for the composite and my testsuites are not working

I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
then it works and the process will be completed.
But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.

Hello there, RevDebMN.
The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Particularly useful, in your case:
Mail Connection Doctor shows one or more red dots () in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
What alert message is shown in the Mail Connection Doctor "Details" column affected account?
Click here if a "Could not connect to this (server type) server…" message appears
Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
If the issue persists, then you'll want to remove the account and then add it again using this article:
Mail (Mountain Lion): Remove accounts
http://support.apple.com/kb/PH11794
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

In iOS 7.0.2 All and Missed tabs are not showing call history correctly

In iOS 7.0.2 All and Missed tabs are not showing call history correctly, I have iPhone 4 running iOS 7.0.2 version it looks like there is a bug. Missed call history and All calls (incoming, outgoing and missed) history is not showing properly in a list. Ideally when I click on missed it should show me recent missed call list and when I click on All it should show me (incoming, outgoing and missed) calls list sorted by current date and time.
I would like to request Apple developer team to look into this and fix this bug asap. Thanks in advance.

Hello gnutellabrot
Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

The product version and database version are not compatible

The following simple program gets an exception {The product version and database version are not compatible} its very hard to proceed from here. Does anybody know what cause this?
Best Regards
Jan Isacsson
using System.Collections.ObjectModel;
using Microsoft.MasterDataServices.Deployment;
using Microsoft.MasterDataServices.Services.DataContracts;
namespace MdsDeploy
    class Program
        static void Main(string[] args)
            try
                ModelReader reader = new ModelReader();
                Collection<Identifier> models = reader.GetModels();
                foreach (Identifier modelId in models)
                    Console.WriteLine(modelId.Name);
            catch (System.Exception ex)
                Console.WriteLine("Error: " + ex.Message);
            Console.ReadKey();

Hi Jan,
For the error "The product version and database version are not compatible", as Emma said, the version number of the Service does not match the database schema version.
In your scenario, which version of database are you using? Please note that MDS update required after SQL 2012 SP1 installation, please refer to the links below to see the details.
http://byobi.com/blog/2012/11/mds-update-required-after-sql-2012-sp1-installation/
http://msdn.microsoft.com/en-IN/library/gg488708.aspx
Regards,
Charlie Liao
TechNet Community Support

HTTP and RFC related scenarios

Hi
Can you give HTTP and RFC related scenario links ?
Urgent pls
Thanks,
Message was edited by:
s s

Hi s s,
see the below links, they will help u.
HTTP to RFC
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983752,00.html
http://help.sap.com/saphelp_nw04/helpdata/en/f6/e002416225f023e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
Is it possible to use the RFC sender adapter for asynchronous calls? Async call
<a href="http://File to RFC using BPM-Starter Kit: By Arpit Seth">File to RFC using BPM-Starter Kit: By Arpit Seth</a>
regards
sreeni

Testing of HTTP and RFC adapters

Hi SAP guru,
Can u please help me in knowing that how we can test HTTP and RFC adapters in any scenarios.
Thanks & Regards
Vijaya

hi,
Testing RFC connection
http://www.riyaz.net/blog/index.php/2008/02/06/understanding-the-rfc-adapter/
You can test if HTTP adapter is working fine or not as mentioned below.
1. test the adapter_plain service in TCODE SICF
adapter_plain service can be found under /default_host/sap/xi/adapter_plain
or
2. TCODE : SMICM and then Shift + F1 and you can see the status of the HTTP server
Regards
joel

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?

I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again !

T/F: iPhone users are not required to pay $15/month extra for Good Technology

I have a personal Droid RAZR M. You may wonder why I am posting in the iPhone forum but you are about to find out.
I have access to corporate e-mail via Good Technology. When I got this service set up at the same time I acquired the phone, I was required to upgrade from a $30/month 2GB plan to a $45/month 2GB plan just to have this access ("needed for access to company servers"). That was a surprise but I got over it. However, since then, I have come to learn the following:
1. It appears that other than VZW, no other carriers are charging users extra for access to Good Technology.
2. Based on a colleague's information from a Good Technology support engineer and a office mate who is using a VZW iPhone, VZW iPhone users are *not* *required* to move to an Enterprise plan aren't paying an extra $15/month. If one searches the Internet, I am not the only one asking about this.
If you are using a Verizon Wireless iPhone and have Good Technology on your phone, would you let me know if were *required* to upgrade your data plan and pay extra just for using Good Technology?
Thanks,
Techvet

I need to check some information at work about this, since they have some guidance on how their employees can connect to their corporate email with android and iphone devices.

HTTP and RFC Adapter are not Required Sender

Similar Messages

Maybe you are looking for