HTTP Debugging

Hi
Is there a way to use Safari for debugging HTTP requests? ie. display all the request and response headers
Thanks

Basically I want to be able to see the request thats generated when I open a page, eg
GET / HTTP/1.1[CRLF]
Host: www.apple.com[CRLF]
Connection: close[CRLF]
Accept-Encoding: gzip[CRLF]
Accept: /[CRLF]
Accept-Language: en[CRLF]
User-Agent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/417.9 (KHTML, like Gecko) Safari/417.9.2 Web-Sniffer/1.0.24[CRLF]
Referer: http://web-sniffer.net/[CRLF]
and then I want to see the corresponding response that follows

Similar Messages

HTTP debugging with the new debugger?

Hi,
I was happy when I saw the features of the new ABAP debugger and lost my enthusiasm when I tried HTTP debugging.
Is there anything planned to enable new HTTP debugging?
Thanks & best regards,
Florian

Hi Florian,
I agree that it should now be possible. I saw this on a SAP Java Development Day at the start of '04 when NetWeaver 04 was launched.
I saw it being used in the NetWeaver Development Studio.
It seemed very clever indeed. You could debug the Java code then jump to the ABAP debugger when the BAPI is called then jump back into the Java code when the BAPI call is completed. It seemed to work very well and did not have any issues.
Hope this helps.
Kind regards
Colin.:)

Http debugging of page layout

hi all
I am able to do http debugging for onCreate event after that cursor move to layout page, but from here i am not able to further processing bloc like onInputprocessing or onInitialization bloc .
I have set the breakpoint also in respective event , but still cursor is not going the breakpoint .
Let me know how i can debug layout or how can i go to onInitialization or other event ?
Regards
Sunanda Mandavi
Message was edited by:
Sunanda Mandavi

Hi Sunanda,
Actually if you are trying to see just the cursor positions, then it may not move ahead in the layout part, as the debugger cannot debug JavaScript or HTML or HTMLB part....
If there is any abap code in the layout section, then it will gio further toi that point, else the cursor will seem to be on the same position....it however executes the code in background......
Hope this helps.
Do reward each useful answer..!
Thanks,
Tatvagna.

HTTP Debugging Layout

Hi,
I'm trying to debug the Layout of a sample BSP page from HTMLB_SAMPLES application. I've done the following: Utilities->breakpoints->Activate/Deacticate breakpoints and placed a breakpoint in the layout code. When I try to launch this BSP from the browser it actually is taking me to debugger but I cannot see any code . I mean the source code portion of debugger is empty. However, it works normal if I place HTTP breakpoint in any of the events. Can someone tell me what could I be missing that is preventing me from seeing Layout code in Debugger?

To get the actual code, do the following steps:
while debugging, on top of the window, you must be seeing the Main program name and followed with some kind of characters lik CL_O2781YETU9967TTBU4VVJFYMIMVCP. On the same Row, you must be seeing some ICON(XML Icon), Click that, it will show the actual code.
Let me know if you have anyissue on this..
* Reward each useful answer.
Raja T

Plain HTTP debugging / Monitoring

Hi,
I am developing an asynchronous scenario where I am sending XML Data using plain HTTP receiver communication channel using POST. Can anybody tell me How to monitor HTTP channels it is part of Integration Engine? Where can I see all the messages went through it? Whether it is delivered to Target system from XI or not etc? If any trouble then How do i know that?
Any help will be appreciated.
Thanks.
-Adrean.

hi,
check out this page for ICF (IE ) trace and how to turn it on
http://help.sap.com/saphelp_webas620/helpdata/en/2d/64d041e74911d6b2e400508b6b8a93/content.htm
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Debugging HTTP traffic from iPad with Charles

Here's a great tip on how to use Charles on your Mac or PC to proxy HTTP traffic from your iPad so you can debug it.
http://www.ravelrumba.com/blog/ipad-http-debugging/

Talking of debugging iPad, and Flash apps specifically, I only recently tried out the "Quick publishing for device debugging" option. When you do that, and run the app on the device, you can set Flash to be in a remote debugging session, and on the app screen you type in the IP address of your computer. You can then debug the running app in just the same way you would debug a swf running in your desktop browser. You don't even have to be connected by USB, it works across the wireless network.

Logging HTTP and/or SOAP packets in standalong OC4J v10.1.3.2

I'm running OC4J standalone v10.1.3.2 on RH5 linux. I'd like to know how to turn on logging so that all incoming HTTP data can be viewed.
I've basically got a Web Service which is failing to execute from some clients (but not all) due to a SOAP11 version mismatch problem. If I could see the incoming HTTP and/or SOAP request then I could determine where the inconsistency is coming from.
Here's an extract of the returned SOAP error:
<faultcode>env:VersionMismatch</faultcode>
<faultstring>Version Mismatch</faultstring>
<faultactor>http://schemas.xmlsoap.org/soap/actor/next</faultactor>
I've tried editing j2ee-logging.xml and set the logging level to FINEST and TRACE but it's still not logging out the HTTP traffic.
Any ideas welcomed,
Thanks

Andy,
Which log files are you looking at? There is a server.log that will be impacted when you set the logging level to FINEST. Since you want to look at http requests, have you considered using Fiddler on the client side? It's pretty verbose but you can see all sorts of info including data posted to forms.
-Michael
PS
URL:
http://www.oracle.com/technology/tech/java/oc4j/htdocs/oc4j-logging-debugging-technote.htmlTake a look at the "Debug Options in OC4J" section. There are several HTTP debugging options listed.
Edited by: Michael F. Hardy on Dec 17, 2008 9:40 AM

Issue in debugging

Hi All,
I am facing an issue in debugging a BSP application.
I placed an external break point in oncreate, oninitialization and oninputprocessing event but its not taking me to the break point.
I have even tried with having some BREAK-POINT hard coded , but it doesn't help.
I have tried with placing an external break point in layout and activated the HTTP debugging in SICF, even after that it doesn't work.
I have not set default user name password for the application in SICF and also my user id in the external debugging option of Utilities->ABAP editor -> debugging is same as the one which i am giving while executing the page.
But I am not able to debug the application.
But when I tried debugging some other BSP applications, I am able to do that.
your inputs will be very helpful.
Thanks in advance.

Hi Jyothi,
Login userid and Debugger user id should be the same. If not debugging will not call.
1) Have you given any user credintials while testing.
2) Have you checked the debug user : utilities-> settings-> debugging-> check the user.
Regards,
Eswar.

Relating debugging of program.

hi experts.
i want to learn
how to do debug of program.
how to use break point.
how to use watch.
how to debug selection-screen and module pool programming.
please help it is very urgent.
give some link also.

HI
    Debugger
The Debugger is a programming tool that you can use to execute ABAP programs, by line or by section. With this tool, you can display data objects and check the flow logic of programs.
Two types of debugging are currently possible: Debugging with the classic Debugger for release levels up to and including 6.40 or debugging with the new Debugger, which is available for all releases after 6.40. The main differences between the classic and the new ABAP Debuggers are described below:
·         The Classic ABAP Debugger runs in the same roll area as the application to be analyzed (debuggee). It is therefore displayed in the same window as the application. However, this technology also has some restrictions. For example, some ABAP programs (such as conversion exist) cannot be analyzed in debug mode for technical reasons. However, the most significant restriction is that no ABAP technology can be used for designing the Debugger interface and it is therefore not possible to create a modern user interface.
The New ABAP Debugger, on the other hand, is executed in a separate external session (Debugger), while the application to be analyzed (debuggee) uses a second external session. With this technology, the user interface of the Debugger can be designed freely by ABAP means.
The new Debugger provides the user with a flexible interface that can be configured as required and has more than eight desktops. Here it is possible to place and arrange up to four tools - depending on the user's selection. For example, it is possible to display source texts or structures. In this way, the user can design the Debugger interface according to his own individual requirements.
As of Release 6.40, you can select the debugging type as you wish by choosing the classic Debugger or the new Debugger in the ABAP Editor from the path Utilities ® Settings. It is also possible to switch the Debugger at any time during a session under the menu option Debugging.
As of Release 7.00, the new ABAP Debugger is the default.
Breakpoints
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
    Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
·        You can set up to five watchpoints in a program.
See also Setting Watchpoints.
·        You can also specify the conditions under which a watchpoint is to become active.
·        You can specify a logical link for up to five (conditional) watchpoints.
See also Specifying Logical Links.
·        You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
·        You can change and delete watchpoints.
See Changing Watchpoints
·        You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
REWARD IF HELPFUL
vivekanand

Debugging BSP page

I want to debug a bsp application (Z app), i am logged in remote desktop, ecc 6.0, internet explorer: 7
i have tried to test page directly from se80 and also from URL.
I have tried setting external break-point, activating debugging for user...............but no success to reach debugger and program does not stop at any of the break-point.
any guess on how do i get to debugger??

Hi Ankit,
Try HTTP debugging. Details to activate this are here - http://help.sap.com/SAPHELP_CRM70/helpdata/EN/17/00ab3b72d5df3be10000000a11402f/content.htm .
Hope this helps.
Bhavana.

Debugging in ecc6

hai i am using ecc6 and when i am going in debugging mode it is going into exclusive session even after prgram exectuion the debug session is on , is there any setting so that once the proram executed the debug session closes
thanx in advance
reagrds
afzal

Hi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC <> 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
< Less than
<=
Less than or equal
=
Equal
<>
Not equal
>= Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
Reward if usefull

Debugging BSP Pages

Hi,
We are upgrading from ECC 5.0 to 6.0.
The test environment is upgraded and after upgrade i am unable to do HTTP debugging for BSP pages.
is there any configuration settings that i have to change ?
Kindly Help
Regards
Bharath Mohan B

For ECC:
Before settings the break-point, you need to Active External break-point for HTTP. YOu can find this option in
SE80, in
Utilites--> External break-point-->Activate/Deactive for HTTP users
then it will ask you the user name, mention your user name. This will activate your HTTP break-point.
Then "Set External break-point (CtrlShiftF12).
This will solve your problem...
*Reward each useful answer
Raja T

Debug R/3 FM from Portal

Hi,
I have a FM(1) which is called from a FM(2), which is remotely enabled. This remotely enabled FM(2) is called from a portal application. I can not able to debug my FM(1). I enabled external debugging and kept a HTTP breakpoint. But not working. Any clues please let me know.
Thank you,
Surya.

Hi,
Check out below procedure,
To debug in the Web,pls refer the foll steps:
-->Goto transaction SICF.
-->Select service
-->Change service settings and insert parameter ~GENERATEDYNDPRO=1.
-->Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
-->Turn HTTP Debugging ON. Utilities-Settings-Debugging. Click Actv and username.
-->Add HTTP Breakpoint. Display source code and select Utilities-breakpoints-set.
On External Debugging select HTTP Breakpoint.
-->Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Regards,
Amit R

System debugging BSP application

Experts,
I set system debugging for my BSP application going thru SICF. I have external breakpoint set at do_init method of my controller class. If I execute the BSP from portal, it doesn't stop at the breakpoint in my controller class. Any help is appreciated.

Hi,
In the development workbench (Transaction SE80).
Choose Utilities -> Settings. On the following dialog box for the user-specific settings, on the tab ABAP Editor choose the embedded tabstrip HTTP Debugging and activate HTTP debugging globally for your user.
In the Web Application Builder of the development workbench, you can also activate or deactivate HTTP debugging:
Choose Utilities -> Breakpoints ®(De)activate for HTTP user.
Ensure that deleting all breakpoints does not automatically deactivate HTTP debugging.
Regards,
Azaz.

DEBUGGING F5 F6 F7 F8 ?

what is the difference between F5 F6 F7 F8 in DEBUGGING mode.please explain more elaborately.
thanks in advance.

Praveen,
Some additional info which can be quite helpful.
a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
· You can set up to five watchpoints in a program.
See also Setting Watchpoints.
· You can also specify the conditions under which a watchpoint is to become active.
· You can specify a logical link for up to five (conditional) watchpoints.
See also Specifying Logical Links.
· You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in
the specified program.
· You can change and delete watchpoints.
See Changing Watchpoints
· You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Breakpoints
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
· You do not have to change the program code.
· You can set them even when the program is locked by another programmer.
· You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
we can keep them at :
Statements
Subroutines
Function Module Calls
at Methods
System Exceptions
break point :
we can start debugging from that point or if we keep break point at some place we can directly got ot htat point using f6.
watch point: for example if we have to check the output for 4000 records based on a field value i.e.for vendor number 'in'we have to check then we will create watchpoint on field LIFNR value '2000'. then we can directly go to vendor whose numbe ris 2000

HTTP Debugging

Similar Messages

Maybe you are looking for