HTTP Receiver adpater configuration for Web Application server

Hello All,
I am trying to configure a HTTP scenario. I want to configue the receiver HTTP channel to connect to the WebApplication server installed locally.
I am able connect to the WebApplication server from by browser by giving the URL http://inld50037931a.dhcp.blrl.sap.corp:8080/hello/.
In my receiver HTTP channel i have configure as below
Target Host : inld50037931a.dhcp.blrl.sap.corp
Service Number : 8080
Path : /hello.
But it is failing in run time with error in SXMB_MONI : HTTP-Server Code 500 Reason Internal Server Error Explanation Unknown Host.
And i checked the Trace and it is looking for taget URL :
http://inld50037931a:8080/hello
instead of
http://inld50037931a.dhcp.blrl.sap.corp:8080/hello
Kindly help me in correcting the receiver channel configuraion.
Best Regards,
Biswa

Hi Babu,
The given links might help you:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
HTTP Receiver Adapter
Regards,
Ajay.

Similar Messages

  • Web load balancer for web application server

    Hi.
    We are planning to very large system (6,000 users) and They will use BSP application.
    So, We need web load balancing method.
    I think We have two choice : L4 switch or SAP Web Dispacther.
    Is there any recommendation for web load balancing method ?
    Which one is better for large user load balancing ?
    Regards, Arnold.

    Another good advantage of Web dispatcher is web based monitoring, SSL config etc.
    http://help.sap.com/saphelp_erp2004/helpdata/en/05/ac923fa5e93c17e10000000a114084/frameset.htm
    Regards,
    siddhesh

  • Can you install the Office Web Application Server on one of the App Servers for SharePoint 2013?

    Hi,
    Is it possible to run Office Web Application Server (shows preview images for docs and allows Notepad, Word, Excel to work etc) on one of the SharePoint 2013 App Servers. I don't want to have to create a new server. It talks about setting
    up a farm. 
    Better still how the feck do you switch this functionlity off - I always remember it being a pain in the arse. We accidentally ran the first part of the configuration on one of the SharePoint App Servers only to find out our subscription does not
    have this download (bar stewards changed this Nov 2014 - just after started contract).    
    Help would be much appreciated as close to go live
    Thanks.
    John.

    Hi John,
    Please reboot the server at the very beginning and test the issue again.
    Quote from you:
    Problem is I get Internet Web Page cannot display the webpage everytime I click in a excel document, powerpoint document, notebook link or the preview
    Please post the url in browser address here.
    If you just executed the command below:
    Add-WindowsFeature Web-Server,Web-Mgmt-Tools,Web-Mgmt-Console,Web-WebServer,Web-Common-Http,Web-Default-Doc,Web-Static-Content,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Security,Web-Filtering,Web-Windows-Auth,Web-App-Dev,Web-Net-Ext45,Web-Asp-Net45,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Includes,InkandHandwritingServices
    It just install some windows feature to the current server, we can find it should be done before installing several server products.
    Could you please verify if the command you executed is the same as the one above?
    You could also go to local disk and check if there is OfficeWebApps folder under C:\ProgramData\Microsoft\?
    If you check in Control Panel > Programs, is there any feature related to Office Web Apps?
    If you have confirmed there is no Office Web Apps feature installed, please go to SharePoint document library settings, and make the document to open in client, does it work?
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Configure Logical Address for Web Applications-Hyperion 11.1.2

    Hello,
    I have f5 load balancer infront of two foundation servers and I have not yet configured the Logical address for web applications with Loadbalancer DNS name/hostnmae. I can access all of web applications through Load Balanced URL. Do I Still need to configure Logical Web Address for web applications ?
    Thank you so much !

    To add to this part of the reason for load balancing is usually to support high availability (in addition to scalability). Without that logic address being setup you will find certain configuration items are pointed to one server or another and if that one server is brought down it impacts key functionality of the whole environment.
    You should consider a test of the infrastructure by purposely bringing down services and/or servers to ensure you still have a fully working environment with the other redundant components. This test may take half a day to several days to really go through a full regression test of key features while taking key pieces down.
    Regards,
    John A. Booth
    http://www.metavero.com

  • Configure Web Application Server

    Hi How I can configure web application server
    I'm geeting the pop up which require web application credential pls advice.
    I'm installing on my client desktop
    what should be the following information:
    port:
    username:
    passowrd:
    Server Instance:
    Virtual host:
    Service name:
    App server installation directory:
    I am installing the SAP Trial version and in that I am installing everything from the Custom option
    I have installed SAP BO Edge Trial and Crystal Reports 2008
    Can anyone please advise me what would be the parameters i need to insert as I have gone through the webblogs
    /people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
    but the details are not mentioned
    Regards
    JM

    thanks alot
    but for the trial version which SAP has provided there is no TOMCAT server in that
    and when i check my Central Configuration Manager there is just one service (Server Intelligence Agent) running and if I see the details like manage server then no service of TOMCAT is listed there
    Do i need to install TOMCAT separately bcoz my BusinessObject Edge Series server is working fine
    Please advise
    Regards
    JM

  • License Keys for J2EE-Engine_ORA SAP Web Application Server.

    Hi Experts
    I have installed SAP Net Weaver 04 support release 1 > oracle JAVA System. I don’t have ABAP system on same Hardware so I cant used SLICENSE GUI transaction code, how I generate hardware key, I am performing installation on Windows 2003 server.
    Now I want to add License Keys for J2EE-Engine_ORA SAP Web Application Server. So please give me producer for how to add license key.
    Regards,
    Rahul

    Hi
    Go to  Visual Administrator in the following path:
    <Your Server> -->  Services --> Licensing  Adapter to get the Hardware key , SID etc . Ten apply license in
    https://service.sap.com/licensekeys
    Once you get the license from SAP, do the following
    ->Download the license  file to a local disk
    --> Start the Visual Administrator  Server --> Services --> Licensing Adapter
    --> Use the Install License From File button to upload the file
    --> Select the file with the downloaded license key
    --> Choose Open to continue
    After installation restart J2EE engine
    Thanks
    Prince Jose

  • DB/System requirements for prototyping a SAP web application server.

    Hi,
    We are I a phase to develop a prototype of a WEB application server. I am very new to this concept and I want to know what is the SAP basic DB / System requirements to develop / prototype a WEB application server. If any links available to understand more about the SAP WAS will be useful for the next steps.
    Thanks
    With Regards
    Anil

    Hi Sri,
    to see the OS support go the Product Availability Matrix (PAM) which can be found here: http://service.sap.com/pam
    As for the J2EE specs, both SAP Web AS 640 (NW04) and SAP Web AS 700 (NW04s) are J2EE 1.3 compliant, and both are currently released. The next version which will be out sometime next year NW2007 is planned to be JEE 5 compliant.
    Cheers,
    Jeff

  • Best Server Role for Web Applications

    Hi,
    I'm running SQL Server 2008 R2 Express and using Microsoft SQL Server Manager Studio to administer it.  I have a web application that does read, add, update, and delete to the database and I am currently using the sa account - which is of course not
    a good idea.  I want to create a new user but I don't know what the best practice is for web applications and also security.  The options I have are:
    bulkadmin
    dbcreator
    diskadmin
    processadmin
    public
    securityadmin
    serveradmin
    setupadmin
    sysadmin
    Thanks.

    Hi mark_sti,
    Based on my understanding, you want to create a new user of the database. Using this new account, a web application could read, add, update, and delete the database.
    The options you provide are fixed server roles. For more information about fixed server roles, please refer to this article:
    Server-Level Roles.
    In this scenario, you need db_datareader fixed database role and db_datawriter fixed database role. Db_datareader fixed database role can read all data from all user tables. Db_datawriter fixed database role can add, delete, or change data in all user tables.
    To add two database roles, you should map the login to the database which is used by a web application in Login Properties. Then create a new database user, check Db_datareader fixed database role and Db_datawriter fixed database role on Membership page of
    Database User. About permission of different database roles, please refer to this article:
    Database-Level Roles.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • Is there a Web Applications Server for Oracle8?

    hi!
    I need to know if there is a Web Applications Server for
    Oracle8 on Linux. (I know there is one for Oracle7)
    Thanks!
    null

    PoNY (guest) wrote:
    : hi!
    : I need to know if there is a Web Applications Server for
    : Oracle8 on Linux. (I know there is one for Oracle7)
    : Thanks!
    i solved the same problem while download the application server
    via ftp
    ftp ftp.oracle.com
    cd /pub/www/oas/linux
    get was302.tar.Z
    If the connection is lost, you can continue downloading with
    reget was302.tar.Z
    The download starts not from the beginning, but appends the
    already transmitted part of the file.
    Hans
    null

  • Not able to change password in SAP WEB application server for BI 7 EHP 1.

    Hi all,
    I'm currently upgrading from BW 3.5 to BI 7 EHP 1.
    When logging to SAP WEB application server to execute a WEB report, it's not possible to change password. Even when a initial password has been set, the user are not forced or able to change it.
    Also to logon dialogue is more like a Windows pop-up than the Web based in 3.5.
    Anyone having a clue?
    Best regards
    Kent

    Hi Eriki,
    My problem is related to the WEB application server (WAS), not the Netweaver Portal.
    BR
    Kent

  • Installation guide for SAP Web Application Server

    Hi guys
    'm new to ep can u tel how to install   SAP Web Application Server
    thanks
    regards
    kamal

    hi anup
    thanks
    In this some commands are used whether it is unix  r some other os.. can u tel me someother answers also..
    Edited by: kamal_ep on Apr 7, 2009 8:12 AM

  • How to redeploy Calculation Manager Web Application Server

    Hi All,
    I am installing a patch(13925741) for Calculation Manager, i stuck at the following point:
    6. Perform the standard Calculation Manager Web application server deployment task using Hyperion Enterprise Performance Management System Configurator (EPM System Configurator). See the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions.
    I don't know how to redeploy Calculation Manager Web Application Server, plz help me in deploying this.
    The readme for the patch can be found at:
    https://updates.oracle.com/Orion/Services/download?type=readme&aru=15356919#_Toc330987031

    909062 wrote:
    Hi All,
    I am installing a patch(13925741) for Calculation Manager, i stuck at the following point:
    6. Perform the standard Calculation Manager Web application server deployment task using Hyperion Enterprise Performance Management System Configurator (EPM System Configurator). See the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions.
    I don't know how to redeploy Calculation Manager Web Application Server, plz help me in deploying this.
    The readme for the patch can be found at:
    https://updates.oracle.com/Orion/Services/download?type=readme&aru=15356919#_Toc330987031
    Hi,
    Did you actually try to look at the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions as suggested ?
    To redeploy a component, run the configurator that can be found in the start menu under Foundation Services. Then select "modify an existing instance". Then for Calculation manager, check the box "Deploy to application server".
    Thanks,
    JM

  • How sharepoint understand when user requests for web applications by their DNS names

    HI
    I configured Alternate access mapping in my sharepoint farm for default ,intranet zones
    and spt farm has two web front end servers and they load balancing by F5 device
    in WFE servers there are different web applications are running on different ports
    so here I want to know how load balancing works, load balancing configured in F5 device.
    when users request a webapplication from browser (ex http://cms) where this request will go
    1)when I ping cms and other web applicaations  it returns me a loadbalancer  server IP  for all web applications;
    ping cms : it returns 10.xxx.0.80 , same ip returns when I ping for other web app
    but ex CMS web application run on the 10.xxx.1.26:81 port in sharepoint server
    2) and these sharepoint web applications running on different ports in sharepoint  web servers , so here  how sharepoint understand when user requests for web applications by their DNS names
    http://cms and http://products  etc
    adil

    I'm not sure if the F5 can add a port number (I'm not an expert on load balancers).  But in general if you design the SharePoint site to run on port 81 then you need to have port 81 appended to the request or it won't work.  http://cms in your
    example would take you to http://cms:80 not http://cms:81.  But in general DNS will resolve the address back to the F5 load balancer.  The load balancer will look at the header of the HTTP request (which contains the original address you requested)
    and forward the request to the appropriate web front end IP address.  If your web front end is using one IP address for multiple sites then those sites need to be differntiated by using a custom port like 81 (which must be included in the original request)
    or because a host header was bound to the web application when it was created.  If they are running on different port numbers then the request must include the port number by the time it gets to the SharePoint server.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Why it take so long to start the SAP Web Application Server?

    As I read from the doc that starting the SAP Web Application Server will take from 25 to 40 minutes, I don't believe. But as I try it on my machine, it does take really so long. Isn't it a wonder?
    I am used to work with Tomcat, JBoss, BEA etc. None of them will take so long.

    Hi Chen,
    In a WAS I assume that it has dual stack (ABAP + JAVA)
    For the startup of a ABAP Stack it generally takes about 2 minutes or so.
    And for the WAS JAVA STACK should take around 8 to 15 minutes depending on the application, services and hardware sizing.
    The reason for the long time required for a WAS Java Stackis:
    JAVA Stack depends on three diffrent components: a) dispatcher(java) b)SDM c) Server0 process.
    Now before the execution of all these the first thing what happens is the initializastion of jcontrol which inturn initiates the java bootstrap process.
    At this moment of time the JVM environment takes some time for the loading and memory management. Once the JVM is loaded successfully then only the three compnents (SDM, dispatcher and server0) are initiated to run.
    The SDM and dispatcher do started up with a couple of services and hence require not toomuch of time.
    But the main component i.e Server0 process consumes a lot of time to startup at it requires many of the Java stack services to start before it reaches running state.
    Again the port configuration for HTTP for SDM , dispatcher , server0 and java process also takes place.
    So this was an overview for the Time required for a WAS Stack to come up in operational condition.
    Apart from this , seeing specifically to your scenario, wherein it takes 25 - 40 minutes could be an issue with the Hardaware sizing of the Server and the Sofware compnents / tools loaded. We might need to analyze it in more detail to get a clear picture.
    I hope this helps you!
    Regards,
    Prem

  • Custom host-name for web application SharePoint 2010

    I am facing a weird behavior. Can anyone help me regarding this?
    Steps performed:
    1. Created a web application using custom host name.
    2. Created a site collection using "Blank" site template. Nothing issues.
    3. Created another site collection using "Publishing" site template. Authentication prompt came multiple times. IIS logs/Fiddler/HTTP Watch are full with 401 entries.
    4. Added the custom host-name with web server IP in local desktop hosts file(which is in intranet domain). Prompt issue fixed.
    5. Authentication mode set as NTLM. 

    Hi DDasgupta,
    After you created a web application with a custom host name, if you got a prompt for the user and you may face the following issues:
    There is continuous prompt for the credentials
    HTTP 401.1 error
    This shows that there is a problem with the Loopback configuration. This situation should occur only when we access the application from the server machine.
    For fixing the problem, we have to disable the Loopback value inside the registry.Open the Registry Editor (regedit.exe) and locate the following key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa, and create a new Key Value of type DWORD inside
    it and set the value to 1.
    More information, please refer to the link:
    http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-2010-creating-host-name-for-web-application/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

Maybe you are looking for