Http_server error

Hi,
I have a problem starting 10g R2 AS with the http failed to start. The error message is like this:
Syntax error on line 216 of d:/ora10ginfra/apache/apache/conf/httpd.conf:
Cannot load d:/ias_infra/apache/apache/modules/apachemoduleperl.dll into server: (126) The specified module could not be found:
I've installed a 5.8 version of perl installed for some cloning reasons. Thats the only change i did and i don know why the http is not coming up now.
Any help will be highly appreciated.
Thanks in advance.
Sanky

I just did some testing. Take a look at your line vty configuration.
If there's a transport input protocol defined, like 'transport input ssh' the vty lines will not accept http connections, hence the 'out of lines' error.
If you change this into 'transport input all' it'll work.
When I said I did nothing for a couple of days, I meant I did do a reboot. As I was setting up my switch I had probably set the transport input to ssh and didn't save. So after the reload it was set to transport input all again.
This does leave an issue, that telnet access to the switch is possible and I don't like that. You can of course block this by using access lists.
I also wonder why there's no possibility to do 'transport input http'

Similar Messages

  • Error starting HTTP_Server.

    I've seen a lot of posts for this issue, but no definitive resolution.
    Build: Red Hat Enterprise Linux ES release 3 (Taroon Update 8)
    OAS: 10.1.3
    Desired Build: Integrated HTTP Server/OC4j
    The log entry contains the following:
    06/10/06 09:00:06 Start process
    When I try to start up the http server alone I receive:
    Ouch! ap_mm_create(1048576, "/tmp/apache/logs/mm.8864") failed
    Error: MM: mm:core: failed to open memory file (No such file or directory): OS: No such file or directory
    Researching this doesn't give me much.
    Can someone point me in the right direction to resolve this? I tried metalink...they have a patch for solaris, not much else. I've looked the forum over and didn't find much other than unanswered posts for the same issue. On the wire I found something aobut the sysctl settings needing to be changed. Is there documentation somewhere about what kernel parameters need to be set for an OAS install on Redhat ES 3? Have I overlooked some other resources?
    Sincerely,
    -abe
    [oracle@oas bin]$ ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=oas.dbtest.mycompany.com:6200
    0 of 1 processes started.
    ias-instance id=1013as.oas.dbtest.mycompany.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server/
    Error
    --> Process (index=1,uid=816978092,pid=8821)
    failed to start a managed process after the maximum retry limit
    Log:
    /u01/app/oracle/product/10.1.3/opmn/logs/HTTP_Server~1
    [oracle@oas bin]$ ./opmnctl status
    Processes in Instance: 1013as.oas.dbtest.mycompany.com
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    OC4J | home | 6731 | Alive
    HTTP_Server | HTTP_Server | N/A | Down
    ASG | ASG | N/A | Down
    [oracle@oas bin]$

    Hi,
    THis error has nothing to do with your as , I "think"U must focus on three points
    1- Kernel parameters
    2- Memory
    -3 space on you FS
    Ok. before you start to look here &there. just stop all your AS process
    make sure no process for your as is up & running.
    under /Apache/Apache/logs U 'll find a file http.pid just delete this one.
    then Restart your AS per process
    #opmnctl startproc process-type= (process-type)
    check again the error & let me know
    Regards,
    Hamdy

  • Error Facing in HTTP_Server

    Hi every one,
    pls help me out regarding below problem.
    I am facing this problem during startup of HTTP_Server
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=app_prod:6201
    5 of 6 processes started.
    ias-instance id=asdb1.app_prod.jslerp.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=2764916)
    failed to start a managed process after the maximum retry limit
    Log:
    /u04/AppServer/OraHome_2/opmn/logs/HTTP_Server~1

    Hi ,
    A cause can be when access.log (Apache/Apache/logs/access_log) grows more than 2Gb in size
    Look in
    /u04/AppServer/OraHome_2/opmn/logs/HTTP_Server~1
    for a more detailed reason of the error . You should find a line with text "Start process" and after this probably more information
    about why it cannot be started
    BR,
    Mihai

  • Error while installing 10g EM Grid Control on Windows 2003

    Hi Experts,
    I am facing following error while installing EM Grid Control, please help me find solution:
    Here are the installation error found in the log file:
    INFO: oracle.sysman.top.oms:Start Opmn Error = CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall have completed with exitCode=206
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
    'opmnctl: starting opmn and all managed processes...
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
    '================================================================================
    opmn id=emgc:6201
    5 of 6 processes started.
    ias-instance id=EnterpriseManager0.emgc
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=1416)
    failed to start a managed process after the maximum retry limit
    Log:
    C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
    INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 5 have been completed with status=false
    INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
    INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
    INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=C:\OracleHomes\oms10g:label=0}
    INFO: Framework waiting for Action to complete at 11:45:05.168
    INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
    INFO: OuiConfigVariables:About to execute plug-in OUI_CA
    INFO: OuiConfigVariables:The plug-in OUI_CA is running
    INFO: OuiConfigVariables:Launching CmdExec
    INFO: OuiConfigVariables:ExitCode=0
    INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
    INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
    INFO: done waiting for Action from 11:45:05.168
    INFO: Cfm.save() was called
    INFO: Cfm.save(): 21 aggregate instances saved
    Any help or direction will be highly appreciated.
    Regards,
    MS

    i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
    the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
    where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
    error reads :
    -error cheching the existence of the SYSMAN user in Management repository
    -exception occured while connecting to database . please check the connection details you specified and retry
    -io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
    REP DB HOSTNAME:SA-OMS-01
    PORT:1521
    SERVICE/SID:OMSDB01
    SYSMAN PASSWORD:PASS
    THE REST I PUT PASS AS PASSWORD
    NOT SURE WHAT TO DO NEXT.

  • Error while starting Oracle App server

    I installed Oracle App Server
    when i am trying to start App server I am getting following error.
    K:\OAS\opmn\bin>opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=coeserv0:6200
    0 of 1 processes started.
    ias-instance id=ORACOESERVER.coeserv0.wipro.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=10760)
    failed to start a managed process after the maximum retry limit
    Log:
    k:\OAS\opmn\logs\HTTP_Server~1
    I tried to start Apache it is also giving following error.
    K:\OAS\Apache\Apache>apache
    [Tue May 17 17:43:08 2005] [warn] pid file k:/oas/apache/apache/logs/httpd.pid o
    verwritten -- Unclean shutdown of previous Apache run?
    ap_spawn_child: Bad file descriptor
    Couldn't fork child for piped log process
    Note the errors or messages above, and press the <ESC> key to exit. 29...
    K:\OAS\Apache\Apache>
    Amit

    Hi Cema,
    Make sure that httpd.conf file (located at /ORACLE_HOME/Apache/Apache/conf ) has not changed.
    Is your AS running on Linux? ".so" is used in case of linux only and for windows extension should be ".dll"
    Please use the same if your http server is running on windows. HTTP Server documetation may have more details related to this.
    Regards,
    Anuj

  • HTTP_Server when starting OPMN.

    Hi,
    I am encountering the following error while trying to start the opmn :
    C:\OraHome_2\oracleas_mid4b2b\opmn\bin>opmnctl shutdown
    opmnctl: shutting down opmn and all managed processes...
    C:\OraHome_2\oracleas_mid4b2b\opmn\bin>opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=PUNITP75966D:6201
    5 of 6 processes started.
    ias-instance id=oracleas_mid4b2b.punitp75966d.ad.infosys.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=1816)
    time out while waiting for a managed process to start
    Log:
    C:\OraHome_2\oracleas_mid4b2b\opmn\logs\HTTP_Server~1
    On the console, HTTP_Server has a status of "unavailable".
    I tried shutting down all services from services.msc and restarting the machine. Still the HTTP_Server doesn't come up. I also checked the <ORA-HOME>/opmn/logs
    08/11/14 11:24:04 Start process
    [Fri Nov 14 11:24:04 2008] [warn] pid file c:/orahome_2/oracleas_mid4b2b/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    [Fri Nov 14 11:24:04 2008] [error] mod_ossl: Init: SSL call to NZ function nzos_OpenWallet failed with error 28759 (Server PUNITP75966D.ad.infosys.com:443, wallet file:C:\\OraHome_2\\oracleas_mid4b2b\\Apache\\Apache\\conf\\ssl.wlt\\default)
    [Fri Nov 14 11:24:04 2008] [error] mod_ossl: Failed to open the wallet [Hint: incorrect path, incorrect password, bad wallet, ...]
    Error: Failed to open the wallet [Hint: incorrect path, incorrect password, bad wallet, ...] (Server PUNITP75966D.ad.infosys.com:443, wallet file:C:\OraHome_2\oracleas_mid4b2b\Apache\Apache\conf\ssl.wlt\default)
    08/11/14 11:51:20 Start process
    [Fri Nov 14 11:51:23 2008] [warn] pid file c:/orahome_2/oracleas_mid4b2b/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/14 12:10:25 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/14 12:20:53 Start process
    08/11/14 18:42:32 Stop process
    08/11/14 18:45:15 Start process
    [Fri Nov 14 18:45:25 2008] [warn] pid file c:/orahome_2/oracleas_mid4b2b/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/14 21:10:25 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/14 22:09:37 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/14 22:57:44 Start process
    08/11/17 08:23:43 Start process
    [Mon Nov 17 08:23:56 2008] [warn] pid file c:/orahome_2/oracleas_mid4b2b/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 08:59:10 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 09:02:06 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 09:27:27 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 10:05:13 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 10:19:34 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 10:27:00 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 10:33:16 Start process
    08/11/17 10:35:15 Stop process
    08/11/17 10:55:09 Start process
    [Mon Nov 17 10:55:24 2008] [warn] pid file c:/orahome_2/oracleas_mid4b2b/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 11:40:49 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 12:22:27 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 12:43:11 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 12:59:27 Start process
    08/11/17 13:01:26 Stop process
    08/11/17 13:07:31 Start process
    [Mon Nov 17 13:07:48 2008] [warn] pid file c:/orahome_2/oracleas_mid4b2b/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 13:15:49 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    08/11/17 14:00:40 Start process
    Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server running...
    Can this error occur due to any changes while enabling SSL in opmn.xml or while specifying the wallet location in tip.properties?
    MLR #5 Patch has been installed on B2B
    Thanks & Regards,
    Suhas.

    Please the wallet location specified in the Apache SSL configuration holds the wallet. File to look for "$ORACLE_HOME/Apache/Apache/conf/ssl.conf".
    Look for the directory name configured against "SSLWallet" and the directory should contain valid ewallet.p12.
    Sample installation in my box,
    SSLWallet file:C:\Oracle10g\midtier2\Apache\Apache\conf\ssl.wlt\default
    HTH.
    Regards,
    Sinkar
    [From Ramesh Team]

  • HTTP_Server failed on Oracle Install

    when installing application server 10g infrastructure on windows XP, I get the following error during the OPMN configuration assistant phase.
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=2100)
    time out while waiting for a managed process to start
    Log:
    C:\OraHome\opmn\logs\HTTP_Server~1
    under /apache/logs/error_log shows the following ...
    [Sat Dec 16 13:12:48 2006] [crit] (22)Invalid argument: mod_plsql: Unable to initialize Oracle OCI
    [Sat Dec 16 13:12:48 2006] [error] (22)Invalid argument: mod_plsql: Please check your enviroment.\nORACLE_HOME is [c:\\orahome]\nPATH is [C:\\OraHome\\bin;C:\\OraHome\\Perl\\5.6.1\\bin\\MSWin32-x86;C:\\OraHome\\Apache\\Apache\\fastcgi;C:\\OraHome\\opmn\\bin;C:\\OraHome\\opmn\\lib;C:\\OraHome\\bin;C:\\OraHome\\Perl\\5.6.1\\bin\\MSWin32-x86;C:\\OraHome\\Apache\\Apache\\fastcgi;C:\\OraHome\\opmn\\bin;C:\\OraHome\\opmn\\lib;C:\\OraHome\\opmn\\bin;C:\\OraHome\\opmn\\lib;C:\\OraHome\\jlib;C:\\orant\\bin;C:\\WINDOWS\\system32;C:\\WINDOWS;C:\\WINDOWS\\System32\\Wbem;C:\\Apps\\ant165\\bin;]\nNLS_LANG is [Not Set]
    PLEASE HELP. I tried correcting the PATH and ENV like the error stated but still no use. what do i need to do to fix this error?

    And a third that seems to be related to the last one - but windows specific and with a couple more details:
    Invalid Argument: Unable To Initialize Oracle Oci Check Your Environment
         Doc ID:      Note:391304.1      Type:      PROBLEM
         Last Revision Date:      13-SEP-2006      Status:      MODERATED
    In this Document
    Symptoms
    Cause
    Solution
    This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
    Applies to:
    Oracle Applications Manager - Version: 11.5.10.2
    Microsoft Windows Server 2003 (64-bit Itanium)
    Microsoft Windows Server 2003
    Symptoms
    (22)Invalid argument: Unable to initialize Oracle OCI
    (22)Invalid argument: Please check your enviroment.
    Cause
    NLS settings in registry
    NLS var mismatch
    Solution
    1.Take a back up of the current registry and then Delete the ORACLE main registry.
    2.Run Auto-config.
    3.After that
    a. Comment out ORA_NLS33 from environment variable under 8.0.6 Oracle Home.
    b. Take out the entry of ORA_NLS33 from the registry of 8.0.6 Oracle Home.
    c. Comment plsql.conf from oracle_apache.conf

  • J2ee Application Deployed,error connecting to 9i db

    Hi,
    I am working on a Oracle 10g 9.0.4 AS and a Oracle 9i db, both of which I have just installed on red Hat Linux 2.1 Advanced Server.
    I have deployed a j2ee ear file in an OC4J container. The deployment works fine as I get the login page correctly. But it fails to go further than that and gives an error "contact system administrator".The Http Server logs show the following error messages :
    [Fri Mar 25 13:07:22 2005] [error] [client 127.0.0.1] [ecid: 172.16.117.169:61745:1111736242948,2] MOD_OC4J_0015: recv() returns 0. There
    has no message available to be received and oc4j has gracefully (orderly) closed the connection.
    [Fri Mar 25 13:07:22 2005] [error] [client 127.0.0.1] [ecid: 172.16.117.169:61745:1111736242948,2] MOD_OC4J_0054: Failed to call network
    routine to receive an ajp13 message from oc4j.
    [Fri Mar 25 13:07:22 2005] [error] [client 127.0.0.1] [ecid: 172.16.117.169:61745:1111736242948,2] MOD_OC4J_0033: Failed to receive an
    ajp13 message from oc4j.
    [Fri Mar 25 13:07:22 2005] [warn] [client 127.0.0.1] [ecid: 172.16.117.169:61745:1111736242948,2] MOD_OC4J_0078: Network connection errors
    happened to host: midtier.mastek.com and port: 3303 while receiving the first response from oc4j. This request is recoverable.
    I have configured a user in the database with the reqd schema and also a datasource pointing to it and whose jndi name I have specified in the application.
    Also, I get an error saying in the OC4J container :
    05/03/25 13:02:28 log4j:WARN No appenders could be found for logger (org.apache.struts.util.PropertyMessageResources).
    05/03/25 13:02:28 log4j:WARN Please initialize the log4j system properly.
    indicating that mebbe the logging hasnt been successfully installed and that's mebbe why I am not getting proper error messages.
    I am thinking that there maybe some error in the connection to the 9i database, but cant figure out what.
    PLEASE,PLEASE HELLLLPPPPP!!!!

    Also got these in logs
    emias.log
    com.evermind.server.http.HttpIOException: Broken pipe ---> Enterprise Manager
    em-application.log
    Broken pipe sometimes followed with : java.io.FileNotFoundException: Could not find ias/.uix
    and                    : java.io.FileNotFoundException: Could not find ias/clusters/.uix
    OHS errors :
    [warn] [client 127.0.0.1] MOD_OC4J_0078: Network connection errors happened to host: midtier.mastek.com and port: 3303 while receiving
    the first response from oc4j. This request is recoverable.
    March 25, 2005 12:47:15 PM IST HTTP_Server Error ohs [error] [client 172.16.117.254] (32)Broken pipe: MOD_OC4J_0087: Got an unexpected error while calling send() to send a message to oc4j
    and the error code is 32.
    March 25, 2005 12:47:15 PM IST HTTP_Server Error ohs [error] [client 172.16.117.254] MOD_OC4J_0053: Failed to call network routine to send out an ajp13 buffer message to oc4j.
    March 25, 2005 12:47:15 PM IST HTTP_Server Error ohs [error] [client 172.16.117.254] MOD_OC4J_0032: Failed to send out an ajp13 message to oc4j.
    March 25, 2005 12:47:21 PM IST HTTP_Server Error ohs [error] [client 127.0.0.1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly)
    closed the connection.
    March 25, 2005 12:47:21 PM IST HTTP_Server Error ohs [error] [client 127.0.0.1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
    March 25, 2005 12:47:21 PM IST HTTP_Server Error ohs [error] [client 127.0.0.1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.

  • R12 Rapidwiz Error

    Hi Hussein,
    I am using RHEL 5.3 for R12.1.1.1 Installation
    This is Ajaz Ahmed. Thanks for your timely help. I was using this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
    for Linux (32-bit) [ID 402310.1] to Install R 12.1.1.1. as per your reply and the recommended document I
    Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).. I started to install. Prior to that I completed
    all the pre-requisites. When running ./rapidwiz from the Stage12/startCD/Disk1/rapidwiz folder as a root user I get the following error.
    Exception in thread "main" java.lang.UnsatisfiedLinkError: /mnt/hgfs/Stage12/startCD/Disk1/rapidwiz/jre/Linux/1.6.0/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.load0(Unknown Source)
    at java.lang.System.load(Unknown Source)
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    I am not able to proceed further. What can be the issue this time.
    Best Regards
    Ajaz Apps
    Ajaz Ahmed
    9967890118
    Mumbai
    e-mail : [email protected]
    [email protected]

    Hi Hussein,
    Earlier I was Installing with this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
    for Linux (32-bit) [ID 402310.1]. Error Rectified.
    As per your suggestion I installed the R 12.1.1.1. using Red Het Entp. Linux 5.3 using the recommended document
    Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).
    As per Note: 761564.1 document also I got the same error
    The installation is completed after all the 5 steps. During the post install task
    For the system checks there were errors in
    RHEL 5.3 Errors
    1) HTTP
    checking URL = http://r12vis.apps12.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    2) Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    3) Login Page
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
    RW-50016: Error: - {0} was not created:
    File = {1}
    4) Help Page
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    5) JSP
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding
    From the other terminal window I stopped and restarted all the appstier services.
    There after during the retry option of installation for system checks only two errors
    Remained which are
    1) JSP
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding
    2) Login Page
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
    RW-50016: Error: - {0} was not created:
    File = {1}
    When I click next button I get the following message
    RW-10001 – RapidWizard Install had detected that your configuration has errors
    You must resolves these issues before continuing
    As no other alternative left I press the cancel button.
    After bouncing the linux service I started the DB Tier and Apps tier, but again I face the same problem of JSP and Login Page.
    I logged on to application as applmgr and thru the path
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/bin
    I run the ./opmnctl status command which gave me the error
    Unable to connect to opmn.
    Opmn may not be up.
    So I started the services using
    ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    GETHOSTBYNAME(ap6004bld.us.oracle.com): 2
    ================================================================================
    opmn id=r12vis.apps.com:6001
    0 of 3 processes started.
    ias-instance id=APPS_C_HOME.ap6004bld.us.oracle.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=7473)
    failed to start a managed process after the maximum retry limit
    Log:
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/HTTP_Server~1
    ias-component/process-type/process-set:
    WebCache/WebCache/WebCache
    Error
    --> Process (pid=7472)
    failed to start a managed process after the maximum retry limit
    Log:
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCache~1
    ias-component/process-type/process-set:
    WebCache/WebCacheAdmin/WebCacheAdmin
    Error
    --> Process (pid=7466)
    failed to start a managed process after the maximum retry limit
    Log:
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCacheAdmin~1
    After that I stopped the Apps tier. Logged in sys ‘as/sysdba’ and unlocked the apps account.
    Started the Apps tier. But again I was not able to login.
    After that I stopped the Apps tier, keeping the DB Tier ip. And run the Autoconfig from Apps Tier path /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/scripts
    sh adautocfg.sh
    I get the error as AutoConfig completed with errors.
    /d02/oas/oracle/OASDB/db/tech_st/10.2.0/appsutil/log/OASDB_testappsdb/06300116/adconfig.log
    Enter the APPS user password:
    The log file for this session is located at: /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/log/06300418/adconfig.log
    AutoConfig is configuring the Applications environment...
    AutoConfig will consider the custom templates if present.
    Using CONFIG_HOME location : /d01/oracle/VIS/inst/apps/VIS_r12vis
    Classpath : /d01/oracle/VIS/apps/apps_st/comn/java/lib/appsborg2.zip:/d01/oracle/VIS/apps/apps_st/comn/java/classes
    Using Context file : /d01/oracle/VIS/inst/apps/VIS_r12vis/appl/admin/VIS_r12vis.xml
    Context Value Management will now update the Context file
    Updating Context file...COMPLETED
    Attempting upload of Context file and templates to database...COMPLETED
    Configuring templates from all of the product tops...
    Configuring AD_TOP........COMPLETED
    Configuring FND_TOP.......COMPLETED
    Configuring ICX_TOP.......COMPLETED
    Configuring MSC_TOP.......COMPLETED
    Configuring IEO_TOP.......COMPLETED
    Configuring BIS_TOP.......COMPLETED
    Configuring AMS_TOP.......COMPLETED
    Configuring CCT_TOP.......COMPLETED
    Configuring WSH_TOP.......COMPLETED
    Configuring CLN_TOP.......COMPLETED
    Configuring OKE_TOP.......COMPLETED
    Configuring OKL_TOP.......COMPLETED
    Configuring OKS_TOP.......COMPLETED
    Configuring CSF_TOP.......COMPLETED
    Configuring IGS_TOP.......COMPLETED
    Configuring IBY_TOP.......COMPLETED
    Configuring JTF_TOP.......COMPLETED
    Configuring MWA_TOP.......COMPLETED
    Configuring CN_TOP........COMPLETED
    Configuring CSI_TOP.......COMPLETED
    Configuring WIP_TOP.......COMPLETED
    Configuring CSE_TOP.......COMPLETED
    Configuring EAM_TOP.......COMPLETED
    Configuring FTE_TOP.......COMPLETED
    Configuring ONT_TOP.......COMPLETED
    Configuring AR_TOP........COMPLETED
    Configuring AHL_TOP.......COMPLETED
    Configuring OZF_TOP.......COMPLETED
    Configuring IES_TOP.......COMPLETED
    Configuring CSD_TOP.......COMPLETED
    Configuring IGC_TOP.......COMPLETED
    AutoConfig completed with errors.
    The E-Business Home Page is located at http://r12vis.apps.com:8000/OA_HTML/AppsLogin
    If your browser doesn't automatically redirect to its new location, click here.
    what can be the other possibility ? shall I try with Red Hat Entp. Linux 4 (32-Bit) ?
    If you have some other documents please send me on my mail-id's.
    Regards
    Ajaz Ahmed
    9967890118
    Mumbai
    e-mail : [email protected]
    [email protected]

  • Error while installing Grid control on XP-32bits

    Bonjour,//hello
    Je vais avoir besoin d'un petit coup de main.//I need help.
    J'ai installé le grid control 10.2.0.1 sur une machine XP 32bits x86 et j'ai un pb pour démarrer mon serveur http.
    //I have installed grid control 10.2.0.1 on XP windows 32 bits, I have a error message when I try to start HTTP_Server process.
    Je lance la commande :
    //I launch the command :
    opmnctl startproc ias-component=HTTP_Server
    et j'ai le message d'erreur :
    //and I get the error message :
    =====================================================================
    opmn id=acer_jojo:6201
    0 of 1 processes started.
    ias-instance id=EnterpriseManager0.acer_jojo
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=3236)
    failed to start a managed process after the maximum retry limit
    Log:
    C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
    Log of HTTP_Server~1:
    [Mon Feb 15 15:34:22 2010] [warn] pid file c:/oraclehomes/oms10g/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    [Mon Feb 15 15:34:22 2010] [error] mod_ossl: Init: Server acer_jojo:1159: SSL setup failed: call to nzos_OpenWallet returned error 28750
    [Mon Feb 15 15:34:22 2010] [error] mod_ossl: Unknown error
    Log of C:\%ORACLE_HOME%\Apache\Apache\logs\ssl_engine_log :
    [17/févr./2010 07:39:16 04480] [warn] Init: (acer_jojo:1159) SSL setup warning: the use of SSLWalletPassword is deprecated and will not be supported in a future release. Please use auto-login enabled wallets! Refer to your administrator guide for more details.
    [17/févr./2010 07:39:16 04480] [error] Init: Server acer_jojo:1159: SSL setup failed: call to nzos_OpenWallet returned error 28750
    [17/févr./2010 07:39:16 04480] [error] Unknown error
    Thx for your help!
    Merci si vous pouvez m'aider !

    Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause.  If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.

  • OPMN ERROR while starting

    WHen I try to start the opmn process I get the following error:
    [oracle@ip-10-0-20-40 bin]$ ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=ip-10-0-20-40:6200
    1 of 2 processes started.
    ias-instance id=IAS-1.ec2-46-51-197-244.eu-west-1.compute.amazonaws.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server/
    Error
    --> Process (index=1,uid=2128376900,pid=24434)
    failed to start a managed process after the maximum retry limit
    Log:
    /u01/app/oracle/Middleware_1034_AIA/ora_soa10135/opmn/logs//HTTP_Server~1.log
    The content of the log file is below:
    12/03/09 02:25:45 Start process
    /u01/app/oracle/Middleware_1034_AIA/ora_soa10135/Apache/Apache/bin/apachectl startssl: execing httpd
    /u01/app/oracle/Middleware_1034_AIA/ora_soa10135/Apache/Apache/bin/httpd: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directory
    12/03/09 02:42:11 Start process
    /u01/app/oracle/Middleware_1034_AIA/ora_soa10135/Apache/Apache/bin/apachectl startssl: execing httpd
    /u01/app/oracle/Middleware_1034_AIA/ora_soa10135/Apache/Apache/bin/httpd: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directory
    12/03/09 02:42:13 Start process
    /u01/app/oracle/Middleware_1034_AIA/ora_soa10135/Apache/Apache/bin/apachectl startssl: execing httpd
    /u01/app/oracle/Middleware_1034_AIA/ora_soa10135/Apache/Apache/bin/httpd: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directory
    12/03/09 02:47:19 Start process
    apachectl is not owned by this user
    12/03/09 02:47:21 Start process
    apachectl is not owned by this user
    12/03/09 04:14:41 Start process
    apachectl is not owned by this user
    12/03/09 04:14:41 Start process
    apachectl is not owned by this user

    I have found out the problem and solution for this OPMN error, its actually our Fusion team work
    the error is caused by Port conflicts we believe
    so by using these set of commands of opmnctl
    usage: opmnctl [verbose] [<scope>] <command> [<options>]
    verbose: print detailed execution message if available
    Permitted <scope>/<command>/<options> combinations are:
    scope command options
    start - Start opmn
    startall - Start opmn & all managed processe
    stopall - Stop opmn & all managed processe
    shutdown - Shutdown opmn & all managed proce
    [<scope>] startproc [<attr>=<val> ..] - Start opmn managed processes
    [<scope>] restartproc [<attr>=<val> ..] - Restart opmn managed processes
    [<scope>] stopproc [<attr>=<val> ..] - Stop opmn managed processes
    [<scope>] reload - Trigger opmn to reread opmn.xml
    [<scope>] status [<options>] - Get managed process status
    [<scope>] dmsdump [<attr>=<val>&..] - Get DMS stats
    [<scope>] set [<attr>=<val> ..] - Set opmn log parameters
    [<scope>] query [<attr>=<val>] - Query opmn log parameters
    ping [<max_retry>] - Ping local opmn
    validate [<filename>] - Validate the given xml file
    config [<options>] - Modify the opmn xml file
    help - Print brief usage description
    usage [<command>] - Print detailed usage description
    we have shutdown the opmn box and restarted all of its process
    it did not happen in the first time itself i have to repeat this for a several times then the SOA suite is running normally
    if any one faces this issue i can help

  • Error during OPMNCTL start

    Hi!
    I got the follow error during start of OC4J server on my OIM 9.03 Environment:
    (PS. The most strange is that the Environment was working fine before..I do not do any changes there..)
    10/01/05 11:14:17 Start process
    10/01/05 11:14:59 WARNING: Application.setConfig Application: Xellerate is in failed state as initialization failed.
    java.lang.InstantiationException: Error initializing ejb-modules: No javax.jms.Destination found at the specified destination-location (queue/xlQueue) for MessageDrivenBean MessageHandlerMDB
    10/01/05 11:15:07 Loading xalan.jar for XPathAPI.
    10/01/05 11:15:08 Nexaweb Technologies Inc.(C)2000-2004. All Rights Reserved.
    10/01/05 11:15:08 Nexaweb Technologies Inc.
    10/01/05 11:15:08 10 Canal Park
    10/01/05 11:15:08 Cambridge, MA 02141
    10/01/05 11:15:08 Tel: 617.577.8100. Email: [email protected]
    10/01/05 11:15:08
    10/01/05 11:15:08 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
    10/01/05 11:15:08 WARNING: OC4J will not send ONS ProcReadyPort messages to opmn for service: OC4JServiceInfo id: null protocol: jms hostname: null port: 12601 description: null
    10/01/05 11:15:08 null hostname was null
    10/01/05 11:15:11 Start process
    10/01/05 11:15:57 WARNING: Application.setConfig Application: Xellerate is in failed state as initialization failed.
    java.lang.InstantiationException: Error initializing ejb-modules: No javax.jms.Destination found at the specified destination-location (queue/xlQueue) for MessageDrivenBean MessageHandlerMDB
    10/01/05 11:16:04 Loading xalan.jar for XPathAPI.
    10/01/05 11:16:04 Nexaweb Technologies Inc.(C)2000-2004. All Rights Reserved.
    10/01/05 11:16:04 Nexaweb Technologies Inc.
    10/01/05 11:16:04 10 Canal Park
    10/01/05 11:16:04 Cambridge, MA 02141
    10/01/05 11:16:04 Tel: 617.577.8100. Email: [email protected]
    10/01/05 11:16:04
    10/01/05 11:16:05 WARNING: OC4J will not send ONS ProcReadyPort messages to opmn for service: OC4JServiceInfo id: null protocol: jms hostname: null port: 12601 description: null
    10/01/05 11:16:05 null hostname was null
    10/01/05 11:16:05 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
    10/01/05 11:16:09 Start process
    10/01/05 11:16:57 WARNING: Application.setConfig Application: Xellerate is in failed state as initialization failed.
    java.lang.InstantiationException: Error initializing ejb-modules: No javax.jms.Destination found at the specified destination-location (queue/xlQueue) for MessageDrivenBean MessageHandlerMDB
    10/01/05 11:17:03 Loading xalan.jar for XPathAPI.
    10/01/05 11:17:04 Nexaweb Technologies Inc.(C)2000-2004. All Rights Reserved.
    10/01/05 11:17:04 Nexaweb Technologies Inc.
    10/01/05 11:17:04 10 Canal Park
    10/01/05 11:17:04 Cambridge, MA 02141
    10/01/05 11:17:04 Tel: 617.577.8100. Email: [email protected]
    10/01/05 11:17:04
    10/01/05 11:17:05 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
    10/01/05 11:17:05 WARNING: OC4J will not send ONS ProcReadyPort messages to opmn for service: OC4JServiceInfo id: null protocol: jms hostname: null port: 12601 description: null
    10/01/05 11:17:05 null hostname was null
    [oracle@sgadev bin]$ ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=sgadev:6200
    0 of 2 processes started.
    ias-instance id=sgadev.sgadev
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server/
    Error
    --> Process (index=1,uid=55517071,pid=20343)
    failed to start a managed process after the maximum retry limit
    Log:
    /u01/app/oracle/OraSOA/opmn/logs//HTTP_Server~1.log
    ias-component/process-type/process-set:
    default_group/home/default_group/
    Error
    --> Process (index=1,uid=55517072,pid=20510)
    failed to start a managed process after the maximum retry limit
    Log:
    /u01/app/oracle/OraSOA/opmn/logs//default_group~home~default_group~1.log
    [oracle@sgadev bin]$
    [oracle@sgadev bin]$ ./opmnctl status
    Processes in Instance: sgadev.sgadev
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    ASG | ASG | N/A | Down
    OC4JGroup:default_group | OC4J:home | N/A | Down
    HTTP_Server | HTTP_Server | N/A | Down
    [oracle@sgadev bin]$

    Yes as I mentioned earlier I did start it from command line as well as windows service and none of them seems to be working.
    Does any else encountered this issue during the instal?
    Thanks
    Prash
    Edited by: Prash11 on Aug 31, 2010 2:19 PM

  • Opmnctl , http_server timeout

    Hello,
    i faced this issue after i installed BI Discoverer 10.1.2.0 into Windows Server 2003.
    When i type opmnctl startall, the error shows that process timeout for http_server
    Error
    --> Process (pid=4652)
    time out while waiting for a managed process to start
    Log:
    D:\oracle\BIHome_1\opmn\logs\HTTP_Server~1
    the http_server is always down and never up..can anyone help me on this??

    Hi
    I ask this question a lot in here but do you have a fully qualified domain name in your HOSTS file on the server? Also, what is the name by which the computer is known? If its now fully qualified you won't get application server to work.
    Please check these things first and let us know your findings.
    Best wishes
    Michael

  • Oracle HTTP_Server cannot start

    bonjour,
    Je viens d'installer Oracle VM Template for Siebel CRM version 1 ( oracle vm server 2.2 + db oracle G10 vm + siebel 8.0 vm)
    Après l'installation, je démarrage le serveur VM de la db sans problème mais le lancement de l'application Siebel sur le serveur qui hébergé l'application génère les messages d'erreur suivants :
    siebel@ovssiebel /u01]$ ./app_start.sh
    *** Starting Siebel Application Server ... ***
    starting gateway server...
    started at Sun Dec 27 11:46:11 2009, pid: 5675
    starting siebel server...
    Siebel Server "siebel80" (Enterprise "siebel")
    not started: Cannot confirm start of service process
    starting web server...
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=ovssiebel:6200
    0 of 1 processes started.
    ias-instance id=IAS-1
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server/
    Error
    --> Process (index=1,uid=916208445,pid=5730)
    failed to start a managed process after the maximum retry limit
    Log:
    /u01/app/siebel/web/opmn/logs/HTTP_Server~1
    *** Startup of Siebel Application Server is complete. ***
    -dans les fichiers log HTTP_Server~1 , j'ai le message:
    /u01/app/siebel/web/ohs/bin/apachectl startssl: execing httpd
    merci pour votre aide ☺

    Bonjour Erik,
    voici le résultat :
    [siebel@ovssiebel bin]$ ./apachectl startssl
    Syntax error on line 1187 of /u01/app/siebel/web/ohs/conf/httpd.conf:
    Cannot load /u01/app/siebel/web/ohs/modules/libmod_swe.so into server: libstcaswpi.so: cannot open shared object file: No such file or directory
    ./apachectl startssl: httpd could not be started
    WARNING!! Direct use of apachectl within Oracle9iAS is
    deprecated. Using apachectl in conjunction with opmn may lead
    to unexpected behavior (such as opmn automatically restarting
    OHS after it has been shutdown using apachectl). Please use
    opmnctl (located at ORACLE_HOME/opmn/bin/opmnctl) instead.
    apachectl may not be shipped with future versions of Oracle9iAS.
    NB :
    httpd.conf :
    1184 # Include the configuration files needed for mod_osso
    1185 #include "/u01/app/siebel/web/ohs/conf/mod_osso.conf"
    1186 #mod_swe
    1187 LoadModule swe_module modules/libmod_swe.so
    Merci d'avance
    Best regards
    JM
    Edited by: [email protected] on 28 déc. 2009 04:59

  • My Oracle AS HTTP_Server cannot start now !

    I use command './opmnctl startall' to start My My Oracle AS Server, But it didn't work now.
    step 1
    $ ./opmnctl status
    Processes in Instance: ias.c.abc.net
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    ASG | ASG | N/A | Down
    OC4JGroup:default_group | OC4J:oc4j_soa | N/A | Down
    OC4JGroup:default_group | OC4J:home | N/A | Down
    HTTP_Server | HTTP_Server | N/A | Down
    step 2
    $ ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=c.abc.net:6200
    2 of 3 processes started.
    ias-instance id=ias.c.abc.net
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server/
    Error
    --> Process (index=1,uid=878718185,pid=5735)
    failed to start a managed process after the maximum retry limit
    Log:
    /home/oracle/app/ias/opmn/logs//HTTP_Server~1.log
    step 3
    $ ./opmnctl status
    Processes in Instance: ias.c.abc.net
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    ASG | ASG | N/A | Down
    OC4JGroup:default_group | OC4J:oc4j_soa | 5689 | Alive
    OC4JGroup:default_group | OC4J:home | 5688 | Alive
    HTTP_Server | HTTP_Server | N/A | Down
    step 4
    $ ./opmnctl startproc process-type=HTTP_Server
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=c.abc.net:6200
    0 of 1 processes started.
    ias-instance id=ias.c.abc.net
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server/
    Error
    --> Process (index=1,uid=878718188,pid=6246)
    failed to start a managed process after the maximum retry limit
    Log:
    /home/oracle/app/ias/opmn/logs//HTTP_Server~1.log
    Thx for any help !

    The error log I find in the error_logs.<99999> file is :
    [Mon Jul 14 17:22:07 2008] [warn] pid file /home/oracle/app/ias/Apache/Apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    fopen: Permission denied
    httpd: could not log pid to file /home/oracle/app/ias/Apache/Apache/logs/httpd.pid
    I'm sure the Oracle SOA Suite Version is 10.1.4. I get Oracle Application Server 10g Software (10.1.3.x) at http://www.oracle.com/technology/software/products/ias/index.html.
    And I get the patchs(p5983637_101420_LINUX.zip, p5983640_101420_LINUX.zip) from metalink.
    It works well for about half of year. A few days ago, my workmate stop the server use command './opmnctl shutdown', but this command no response, so she reboot the server, And it didn't work now.

Maybe you are looking for

  • Why can't I sent or reply from my iPhone 5C from Cogeco?

    I had the iphone 4s and it worked perfectly. Because I cracked the screen 2 times and i was eligible for an upgrade I went with the 5c and it's been a nightmare I have a cogeco email, which I've used for 14 years in business. Now I can't reply or com

  • Getting Images To Load On Web?

    Hi all, I have a question about how to get images to load in an applet once it is uploaded to a website. When I run the applet in JGrasp it works fine but if I try to open the applet in a web browser (via an html file on the hard drive) nothing loads

  • AP Down Payment Invoice Service

    Dear all, When I made an AP Down Payment Invoice Service, I want to choose Down Payment Clearing account from GL Account (row level), but when I browse the GL Account, there's no account appear. Anybody knows ? This is different with AP Down Payment

  • Same Image every time in JTextField with HTMLEditorKit and HTMLDocument

    Hi all I have a JTextPane with HTMLEditorKit as editorkit and HTMLDocument as document. I am trying to load an html file into the text pane. the html file contains image. When loading first time it is shown perfectly. After I change the image file wi

  • Where are custom pdf exports stored?

    I have a new computer and migration assistant was too assisting. I have many custom pdf exports for various uses. I am having trouble finding them on my old mac. Can anyone tell me where to look?