HTTP Version not supported

Hi,
My scenario is IDOC to Webservice.
I have done all design and configuration,
I used Receivere adapter as SOAP dapter.
When i am running the scenario i am getting following error.
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 505 HTTP Version not supported"
regards,
XI

Hi,
This happens when target service expects a specific version of the HTTP protocol (1.0, 1.1 etc) and client does not match this expectation ... Try to check if target requires a specific version (1.1 only for instance) whereas XI uses another.
Rgds
Chris

Similar Messages

  • SAP XI Error HTTP 505 HTTP Version not supported

    Hello Everybody,
    I have IDOC(sender) to WEBSERVICE(receiver) scenario.
    Our server is XI System version "SAP J2EE Engine 6.40 PatchLevel 105424.313".  Webservice has generated in MS Sql Server 2005 and publish in MS IIS server.
    I  downloaded webservice schema in external definitions. and i mapped with idoc fields. When i try to  Test Configuration in integration directory, everything is fine.
    But when i test to scenario, it doesnt work. I checked logs in integration engine monitoring. I got
    this error " com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 505 HTTP Version not supported"
    does anyone have any idea for that error? what should I do for run the this scenario?
    Kind Regards,
    Rasim

    You may first contact your receiver partner for the HTTP version they support. There is a mismatch somewhere.
    http://www.checkupdown.com/status/E505.html
    Regards,
    Prateek

  • Using Netbeans with Axis 1 shows HTTP Version Not Supported

    Hello,
    I need to use Axis 1 with Netbeans. So i have integrated Axis 1 in build.xml file to use axis ant targets. If i am executing the deploy target:
        <target name="AdminClientDeploy" description="adminClient" depends="validate">
            <java classname="org.apache.axis.client.AdminClient" fork="yes"
                  dir="." classpathref="${classpath_id}">
                <classpath>
                    <pathelement location="${build.classes}" />
                </classpath>
                <arg value="-l ${service.url}/servlet/AxisServlet"/>
                <arg value="${basedir}\src\${service.java.path}\deploy.wsdd" />
            </java>
        </target>It shows
    running Apache Axis Admin client
    Processing file D:\\Axis1WS\src\java\axis1\deploy.wsdd
    Exception: AxisFault
    faultCode: {http://xml.apache.org/axis/}HTTP
    faultSubcode:
    faultString: (505)HTTP Version Not Supported
    faultActor:
    faultNode:
    faultDetail:
            {}:return code:  505
            {http://xml.apache.org/axis/}HttpErrorCode:505
    Java Result: 1
    BUILD SUCCESSFUL (total time: 1 second)I have no idea whats the problem, but i think it's a configuration problem with netbeans. The compilation itself shows no problem. Please let me know, if you have some experience and especially if you know this problem.
    Thanks
    Alex

    Hello, problem is because of following part:
    <!-- The URL of the Web SERVER + Application Name -->
    in the tutorial, there is a space in URL, when you remove this space, problem disappear;
    <property name="service.url" value="http://localhost:8084/${ant.project.name}"/>

  • RisPort Help~ HTTP Version Not Supported

    Hi,all~
    I'm trying to get a realtime information(Phone ip address) by AXL RisPort,but i get a error: "HTTP Version Not Supported",it is so strange~!
    i have added a web reference(https://<myCmServer>:8443/realtimeservice/services/RisPort?WSDL) on my web site with VS2005(C#).
    help me~Thanks a lot.

    Thanks for your reply,
    This really works.
    But the problem now is in
    RisPort web service's Method,
    SelectCmDeviceResult SelectCmDevice(ref string StateInfo, CmSelectionCriteria CmSelectionCriteria);
    i don't know what's initialize value of StateInfo,so i make it null,but the response of SelectCmDeviceResult.CmNodes is null,so i can't get any realtime information. can you help me?
    there is my source code:
    CM5WebReference.RISService myRis = new CM5WebReference.RISService();
    ServicePointManager.ServerCertificateValidationCallback = new System.Net.Security.RemoteCertificateValidationCallback(ValidateServerCertificate);
    CM5WebReference.CmSelectionCriteria csc = new CM5WebReference.CmSelectionCriteria();
    myRis.Credentials = new NetworkCredential("CCMAdministrator", "passwrod");
    ServicePointManager.Expect100Continue = false;
    myRis.SoapVersion = System.Web.Services.Protocols.SoapProtocolVersion.Soap11;
    CM5WebReference.CmSelectionCriteria cmSelection = new CM5WebReference.CmSelectionCriteria();
    string stateInfo = ""; //is null? or....
    csc.Class = "Any";
    csc.Status = "Any";
    csc.SelectBy = "Name";
    CM5WebReference.SelectItem selectit = new CM5WebReference.SelectItem();
    selectit.Item = "AppIpAddr";
    CM5WebReference.SelectItem si = new CM5WebReference.SelectItem();
    si.Item = "Name";
    CM5WebReference.SelectItem[] sis = new CM5WebReference.SelectItem[2] { selectit,si };
    csc.SelectItems = sis;
    CM5WebReference.SelectCmDeviceResult a = myRis.SelectCmDevice(ref stateInfo, csc);
    cmselectCri.SelectBy = "Name";
    cmselectCri.Class = "Any";
    if (a.CmNodes != null) //always null,it's so strange...
    CM5WebReference.CmNode[] cn = a.CmNodes;
    CM5WebReference.CmDevice[] cd = cn[0].CmDevices;
    string ip = cd[0].IpAddress;
    my entironment:
    CM 5.0.4.1000-1
    vs2005(C#)

  • Utl_http status_code: 505 - HTTP Version Not Supported

    Hi there,
    I am trying to make a call to tomcat servlet and keep getting error:
    status_code: 505
    reason_phrase: HTTP Version Not Supported.
    here is my code.
    utl_http.set_response_error_check(false);
             utl_http.set_detailed_excp_support (enable => true );
              OE_DEBUG_PUB.Add('**HTTP_POST: Content Type: ' || P_CONTENT_TYPE);
              OE_DEBUG_PUB.Add('**HTTP_POST: P_URL: ' || P_URL);
            -- Begin the post request
            l_http_req := utl_http.begin_request (P_URL);
            --l_http_req := utl_http.begin_request(P_URL, 'GET','HTTP/1.1'); - I even tried this. it did not worked.
            --l_http_req := utl_http.begin_request(P_URL, 'GET','HTTP/1.0'); - I even tried this. it did not worked.
            --l_http_req := utl_http.begin_request(P_URL, 'POST','HTTP/1.0'); - I even tried this. it did not worked.
            -- Set the HTTP request headers
            utl_http.set_header(l_http_req, 'User-Agent', 'mozilla/4.0');P_CONTENT_TYPE is: P_CONTENT_TYPE IN VARCHAR2 DEFAULT 'application/x-www-form-urlencoded'
    P_URL is : http://myurl/getRates?weight=65.8&fromProvince=ON&fromPostalCode=L6S 6B7&toProvince=ON&toPostalCode=M5S 1X9&shipDate=2010-07-15
    Can someone please help me how to resolve it?
    Thanks.

    [email protected] wrote:
    Can you suggest something? I would test using telnet on the Oracle server itself - just to make sure connectivity is as expected (and a proxy server or firewall for example answers instead of the intended web server).
    e.g.
    telnet webserver 80
    And when getting the web server response, you can send a HTTP 1.0 get, i.e.
    GET /getRates?weight=65.8&fromProvince=ON&fromPostalCode=L6S  6B7&toProvince=ON&toPostalCode=M5S 1X9&shipDate=2010-07-15 HTTP/1.0
    Or play around with variations of the URL. See if you can access to the root page.
    The interesting bit would be the full header response from the web server. If the Oracle server is Windows, install something like putty instead of using that pathetic telnet client from Microsoft.
    Another option would be to install Firefox and a http header/viewer plug-in. Very nice as this does the telnet thing for you, but with proper browser support and allows you to see the exact details of the HTTP conversation (headers included). If the Oracle server is Linux/Unix, you can easily do this from your desktop by starting a vncserver session on the Oracle server and using vncviewer from your desktop to access that server desktop GUI and running Firefox.
    If there are anything funky in the way the browser and web server communicates (HTTP header and version wise), the Firefox-plus-plug-in is likely to shed some light on it.

  • HTTP 501 Not Implemented or HTTP 505 Version Not Supported

    when trying to post on the ABAP Forum, i am getting the following:
    The website is unable to display the webpage
    HTTP 501/HTTP 505 
       What you can try:
         Go back to the previous page.
         More information
    This error (HTTP 501 Not Implemented or HTTP 505 Version Not Supported) means that the website you are visiting doesn't currently have the ability to display the webpage, or support the HTTP version used to request the page.
    For more information about HTTP errors, see Help.
    i have tried from firefox, chrome and IE and unable to post.. i may look stupid and this may work here!  lol!
    but i have been trying for several hours to post a question on the ABAP forum...  :o(

    You have been "bagged" by SAP Security's cross site scripting filter. No way around it (for obvious reasons). Somewhere in your post there is something that is interpreted as an xxs attack. Unfortunately, happens a lot when trying to post code or code terms. Some people have managed to work around this using some of the same tricks used by people wanting to post forbidden words and phrases like
    myemal at sap dot com
    j a v a s c r i p t
    and the like. Try some experimenting and you might succeed.

  • My Ipod says version not supported when attaching to my Honda

    I just purchased a Honda Insight and hooked my iPod up to the USB port and it was working fine.  I brought my ipod inside and hooked it up to my macbook added several songs and may have upgraded the software.  Now when I hook it up to the USB in the Honda it says version not supported.  Is this an iPod issue or is this something that I need to address with Honda.
    Thanks,
    SASGeek
    Falmouth Maine

    What iPod firmware version does the Honda say it will support on the iPod?

  • Oracle version not supported(Urgent !!)

    We get the following error with IBM Websphere 3.5. The oracle version is 8.1.6 and the jdbc classes used are classes12.zip.
    EJBs are working fine but after the no. of connections exceed 40 in no.the following error occurs.
    ORA-17441=Oracle Version not supported. Minimum supported version is 7.2.3

    contact ibm about this websphere problem.

  • Oracle version not supported

    Hi All,
    i am having one issue while conntecting oracle version 8.1.7.0.0 from version 11.1.0.7.0 it is showing version not supported.
    ORA-03134: Connections to this server version are no longer supported.
    can we downgrade oracle version 11.1.0.7.0 client to 10g client on HP -Unix 64 bit operating system, if yes what is the detailed procedure.
    thanks in advance
    Regards
    Mirza

    In case of client software simply install the older version in a new ORACLE_HOME, there are no downgrade actions like for a database server. But I think even 10g won't work for 8.1.7.0.0, you need at least 8.1.7.4 .
    Werner

  • Http-GET not supported

    hi
    I have a small problem.... whenever I write more than 2 methods in a webservice
    and try to test them, I get an error message saying that Http-GET not supported??
    any ideas??

    Hello,
    There are lots of examples available that export multiple methods. See:
    http://65.193.192.35:7001/base/SoapInteropBaseService
    Could you post your code and we can take a look?
    Thanks,
    Bruce
    Prashant Yadav wrote:
    >
    hi
    I have a small problem.... whenever I write more than 2 methods in a webservice
    and try to test them, I get an error message saying that Http-GET not supported??
    any ideas??

  • Mac mini server suddenly says 'server version not supported'

    Just bought a mac mini server with Lion Server installed a couple of days ago and it has suddenly declared that the server version is not supported and will not allow me to re access the server from the Server App. I don't have any data that I need to recover as I am still experimenting with the set up. Is there away to reset this or do I have to do a clean install? Please advise if you can?

    Exact same issue here....
    mac Mini 2011 model.
    came with Lion installed on it.
    downloaded Server from the app store. installed and worked great.
    updated the "server" to 10.7.1.
    then i decided to delete the server.
    now, when i try to re-install, it says server is not support.
    its because the OS X client is now at 10.7.1 and the server install is looking for 10.7.0
    i think i am going to have to re-install Lion client and try again.

  • I cannot buy anything on my iphone 5(v.6.0.2) and it say itune version not support this purchase. or itune not install correctly.do i need to update IOS version?

    can anyone tell me why?it just say : Your Purchase Could not be completed
    Purchase Failed : Your Itunes version does not support this purchase, it was not installed correctly. or you're not sign into a itunes account.
    why?
    or i need to update latest IOS?

    Try to do a reset, if it doesn't work try remove recently added apps this may solve your problem ( like google app because it has happened with me)
    Take a look at apps using your location service in privacy, it can cause battery draining.

  • Samba version not supported

    I have a Buffalo NAS and used to be able to mount the drive and browse natively within a previous version OS X (not sure after what upgrade it broke) natively without using a 3rd party application. I run 10.8.3 on all of the machines now and when attempting to mount the share I get a the error "There was a problem connecting to server <blah>. The version of the server  you are trying to connect to is not supported." I just checked with a 2006 MB Pro version 10.6.8 and it works flawlessly. Any ideas what has changed between Snow Leopard and Mountain Lion? Any suggestions for a great 3rd party application that will allow full view/preview capability?

    How did you buy the Applecare Plan?
    If you bought it online from the Apple Store with the computer then it will already be activated.
    Otherwise there should be instructions in the booklet that came with the Applecare package.
    Ian

  • I am getting no HTTP proxy not supported error when I try to open HBOGo App on my iPad

    When I try to open my HBOGo or MaxGo apps on my iPad, I am getting an error that states "Your current HTTP proxy is not supported by this application.  Plese remove it from your Wi-Fi settings to enable video playback".  I have reset the iPad, deleted and reinstalled the Apps, synced my iPad.  My Wi-Fi settings are defaulted to off.  Any help would be appreciated.  Thanks.

    To all that are getting the http proxy message when trying to view hbogo, Deggie has the right answer: go to wifi settings, when you find your wireless connection tap the arrow on the right and if proxy is on "auto" switch it to "off." I had been watching hbo go just fine then suddenly I got this message about http proxy does not support video playback, I did as Deggie suggested and Bingo.

  • Removing Flash Version not supported

    Whenever I go to buzzword it tells me that Flash 10 is not
    yet supported and I then have to click the link at the bottom to go
    into buzzword. Is there any way I can get buzzword to bypass the
    not supported page on my computer so that I can go straight into
    buzzword through a preference option.

    Good news!
    Buzzword now supports
    Flash
    Player 10 (beta 2); we have removed the Unsupported Flash
    Player warning.
    We are interested in any reports of unusual/unexpected
    behavior that our FP10 users are seeing; please post them here or
    email them to
    [email protected]

Maybe you are looking for

  • How do I add a digital signature to my online form?

    With regular Adobe (Standard or Professional) software, you can add a digital signature line.  I want to know how I can do it on FormCentral. When I PDF the form I created on FormCentral and try to add the digital signature in Adobe, I get a message

  • IPhoto hangs, found Console message

    Though I'm a Mac user for over 10 years, I'm no good when deciphering Console jargon or attempting a Terminal command.  My iPhoto has (as well as most everything else with Mavericks) been unusually slow when opening, importing, changing folders, edit

  • Is there any way to use a file transfer protocol to upload files to icloud?

    Is there any way to use a file transfer protocol to upload files to icloud?

  • Camera connection kit and photo stream

    As many people nowadays, I don't carry a digital camera with me all the time, and most of my casual photographs are taken with my cellphone, which happens to be an iphone 4. Since the introduction of photo stream, the process of organizing the digita

  • Survey response email parameters

    hello, how can I find out what the address is where the response of a survey have to go? The answers of the survey don't receive the survey evaluation. In the xml parameters of the survey repository. where in the system can I find that address for th