HttpException Server name cannot be resolved

Within an application we need to connect via HTTPS using the server URL rather than the IP address as the certificate references the domain.
We always get the following error 'org.w3c.www.protocol.http.HttpException: The host name [gecwinfinite.com] couldn't be resolved. Details: "gecwinfinite.com"'
Via the browser we can connect to the server using the URL.
Any assistance would be appreciated

I have seen similar problems where reverse DNS was required by Java. Ensure you can perform a reverse DNS on the IP Address and try it again.

Similar Messages

  • Server name cannot be resolved using VPN connection

    I've just installed Windows Server 2012 and Exchange 2013. I previously was using Windows SBS 2008 with Exchange 2007 and I was able to connect to the server via VPN and create an Outlook account and connect to the Exchange server no problems.
    Now with the WS2012 and Exchange 2013 everything is working fine but when I connect to the VPN from outside the network and try to create a new Exchange account in Outlook, I get the error "The name cannot be resolved. The connection to Microsoft Exchange
    is unavailable. Outlook must be online or connected to complete this action."
    When I'm on the VPN I can ping both server name and IP address no problems so that isn't the issue. I've searched the net and tried multiple things including turning off firewall on both sides.
    To clarify my setup I have two WS2012 servers. One is DC and VPN server, other is Exchange 2013 server which has both CAS and Mailbox roles.
    I have a suspicion that the issue is to do with certificates. I don't have a valid bought SSL certificate, I am just using self-signed certificate. Can anyone verify that this is the issue or could it be something else?
    Thanks.

    Hi,
    Since you don't have a valid SSL certificate, you can try to manually configure Outlook to connect to your Exchange server by the following steps:
    Go to your Outlook mail settings from Start > Control Panel > Mail > Show Profiles > Add.
    If you cannot locate the Mail icon in Windows Control Panel, turn on Classic View (click
    Classic View on the left side of the Control Panel window). 
    Specify your Profile Name and click OK.
    On the Auto Account Setup page, select Manually configure server settings or additional server types and then click
    Next.
    On the Choose Service page, select Microsoft Exchange or compatible service and click
    Next.
    On the Server Settings page:
    - Specify your Server FQDN as Exchange server name (you can find it in HostPilot® Control Panel >
    Users & Services > Advanced Settings).
    - Type your Exchange Mailbox Username (email address). 
    - For the Offline use option, make sure that Use Cached Exchange Mode is selected.
    - Click the More Settings button and switch to Connection tab.
    - In Outlook 2013 you can specify the time period for which email items will be kept offline.
    Select the Connect to Microsoft Exchange using the HTTP option and click the
    Exchange Proxy Settings button.
    -Specify Exchange proxy settings.
    -Type the URL for your proxy server in the Use this URL to connect to my proxy server for Exchange field. 
    You can find the correct URL in HostPilot > Users & Services > Advanced Settings.
    -Make sure that both the options On fast networks and On slow networks are checked.
    -In the Proxy authentication settings box, choose Basic Authentication.
    If you want to have Outlook save your password, read the Knowledge Base article on
    How do I save my Outlook Password? for more information.
    Click OK, then Apply, then OK
    to return to the Add New Account window. Click Check Name.
    If you have set everything up properly, you will see a window requesting authentication.
    Enter the complete primary email address as the username, and enter the password for the mailbox.
    If you have entered the username and password correctly, the username will now be underlined, and the entry in the Microsoft Exchange Server field will also be underlined.
    Note: If your server is Exchange 2013 the server name will get underlined and will resolve into a name that looks like
    [email protected].
    Such a conversion is expected behaviour for Exchange 2013 mailboxes.
    Click Next, then Finish, then OK to save changes.
    Start Outlook and log in, using the same credentials as in step 9.
    ▲ Vote if Helpful / Mark if Answer
    MCSE: Messaging 2013 Charter / Private Cloud / Server Infrastructure
    MaximumExchange.ru

  • Cannot start Outlook 2013: "name cannot be resolved" / "connection to Microsoft Exchange is unavailable" / "___.ost is not an Outlook data file (.ost)"

    My work e-mail has a double-login system, where my credentials for work access are one username and my e-mail is an alias of that first username, so they differ from one another. I suspect that's why I've been having the hardest time with Outlook 2013. I
    was able to add my account just fine once but changed my mind about using Outlook and removed the account. Now I can't get back into Outlook for the life of me. The error messages that show up are:
    1. It asks me to verify server and Mailbox. I've tried it with both usernames (the official work username and the e-mail alias) as my Mailbox info, followed by the email domain (even tried it without the domain) and it still won't verify when I click "Check
    Name".
    2. This message comes up: The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
    3. Then once I click "OK" another pop-up says: Cannot start Microsoft Outlook. The file C:\Users\FirstLastname\AppData\Local\Microsoft\Outlook\FirstLastname.ost is not an Outlook data file (.ost).
    Help?

    Hi,
    As per this KB article, the issue might occurs when some required registry key does not exist on your computer. 
    Please try the steps mentioned in it and see if it is helpful to you:
    http://support.microsoft.com/kb/2264398/en-us
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Name cannot be resolved

    hi,
    how to modify this code?to solve name cannot be resolved error.
    function ValidateUsername(formobj)
    var name=formobj.username.value;
    alert(name);
    <%
    UserDAO userDao = new UserDAOHibernate();
    Integer userID = userDao.getValidUserForForgotPassword(name);
    %>
    }

    Glad you fixed it, but in the future please post compilation errors in the 'New to Java' forum.

  • Server Name cannot be blank

    HI Every one.
                       This is prasad working on sap xmii with sql server 2005.I am having problems to add or update the table using query templates.When i am updating a table with data I am getting the sql error as server name cannot be blank.It is working fine in Sap Xmii11.5 but in Sap Xmii 12.0 iam getting this error.Can any help on this issue.
    Thanks,
    Prasad.

    Server name cannot be blank errors mean that you are either referencing a display template or a query template that does not have a server property saved in it such as:
    /XMII/Illuminator?QueryTemplate=Defaults/TagQuery
    /XMII/Illuminator?QueryTemplate=Defaults/iChart
    Double check the path to your template and confirm that it's a valid query template including a Data Server.

  • The host name cannot be resolve ? ( with linksys router )

    Hi all, I have some problem with setting up a network. I tried to set my network according to http://wiki.archlinux.org/index.php/Configuring_network   the network/internet is fine except the host name with "http://" cannot be resolve. For example
    ping 216.239.61.104
    ping www.gogle.com
    both work fine, until I try,
    ping http://www.google.com
    it give me error, tell me that the hostname cannot be resolved. I tried to config my network using both dhcp or fix-ip, but the problem still present in both way. Internet works fine in windows/ubuntu.
    Anyboy has any clue ?  The router I use is wrt54gl with tomato firmware.
    thanks in advance.

    kowalski wrote:
    Hi,
    if pinging www.google.com works then dns resolving _does_ work. Why would you want to ping http://something?
    You should try opening http://whatever in a browser not pinging it from command line.
    Or am I missing something obvious?
    Yes, for instance, all mirror list for pacman is in "http://...." or "ftp://...." form. I could easily change the repository list, but I'm not sure if it'll have same problem in future with other program.  Also, if it work in ubuntu and windows, why not arch.

  • Class name cannot be resolved to a type

    Dear All,
    I have one main class calling another class but I keep getting this error "
    SMSClient cannot be resolved to a type". Before this I tried on other pc it was ok. Below is part of the codes. What could have been wrong? Can it be a missing library but how to trace that?
    public class callSMSClient{   public static void main(String[] args)  {       
              SMSClient t1 = new SMSClient(0);       
              t1.sendMessage("+6065544223","testing one two");  }}public class callSMSClient
              public static void main(String[] args)
           SMSClient t1 = new SMSClient(0);
           t1.sendMessage("+6065544223","testing one two");
    public class SMSClient implements Runnable{  
    public final static int SYNCHRONOUS=0; 
    public final static int ASYNCHRONOUS=1; 
    private Thread myThread=null;  
    private int mode=-1; 
    private String recipient=null; 
    private String message=null;  
    public int status=-1; 
    public long messageNo=-1;   
    public SMSClient(int mode) {     
    this.mode=mode;   
    public int sendMessage (String recipient, String message)
          this.recipient=recipient;   
          this.message=message;  
          myThread = new Thread(this);   
          myThread.start();
          //    run();   
          return status;   
    public void run()
    Sender aSender = new Sender(recipient,message);    
    try{     
    //send message         
    aSender.send ();         
    // System.out.println("sending ... ");      
    //in SYNCHRONOUS mode wait for return : 0 for OK, -2 for timeout, -1 for other errors     
    if (mode==SYNCHRONOUS)
    while (aSender.status == -1)
    {            myThread.sleep (1000);         
    if (aSender.status == 0)
    messageNo=aSender.messageNo ;   
    catch (Exception e)
    {         e.printStackTrace();    
    this.status=aSender.status ;    
    aSender=null;   
    }public class SMSClient implements Runnable{
      public final static int SYNCHRONOUS=0;
      public final static int ASYNCHRONOUS=1;
      private Thread myThread=null;
      private int mode=-1;
      private String recipient=null;
      private String message=null;
      public int status=-1;
      public long messageNo=-1;
      public SMSClient(int mode) {
          this.mode=mode;
      public int sendMessage (String recipient, String message){
        this.recipient=recipient;
        this.message=message;
        //System.out.println("recipient: " + recipient + " message: " + message);
        myThread = new Thread(this);
        myThread.start();
    //    run();
        return status;
        public void run(){
        Sender aSender = new Sender(recipient,message);
        try{
          //send message
              aSender.send ();
             // System.out.println("sending ... ");
          //in SYNCHRONOUS mode wait for return : 0 for OK, -2 for timeout, -1 for other errors
          if (mode==SYNCHRONOUS) {
              while (aSender.status == -1){
                myThread.sleep (1000);
          if (aSender.status == 0)
             messageNo=aSender.messageNo ;
        }catch (Exception e){
            e.printStackTrace();
        this.status=aSender.status ;
        aSender=null;
    }

    Dear Ejp,
    I would like to first share a simple case here first. Below is the simplied codes. Here I dont need any import statement. I keep both this in the same directory. I am using this command to compile javac callSMSClient.java. Why even this simple case is not working?
    public class callSMSClient{
      public static void main(String[] args)
           SMSClient t1 = new SMSClient(1);
           t1.sendMessage("+6014466044","testing one two");
    public class SMSClient {
      private int mode=-1;
      private String recipient=null;
      private String message=null;
      public SMSClient(int mode) {
          this.mode=mode;
      public void sendMessage (String recipient, String message){
        this.recipient=recipient;
        this.message=message;
        System.out.println("recipient: " + recipient + " message: " + message);
    }

  • The name cannot be matched to a name in the Address List

    Hi,
    I checked several posts but no luck.
    Problem: We currently have Exchange 2010 and 2003 co-existence, busy migrating to 2010. We have several domains as well. A problem came up in one of our remote access domain where we have Citrix running. After the user has been moved to the new 2010 server
    and you re-create their mail profile in Outlook 2010 then it will give the following error:
    The name cannot be resolved. The name cannot be matched to a name in the address list.
    A popup box appears with the server name exch2010cas.domain.local and the mailbox field =SMTP:[email protected] When you click on Check Name the error keeps popping up. When I change the server to exch2003.domain.local though and click Check Name the
    mailbox gets underlined and the servername changes back to exch2010cas.domain.local in the exchange server textbox.
    I'm pretty sure it must be an AD or DNS problem somewhere but I'm not sure where? I did add some domain suffixes to the new Exchange server so it can resolve hostnames in the local and remote domain. I also looked at the GAL and the entries for the user
    is in there. I'm not sure if it might have something to do with LegacyExchangeDN value either?
    I appreciate any help, thanks.

    Hi,
    I recommend the following troubleshooting:
    1.Verify that the Active Directory account that you use either to create the client profile or to log on to the mailbox has been mailbox-enabled.
    2.Verify that the user can use the Active Directory account to view sibling objects in the Users container (or in the Active Directory organizational unit that contains the user account).
    3.Verify that the user account has been stamped by the Recipient Update Service after you mailbox-enable the user account.
    4.Verify that the user can see both the Global Address List objects that are listed in the
    showInAddressBook attribute and the members of the Global Address List using Ldp.exe
    5.Log on as an administrator, and then verify that there are no duplicates in the
    addressBookRoots attribute of the Microsoft Exchange object under <var>Domain</var>,cn=Configuration,cn=Services
    For more detail steps, you can refer to the following article:
    http://support.microsoft.com/kb/297801/en-us
    Thanks,
    Angela Shi
    TechNet Community Support

  • Unable to resolver server name

    when I open a terminal window and type ping followed by existing server name it says "cannot resolve reference: unknown host"
    if I do the same thing on a PC it all works!
    Why can't a MAC find other computers connected on the same network
    It such a basic thing, It almost make the imposable to us a mac. One way other people use to get around this problem is to run windows on a mac instead, But I don't understand why.

    Check out this link - http://discussions.apple.com/thread.jspa?threadID=2496619&tstart=15
    It might assist in isolating/troubleshooting the issue. Can you ping via Network Utility? Did you try and DNS cache flush?

  • " the volume for (file name) cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again."

    I get an error message in iPhoto when I click on thumbnails of pictures in certain albums. It reads 'the volume for "(file name)" cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.'  What does this mean and how do I fix it?

    It means that you imported the files in Referenced mode and have now remvoed them from the Mac. Put the disk or card back.
    For more on iPhoto and file management see this User Tip:
    https://discussions.apple.com/docs/DOC-6361

  • New install Express on Win 8 can see the Server name but cannot see the instance

    I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
    The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
    The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
    I am looking for clues as to what may cause the instance name to not appear
    thanks in advance
    jnc

    Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
    What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
    jnc
    Hi jnc,
    Could you please verify that if  the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
    If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
    SQL Server\Instance Names).
    To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
    However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
    Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Exchange 2013 mailbox name resolving vs. exchange server name (mailbox rule)

    Hello guys,
    I am running exchange 2007 and exchange 2013 CU7 in hybrid mode, while internal autodiscover a record is pointing to exchange 2007 client rule server.
    When I configure outlook mailbox located on exchange 2007- I can use autodiscover using mail address ore resolve mailbox name vs. exchange server name.
    When I configure outlook mailbox located on exchange 2013- I can configure it only using autodiscover mechanism ( email address - next- next etc.).
    We are using EMC backup software which works with MAPI. Since I wasn't able to restore granular mailboxes, I contacted EMC and they claimed that it's very important to configure mailboxes resolving.
    What should I check and configure to make it work?

    Hi,
    I think if we want to browse single mailbox by backup software, it will be regard to resolve mailbox name using server name, I suggest you contact  EMC supplier to improve it.
    By the way, they I type mailbox name which located on exchange 2013 server database and typing exchange 2007 cluster name, server name of exchange 2007 cluster changes automatically to exchange 2013 server on which this mailbox located.
    A: first, we should make sure cluster was worked without any problem. Then make sure Exchange 2013 mailbox server was included in cluster.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Scan to Email Error Message "cannot connect to server. check server name and address"

    I have a HP Officejet Pro 8600 Plus. 
    I've been using this printer for several months.  Now am getting an ERROR message when I try to scan to email that it "cannot connect to server. check server name and address" 
    I'm not sure how to check this.  We can all still print remotely via the internet connection. 
    Anyone have any ideas?

    Thanks for the info.,
    Did you recently change your operating system or network router that started to cause this error?
    Check out this thread - http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Configuring-quot-Scan-To-E-mail-quot-on-HP-...
    You may also need to change the printer DNS settings manually - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-8500-Scan-to-Email-setup-cant-conne...
    Thanks

  • Outlook no resolving Exchange Server name , resolving another name like SID Object

    Hello All ,
    I Have Exchange 2013 installed on windows server 2012 , Outlook no resolving Exchange Server name , resolving another name like SID Object . Please see the attached file below .
    how can fix the issue ?
    Thank you

    Hi,
    Please run following command to verify whether the Outlook resolved the correct Exchange Server GUID:
    Get-Mailbox MailboxName | FL name, ExchangeGUID
    Following Screenshot is the test result in my lab, for your reference:
    If we get the correct GUID, it means we have already connected to Exchange Server successfully.
    The GUID format for the server name in Exchange 2013 is an expected behavior.
    Found a similar thread for your reference:
    Outlook is not resolving CAS server Name
    http://social.technet.microsoft.com/Forums/exchange/en-US/5868d45a-ee93-4c55-927b-4dd2b9eaeec5/outlook-is-not-resolving-cas-server-name?forum=exchange2010
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Failed to Publish: Native Error: Server name or address could not be resolved

    I'm trying to publish my RoboHelp HTML project to our server
    (dentiis01). I get the following error:
    "Warning: Failed to publish to "dentiis01". reason:
    Connection failed. Please check the connection and post again.
    Native Error:The server name or address could not be
    resolved."
    (Note: The person who originally published the project has
    left the company, so I'm not sure what options he specified).
    I have tried substituting the IP address for the server. I
    have also tried specifying with and without the port number (8000
    in our case). I can successfully ping the server using either the
    host name or IP address. I can view the current RoboHelp content
    via a browser. So, it appears the engine is running properly.
    Please let me know if you have any suggestions.
    Thanks.

    I resolved my problem. I was trying to publish from "WebHelp
    (Primary Layout)" instead of "WebHelp Pro". Now the publish
    operation seems to be working fine.
    Thanks,
    Greg

Maybe you are looking for

  • DatePicker problem in JSf

    Hi, I am using RAD for developing JSF Pages which is internally uses JSF1.0. For Some date fields i am using DataPicker for picking dates. And deploying under Websphere 6.1. I am unable to open Datepicker in JSF Page with backing bean due to some par

  • GPRS/GSM Signal Booster

    Can anyone recommend a GPRS/GSM signal booster solution? I am looking to boost the GPRS/GSM signal in a sports hall to help service chip n pin transactions. I have looked into getting analogue lines installed and other alternatives but this seems to

  • Autofill primary key with another field

    I have 2 fields: DISTRIB_CODE ex. ABC DISTRIBUTOR ex. ABC COMPANY I want the DISTRIB_CODE to be the primary key, but I cannot do that because DISTRIB_CODE occasionally changes. So, I think I thought of a way to work around it: DISTRIB_ID (PK constrai

  • Get-csRgsWorkFlow command does not return result if you are using remote shell

    I am connecting to Lync server remotely using windows powshell. When I issue the command locally from the Lync server, I get the correct response. When I do the same command from the remote shell, I get empty response. Can you help me why this is hap

  • No userstore Active in trc file

    Hi all, i need some big help here.. im upgrading my Java server from 640Sp19 to 7.0sp13.. ( the installation default is SP9 then i have put it SP13 to the epsinbox of the jupgrade ) my Os is Aix 5.3ML6 my DB ora 10.2.0.2 now my jupgrade is in START_J