HTTPS Config in XI

Hi Guys,
I've a scenario SOAP-Proxy and then, XI makes a HTTPS Post on a specific server of the Business Partner. I am using the XI adapter on the receiver side.
I've created a HTTP Destination (type G) on SM59, set it to use SSL at Logon & Security tab, using the DFAULT ssl client(that i've created at STRUST transaction).
The problem is when i try to TEST the connection, an successful textless message appears in the bottom and nothing happens! The server that will receive the request doesn't receive nothing when it occurs.
any help would be really appreciated
Thanks,
Raj

Hi Sarvesh,
I tried that and i am getting ICM_HTTP_CONNECTION_FAILED.
I have also configured for the HTTPS Port in the profile and HTTPS port i am using as 1443. I could not see HTTPS port under SMICM or SICF. I see only SICF.
any help would be really appreciated
Thanks,
Raj
Message was edited by:
raj reddy

Similar Messages

11.1.2.3 multiple node install, not using a shared location for HTTP config files

I finished, as best as I could a three server install of 11.1.2.3; foundation server with Workspace, R&A, EPMA, Essbase tools, an Essbase only server, and a Planning server. I did not use a 'sharedlocation (Advanced link in HTTP screen) for the servers. My question is; 'What needs to be done to complete the configuration, as Planning Administration does not show up in Workspace?' It is possible to re-configure HTTP to a 'sharedLocation' after the install and config tasks are done?
Thanks,

You can configure the OHS shared location at any point
Cheers
John
http://john-goodwin.blogspot.com/

HTTPS config in 7.1?

Hi Guys,
I have configured for ssl but i was trying to match the port number to the server certificate as we do in PI 7.0 under service " ssl provider ". I could not find this in PI 7.1.
any help would be really appreciated
Thanks,
Srini

Hi,
Refer
http://help.sap.com/saphelp_nw04s/helpdata/en/e8/1f1041a0f6f16fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
Thanks
swarup

HTTPS config in SOAP receiver adapter ?

Hi Guys,
I have configured the soap receiver adapter with the URL
*https://xxxx.abcd.com/xyzv/bbbb.asmx with the user authentication *
I have tested the url and the user and pw in the browser and they are working fine but the messages are failing the soap receiver adapter with the 401 unautorized error as the message from the Audit log in the RWB.
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized. Setting message to status failed.
Do i need to configure the Java Stack for HTTPS ? The communicaion is between the XI system and a third part system internally.
any help would be appreciated ?
Thanks,
Srini

Hi Guys,
I have solved the problem and NTLM works with PI 7.0 but we need to configure soap axis adapter
The Windows NTLM authentication is supported by Axis's CommonsHTTPSender handler and consequently it is supported by the Axis adapter's corresponding handler com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender. Read about How Can I use CommonsHTTPSender as the transport handler? if CommonsHTTPSender is not enabled on your system. Once it is enabled, you can use com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender instead of default com.sap.aii.adapter.axis.ra.transport.http.HTTPSender as the transport handler in the module configuration and set the authentication setting to NTLM and enter usename as domain\username in the channel configuration
To use CommonsHTTPHandler, the optional Jakarta-Commons-Net, Jakarta-Commons-HttpClient, Jakarta-Commons-Codec libraries are required. Make sure that these libraries are available for the Axis adapter at the deployment check page If these components are not available, you will need to include the corresponding jar files (commons-codec-1.3.jar, commons-httpclient-3.0.jar, and commons-net-1.0.0-dev.jar from the Axis 1.4 release) in aii_af_axisprovider.sda and deploy this archive (see How to prepare aii_af_axisprovider.sda?).
The provider.xml file must include the jar-name entries for these jar files, as shown in:
    <jars>
       <jar-name>commons-net-1.0.0-dev.jar</jar-name>
       <jar-name>commons-codec-1.3.jar</jar-name>
       <jar-name>commons-httpclient-3.0.jar</jar-name>
    </jars>
Once you do all the above settings, NTLM works fine
Thanks,
Srini

881W wireless http config page shows only "Enter" button

Hi,
I have new 881W router, the wired portion works like a charm, the wireless part not quite..
When using Cisco Config Pro to access wireless part of it. it suppose to open a browser so i can continue configuring wireless part. Unfortunately, when i click on Launch Wireless (or simillar), the browser opened the page and i have only button "Enter". When i click on it i got error on the page in bottom right corner of the IE, or nothing happened if i use Firefox.
Coudl someone shad some lights on this issue? I have been googling it and found some article about different IOS code for AP. That article did not apply to my case even dough symptoms were the same, downgrading to mentioned IOS version did not help.
Any suggestions appreciated.
Regards,

Hi,
This is a known bug on the embedded AP on the 881W -- CSCtc94776. It occurs on software version 12.4(21a)JA1 -- what version of software is running on your AP?
The recommended resolution is to upgrade the AP module (not the router) to version 12.4(25d)JA1.
The image name is :
ap801-k9w7-tar.124-25d.JA1.tar
And you can initiate the upgrade from the AP CLI:
archive download-sw /force /over tftp:///
-Patrick Croak
Wireless TAC

Https config

Hi
Can someone provide me with a link or info on how to configure my htmldb / Apache installation to use HTTPS ?
thanks
Bill

I found something on tahiti.oracle.com
for enabling ssl
its under Managing Security in the Oracle HTTP Server Administrator's Guide for 10g rel 1

Error in tomcat 4.1 https config

Hi all,
I have configured SSL on tomcat 4.1 using
keytool -genkey -alias tomcat -keyalg RSA
The security file is created. when accessing the site it says that there is a problem with the certificate. The following is the error:
The name on the security certificate is invalid or does not match the name of the site
Actually when configuring certificate it asked me for the details.
for the name, I wrote my name as Deepak Baran.
Should I use the site name here.
Please help me with this.
Thanx in advance...
Deepak

Yes

Cisco css http keepalive is not working with GET command

Dear all
i have Cisco Css connected to Dell Server (via switch)
Cisco CSS - 192.168.1.3 and Dell Server - 192.168.1.5
Dell server is setup with windows 2009R2 and Apache HTTPD is version 2.2
This server is dedicated to host multiple doamins with Apache lik
www.abc.co.uk
www.xyz.co.uk
Now the clinet wants to setup the http keepalive with specfic web page like /testpage.html for all these domains. i have teseed with single URI. it is working the comamnds are
config)# service serv1
(config-service[serv1])# ip address 192.168.1.5
(config-service[serv1])# keepalive type http
(config-service[serv1])# keepalive method head    ( get i have not used due to hash mismatch with apche server, if i use GET it is not working)
(config-service[serv1])# keepalive uri "/testpage.html"
(config-service[serv1])# active
It is working with single URI. but how can i do the same thing for multiple doamins ?
for multiple doamins do i need use script ? or can i use with commands ?
if i need to use script the script is
!no echo
! Filename: httptag-test
! Parameters: HostName WebPage HostTag
! Description:
!       This script will connect to the remote host and do an HTTP
!   GET method upon the web page that the user has asked for.
!   This script also adds a host tag to the GET request.
! Failure Upon:
!   1. Not establishing a connection with the host.
!       2. Not receiving an HTTP status "200 OK"
if ${ARGS}[#] "NEQ" "3"
        echo "Usage: httptag-test \'Hostname WebPage HostTag\'"
        exit script 1
endbranch
! Defines:
set HostName "${ARGS}[1]"
set WebPage "${ARGS}[2]"
set HostTag "${ARGS}[3]"
! Connect to the remote Host
set EXIT_MSG "Connection Failure"
socket connect host ${HostName} port 80 tcp
! Send the GET request for the web page
set EXIT_MSG "Send: Failed"
socket send ${SOCKET} "GET ${WebPage} HTTP/1.1\nHost: ${HostTag}\n\n"
! Send the HEAD request for the web page
set EXIT_MSG "Send: Failed"
socket send ${SOCKET} "HEAD ${WebPage} HTTP/1.1\nHost: ${HostTag}\n\n"
! Wait for a good status code
set EXIT_MSG "Waitfor: Failed"
socket waitfor ${SOCKET} "200 OK"
no set EXIT_MSG
socket disconnect ${SOCKET}sh w
exit script 0
in the script i have not used GET becasue, when CSS send GET request to apache it use hash, but apache is not able to respond with same hash and it shows that website is down. more information- click below url
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v7.40/command/reference/CmdKeepC.html#wp1139668
(config-keepalive) method
I have uploaded in CSS with httptag-test file and applied these commands
service comp.brit.co.uk-80
keepalive port 80
ip address 192.168.1.5
keepalive frequency 10
keepalive maxfailure 2
keepalive retryperiod 10
keepalive type script httptag-test "192.168.1.5 /testpage.html www.abc.co.uk
keepalive type script httptag-test "192.168.1.5 /testpage.html www.xyz.co.uk
but this script is not working
my question is:
1.do i need use script only to setup http keepalvie with webpage for multiple domains ?
2.with out using script is there any solution like CICSCO CSS commands to setup http uril for multiple domains which are on 1 singl server.
please help me asap

Hello Muhammad,
If you wish to use multiple domains for a URI keep-alive check, and perform a HEAD request what Daniel mentioned is correct. You have to use a scripted keep-alive check on the service. However, you should not use the default "ap-kal-httptag" script to do so as it's limited to only 1 website (unless you modify the script). You're best bet would be using the "ap-kal-httplist" script on the CSS as it allows the checking of 2 different websites along with a webpage to check for each site using HTTP HEAD method.
!no echo
! Filename: ap-kal-httplist
! Parameters: Site1 WebPage1 Site2 WebPage2 [...]
! Description:
!    This script will connect a list of sites/webpage pairs. The
!   user must simply supply the site, and then the webpage and
!   we'll attempt to do an HTTP HEAD on that page.
! Failure Upon:
!   1. Not establishing a connection with the host.
!   2. Not receiving a status code 200 on the HEAD request on any
!      one site. If one fails, the script fails.
! Make sure the user has a qualified number of arguments
if ${ARGS}[#] "LT" "2"
        echo "Usage: ap-kal-httplist \'WebSite1 WebPage1 WebSite2 WebPage2 ...'"
        exit script 1
endbranch
while ${ARGS}[#] "GT" "0"
        set Site "${ARGS}[1]"
    var-shift ARGS
    if ${ARGS}[#] "==" "0"
        set EXIT_MSG "Parameter mismatch: hostname present but webpage was not"
        exit script 1
    endbranch
    set Page "${ARGS}[1]"
    var-shift ARGS
    no set EXIT_MSG
    function HeadUrl call "${Site} ${Page}"
endbranch
exit script 0
function HeadUrl begin
! Connect to the remote Host
set EXIT_MSG "Connect: Failed to connect to ${ARGS}[1]"
socket connect host ${ARGS}[1] port 80 tcp 2000
! Send the head request
set EXIT_MSG "Send: Failed to send to ${ARGS}[1]"
socket send ${SOCKET} "HEAD ${ARGS}[2] HTTP/1.0\n\n"
! Wait for the status code 200 to be given to us
set EXIT_MSG "Waitfor: Failed to wait for '200' on ${ARGS}[1]"
socket waitfor ${SOCKET} " 200 " 2000
no set EXIT_MSG
socket disconnect ${SOCKET}
function HeadUrl end
Rather then modify the default "ap-kal-httplist" script on the CSS I would simply define the arguments within the service configuration itself.   Something like the following (using your service example):
service dell-192.168.1.5
ip address 192.168.1.5
keepalive type script ap-kal-httplist "www.abc.co.uk /testpage.html www.xyz.co.uk /testpage.html"
active
As long as the server is configured to reply to host headers, and the page is configured to retuen a "200 OK" the above service configuration should work. If there are any errors simply run "show service " to view why there was a failure. If there is a failure, and the output from the command specified shows a line number run the following command against the script to view at what point (line) did the failure occur:
show script ap-kal-httplist line-numbers
Hope this helps!
- Jason Espino

HTTP Adapter outbound (SSL) processing

I am trying to send a XML message (an Invoice) from XI to an external Customer via HTTP Adapter.
The site I am posting the message to is SSL.
I have installed the Customer's Certificate via STRUST under SSL Client (Standard) and can see it in the
certificate list.
Within the Communication Channel for HTTP Adapter I have tried Addressing Type of URL
and also with a HTTP (SM59) destination. Both do not work.
The setting used for both are
host : workflw.externalcustomer.xxx.com Service: 443
Path : /SubmitInvoiceUAT/SubmitInvoice.asmx/SubmitCXML
HTTP Proxy : internetproxy.mycompany.com
Proxy Servuce : 80
SSL Active : SSL Client Certificate ANONYM SSL Client(Anonymous). As no client cert is used for logon
I have attempted a connection test within SM59 for the HTTP Destination and I receive the error
ICM_HTTP_SSL_ERROR.
1) If the SSL Client Certificate ONLY for logon then how does XI know what cert to encyrption with?.
2) Should Verisign/Thawte etc CA certs be also installed in STRUST ?
Does that "public" key for encryption need to be placed anywhere (eg STRUST) or will XI just do
3) this when it does the handshake with the external HTTPS site it is posting to ?
4) Also the transaction STRUST may (or may not depending on how the documentation is interpreted) need the installation of some certs into its PSE (Personal Security Environment). But exactly what they mean is a mystery. I have created what I thought was the servers cert but cannot see to create a dev.connector.boc.com named certificate. Perhaps that is not needed.
Here is the help <a href="http://help.sap.com/saphelp_nw70/helpdata/en/e8/1f1041a0f6f16fe10000000a1550b0/frameset.htm">SAPHelp on PI HTTPS Config</a>
5) Also OSS note 510007 it advises to check a number of settings. I have had a look at what I can ..namely via transaction RZ10 and I can see one parameter and should that be changed to include a HTTPS ? .i,e currently it is set to     <i>icm/server_port_0 PROT=HTTP,PORT=80$$,PROCTIMEOUT=3600</i>

Hello
As a process you have done well. I suspect the problem could be with " SSL Client Certificate ". Check weather the SSL Client Certificate is Valid version.
Best practice.
   Alway when we are communicating with HTTP outbound. It is better to have a STANDALONE ftp location for both SENDER and RECEIVE xml DATA transfter files.
         I hope I answered your question. It was nice answering your question. Feel free to reach SDN if you have any questions.
Regards

Cisco ISE configs for switch

I suppose Cisco ISE sends a URL redirect to the switch and the switch presents it to the client in case of guest Access getting a URL redirect with User Acceptance Page (Wired Guests and not wireless).
My question here is, Do we need to configure http and https server on the switches (both supplicant and authenticator)?
I am sure it will need but just wanted a confirmation..
I have checked the configuration for supplicant and Authenticator switches for ISE and it has no where mentioned that part of the config.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html (a problem of URL redirection and possible cause is mentioned) ------- makes me sure that the config is needed.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_010000.html
(config of supplicant and authenticator switch)---- nowhere mentioned of the http/https config for both switches.

Yes, its needed. The http/s server within the swtich is used to grab the http user traffic and redirect the traffic to the CWA portal, or a device registration portal, or even to the Mobile Device Management (MDM) onboarding portal. .
ip http server
ip http secure-server
The info below I grabbed from Cisco ISE for BYOD and secure unified access book.
"Many organization want to ensure that this redirection process using the switch's internal HTTP server is decoupled from the management of the switch itself, in order to limit the chances of an end user interacting with the management intervace and control plane of a switch. this may be accomplished by running the following two commands from global configuration mode:
ip http active-session-modules none
ip http secure-active-session-modules none"

ACS administration page https fail to connect

Hello
Please help me to access to the admin page of CISCO ACS 4.1 Software !!
First i was able to connect with http and https, the certification (for https) was ' auto-assigning certification' but after a modification by error of the local administrator , they change auto-assigning to CA externe. After that, a message appear ' certification expire error -8101'
I try to create a new certification in The CA and install it to ACS server; don't work
The Great problem is i can't access the ACS web page to change the configuration.
(telnet or SSH don't work)
Tell me please if they is some modification i can do solve this issue !
Thanks

You might need to re-image it.
The other option is,
Per bug CSCsm85466 Enhancement request for ACS to remove the Https configuration, Cisco provided a script to remove https from the configuration for ACS windows.
If yours is ACS for windows, you can use that script to remove it.
If you have ACS appliance, you can do a
1. backup
2. restore it on ACS for windows,
3. use the script to remove https config
4. backup it and then restore it on ACS appliance.
Please open a TAC case to get help on this.

Why can't I view a secure web site (basic https) on my iPhone?

I was wondering why my iPhone is unable to connect (at all) to https://c1.cmpro.net? When I attempt to go to this address (this is a server at work I'd like to be able to use via my iPhone), I get the following message: "Safari can't open the page because it could not establish a secure connection to the server."
I'm fairly certain that the https config on this server hasn't been set to cause it to exclude iPhones, or that it is in fact doing anything out-of-the-ordinary so far as https configurations are concerned for a web site.
Any ideas, feedback would be greatly appreciated. I'd love to be able to connect to this site via my iPhone.
Thanks.

I think I might have just answered my own question. When accessing the site in question via Safari on my iMac just now, I was warned that the security certificate could not be verified, and asked if I wanted to continue. I'm presuming the same thing is happening on the iPhone, only I'm not getting chance to say that I'd like to continue. Instead, it just stops and basically says, "I can't verify the security of this site, therefore I can't connect to it securely."
I'll look into the certificate issue for that server and see what can be done to get it resolved.
I wish that the iPhone had a way to register "trusted sites" in order to circumvent this type of things (I happen to know I can trust this particular site.) It would also be very helpful to be able to install PKI certificates for sites that require those. Oh well, maybe in a future version of the iPhone Mac OS ...
Thanks for your answers.

Can URL redirects be configured with XE and what is the HTTP Server

I would like to be able to URL redirects. I'm running XE with Application Express 2.1.0.00.39.
I want to be able to have a URL like www.schoolwebsite.com and when the user hits it - have it redirect to the Apex page for the application. I was thinking that I needed to use a redirect in the HTTP config file, and that XE used Oracle_HTTP and I could configure in that manner.
But, I can't find an Apache directory.
1. What HTTP server is used with XE and Application Express 2.1.0.00.39?
2. Can I configure for this type of redirect?
3. Do I need to install an HTTP server to accomplish this?
Thanks,
Stephen

Hi Steven,
search for "proxy" in this forum.
It explains how to configure a plain Apache http server as a proxy to XE. Then you can use the default mechanisms to rewrite an url.
Here is an example (save the file as XE.conf and store it in the Apache conf directory (file httpd.conf is there).
The following instructions are valid for Apache2.
# Activate the following modules in httpd.conf:
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule headers_module modules/mod_headers.so
# include the XE configuration (this file XE.conf) in httpd.conf:
#include "conf/XE.conf"
# XE listener is buggy, thus downgrade to http 1.0
SetEnv force-proxy-request-1.0 1
RewriteEngine On
RewriteLog "D:\Programme\Apache Group\Apache2\logs\rewrite.log"
RewriteLogLevel 0
## Rewrite requests /apex, /i, /public, /sys to locally installed XE
RewriteCond %{REQUEST_URI} /(([^/]+)(/.*)*)$
RewriteCond %2 =apex [OR]
RewriteCond %2 =i [OR]
RewriteCond %2 =public [OR]
RewriteCond %2 =sys
RewriteRule ^/(.*) http://%{SERVER_NAME}:8080/%1 [P]
## Rewrite main page
RewriteEngine On
RewriteRule ^/$       http://%{SERVER_NAME}/apex/f?p=107:1 [R]
RewriteRule ^/index.html$       http://%{SERVER_NAME}/apex/f?p=107:1 [R]
## Rewrite /app1
RewriteRule ^/app1$      http://%{SERVER_NAME}/apex/f?p=107:1:0 [R=303]Regards,
~Dietmar.
Edited by: Dietmar Aust on Oct 14, 2008 1:16 AM

How do I completely enable a new custom asset in Correspondence Management?

Hello!
I'm trying to add a new custom asset to the Correspondence Management Solution Accelerator, and have it behave like all other assets in the system (ie searchable, updateable etc). I'm almost there, but there's obviously something I'm missing, and I was hoping someone here might have done this before, or have a link to some documentation regarding the matter that I may have missed. The asset I'm trying finish creating is for a LiveCycle user in a specific domain. This is what I've done so far...
I've created the asset definition MyUser.fml and placed it in the FSIApp\Portal\webapp\WEB-INF\assetDefinitions folder. I've then registered this fml file in the spring-config.xml file in both the 'lc.cm.assetDefinitionsDeployer' and 'lc.cm.assetTypeRegistryBootstrapper' beans. In the 'lc.cm.assetTypeRegistryBootstrapper' bean, I set the key to 'MyUser', and the value to the class path of my Java class that represents this asset.
On the Java side I've created the MyUser.java class, as well as MyUserService.java and MyUserServiceImpl.java to allow the searching, updating etc of the MyUser assets.
After running the Bootstrap process, I can log into the Manage Templates application, select Data Dictionaries from the 'View' dropdown, and view/edit the MyUser data dictionary properties with no problems. So I'm happy that the asset has successfully been registered with the application.
Where I'm stuck is choosing the MyUser asset from the drop down, and searching the system for assets of that type. I can choose the MyUser asset type from the 'view' drop down, but the search result returns an empty array.
From digging into the existing Manage Templates code, I've created the following classes:
public interface IMyUserService extends IEventDispatcher - containing the following function definitions:
          function getMyUser(id:String):IAsyncToken;
          function getAllMyUsers(param1:Query=null):IAsyncToken;
public class MyUserSeviceProvider extends ServiceProvider - containing a getter/setter for MyUserServiceDelegate
public class MyUserServiceDelegate extends ServiceDelegate implements IMyUserService - containing the functions defined in IMyUserService, as well as creating the RemoteObject to perform the actions.
The MyUserServiceDelegate constructor is:
     public function MyUserServiceDelegate ()
            super();
            _service = new RemoteObject("myapplication.services.myUserService");
            _service.showBusyCursor = true;
This is the code for the function in getAllMyUsers in MyUserServiceDelegate:
     public function getAllMyUsers(param1:Query = null):IAsyncToken
            var operationToken:AsyncToken = this._service.getAllMyUsers(param1);
            var token:IccToken = new IccToken(this.className + ".getAllMyUsers");
            operationToken.addResponder(getDefaultResponder(token));
            return token;
I've also made changes to the following config files to register the RemoteObject destination specified in the MyUserServiceDelegate constructor:
spring-http-config.xml:
     <bean name="/service/UserService" class="org.springframework.remoting.httpinvoker.HttpInvokerServiceExporter">
        <property name="service" ref="myapplication.services.myUserService" />
        <property name="serviceInterface" value="com.mydomain.lc.services.MyUserService" />
    </bean>
remoting-config.xml:
     <destination id="myapplication.services.myUserService"/>
flexmessagebroker-servlet.xml
     <flex:remoting-destination ref="myapplication.services.myUserService" />
Above my Java class definition of MyUserServiceImpl.java I have the following line:
@Service("myapplication.services.myUserService")
So......
My problem is that when I choose the MyUser asset from the drop down, no search results are returned (an empty array is returned). I have logging code in the getAllMyUsers function in the MyUserServiceDelegateclass.as, as well as logging in the MyUserServiceImpl.java class (not shown in the above code snippets) and neither of them fire when selecting the MyUser asset from the drop down. So neither of the classes are being called on the search. If I force a search via the following line:
MyUserSeviceProvider.getMyUserService().getAllMyUsers();
the logging in both the Flex and Java classes works (and the java class returns the results as expected). So I'm happy that these functions, as well as the linking between the Flex and the Java side is working correctly.
The step that I can't seem to work out is having the selection of the asset in the drop down call the desired function automagically. I've been digging into the SearchManager, the ServiceLocator and heaps of other classes, but I'm falling deeper and deeper into the rabbit hole...
Can anyone shed some light on what they think might be needed to make the final link here? I've been digging and digging into the code for days now and my brain hurts!!
Any advice appreciated!!
Thanks,
Kristian

Hi Saket,
By 'not really complete' I'm assuming (hoping) that some work has been done on this already. Our project requires the use of custom assets, so it's very important that we get this functionality running as soon as possible.
Any help, unsupported or otherwise, would be great. Feel free to email me any details if you'd prefer not to post anything public on the boards.
Cheers,
Kristian

I am trying to create a RSS feed from scratch

Okay so I want to create a RSS feed with these two links:
http://www.networkcomputing.com/rss.php
and
http://www.voip-news.com/rss/vnar.xml
I have checked out different widgets and what not but I want to create this from scratch.
I started this xml file:
<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0">
<channel>
<title>Network Computing</title>
<link>http://www.networkcomputing.com/all.xml</link>
<description>Top stories and blogs</description>
<lastBuildDate>Wed, 14 Jul 2010 10:19:00 GMT</lastBuildDate>
<language>en-us</language>
<item>
<title>Catbird, Hytrust Offer Integrated Virtualization Compliance Reporting
</title>
<link>http://www.networkcomputing.com/virtualization/catbird-hytrust-offer-integrated- virtualization-compliance-reporting.php</link>
<guid>http://www.networkcomputing.com/virtualization/catbird-hytrust-offer-integrated- virtualization-compliance-reporting.php</guid>
<pubDate>Wed, 14 Jul 2010 10:19:00 GMT</pubDate>
<description>Virtualization security companies Hytrust and Catbird will offer integrated compliance reporting that encompasses the hypervisor-host and network environment down through the virtual machine level. Catbird vSecurity, delivered either as a hosted service or virtual appliance, ensures correct hypervisor configuration and deploys network access control (NAC) against unauthorized access and protection against attack via IDS/IPS. Its VMShield component protects client VMs, tracks them as they move and enforces policy.</description>
</item>
</channel>
</rss>
So I created a button on my home page, and it is linked to this XML file. Everything works great except it only shows the item that I coded in...I want it to show ALL items.
Can I do this without having to input each item individually?
Is this how I should do it anyways with a button linking to this xml file?
I really want to have like 3-5 of the posts to auto update on my home page but I dont know how to embed the RSS into my HTML home page file.
Also, the way I have it coded, will it automatically update the new posts?
or do I have to wait for the new post and input the item into the xml file?
I am very new to the RSS feed so please help.
Thanks,
cp

Here is my HTML code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>

</style>
<script type="text/javascript">

</script>
<link href="styles.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMasterDetail.css" rel="stylesheet" type="text/css">
<style type="text/css">
body {
    background-color: #3B5998;
.style2 {
    font-size: 14px
.style6 {
    font-family: Arial, Helvetica, sans-serif;
    font-size: 11px;
    color: #97B1F4;
.style7 {color: #FFFFFF}
.style8 {
    color: #97B1F4;
    font-weight: bold;
    font-size: 12px;
    font-family: Helvetica;
    margin-left: 35px;
.style9 {color: #97B1F4}
.style10 {
    color: #97B1F4;
    font-size: 12px;
    font-family: Helvetica;
    font-weight: bold;
.style11 {
    color: #97B1F4;
    font-size: 12px;
    font-family: Helvetica;
</style>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<script src="http://config.spry-it.com/js?f=1.7/data/1.7/jsondataset/nestedjsondataset"></script>
<script src="SpryAssets/SpryDataYQLDataSet.js"></script>
<script>
var dsItem = new Spry.Data.YQLDataSet(
    'select * from xml where url="http://www.networkcomputing.com/all.xml"',
    false,
        format:"xml",
        preparseFunc: function( strxml ){
            var xml = Spry.Utils.stringToXMLDoc( strxml ), ds = Spry.Data.XMLDataSet.getRecordSetFromXMLDoc( xml, "rss/channel/item" );
            return ds.data;
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
</script>
</head>
<body>
<div id="container">
<div id="banner"></div>
<div id="navigation">
<div id="navbar">
<ul class="style2">
    <li><a href="index.html">Home</a></li>
    <li><a href="solutions.html">Solutions</a></li>
    <li><a href="services.html">Services</a></li>
    <li><a href="support.html">Support</a></li>
    <li><a href="about.html">About</a></li>
    <li><a href="contact.html">Contact</a></li>
</ul>
</div>
</div>
<div id="navigation2">
<img src="images/navigation_2.jpg" />
</div>
<div id="content">
<div id="right_content">
<div id="video">
<embed src="network.mp4" width="320" height="162" autostart="true" style="background-color: Black; " type="video/quicktime" autoplay="true" loop="true" controller="true" pluginspage="http://www.apple.com/quicktime/download/"></embed>
</div>
<div id="title_bar">
    <p class="style8"><a target="_blank" href="http://www.networkcomputing.com/all.xml">RSS Network Computing</a></p>
    </div>
<div id="PageWrap">
<div class="MasterDetail">
<p class="style10">Select a Channel:</p>
    <div spry:region="dsItem" id="MasterContainer" class="MasterContainer">
      <div spry:repeat="dsItem" spry:test="{ds_RowID}<4" spry:choose="choose">
        <div class="MasterColumn" spry:when="{ds_RowID} == {ds_CurrentRowID}" spry:select="MasterColumnSelected" spry:selectgroup="master" spry:selected="MasterColumnSelected" spry:hover="MasterColumnHover" spry:setrow="dsItem">{title}</div>
        <div class="MasterColumn" spry:default="default" spry:select="MasterColumnSelected" spry:selectgroup="master" spry:hover="MasterColumnHover" spry:setrow="dsItem">{title}</div>
      </div>
    </div>
    <br/>
    <div spry:detailregion="dsItem" class="DetailContainer">
      <div class="DetailColumn"><span class="style9">Category:</span>  <span>{category}</span></div>
      <div class="DetailColumn"><span class="style9">Published:</span>  <span>{pubDate}</span></div>
      <div class="DetailColumn"><span class="style9">Author:</span>  <span>{author}</span></div>
      <br/>
      <div class="DetailColumn"><span class="style9">Description:</span><br><span>{description}</span>  <button onClick="MM_openBrWindow('{link}','','')">More...</button></div>
    </div>
    <br style="clear:both" />
</div>
</div>
<div id="title_bar">
    <p class="style8"><a target="_blank" href="http://www.voip-news.com/rss/vnar.xml">RSS VoIP News</a></p>
    </div>
    <p class="style11"><a href="voip_rss.html">View Now (Click Here)</a></p>
</div>
<div id="left_content">
</div>
<div id="logos">
</div>
</div>
<div id="footer">
<div id="footerbox">
<p class="style6"><span class="style7">Stanford Technologies</span> © Copyright, 2010. All Rights Reserved. Powered by <span class="style7">Chris Proett</span></p>
</div>
</div>
</div>
</body>
</html>
I just want to take away the scroll bar in FF.

HTTPS Config in XI

Similar Messages

Maybe you are looking for