Huawei E1762 USB Broadband connectivity issue in macbook pro 13" 2011:

The Dongle is giving issues with Mac book Pro 13" Feb 2011. This is my first Mac and so i dont have idea if the same problem existed for other macbook pros. The speed drops to zero and sometimes it gets disconnected automatically. I also tried using the Mobile partner dashboard for the huawei E 1762 but it doesnt help.
Is anyone facing the same problem? Please help as i have to travel a lot and using USB broadband is the only option.

I have read some of the dongle firmware need to be upgrade, check with your ISP.
Im using a E1550 3g dongle which after I have updated my MBP to 10.6.7, it didnt work at all. Called my ISP, use Vodafone program instead of Mobile partner, and it works great now.
Hope this is helpful.

Similar Messages

I have my new HD in a USB enclosure connected to my MacBook Pro and I want to put a fresh copy of Mountain Lion on it. But I do not have an install DVD as I got ML as a download from the App Store. What do I do?

I have my new HD in a USB enclosure connected to my MacBook Pro and I want to put a fresh copy of Mountain Lion on it. I'm told that I need to boot from the Installation Disk to start. But I do not have an install DVD as I got ML as a download from the App Store. Can I download ML from the App Store again, but this time directly to my new HD?

Create a data recovery/undelete external boot drive
You can also use Carbon Copy Cloner to clone your present setup to it and boot from it.
Most commonly used backup methods
However, SOME external enclosures are not bootable, you will soon find out.

How do I share a 3G USB modem connected to my Macbook Pro with my Airport Express?

Hi. I have a 3g USB modem connected to my macbook pro, and I want to try share the signal with my Airport Express (latest model).
Now before everybody screams that it can't be done, I was searching the forums and found a discussion in which someone describes how to do it from 2008, unfortunately it is archived and I couldn't ask the author directly, and the description doesn't go into much detail.
In the thread, the author describes turning internet sharing on to share the USB modem, creating a network on the macbook, then renaming the Airport Express network name the same as the macbook, and setting the AX to Join a Network.
Problem being there is no description of whether the macbook connected to the AX via ethernet or wifi, what settings were changed on the AX eg bridge mode.
Is this possible in theory, and has anybody had any success sharing a 3g USB modem via a macbook pro to an AX? I know there are other options like getting 3g ethernet modems, unfortunately not an option in this case - new house, waiting for DSL to be installed, 2-3 month wait.
Thanks

Well, you cannot use the 3G USB modem plugged directly into the Express. However, you can configure your MacBook Pro to do 'Internet sharing' (SysPrefs>Sharing) over the Ethernet port, and then connect your Express into the Ethernet port. Alternatively, you could always get your MacBook to 'create a wireless network'.
new house, waiting for DSL to be installed, 2-3 month wait.
You could always look for open WiFi networks to *cough*borrow*cough* .

Has anyone used a 1.44 usb floppy drive with a MacBook Pro late 2011 model ? I have photos of my children i would like to recover.

I have photos on 1.44 floppy disk and would like to copy them to DVD, has anyone used a 1.44 usb external drive with a MacBook Pro (late 2011)? The disk where made on a PC from 1990 -94 the images are in .img and .jpg.

Hello riflemanpro,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Have a nice day,
Mario

Connection issues with MacBook Pro and DVI to component video

How do I connect a 2007 macbook pro to a regular tv (non-hd) via the DVI port with component cables? The image is always scrambled. The connections are fine, what do I need to do?

Concerning this comment:
I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

Fix for wireless connection issues on MacBook Pro - reinstall OS!

I hope this helps some of you out there.
I was having all the usual problems with connectivity with the MacBook Pro I bought in January 09. It dropped the signal constantly and if I closed the top, it would make me search for my network again then it would give me the "connection timeout message" over and over again. I couldn't get anything done either at home or anywhere else. I finally took it in to the genius bar but they couldn't replicate the problem so I was sent home. The guy did, however, suggest reinstalling the OS (which I thought was a dumb idea since it had to be the airport card right?). Since it was a week away from the release of Snow Leopard I waited.
Once I installed Snow Leopard all was fixed. It has now been almost 2 weeks and I haven't lost a signal once - the difference is amazing. I feel liberated!!
Try a reinstall or upgrade to 10.6. and good luck. Post here to let us know if it works for you. Don't forget to backup your date first!

Nope I'm not trying to tether. I would like to be able to use a wifi connection on my mac and other devices. I've gotten by so far just hooking up my mac to the ethernet port, but that requires me to be in my room. I know its possible since there a bunch of networks nearby (locked of course), but I just can't figure out how to get mine working.
I'm living in an apartment across the street from campus that is sort of school-owned...well its private but the internet service is provided by the campus since only students live here. So we have to register anything that we want to use on the school's network. On campus I can use wifi on my mac or iphone. Its troubling how I can use the ethernet cable just fine, but when I connect it to my router (which I registered through the school as well)...nothing. Technically this should be working easily - but maybe you're right on the network security accessability...or maybe my router is old...or my mac doesn't like my router? I've had this problem before during my undergrad years except I was dealing with a cable provider and not the school.
Maybe I should just make friends with my neighbors and find out how they set up theirs haha.

Hard Drive Connection Issue on MacBook Pro

Hi,
A couple weeks ago my MacBook Pro was running and suddenly went into a non-stop pinwheel freeze. After waiting a few minutes I decided to do a manual shut down and when I attempted to reboot it, I just got a blank white screen that wouldn't go away and then a blinking question mark folder when I tried it again. Luckily I already had an external HardDrive Dock so I removed my Hard Drive, used the system startup Disc that came with the computer to redirect the start up disc, and I've been able to boot my MacBook from the Dock since then through a USB cable. So I have a temporary fix, but of course it requires a lot of set up, it's a slower connection, and is less convenient when I take my laptop from place to place.
What I want to do is replace the connection between the Hard Drive and I my MacBook but I want to make sure that I purchase the right part. My MacBook is two or three years old now but it runs fine (besides these issues) and is fast enough for all of my needs. My Macbook is a MacBookPro5,5 with an Intel Core 2. I believe it is a 15 inch model. I'd like to avoid taking this to the Apple Store if possible because I have a limited budget and this should be a pretty simple repair as long as I'm replacing the right part. Can anyone tell me what the probable part is that I need to replace?
Thanks,
Todd

SuperDuper is not compatible with Leopard, but CCC 3.0.x is.
Put the new drive in an enclosure and connect it to the computer. Prep the drive by partitioning and formatting with Disk Utility. Clone your existing system using either the Restore option of Disk Utility or CCC (CCC is a bit faster.) Test the clone to be sure it boots the computer. If all is well then replace the old drive with the new one and put the old drive in the enclosure.
Bear in mind that doing this yourself is not approved by Apple.

MX870 connection issues with MacBook Pro

Hi
I have a MacBook Pro on 10.8.5 and I cannot find or connect the MX870 printer wirelessly. It used to connect perfectly and now doesn't at all.
I have an iMac on 10.9.3 that runs the MX870 without issue.
Not sure how to resolve?
Thanks

Hello mthomson,
Thank you for contacting Apple Support Communities.
You can use the following article to troubleshoot the printing issues on your MacBook Pro:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Regards,
Jeff D.

Wireless USB Modem connection problem on MacBook Pro

I am running os x 10.8.2 on my macbook pro and am trying to connect to the internet using an alltel Wireless USB Modem (manual found here: http://pcdphones-client.s3.amazonaws.com/files/709/Alltel_English_Manual.pdf) through verizon. The USB modem works on all my PC's at home and I recently switched to a mac.
I got the software installed when I plugged the USB modem in, but i cannot get it to connect to the internet. When I open the alltel program, I cannot click the connect button and it says "no wireless WWAN device connected" and "no wireless networks defined. To define a network, click on Networks in the Preferences". I've been in the networks tab, but don't really understand how to get it to connect.

When you contacted aaltel what did they have to say?

3GS and Bluetooth pairing/connecting issues with Macbook Pro

I've got a Macbook Pro 15"... Just got my 3GS today... But for the life of me cannot seem to get the 3GS connected to my MBP over Bluetooth... Both the MBP and the 3GS have BT turned on, and both "discoverable"... Done the pairing with the code provided by the MBP, and entered into the 3GS... But that's it... the iPhone shows up in the devices under Bluetooth Preferences, but just can't "connect"... There's a spinning icon on the 3GS in the BT panel... with my MBP showing up, but just sits there, spinning...
What am I doing wrong??

im assuming your on at&t
--if you are trying to use the iphone as a modem for your macbookpro:
currently at&t doesnt support using he iphone for tethering... they say they will later ... no real details about limits and prices but you can bet they will be low and high respectively.
--if you are trying to sync the iphone with itunes over bluetooth:
that profile doesnt exist yet and or itunes doesnt support it yet from what i can find... gonna have to stick with the usb cable... which is faster than bluetooth anyway

Wireless connectivity issues with Macbook Pro and At&t service HELP!!!!!

I have three Computers two PC's and one Macbook Pro( the latest model).My desktop PC is used by ethernet, my girls laptop is used wirelessly and finally my MBP was being used wirelessly.
I started off with only the two PCs and my internet connection never had a problem and I was doing everything from: on the internet to downloading.
Before I bought my MBP I had also switched from internet and phone bundle to just internet from At&t service. So when I got my first MBP I notice that I was loosing wireless connection with both my girls pc laptop and my MBP so i thought it was because I had just switched service, though they send out a service technician and we came to a conclusion that it was the MBP. (I was loosing signal via wireless and ethernet). So we tried to see if both my girls laptop(wireless) and my PC desktop (ethernet) would run into the same issue which it did not.(MBP was turned off)
So I decided to go my nearest Apple store and let them know what was going on. So I told them what was going on and they said It must be the airport card, and they ended up changing it. When I get home I discover that not only I am having the same issue but other issues too. I went back they ran some diagnostic and they said it was defective and they gave me a new one few days later.
So in the mean time that I waited for my new one to arrive I used my PC desktop and my girl kept using her laptop and guess what no issue what so ever for one whole week. Now I receive my new MBP(they bumped the specs a little), went home set it up and still the same issue though I dont have the issue when Im using via ethernet. Just a view minutes ago I tried removing the ethernet and using the airport/wireless and within a few minutes I lost the signal.
I have the gateway 2WIRE model(2701HG-B) modem/router.
Is there something wrong? what do I have to do to make this work?

Hi Guys, I bough my Mac almost two years ago. All this time I have experienced the same issue. There are tons of discussions re this issue in the internet. Unfortunately, Apple has done nothing to fix it. I have tried a lot of different options, but they work no longer then 1-2 days. The official fix - does not exist so far. It is quit strange, isn't? I can share my experience: if you go to AirPort Utility - Manual Setup - Wireless and then change Channel, it could help you till the moment you restart your computer; next time you need to repeat it again. It takes 2 minutes. Not sure that it would work for you but you could give it a try. Well, not the best option. Anyway Apple must fix it asap! Hello Apple, do you hear us? Good luck.

Isolated wifi connectivity issues for MacBook Pro

When I connect my MacBook Pro to the wifi at my university only google.com and apple.com load. No other websites will load (including gmail.com). It is an isolated issue to my machine with this one particular network, as my iPhone connect to the same network with no difficulties as do other MacBook Pros and PCs around me. My MacBook Pro shows excellent signal strength when connected to that network.
When I am using my home wifi or wifi and work, I have absolutely no issues with connectivity or loading any pages.
Can give me an idea as to what might be going wrong?

There's a reason why the Finder in the dock is doing this. Click on the icon and tell us what the prompt says.

Wireless connectivity issue between MacBook Pro/ iTouch and Airport Express

I'm creating a wireless network at home using my airport express and depending on the configuration settings I set in the airport utility, I will face the following issues:
1- To connect my MacBook Pro to the wireless network created, I have to set the radio mode to 802.11n only (5 GHz). Any other radio mode (a/b/g compatible or n only (2.4 GHz)) will not work ("Couldn't find the network")
2- Conversely, the use of the radio mode 802.11n only (5 GHz) with my iTouch doesn't work ("Couldn't find the network"). To connect my iTouch to the wireless network created, I have to set the radio mode to 802.11a/b/g compatible or to n only (2.4 GHz)
As a result, I manage to 1) either connect to a wireless network created with my airport express with my MacBook Pro only 2) or with my iTouch only, depending on the configuration setup.
I'm using the latest updates for the airport utility (7.4.2), iTouch (3.1.3) and Mac OSX (10.6.4).
Any help on this?

if you set it to the most compatible with the least common denominator you should be able to connect with both. (If that's what I understand you are trying to achieve).

Connectivity Issue Between MacBook Pro and Mac Mini

I have a MacBook Pro and a Mac Mini both with Yosemite 10.10.2, I've never had any issues with them sharing a connection when I was home, (I've never been able to connect outside of my home network) but I use the Mini to backup my MacBook Pro, but has of February 11th my MacBook Pro doesn't see my Mac Mini no matter what I do. I can share the screen from the Mini to the Book Pro but I can't remotely access the Mini from the MacBook Pro. I've turned off Back to My Mac on both Macs and removed it from my Airport Extreme and re-entered all of the information. I signed out of iCloud on both Macs and signed back in. I haven't changed any settings at all before I lost the connection, I am not sure how to resolve this issue.

Hey there GRivera210,
It sounds like you are having issues with using Back to my Mac. I would recommend using the troubleshooting outlined in the following article to help resolve the issue. It also has a contact for the iCloud support team if it doesnt resolve it:
If you have issues using Back to My Mac
Thank you for using Apple Support Communities.
Take care,
Sterling

My HP ENVY 100 D410a is connection issues between MacBook Pro OSX 10.6

Both my Macbook Pro OSX 10.6 and my HP Envy 100 D410a is connected to my wireless nextwork. Everything was working fine until recently, my macbook does not connect, - keeps saying the printer is offline when it clearly is on and connected. I have tried to reinstall all printer software and drivers from CD and the HP site, it fails when the laptop tries to connect to the printer.
Any advice / help would be appreciated.
Thanks.

Macuserlovenit wrote:
Can I delete a network I created and now want gone outta the router(airport extreme)?
Sure.. a reset will surely do it.. a removal of the offending name will also do it.
Can I delete all networks by resetting the router back to factory settings?
Sure can.
I also have this UPDATE "A newer version 5.6.1 of airport utility is available" it KEEPS opening when I open my Airport Utility APP, but when I click on it to UPDATE nothing happens, ever. Im already running 7.6.3
Bit of confusion here.
Latest version of the airport utility for snow leopard is indeed 5.6.1
Open the airport utility, about .. and check what version you are running.
The very latest airport utility is 6.3 and only can be installed on Lion or Mountain Lion computers.
The firmware latest version is 7.6.3
which makes it all a bit confusing.

Huawei E1762 USB Broadband connectivity issue in macbook pro 13" 2011:

Similar Messages

Maybe you are looking for