HUMO-A reason has to be entered for movement type 344

Hi All,
We currently have the system configured to enter a 'reason for movement' for movement type 344 and this field is marked as required in the movement type configuration. We have configures the transactions allowed for the movement type and HUMO is one of them.
When I try to post the same HU using the path 'Edit-> Change HU Posting-> Other Postings->Process-> Transfer posting unrestriced to blocked', it prompts me for a 'Reason for Movt' and allows me to post it to a blocked stock.
However, when we try to post an HU to blocked to stock using the path in HU monitor 'Edit-> Change HU Posting->In Blocked Stock', the system gives an error 'A reason has to be entered for movement type 344'. Please note, it does not even prompt me to enter a reason for the movement.
Is there a configuration node to have the above error corrected? Or is there any SAP note which could help us solve the problem? We are aware of the SAP note 1679167 for transaction VLMOVE but not sure the same would actually correct the issue for HUMO. Any help in this regard is appreciated.

Hello Biswajit,
unfortunately, as far as I can see in source
SAPLHUMO                 
/ LHUMOF04
FORM                     
/ TRANSFER_POSTING_HU
during debugging, there is no GUI code to ask user for a reason. So it's a lack of functionality.
I think you can add this by an implicit enhancement around FORM transfer_posting_hu asking user e.g. with function module call POPUP_GET_VALUES_DB_CHECKED.
But transfering the entered reason down to the MM posting seems also not so easy because reason field "GRUND" may not visible in that callstack level.
Hope that helps you along
Best regards,
Matthias

Similar Messages

  • Error while deleting the confirmation- Reason has to be entered for 102

    Hi,
    When i try to delete the confirmation for Goods, an error -"A reason has to be entered for movement type 102" is occuring. I have maintained the reason for rejection in the document tab at the line item level while deleting the confirmation.The reason for movement field is mandatory in R/3 system for movement type 102. I have maintained this reason for rejection that has maintained in the R/3 system in the SRM config and able to select that during deletion of confirmation, but still i am getting this error. Please suggest.
    Regards
    GGL

    sorry for the very late reply..
    Note 1345896 - Error due to reason for movement when deleting the GR in EBP
    When we try to delete a goods confirmation with the Reason for Rejection text in SRM, we get the error "A reason has to be entered for movement type 102" (M7 325) thrown from the backend R/3 system.
    Other terms
    M7 325, RREJ, Reason for Rejection, MOVE_REAS, c_subtype_ca, LBBP_CFF60, FORM mapping_gr_for_backend.
    Reason and Prerequisites
    This is caused by a program error
    it helps aothers too

  • Create Immediate TO for movement type 344

    Hi Gurus ,
    I wanna create immediate TO for movement type 344, so i did the following configs:
    1:Go to OMLR, set field "Immed.TO " as "A" for my warehouse and movement type 344.
    Then , i called up MB1B 344, but no TO was created immediatelly.
    i checked the additional data in LU03, the movement type is 344, and immed.TO is ticked.  it seems all setting is ok, why the TO can't be created immediatelly?
    thank you in advance.
    BR,
    Dragsky

    First check which ref. movement type assigned to 344 movement type in W/H under below path
    SPRO> LE>WM>Interfaces>IM>Define movement types
    In this go to first option and check the last movement type assigned to mvt type 344 i.e. "Reference movement type for posting change in whse mgmt" (in combination with other indicator like stock category, special stock indicator etc....)
    Then got to OMLR and check whether this ref. movement type defined for your W/H,
    if yes, maintain setting for auto TO  in that specific entry (in combination with other indicator like stock category, special stock indicator etc....)
    If no, then check movement type for *** W/H and maintain specific entry (in combination with other indicator like stock category, special stock indicator etc....)
    Hope it helps.
    Regards
    Anand Misra

  • Reason code required for movement type 122

    I am getting the above error and looked up a thread on the forum which applies to my scenario. However there was a mention of defining a text schema and assigning it to the movemnt type. Can someone help me how to do that?
    Jai
    The thread is as follows:
    We are running SRM 550 with Extended Classic scenario. When I attempt to create a return delivery, I get an error message saying: A reason has to be entered for movement type 122. But there is no way to enter the reason, i.e no fields or indicators.
    <b>The text schema for return delivery is maintained and assigned to the document type for confirmations -</b> as far as I am aware this is all the config which is necessary to activate the reason for return delivery function. Am I missing something??

    Hi Jai
    Text Types Menu Path : SPRO -> SAP Implementation Guide &#8594; Supplier Relationship Management  &#8594; SRM Server &#8594; Cross- Application Basic Settings -> Text Schema -> Define Text Types
    Text Schema: Menu Path : SPRO -> SAP Implementation Guide &#8594; Supplier Relationship Management  &#8594; SRM Server &#8594; Cross- Application Basic Settings -> Text Schema -> Define Text Schema
    Fixed Values: Menu Path : SPRO ->SAP Implementation Guide &#8594; Supplier Relationship Management  &#8594; SRM Server &#8594; Cross- Application Basic Settings -> Text Schema -> Define Fixed Values for Texts
    Best regards
    Ramki

  • Value to be entered for Version type while populating metadata into Plannin

    Hi
    I have extracted the version dimension from my outline.
    Now i need to push it into Planning 11. I have reversed the planning dimension 7 using the version dimension to push value.
    After extract, the version type comes under UDA as "Standard bottom up, Public". I split the string into 2 columns as version type & other as UDA.
    I mapped the version type column at source to version type (in planning) at target.
    On executing the interface, it generated the following error log:
    Final Version,Version,,Never Share,,,,Public,Standard Bottom Up,~,Cannot load dimension member, error message is: java.lang.IllegalArgumentException: Invalid value for field Version Type: Standard Bottom Up.
    REV 1,Version,,Never Share,,Release 1,,Public,Standard Bottom Up,~,Cannot load dimension member, error message is: java.lang.IllegalArgumentException: Invalid value for field Version Type: Standard Bottom Up
    What value should be entered for version type??
    Moreover if there is any doc/pdf which provide details about the different values that can go into Planning dimensions, please share.
    Thanks in advance
    Edited by: user8628169 on Jan 18, 2010 4:40 PM

    Hi,
    The value should be "Bottom Up" or "Target", have a read here for the properties
    Ok?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • GOODSMVT_CREATE for movement type 161, Error mg " Enter Purchase group "

    Hi Experts,
    While creating PO for movement type 161 , it doesnu2019t insert the good receipt in SAP . I am getting the error message " Enter the Purchase group" after coming out from the BAPI_GOODSMVT_CREATE.
    i tried with movement 101 and it create correctly the GR in SAP . Problem oly with movement type 161.
    Anything i have to do changes in code or its functional side (they have to maintain.).
    Please help me.
    Thanks a lot in Advance.
    Regards,
    Priya.

    Hi Priya,
    {CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
        EXPORTING
          goodsmvt_header  = p_lt_goodsmvt_header  "  here in this header struc pass movement type
          goodsmvt_code    = ' '   " pass this value correctly
          testrun          = ' '
        IMPORTING
          goodsmvt_headret = p_e_goodsmvt_headret
        TABLES
          goodsmvt_item    = p_lt_goodsmvt_item
          return           = lt_return.}
    Thx,
    Vishnu .

  • Issue with Return Delivery for movement type 262

    Hi,
    I have got a strange issue, the user is trying to do a MIGO Return Delivery for a material document using movement type 262, this he claims has been doing it for many materials. However when i go to the MKPF table i see the transaction Code field to be MIGO_GI for all the material documents for which he claims to have done return delivery. But under this transaction code we have only 4 options - Display, Issue, Cancel and Remove from storage.
    Now when he tries to do the return delivery for movement type 262 he get an error message "Check table T156N: entry RL 262  does not exist" , but this has been very well maintained in the table.
    Can you please let me know -
    If it is possible to do a return delivery for a movement type 262?
    If yes how to address the above error encountered.
    Thanks in advance
    Sachin

    Hi Sachin,
    If you think of return delivery to vendor with or w/o PO reference you can use movement types 161, 122, 124 as default settings.
    Movement type 261 means withdrawal against production order and its reverse is MVT 262. The latter can be used e.g. via MB1A (or you can make storno of a confirmation by 261).
    Are you sure your user is using the correct terminology ('return delivery')? Please check the material documents he/she claims to have booked as return delivery. (in MB51 you can get a list of all material movements of MVT 261 that belong to 'your user' and after that you can open the material document and check through which transaction the booking was made.)
    BR
    Csaba

  • Error in MB1C but works perfectly in MIGO for movement type 501.

    Hi
    I get an error in MB1C but works perfectly in MIGO for movement type  501
    here is the error Account 353300 requires an assignment to a CO object.
    I know for this if we add the co object in OKB9 it works.
    But my question is - how it works in MIGO transaction but throws an error in MB1C
    Any idea ? has any one faced this kind of an issue ? Please let me know.
    Thanks
    Dkmurthy

    Hi
    Are the entires same in both the transactions? Means did you check 353300  GL was hit when you posted through MIGO?
    Check in FS00 - for GL account 353300 - under bank/interest tab - double click on field status variant -> under Additional account assignments - CO object is ticked as mandatory?
    Thanks

  • Error in Transfer posting for movement type 303

    Hi Sir,
    I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
    Error in Function:
    Order    not found or not permitted for Goods Movement.
    I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
    Transfer posting
    Transfer posting without reference to a reservation
    The following fields must be populated:
    Material number
    Plant
    Storage location
    Movement type
    Movement indicator
    Quantity in unit of entry
    ISO code unit of measurement for unit of entry
    If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
    Please help me .........
    Regards,
    Krishan

    I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
    With that said our system does require posting date, and batch.  You might check that.   Also check that you've included all the required information in the header.
    Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

  • Field selection for movement type 601 account 894025 differs for cutomer

    While posting goods after saving delivery merror message
    Field selection for movement type 601/aact 894025 differs for customer goods movement
    I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601  KONTO  Optional field
    Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
    I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
    Please provide your valued inputs why this is happening?
    Thanks for your time.
    Rajiv

    Hi Raja,
    Thanks for prompt reply.
    I shall appreciate if you elaborate how to check
    check the Field selection goup in control tab for that GL 
    I tried OBC$--> (Is this correct?)
    I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
    Profit center, cost object are  in G004 as supressed field.
    So should I make optional? So thing will work.
    Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
    Thanks for yr time.
    Rajiv

  • GL account for movement type 309

    How to find GL account for movement type 309. Tcode etc
    Stop Cross-Posting

    Hi,
    Try using transaction code OMWB (press cancel on pop-up) >
    Press "Simulation" button and enter plant + mat + movement type >
    Press "Account assignments" button
    Dr/Cr G/L accounts displayed for posting lines.
    Kind regards,
    Robert

  • For Movement type Enhancement

    Hi All,
    My requirment in Transaction code: MIGO Transfer posting, Movement type is 313
    when we enter material code and plant in the supplying side in MIGO transaction it comes automatically in destination side. In case somebody changes the Material code and Plant at destination side of MIGO transaction then system should show the error message that u201C Destination Material code and Plant must be same as Supplying Material code and Plant for Mov type 313u201D. This error message will restrict the user to change the Material code and Plant at destination side in MIGO transaction.
    Is it possible? if yes..please provide me the Enhancement name or user exist or Badi for this.
    I have tried, but i didn't found. Please help on this.
    Thank You
    Srinu

    Sounds like you're just dumping your spec here. What have you tried exactly to solve this yourself?
    Thomas

  • Account modification key for movement type 643

    Hello Experts,
    I am reaching out to you today as I am in need of some info on Account assignment for Goods issue process. I looked at transaction OMWN or OMJJ for movement type based settings. I am running a business process ' Intercompany stock transfer order'. Goods issue movement on delivery reads 643(Goods issue for cross company), which is picking 'Account modification key' VAX.
    My requirement was how do I force system to pick VAY for 643 without overwriting VAX with VAY in OMWN transaction. Also there are several possibilities listed out for movement 643 alone. Appreciate if you could briefly tell me how system determines other parameters such as 1) Special stock indicator 2)Consumption posting 3) Value string & 4)Counter to determine 'Account modifier' in the customizing table V_156X_KO for Intercompany movement type 643.
    Additional info: Trigger is Stock tarnsfer order type NB. Subsequent process is VL10B for Delivery creation using type NLCC  and Intercompany invoice(IV) for shipping the goods to ordering company code. Then in the receiving company MIGO or goods receipt with reference to outbound delivery and fianlly MIRO or Invoice verification.
    Regards
    SG

    Valuation Structure
    Data on a material is valuated using the following structure:
      Valuation area
      Valuation class
      Valuation category
      Valuation type
      Material type
      Movement type
    Valuation Area
    Organizational level at which material valuation is carried out. You can define a valuation area as
    follows:
      Valuation area = company code
    All stocks of a particular material in this company code are valuated together.
      Valuation area = one plant
    The stocks of a particular material in this individual plant are valuated together. Stocks in
    other plants are not included in this valuation area.
    You define in Customizing the level at which valuation should take place.
    Valuation Class
    You group together different materials with similar properties into valuation classes so that you
    do not have to manage a separate stock account for every material.
    The following table contains examples of possible valuation classes:
    Valuation class Description
    3001 Colors
    3002 Paints
    3030 Operating supplies
    3100 Trading goods
    Which valuation class a material can be assigned to depends on the material type. You can
    define the following assignments in Customizing:
      All materials with the same material type are assigned to just one valuation class.
      Different materials with the same material type are assigned to different valuation classes.
      Materials with different material types are assigned to a single valuation class.
    MM - Material Price Change (MM-IV-MP) SAP AG
    Valuation Structure
    10 April 2001
    A material is assigned to a valuation class in the material master record. The system checks
    whether the material type allows the material to be assigned to the valuation class specified.
    The system refers to the valuation class of a material to determine which stock account to post to
    when a posting is made for this material.
    Valuation Category
    Criterion according to which split valuation is carried out:
      Procurement
    You can valuate a material differently depending on whether it is manufactured in-house
    or procured externally.
      Origin
    You can valuate a material differently depending on where it comes from (such as home
    or abroad).
      Status
    You can valuate a material differently depending on its status (such as new, used,
    repaired).
    You define the valuation categories in Customizing. A material is assigned a valuation category
    in the material master record.
    Valuation Type
    The valuation type specifies the individual characteristic of the valuation category, such as
    internal or external, in the case of Procurement. Within the valuation category Origin, you can
    define the different countries as the valuation types. You define valuation types in Customizing.
    You first determine all the valid valuation types for a valuation category.
    You define in the material master record which valuation types are allowed for a particular
    material. For every material subject to split valuation, you must enter all the valuation types
    allowed in the material master record.
    Material Type
    You assign every material to a material type when you create it. Examples of material types in
    the standard system include raw materials, operating supplies and finished products.
    The material type controls the properties of a material and which data must be maintained for the
    material. The following control features are important for valuation:
      Is the material managed by quantity?
      Is the material managed by value?
      Which price control type may be used for the material?
      Which valuation class can the material be assigned to?
    The system administrator can create or change material types in Customizing.
    Movement Type
    For every material movement, there is a movement type in the SAP System. The movement type
    controls the properties of the movement, for example, which entries you must make when
    SAP AG MM - Material Price Change (MM-IV-MP)
    Valuation Structure
    April 2001 11
    entering a material movement, and which updates are carried out when the movement is posted.
    The following control features are important for valuation:
      Does the material movement cause the quantity to be updated?
      Does the material movement cause the value to be updated?
      Does the material movement lead to postings in Accounting?
      Is the material movement relevant for LIFO/FIFO valuation?
    The system administrator can create or change movement types in Customizing.

  • GL A/C for movement type 309

    How to find GL account (tcode..) for movement type 309

    The way to check the G/L accounts getting hit is to check the material document's FI document. To look for this document, use TCode MB51 with search selection as movement type 309 and execute, it will bring up all material documents created with this movement, double click on any material document No. will take you to display material document, there in header under DOC INFO tab, you will see FI document button click on that, and you can see the G/Ls and the accounting entry getting generated for the said movement.
    Sometimes you will not see any FI document generated for movement 309. The reason is when doing variant adjustment of same price, no accounting document is generated as the prices are same. If the prices are different accounting document is generated.
    Edited by: Afshad Irani on Apr 14, 2010 5:16 PM

  • Account assignment for movement type 221

    Hi,
    Instead of using account suggested by GBB-VBR for movement type 221 we want to use account entered by user in transaction as an offset to inventory account.
    However SAP keeps on hitting account determined automatically (from GBB-VBR) and ignores account entered by user in transaction. In fact account entered by user in transaction is getting replaced by GBB--VBR and is also not available in any table (MSEG etc)
    I have already checked - checkbox "Check account assignment" that states preference to user entered account in transaction, in movement type -- account grouping config but for no use.
    Please help
    Thanks,
    Ashutosh
    Edited by: Ashutosh_x on Apr 6, 2010 7:22 PM
    Edited by: Ashutosh_x on Apr 6, 2010 7:23 PM
    Edited by: Ashutosh_x on Apr 6, 2010 7:25 PM

    In OBYC for Transaction GBB,  instead of BSX,  maintain BSA, VAX & VAY for each Valuation Class of material and its respective G/L Account.
    For example, if you are trying for a FERT material, then the entries should be
    0001::::BSA:::::7920::::::4XXX30
    0001:::VAX:::::7920:::::::5XXX30
    0001:::VAY:::::7920:::::::6XXX30
    Also check in OMJJ whether you have the settings as follows:-
    MvT::S::Val.Upd:::Qty.upd:::Mvt::Cns:::Val.stng:::Cn:::TEKey:::Acc mod:::Check acct.
    561::::::::::::X::::::::::::::::::::::::::::::::::::::::::::WA01:::::2:::::GBB:::::::BSA::::::::::::::::X
    561::::::::::::X::::::::::::::::::::::::::::::::::::::::::::WA01:::::3:::::PRD::::::::PRA:::::::::
    561::::::::::::X::::::::::::X:::::::::::::::::::::::::::::WA01::::::2::::GBB:::::::BSA:::::::::::::::::X
    561::::::::::::X::::::::::::X:::::::::::::::::::::::::::::WA01::::::3:::::PRD:::::::PRA:::::::::
    Check whether your settings are similar to above.
    thanks
    G. Lakshmipathi

Maybe you are looking for

  • Wrong album artwork syncing to iPhone

    on my Mac and from what I've seen on my iPad as well the right album artwork displays but on my iPhone it seems to like mix up the artwork on some songs, some downloaded from iTunes, some ripped from a CD, like I might have a song from Adele but on t

  • How to manage cross-schema job dependencies?

    Hello. I know how to set up a job schedule where one job triggers another job in the same schema, using the <pre> raise_events</pre> attribute on the first job, then using the <pre> event_condition, queue_spec</pre> attributes on the triggered job wi

  • My hard drive fried, and I need to transfer files from iPod to My Music

    I've seen articles on transferring music from an old computer to a new one when you still have the old computer. But, my hard drive completely fried, and I need to know how to transfer the files from my iPod to the new hard drive. I thought I saw an

  • PHOTOSHOP ELEMENTS 6  'HELP' NOT INSTALLED

    I have PSE 6 installed from the Adobe disk on a Mac which uses OS10.5.8. When I try to access the 'PSE 6 HELP' component from the toolbar I see the following - "Could not find the Adobe Help Application.You may need to re-install the application and

  • Error with Listener. ORA-00132: syntax error or unresolved network name

    Hi all, I have been getting a strange error while trying to start the db. SQL> startup nomount ORA-01078: failure in processing system parameters ORA-00119: invalid specification for system parameter LOCAL_LISTENER ORA-00132: syntax error or unresolv