Hyp FR Error: 5200 : Error executing query.  Exceed max row number 100000

Hi,
I am getting the error
5200 : Error executing query. Exceed max row number 100000
when I run the report on Financial Reporting. It gives the same error when run on Workspace.
Have you guys encountered this error before? What are the best ways to tackle it? Help is much appreciated guys.
-- Adi
Edit 1 - I tried to simplify the parameters but I still get the same error making me suspect that the issue is not the 100000 row issue.
Edited by: Aditya26 on Apr 11, 2012 9:02 AM

Hi Adi,
This is from My Oracle Support:
How to Increase Row Limit to Avoid Error "Exceed Max Row Number 100000" [ID 866832.1]
Modified 23-FEB-2012 Type HOWTO Status PUBLISHED
In this Document
Goal
Solution
Applies to:
Hyperion BI+ - Version: 9.3.1.0.00 to 11.1.1.3.00 - Release: 9.3 to 11.1
Information in this document applies to any platform.
Goal
How do you increase the maximum row limit to avoid the error "5200: Error executing query: Exceed max row number 100000"?
Solution
1.Edit \Hyperion\common\ADM\<version>\lib\ADM.properties as follows:
From MAX_ROW_NUMBERS=100000 to MAX_ROW_NUMBERS=500000
If you are running extremely large reports, you can increase the limit.
2.Restart Reporting and Analysis services.
For version 11.1.2.x
The path of ADM.properties file in these versions should be located under:
%Oracle_Home%\Middleware\EPMSystem11R1\commo\ADM\11.1.2.0\lib
Cheers,
Mehmet

Similar Messages

  • FR reports error-5200: Error executing query

    I'm working on FR-11.1.1.3.0238 version. i'm facing issues with some of the reports related to planning application db while launching reports in workspace. Where as the reports are opening with out any issues in FR studio and there is no error message recorded in the studio.The error message is recorded in the workspace related log file.
    I thought that there might be any pov corruption issue so i ran the ManageUserPov utility as well but there is no luck.
    Let me know the cause of this error message and also the resolution for it.
    Below is the error message info,
    *12-12 09:29:10 ERROR jsp     5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException*
    com.hyperion.reporting.util.HyperionReportException: 5200: Error executing query:  java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException
         at com.hyperion.reporting.webviewer.WebDynamicReport.execute(Unknown Source)
    jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrrunjob._jspService(__hrrunjob.java:1411)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:531)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:459)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:159)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:180)
         at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrcheckforpovorprompt._jspService(__hrcheckforpovorprompt.java:1486)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3242)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Thanks in advance
    Edited by: kailash on Dec 13, 2012 5:59 PM

    Neeraj,
    In the FR report server the settings are as you suggested except the TcpTimedWaitDelay = 60, this setting is set to 30.
    The same settings are there in Essbase and Planning servers.
    So i would like to know what exactly is all about the setting and the possible cause of the problem. It would be very helpful if i can get the cause.
    Thanks in advance
    Edited by: kailash on Dec 19, 2012 9:03 PM

  • Error in while Executing Query in the Query Designer

    Hi,
    I  created info Set based two  info object and  three Data Store Objects. and join condition is Left Outer Join.
    there are Business Partner info object, CRM  BP Sales View Info Object and Data Store Objects are  BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
    I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
    and i creted variable for this info object.
    it gives the Error Messages
    Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
    Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
    it is very urgent , can any one help me regarding this.

    Hi Reddy,
    The Error message in english is this
    While reading the data mistakes have appeared. Navigation is possible
    The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
    and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
    Try this and let me know.
    Thanks,
    RK

  • Getting error when we execute query in RSRT1

    Hi Gurus,
    I Loaded Transaction data in "0CCA_C11" cube and also loaded master data too.
    but when i execute query in RSRT1 i am getting error message
    1) Could not enter feature 0COSTCENTER__0PROFIT_CTR with SID 133 into table /BI0/SIOBJNM
    2)System error in program CL_RSR and form GET_CHANMID-02- (see long text)
    3)Error when generating dataProvider.
    For 0COSTCENTER i loaded master data but for '0PROFIT_CTR' i am unable to load Hierarchy data because still the request is yellow even showing 58 from 58 records.
    can any once can help me to soleve this issue.
    Thanks in advance.
    Raju.k
    *points to be assigned.

    Raju,
      Try replicating your hierarchy DS and reload data.
    hope it helps,
    balaji

  • Error 0DAT while executing query

    Hello All,
    While executing query in query designer I am getting following error.
    Component 0DAT version A does not exists in the database.
    Can any one please let me know how to rectify this error.
    Points will be rewarded.

    Hello,
    Thanks for your prompt reply.
    I am looking for 0DAT in BC (object type) but could not able to find it.
    I am new in BW :
    Do I have to search BC in r/3 and replicate in BW then install and activate it ?or I will find in BW only?

  • Error message in the report: Exceeded configured maximum number of allowed

    Hi,
    When i'm running one report, it's throwing the following error.
    Error
    View Display Error
    Exceeded configured maximum number of allowed input records.
    Error Details
    Error Codes: EKMT3FK5:OI2DL65P
    SQL Issued: 3302~v9p2gfbm0sfk91lrj16oe7srm2
    This is most common error. my report is retreiving 469,501 rows in the database.
    These are the settings in the instanceconfig.xml :
    <Views>
    - <Pivot>
    <MaxPagesToRollOutInDelivery>1000</MaxPagesToRollOutInDelivery>
    <MaxVisibleColumns>500</MaxVisibleColumns>
    <MaxVisiblePages>2500</MaxVisiblePages>
    <MaxVisibleRows>1000000</MaxVisibleRows>
    <MaxVisibleSections>10000</MaxVisibleSections>
    <DefaultRowsDisplayed>1000000</DefaultRowsDisplayed>
    - <!-- This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control
    -->
    <DefaultRowsDisplayedInDelivery>1000</DefaultRowsDisplayedInDelivery>
    - <!-- This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control
    -->
    <DefaultRowsDisplayedInDownload>100000</DefaultRowsDisplayedInDownload>
    - <!-- This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control
    -->
    <DisableAutoPreview>false</DisableAutoPreview>
    </Pivot>
    Max visible rows are higher than my report rows, but still it is throwing error.
    Please any suggestions !!!!
    Thanks in Advance

    Just in case try to set other views and see how it works
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/answersconfigset.htm#CIHHBHEB
    In WebLogic FMW Control or EM:
    http://server.domain:7001/em
    Click on Fam_bifoundation_domain -> Business Intelligence -> coreapplications -> Capacity Management -> Performance
    Maximum Number of Rows Processed when Rendering a Table View
    Number Of Rows:
    Maximum Number of Rows to Download
    Number Of Rows

  • Error 5200 Error executing query

    The rest of the message reads...
    "...the form grid is invalid. verify that all members selected are in Essbase. Check log for details.com.hyperion.planning.hspexception.?
    I am using Hyperion reports to connect to a Hyperion Planning application. I noticed then I select only one member from this dimension, I do not get this error message and I get the report as what I wanted but if I select level 0 or descendants from the dimension, I get the error. I have applied some suppression to the rows and this form grid is also extracting some cell text information.
    Please help. thanks.

    I did a full refresh from planning to essbase and I still got that error. It seems to happen to only a certain branch of the dimension.
    Is there a way to select level 0 of a particular branch of the dimension? (similar to calc script @relative() function)
    The error message does not appear if I select only one member and the dimension I am reporting is huge, too tedious to hunt down the errant member/branch.

  • Error message in executing query

    Hi
    There is one query which was working fine initially but sudeenly after making some changes it is giving the error message
    Diagnosis
    This internal error is a targeted termination since the program has an
    incorrect status.
    I tried RSRT but it still does not help, giving the same message.
    Please advise is there any other way to get this query working again.
    Thanks in advance.
    Regards,
    Kate.

    Hi Bahnu,
    Thanks for your reply. I am able to access the query definition in the Bex analyser and I am able to execute it till the selection screen but after that it gives me the message:
    System error in program CL_RSDM_READ_MASTER_DATA and form
    sidvaldirect_read2
         Message no. BRAIN299
    Diagnosis
    This internal error is a targeted termination since the program has an
    incorrect status.
    Procedure
    Analyse the situation and inform SAP.
    I think the problem happened when someone else was trying to edit the query from Bex Designer when I was trying to
    edit in the Bex Analyser.
    Can you suggest what can be done to resolve it.
    Even I tried creating a copy and executing it but both give the same error.
    Many Thanks.
    Kind Regards,
    KAte.

  • Error occurred when executing query involving cross join or outer join

    Hi,
    I tried to execute the following query:
    select count(*)
    from
         po,
         invoice,
         table(xmlsequence(extract(invoice.content, '/CommercialInvoice/Body/LineItemDetails/LineItem'))) invoice_line_item
    where
         extractValue(po.content, '/PurchaseOrder/Header/DocumentID/RID') =
         extractValue(value(invoice_line_item), '/LineItem/Product/PurchaseOrderIdentifier/documentCreatorIdentifier')(+)
    It produced the following error:
         Error: ORA-00936: missing expression
    Then I change the query to:
    select count(*)
    from
         po left outer join
              invoice cross join
              table(xmlsequence(extract(invoice.content, '/CommercialInvoice/Body/LineItemDetails/LineItem'))) invoice_line_item
         on
              extractValue(po.content, '/PurchaseOrder/Header/DocumentID/RID')
              = extractValue(value(invoice_line_item), '/LineItem/Product/PurchaseOrderIdentifier/documentCreatorIdentifier')
    It produced the following error:
         Error: ORA-00904: "INVOICE"."SYS_NC0012900130$": invalid identifier
    If I simply the query to:
    select 1
    from
         invoice cross join
         table(xmlsequence(extract(invoice.content, '/CommercialInvoice/Body/LineItemDetails/LineItem'))) invoice_line_item
    It also produced the following error:
         Error: ORA-00904: "INVOICE"."SYS_NC0012900130$": invalid identifier
    What is the cause of the problem? How to resolve it?
    The version I am using is 10.1.0.2.0 on Windows. Any help would be much appreciated.

    Hi,
        Recently we went for BW upgradatiaon (BI7.0) , the error you are facing could be due to the following issue,
        If infoobjects are used in infoset as infoprovider ( in BW3.5) after upgrade this infoobjects will not be selected automatically as infoproviders. So it will not be available for Infoset.
    Please check whether any infoobjects are used as infoprovider, if so manually change them as infoprovider ( In BI7) and activate.
    Since, few reports are working on the infoset , this could be those reports are not using the fields from the infoobjects. so it is working it seems.
    Please check and let me know.
    Thanks,
    V.Senthil

  • Error when seelcting serial numbers - Matrix - invalid row number

    When selecting serial numbers in the Inventory posting screen, we are getting the following error.  can you please assist.
    HDserialselection:0: Matrix - invalid row number

    The error message sounds like from Add-on, not B1.  Do you have any add-on installed?
    Thanks,
    Gordon

  • 5200 : Error in executing  query -- Hyperion Financial Reporting

    Problem in accessing the Hyperion Financial Reports.User is having full access and able to access all the folders except one folder(Legal Folder reports). We are getting 5200: Error Executing the query error. Recently we have upgraded Hyperion to 11.1.1.3 version . Before upgrade user is not facing the problem. After Upgrade user is getting these errors while accessing the reports. we did research and found in "Error 5200: Error Executing Query" When Viewing Financial Reporting (FR) Reports". Is this error is relevant to the Information provided in Metalink and also can you please tell us is there any impact on doing the solution provided in the below. Why is this error is coming is any preferences needs to be changed.Please help us on this.
    Error Description:
    5200: Error executing query
    Servername/ApplicationName/DatabaseName/Error(1007090) Unknown Member name [Current Point of view for years] in Outline Query
    Doc ID 1107142.1:
    Possible Cause 1:
    If members have recently been added, moved, or deleted from the data source, Essbase, HFM, or Planning, the existing User POV records become out of sync.
    The User Point of View record uses indexing to identify the member. If the index changes because of changes in the outline, the User Point of View record no longer points to the correct location in the outline.
    To resolve the issue, you need to run the ManageUserPOV utility on a Windows server that has the Financial Reporting Reports Server, or in a Unix or Linux environment, has the Financial Reporting Print Server installed.
    You will need to provide a BIPlus Global Administrator user ID and password to run the utility.
    The utility will provide the correct syntax to run the command.
    1. In \Hyperion\products\biplus\bin\ManageUserPOV.properties, specify the following parameters:
    a. ReportServer
    b. DatasourceUser
    c. DatasourcePassword
    d. User
    e. Datasource (You can find the datasource in Workspace under Tools>Database Connection Manager in the Name column.)
    2. From the command line, cd to Hyerion\products\biplus\bin
    3. Type in "ManageUserPOV" without the quotes. The executable will read the parameters previously set in the ManageUserPOV.properties file.
    Thanks,
    Naresh.

    Take a look at this: http://adistrategies.com/index.php?loc=knowledge1&item=291
    Hope it helps.
    Mehmet

  • 5200: Error executing query: The data form grid is invalid.

    Hi,
    I am getting this error " 5200: Error executing query: The data form grid is invalid. Verify that all members selected are in Essbase. Check log for details.
    com.hyperion.planning.HspException;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name="Profit " dsid="228af2c3_129ca3dd85c_-77b1" allowEdit="1"><dim name="Period" dimIndex="1" dsName="Profit " keyDimName="Period" memberName="Apr" displayName="Period: Apr"/><dim name="Year" dimIndex="2" dsName="Profit " keyDimName="Year" memberName="FY10" displayName="Year: FY10"/><dim name="Entity" dimIndex="5" dsName="Profit " keyDimName="Entity" memberName="9999" displayName="Entity: 9999"/></datasource></datasources>"
    I have checked that both the systems essbase and planning are same. nothing's different. still i cannot find the exact reason why the report is not working.
    can any please help me.
    btw, i am using Hyperion Planning 9.3.1
    Thanks,
    BIMS

    Hi
    You probably deleted some members from outline that are used by report
    I would recommend you to open you report/grid via rep.client and try to find which elements are abcent
    Regards
    Alexander
    Edited by: Softperson on 19/8/2010 17:38

  • Warning  Query has exceeded 200 rows. Potentially more rows exist...

    Hi all,
    I am getting a following warning message on every page.
    Query has exceeded 200 rows. Potentially more rows exist, please restrict your query.
    In my code whatever VO i am using doesnt fetch more than 50 records still I am getiing warning as Query exceeded 200 rows.
    Even on helloWorld Page from Tutorial.jpr also I am getting the same warning.
    Any suggestions , how to remove it.
    Thanks and Regards,
    Anant.

    Its an oracle instance system profile. It will be in effect whether you are testing the page from jdev or the instance.
    --Shiv                                                                                                                                                                                                                                                                   

  • Re: Report Shows Exceeded maximum Rows

    ee9691f9-2554-4429-a56e-4e2e21dd869f wrote:
    Hi,
    I have a report it is taking more time and shows exceeded max rows so i checked in
    em->capacitymanagement->performance->max no fo rows is 3,50,000
    and i checked in instance config file every thing is fine
    so any help from you guys,
    Thanks in
    Advance
    We only know what you post & so far you have posted NOTHING of any value.
    For all we know this mythical report may be running against a MS SQL Server database.
    How do I ask a question on the forums?
    https://forums.oracle.com/message/9362002#9362002

    Select customize and set the number of rows to 9999. I'm guessing that it's currently set to 10.

  • 5200: Error executing query: in report (Workspace - Hyp Financial Report)

    I tried to open a report in the workspace and this error appeared only in an environment in other open properly, the reports are the same.
    Appears Only "5200: Error executing query: in report"
    What can I do?

    The below link may be provide some insight:
    5200: Error executing query: Invalid Item ID. Pls help
    Also check log file for details about the error you are getting so as to get more information.

Maybe you are looking for

  • Connect to SAP Cluster Gateway failed

    Hi all, We have outbound idoc from SAP clusters for further configuration. We have java applications deployed in IBM WebSphere Application Cluster (WAS_A and WAS_B) At SAP side, we have 2 SAP instance, CI and DI with ACSC configuration, For the gatew

  • I can't drag selected items in to mission control using the 3 finger swipe in 10.7.2

    After upgrading to 10.7.2 I cannot drag items from the finder to mission control anymore. I used to select the items I wanted, click to drag and then swipe three fingers to show Mission Control and then drop the items in to the selected app/folder. N

  • Revolution Theme Background Shadows or Image Mask

    Hello Again. Despites wise advise of ¨just call me dude¨I obtain what I need, He oppens a new interrogative. How to modify background´s image mask. It drops some kind of shadow at the upper right side of the image and become´s dark in that place. Tha

  • Upgrading RDC from 8.5 to 11 (or 12)

    Post Author: LeisureTime CA Forum: General I have a VB6 application that utilizes the RDC to generate a large report with perhaps 80 subreports. Here are my questions about upgrading to VB.NET and Crystal Reports version 11 or 12: 1. How easy is the

  • BI 7 Performance

    Hi, Which functions of BI 7.0, except DTP, Transformations, BIA, can helpful in increasing the performance of the BI System? Regards SMS.