Hyperion 11 Installation -Shared Service registration is failed for essbase

Hi All,
Today, i was installing Hyperion 11 EPMA system. Here is my scenario:
Installed and configured "Foundation" on one system. Installed "Essbase" products on another system in the same network (Not installed HbNet components). While configuring Essbase products it never asked for Shared Services Server location and hence the essbase products registration with Shared services is failed at the end.
I checked in the services of second system and wonder to see "OpenLDAP" service is running. (I was not able to uncheck "Hyperion Foundation" product options during Essbase product configuration).
I have given the same database schema details used to configure database for the shared services. Am i missing anything. Please help.
Thanks,
Pr

It seems you have server1 for foundation services and server2 for essbase only.
Try this scenario with the following steps:
1.For server1, Install and configure your database , Install and configure your foundation services.
after your done with server1
2.for server2, Install and configure foundation services. Point your database to server1.
after your done successfully, with no errors.
Proceed to installation and configuration of essbase products.
Regards,
LYN

Similar Messages

  • Hyperion 11 Installation-Shared Services registration is failed for Essbase

    Hi All,
    Today, i was installing Hyperion 11 EPMA system. Here is my scenario:
    Installed and configured "Foundation" on one system. Installed "Essbase" products on another system in the same network (Not installed HbNet components). While configuring Essbase products it never asked for Shared Services Server location and hence the essbase products registration with Shared services is failed at the end.
    I checked in the services of second system and wonder to see "OpenLDAP" service is running. (I was not able to uncheck "Hyperion Foundation" product options during Essbase product configuration).
    I have given the same database schema details used to configure database for the shared services. Am i missing anything. Please help.
    Thanks,
    Pr

    Hi Hohn,
    Thanks for your response.
    I'm little confused the way to configure EPM products in a distributed environment. Registration of essbase related product with shared services is still failing even mentioned to use "Previously configured shared services database" on Shared services and Registry database page.
    From the installation guide: 1. Using the database administration console, change the password of the user account that was used to configure the Shared Services database.
    2. Do i need to stop shared services web application and OpenLDAP while configuring "Essbase" products on another system.
    Please address the above points and help.Thanks!!
    Regards,
    pr

  • Sync Shared Services External users & Provisioning for Essbase Applications

    Hi Experts !!
    i have externalised user authentication in Shared services . I provisioned all users for Essbase and refresh the security from Essbase ,So all users are working fine
    and can login in Essbase and "Excel add-in" as well..
    but there is one user who is still not working for "Excel Add in"..
    Error is "Login failed due to invalid login credentials"
    Please suugest me the solutions
    Thank you.

    Hi John !
    Yes, User can login in EAS .
    Also User is available under Users in EAS ,But no applications are displaying in Analytic Server , While I have given Administration Privileges for Essbase app.
    But still error while login in Excel add in ..
    Error : Login failed due to invalid login Credentials.
    Also ,After Provisioning , How Can we Sync all all Externalized users from Shared Services itself for All hyperion Projects ???
    Thank you

  • Shared services- Access Assign issue for Essbase

    Hi All,
    I need to associate Filter with a group in Shared Services, but when I go to Application Groups, right click on the Application name and select "Assign access control", but in the list of Groups that come in the very first window, i dont see all the grousp listed there, has anyoen seen thsi issue before and knows teh fix for it?

    We dont have direct Role provisioning to teh groups. Here we actualy have a group AllUsers and have added all other grousp as "GRoup membere" to thsi group/ Now this AllUsers group has teh roel provisioned to it. So in such a case, to see the grousp listed under "Assign Access Control" do they need to eb provisioned individually as well at group level, or teh above scenario that I mentioned also works fine?

  • Shared Services Assign Access Control for Essbase

    Hi we have a used who has his provisioning in form of filters in essbase group. I tried assigning his filter to thim through Assign Access Control in shared services. I'm able to see the user and also the the filter I created for the user but when I try to assign it to him and save it is really not getting assigned. It still stays the user doesnot have any filters assigned to his account. Am I missing anything.
    Thank you.

    Have you given maxl a try:
    grant filter appname.dbname.filtername to user;
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Shared Services Registration Failed While Re-Configuring EAS

    Hi
    I was re-configuring EAS and my shared services and deployment failed.I reached out to oracle and they gave me a solution to delete the HBR instances.
    But when I try to open the url in microsoft word it opens in html format .And i am unable to delete any HBR instance.What is the correct way to do it?
    The solution offered by Oracle Support:
    To resolve this issue, do the following steps:
    1. Log into the User management console using the URL http://localhost:58080/interop/index.jsp.
    2. Append the URL to show the files http://localhost:58080.interop/content/files
    3. Copy this URL and open in Microsoft Word. (file->open option in MS Word)
    4. Provide username (admin) and password (password).
    5. Check in AdminProjects, Products and Projects folders for the files and folders related to HBR and delete any occurences.
    6. Save and close the file.
    7. Restart the services.
    8. Configure EAS with Shared Services using the config utility.
    9. For Business Rules to work, go to \Hyperion\AnalyticAdministration\storage\easuser location and delete all contents from the easusers folder.
    10. Restart the EAS server.
    Thanks
    Z

    I never really used the method with word and always used davexplorer which can be downloaded from http://www.davexplorer.org/download.html
    Follow the rest of the instructions which you posted to delete HBR.
    Cheers
    John

  • Shared services registration failed in HFM 11.1.1.3

    We have installed the following products on the following
    servers
    1) Shared services server Repository : Oracle 11g installed
    in 64 - bit Enterprise Linux.
    2) 64 Bit HFM Installation in Windows 2003 Server.
    3) Shared services installation done in Windows 2003 32-bit
    OS.
    4) IIS is up & running in the same (Windows 2003 Server- 64
    Bit) where HFM is installed.
    5) Also the shared services is accessible by using the URL
    ( in the Windows 2003 Server- 32 Bit)
    **We are facing a problem with during the Web server configuration for HFM & shared services registration.**
    the following system installers are also used :
    1) V17382-01 (64 BIT SYSTEM INSTALLER)
    2) V17397-01 (64 BIT FOUNDATION SERVICES 1)
    3) V17369-01 (64 BIT FOUNDATION SERVICES 2)
    4) V17370-01 (64 BIT FOUNDATION SERVICES 3)
    5) V17372-01 (64 BIT FOUNDATION SERVICES 4)
    Thanks in advance!!!

    Sorry to have forgotten one more installable:
    6) V17365-01.zip ( 64 Bit HFM installable)
    Also if the ISS server is running in the 32-bit mode , does it affect the EPM configuration??
    How do i check whether the IIS server is running in the 32 bit Mode or 64 - bit Mode.

  • The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU - SharePoint Foundation 2013

    After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 Secure Store Service         
     Secure Store                   g0n6 High     The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
    trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.   at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
    operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
    e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
    has expired or Secure Store Shared Service is not supported for this SKU.    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)    
    at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     Getting Error Message for Exception System.Web.HttpUnhandledException
    (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage)     at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)    
    at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.86  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        aat87 Monitorable   b3b6e19b-7de2-e016-ad32-0fc975829ef0
    Is it a bug or any issue in configuration?
    Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
    Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.

    Hello
    something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
    1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
    1>  MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
    2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
    2>  Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
    2>  Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
    2>  Copying all files to temporary location below for package/publish:
    2>  obj\Debug\Package\PackageTmp.
    2>  Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
    2>  Adding sitemanifest (sitemanifest).
    2>  Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding declared parameter 'IIS Web Application Name'.
    2>  Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
    2>  file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
    2>  To get the instructions on how to deploy the web package please visit the following link:
    2>  http://go.microsoft.com/fwlink/?LinkId=124618
    2>  Sample script for deploying this package is generated at the following location:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
    2>  For this sample script, you can change the deploy parameters by changing the following file:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
    2>  Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
    3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    3>Active Deployment Configuration: Deploy App for SharePoint
    3>Uninstall app for SharePoint:
    3>  Skipping the uninstall step because the app for SharePoint is not installed on the server.
    3>Install app for SharePoint:
    3>  Uploading the app for SharePoint...
    3>  Creating a trusted root authority in SharePoint for IIS Express.
    3>  Installation is in progress (00:00:00)
    3>  Installation is in progress (00:00:01)
    3>  Installation is in progress (00:00:02)
    3>  Installation is in progress (00:00:03)
    3>  Installation is in progress (00:00:05)
    3>  Installation is in progress (00:00:06)
    3>  App failed to install, cleaning up...
    3>  App installation cleanup failed due to errors.  Please see the app on the SharePoint site’s “Site Contents” page for details.
    3>  App installation encountered the following errors:
    3> 
    3>  @"Error 1
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3> 
    3>  @"Error 2
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
    ========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
    ========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========

  • EPM 11 - Issue with Shared Services Registration and DB configuration

    Hi,
    Im installing Oracle EPM 11.1.1...
    I have successfully installed Foundation Services and Essbase Server/Client...
    But I'm facing two issues...
    1. I couldnt able to register any products to the Shared Services except for Essbase Server
    I tried restarting the services (1) Hyperion Foundation OpenLDAP, (2) Hyperion Foundation Shared Services - Web Application in the same order...
    2. I couldnt able to configure Oracle 10.2.0.1.0 for Essbase Administration Services...
    It shows the below error...
    "com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
    com.hyperion.interop.lib.OperationFailedException: Registeration failed: null.Registeration failed: null.
         at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
         at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
         at com.hyperion.cis.config.CmsRegistrationUtil.registerApplication(CmsRegistrationUtil.java:200)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:427)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:212)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.Exception: Registeration failed: null.Registeration failed: null.
         at com.hyperion.cis.config.CmsRegistrationUtil.registerApplication(CmsRegistrationUtil.java:212)"
    But I could use the same version of Oracle database successfully for Shared Services and Essbase Studio database configuration...
    Please help me to resolve this issue....
    Thanks & Regards,
    dmaze

    Hello!
    During your first configuration of the EPM System Fusion Edition, configure the two conponents first - COMMON SETTINGS and CONFIGURE DATABASE. Never configure other components together with these two (especially Workspace). After you have configured these two, then you can rerun the configuration utility and configure the components that you left out.
    Hope this helps.
    Cheers!

  • Hyperion S9 Shared Services service stops automaticaly

    Hi,
    I have installed and configured Hyperion Shared Services 9.3.1 alone on one server. When I restart the services , The service Hyperion S9 OpenLDAP works perfectly, whereas Hyperion S9 Shared Services does not. Once I do a refresh the status is again stopped. And I have to reset IIS and start and stop the services several times before it become stable. Any idea what could be the problem?
    Thanks
    Ramya

    Hi John,
    I tried to stop and start it from Start Menu. Stopping was normal took few seconds. But starting looks problematic. The process started at 6.15 AM UK time today and is still running. It is 7.10 AM UK time now.
    The prompt seems to be frozen, I am pasting whatever it had
    07-Apr-2010 06:15:37 org.apache.coyote.http11.Http11Protocol init
    INFO: Initializing Coyote HTTP/1.1 on http-58080
    07-Apr-2010 06:15:37 org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 906 ms
    07-Apr-2010 06:15:37 org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    07-Apr-2010 06:15:37 org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/5.0.28
    07-Apr-2010 06:15:38 org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    07-Apr-2010 06:15:38 org.apache.catalina.core.StandardHost getDeployer
    INFO: Create Host deployer for direct deployment ( non-jmx )
    07-Apr-2010 06:15:38 org.apache.catalina.core.StandardHostDeployer install
    INFO: Installing web application at context path /interop from URL file:D:\Hyper
    ion\deployments\Tomcat5\SharedServices9\webapps\interop
    07-Apr-2010 06:15:39 com.hyperion.bpm.logon.CSSAuthenticate initializeCSS
    INFO: Initializing security framework
    log4j:WARN No appenders could be found for logger (com.hyperion.css.CSSSystem).
    log4j:WARN Please initialize the log4j system properly.
    07-Apr-2010 06:15:40 com.opensymphony.oscache.general.GeneralCacheAdministrator
    <init>
    INFO: Constructed GeneralCacheAdministrator()
    07-Apr-2010 06:15:40 com.opensymphony.oscache.general.GeneralCacheAdministrator
    createCache
    INFO: Creating new cache
    Attempting to verify the database configuration
    log dir isD:\Hyperion\logs\SharedServices9
    Attempting to verify the database configuration
    urlManifest jar:file:/D:/Hyperion/deployments/Tomcat5/SharedServices9/webapps/in
    terop/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
    Shared Services Version: 9.3.1.0.45
    Shared Services Drop Number: 9
    Memory in use[3208 kb] = Total memory available[143589 kb] - Free memory availab
    le[140381 kb]
    Memory in use[3208 kb] = Total memory available[143589 kb] - Free memory availab
    le[140381 kb]
    Database configuration test passed.
    07 Apr 2010 06:15:42 - org.apache.slide.common.Domain - INFO - Auto-Initializing
    Domain
    07 Apr 2010 06:15:42 - org.apache.slide.common.Domain - INFO - Configuration fou
    nd in classpath
    07 Apr 2010 06:15:42 - org.apache.slide.common.Domain - INFO - Domain configurat
    ion : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apa
    che.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=t
    rue, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=D:/Hyperion/dep
    loyments/Tomcat5/SharedServices9/config/Domain.xml}
    configURL: file:///D:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xm
    l
    Done initialize: com.hyperion.css.CSSAPIImpl@9be2b5
    07-Apr-2010 06:16:01 org.quartz.impl.jdbcjobstore.JobStoreSupport initialize
    INFO: Using thread monitor-based data access locking (synchronization).
    07-Apr-2010 06:16:01 org.quartz.impl.jdbcjobstore.JobStoreSupport cleanVolatileT
    riggerAndJobs
    INFO: Removed 0 Volatile Trigger(s).
    07-Apr-2010 06:16:01 org.quartz.impl.jdbcjobstore.JobStoreSupport cleanVolatileT
    riggerAndJobs
    INFO: Removed 0 Volatile Job(s).
    07-Apr-2010 06:16:01 org.quartz.impl.jdbcjobstore.JobStoreSupport recoverJobs
    INFO: Freed 0 triggers from 'acquired' / 'blocked' state.
    07-Apr-2010 06:16:01 org.quartz.impl.jdbcjobstore.JobStoreSupport recoverJobs
    INFO: Recovering 0 jobs that were in-progress at the time of the last shut-down.
    07-Apr-2010 06:16:01 org.quartz.impl.jdbcjobstore.JobStoreSupport recoverJobs
    INFO: Recovery complete.
    07-Apr-2010 06:16:01 org.quartz.impl.jdbcjobstore.JobStoreSupport recoverJobs
    INFO: Removed 0 stale fired job entries.
    07-Apr-2010 06:16:01 org.quartz.impl.jdbcjobstore.JobStoreTX initialize
    INFO: JobStoreTX initialized.
    07-Apr-2010 06:16:01 org.quartz.impl.StdSchedulerFactory instantiate
    INFO: Quartz scheduler 'CESScheduler' initialized from an externally provided pr
    operties instance.
    07-Apr-2010 06:16:01 org.quartz.impl.StdSchedulerFactory instantiate
    INFO: Quartz scheduler version: 1.3.0
    07-Apr-2010 06:16:01 org.quartz.core.QuartzScheduler start
    INFO: Scheduler CESScheduler_$_PVUKTSTGCSAPP021270617360856 started.
    07-Apr-2010 06:16:03 org.apache.struts.tiles.TilesPlugin initDefinitionsFactory
    INFO: Tiles definition factory loaded for module ''.
    07-Apr-2010 06:16:03 org.apache.struts.tiles.TilesPlugin initDefinitionsFactory
    INFO: Factory already exists for module ''. The factory found is from module ''.
    No new creation.
    07-Apr-2010 06:16:03 org.apache.struts.tiles.TilesPlugin initDefinitionsFactory
    INFO: Factory already exists for module ''. The factory found is from module ''.
    No new creation.
    07-Apr-2010 06:16:03 org.apache.struts.validator.ValidatorPlugIn initResources
    INFO: Loading validation rules file from '/WEB-INF/css/validator-rules.xml'
    07-Apr-2010 06:16:03 org.apache.struts.validator.ValidatorPlugIn initResources
    INFO: Loading validation rules file from '/WEB-INF/css/css-custom-validator-rule
    s.xml'
    07-Apr-2010 06:16:03 org.apache.struts.validator.ValidatorPlugIn initResources
    INFO: Loading validation rules file from '/WEB-INF/css/validation.xml'
    Shared Services Initialized Successfully
    07-Apr-2010 06:16:04 org.apache.coyote.http11.Http11Protocol start
    INFO: Starting Coyote HTTP/1.1 on http-58080
    07-Apr-2010 06:16:04 org.apache.jk.common.ChannelSocket init
    INFO: JK2: ajp13 listening on /0.0.0.0:58082
    07-Apr-2010 06:16:04 org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/32 config=null
    07-Apr-2010 06:16:04 org.apache.catalina.startup.Catalina start
    INFO: Server startup in 27078 ms
    Memory in use[9199 kb] = Total memory available[228524 kb] - Free memory availab
    le[219325 kb]
    Memory in use[9199 kb] = Total memory available[228524 kb] - Free memory availab
    le[219325 kb]
    Memory in use[9198 kb] = Total memory available[224198 kb] - Free memory availab
    le[215000 kb]
    Memory in use[9198 kb] = Total memory available[224198 kb] - Free memory availab
    le[215000 kb]
    Memory in use[9196 kb] = Total memory available[226885 kb] - Free memory availab
    le[217689 kb]
    Memory in use[9196 kb] = Total memory available[226885 kb] - Free memory availab
    le[217689 kb]
    Memory in use[8639 kb] = Total memory available[224198 kb] - Free memory availab
    le[215559 kb]
    Memory in use[8639 kb] = Total memory available[224198 kb] - Free memory availab
    le[215559 kb]
    Memory in use[8355 kb] = Total memory available[225574 kb] - Free memory availab
    le[217219 kb]
    Memory in use[8355 kb] = Total memory available[225574 kb] - Free memory availab
    le[217219 kb]
    Memory in use[8328 kb] = Total memory available[224198 kb] - Free memory availab
    le[215870 kb]
    Memory in use[8328 kb] = Total memory available[224198 kb] - Free memory availab
    le[215870 kb]
    Memory in use[8328 kb] = Total memory available[224788 kb] - Free memory availab
    le[216460 kb]
    Memory in use[8328 kb] = Total memory available[224788 kb] - Free memory availab
    le[216460 kb]
    Memory in use[8328 kb] = Total memory available[224198 kb] - Free memory availab
    le[215870 kb]
    Memory in use[8328 kb] = Total memory available[224198 kb] - Free memory availab
    le[215870 kb]
    Memory in use[8328 kb] = Total memory available[224526 kb] - Free memory availab
    le[216198 kb]
    Memory in use[8328 kb] = Total memory available[224526 kb] - Free memory availab
    le[216198 kb]
    Memory in use[8328 kb] = Total memory available[224460 kb] - Free memory availab
    le[216132 kb]
    Memory in use[8328 kb] = Total memory available[224460 kb] - Free memory availab
    le[216132 kb]

  • Is there any way to launch Shared Services in command prompt for migration?

    Hi All,
    We are on 11.1.1.1.3 Is there any way to launch Shared Services in command prompt for migration purposes? The purpose is we need to automate the migration process from Dev to Prod. Currently we are exporting artifacts by using LCM in shared service by file management and then exporting that folder to prod server and then importing by using LCM. So we need to automate the whole process.
    So is there any way we can launch shared services/LCM in command prompt to launch the migration for export/import artifacts?
    Any suggestions will be great help.

    Did you see the bit in the documentation called "Creating Migration Definitions"?
    See: http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_lifecycle_management/ch06s03s01.htm
    Also, if you follow this link, the docs explain how to (sort of) generate the xml:
    http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_lifecycle_management/ch06s03.htm
    Regards,
    Cameron Lackpour

  • Shared services registration failing during configuration of EPMA 11.1.1.3

    Hi All, I am currently woking on essbase and no knowledge of planning so trying to upgrade my knowledge. I installed epma 11.1.1.3 on windows 2003 VMware work station as I have windows 7 laptop. installed oracle 10g created a database (epma) created user/schemas (sm,ms) trying to configure foundation services, essbase, planning and reporting and analysis. the configure database and register with shared services failed. Am I doing anything wrong. I followed some documents for configuration which are well documented with screen shots still do not know what wrong I am doing. Please advice on how to avoid these failures.
    Below is the validation results of the configuration.
    Thanks in advance.
    Srinivas
    Oracle EPM System
    Diagnostic Reports
    Generated on 3/3/12 11:05 PM
    Validation run on srinivas
    Validation tool info: 11.1.1.3.0 drop 9-0 build 3129 on 07/16/2009 01:24 PM
    OS name: Windows 2003
    OS version: 5.2
    Test Status Service Test Description Duration
    Hyperion Foundation
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    relationalStorageConfiguration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks 0 s
    FAILED OPN: OpenLDAP Check if global roles number no less than 16
    Error: $item.exception.localizedMessage
    Recommended Action: 0 s
    FAILED OPN: OpenLDAP Connection to OpenLDAP
    Error: srinivas:28089
    Recommended Action: Start open LDAP 1 s
    ERP Integrator
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Essbase / Client
    PASSED WR: Windows Registry Check if EQD excel addin registered for Essbase Client 0 s
    Essbase / Essbase
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks 0 s
    FAILED EAS: Essbase server Essbase Server startup check using Maxl command
    Error: Result: Unable to connect Essbase Server using MAXL command. Please check that essbase server is running.
    Recommended Action: Check Essbase Server is started. 0 s
    FAILED SVR: Essbase Java API Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** srinivas http://srinivas:13080/aps/JAPI
    Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at srinivas. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
    Recommended Action: Make sure external checker is working. 7 s
    Essbase / Essbase Administration Services
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Essbase / Provider Services
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks 0 s
    Essbase / Smart Search
    PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
    Essbase / Studio
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Financial Data Quality Management
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Foundation / Calculation Manager
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Foundation / Performance Management Architect
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Foundation / Workspace
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    PASSED HTTP: Http Is file [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] empty 0 s
    PASSED HTTP: Http Check string [LoadModule jk_module modules/mod_jk] in file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
    PASSED REG: Registry All links are present in registry. 0 s
    Performance Scorecard
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Planning
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    applicationServerDeployment: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Profitability and Cost Management
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Strategic Finance
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Financial Management
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Reporting and Analysis
    PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
    FAILED SVR: Essbase Java API Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** srinivas http://srinivas:13080/aps/JAPI
    Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at srinivas. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
    Recommended Action: Make sure external checker is working. 3 s
    Test start time: 11:05:18 PM
    Test end time: 11:05:40 PM
    Total test duration: 21 s

    Thanks to all for your suggestions. Below is the log I have checked at the first instance of failure after that resitering with shared services failed for every product. Is this something to do withis database connection? Please advise on how to resolve it.
    Mar 6, 2012 10:48:54 AM org.apache.coyote.http11.Http11BaseProtocol init
    INFO: Initializing Coyote HTTP/1.1 on http-28080
    Mar 6, 2012 10:48:54 AM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 3531 ms
    Mar 6, 2012 10:48:54 AM org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    Mar 6, 2012 10:48:54 AM org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Hyperion Embedded Java Container/1.0.0
    Mar 6, 2012 10:48:55 AM org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    log dir isC:\Hyperion\logs\SharedServices9
    urlManifest jar:file:/C:/Hyperion/deployments/Tomcat5/SharedServices9/webapps/interop/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
    Shared Services Version: 11.1.1.3.24
    Shared Services Drop Number: 6
    Attempting to verify the database configuration
    Attempting to verify the database configuration
    Database configuration test passed.
    06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
    06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
    06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=C:/Hyperion/deployments/Tomcat5/SharedServices9/config/Domain.xml}
    configURL: file:///C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml
    Done initialize: null
    06 Mar 2012 10:50:35 - org.apache.slide.common.Domain - ERROR - Unable to migrate hub groups to css
    connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@9b2a51
    connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@2431b9
    CMSOfflineServlet Initialized
    2012-03-06 10:50:42,328 [main] ERROR com.hyperion.ces.utils.db.DBRegistryManager.<init>(DBRegistryManager.java:74) - Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,328 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,328 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,343 [main] ERROR com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:51) - com.hyperion.workflow.engine.api.base.WfException: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot getUsers.
    java.lang.NullPointerException
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:780)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
         at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
    2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot signOn.
    com.hyperion.workflow.engine.api.base.WfException: Cannot getUsers.null
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2593)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:782)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
         at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
    2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:39) - Error Getting the workflowEngine Cannot signOn.Cannot getUsers.null
    Mar 6, 2012 10:50:42 AM org.apache.coyote.http11.Http11BaseProtocol start
    INFO: Starting Coyote HTTP/1.1 on http-28080
    Mar 6, 2012 10:50:43 AM org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:28082
    Mar 6, 2012 10:50:43 AM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/125 config=null
    Mar 6, 2012 10:50:43 AM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 108250 ms

  • Export shared service active users (provision for Hyperion)only using MSAD.

    Hi..
    I m using Hyperion 9.x . and using active directory in shared services.
    while i m using importexport utility to export the active users list with provisioning.
    Issue is :
    Hyperion external authentication have all users of Active directory but i need to export only active users which are provisioned for Hyperion projects .
    I dont need the complete users list .
    Also i m unable to export the provisioning of users in exported file.
    Please can you help me in getting the correct export statement for the above.
    Thank you very much

    Thanks John !!
    I am using the following statement for 9.3.0 but not getting provisioning section in exported file.
    Only users/Groups/Roles are there in exported file.
    Please help me to overcome the problem .
    importexport.css=file:/C:/Hyperion/SharedServices/9.3/AppServer/InstalledApps/WebLogic/8.1/css.xml
    importexport.cmshost=HSS machine name
    importexport.cmsport=58080
    importexport.username=User name **User name i m using is Active Directory user with administrative rights in Hyperion**
    importexport.password=password
    importexport.enable.console.traces=true
    importexport.trace.events.file=C:/Hyperion/common/utilities/CSSImportExportUtility/importexport/trace.log
    importexport.errors.log.file=C:/Hyperion/common/utilities/CSSImportExportUtility/importexport/errors.log
    importexport.locale=en
    # export operations
    export.fileformat=csv
    export.file=C:/export.csv
    export.internal.identities=true
    export.MSAD.user.passwords=true
    export.provisioning.all=true
    export.delegated.lists=false
    export.user.filter=*@MSAD
    export.group.filter=*@MSAD
    export.role.filter=@MSAD
    export.producttype=*
    export.provisioning.apps=*
    Thank you very much
    Vivek Jaiswal
    Edited by: user11966901 on May 25, 2010 8:16 PM
    Edited by: user11966901 on May 25, 2010 8:19 PM
    Edited by: user11966901 on May 25, 2010 8:20 PM

  • Hyperion S9 Shared Services Error

    Hi All,
    I have been faced with some problem pertaining to Shared Services 9.3.1
    The OpenLDAP services work perfectly fine, but the Shared Services throws an error " Some services stop automaticaly when there is no work to be done "
    I have done the following till date:
    1) Reconfigure Shared Services
    2) Re-install Shared Services
    3) Create a new user and configure
    4) Restart system
    5) Recover Shared Services
    However despite having tried the above measures, it has failed to respond, and continues to throw the same error.
    Kindly help me resolve the same.
    Regards,
    Apo

    Hi,
    I accept with Sandeep,
    but if u r trying to install for practice .. you can install in Windows XP Prof sp3.
    I installed on my machine and its working....
    I had the same problem in my server Windows 2003 SP4.
    I renamed the folder C:\Hyperion to C:\Hyperion_old and tried to reinstall the Hyperion SS and ES, AAS once again... now its working... in your installation there may be some problems with the register entires....
    1 whole week I fedup with this installation and I thought to rename the current Hyperion home and redo the process with new home....
    I accept completely with Sandeep... but if u r installing in your local machine try once again... if u r getting the same problem them change the OS....

  • Shared Services Database configuration Failed - EPM 11, Linux, Oracle 11g

    Hi, I am trying to install Oracle EPM 11 on linux machine and I obtain a error when I configure Shared Services repository. The error log say:
    com.hyperion.hub.HubDBConfigurator, ERROR, Unable to delete entries in OpenLDAP, failed with result code 1
    com.hyperion.hub.HubDBConfigurator, ERROR, Error: java.lang.Exception: Unable to seed initial entries in OpenLDAP
    com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error: com.hyperion.cis.config.ProcessingException
    org.apache.catalina.core.ApplicationContext, ERROR, StandardWrapper.Throwable java.lang.NullPointerException
    org.apache.catalina.core.StandardContext, ERROR, El Servlet /interop lanzó excepción de load() java.lang.NullPointerException
    I am using Oracle Enterprise Linux 5, Oracle Database 11g, and default application server.
    My machine have Intel dual core processor, 2 gb ram, 50 GB availables on Oracle EPM installation partition.
    I hope that some body can help me!!
    best regards,
    ASolar.

    Hi ASolar,
    Were you able to solve this problem? If so if you could tell us how you solved it we would greatly appreciate it.
    We have had the same issue trying to re-configure the Foundation service on Sun Solaris (SPARC 64bit) with Oracle 10G.
    (Oct 14, 2009, 00:11:03 PM), com.hyperion.hit.registry.Registry, ERROR, Exception when trying to store the component
    java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
    at java.util.ArrayList.RangeCheck(Unknown Source)
    at java.util.ArrayList.get(Unknown Source)
    at com.hyperion.hit.registry.JDBCRegistryUtils.storeComponent(JDBCRegistryUtils.java:612)
    at com.hyperion.hit.registry.JDBCRegistryUtils.saveComponent(JDBCRegistryUtils.java:166)
    at com.hyperion.hit.registry.Registry.storeComponent(Registry.java:2749)
    at com.hyperion.hit.registry.Registry.getInstance(Registry.java:353)
    at com.hyperion.config.wizard.impl.RegistryWizardRule.validate(RegistryWizardRule.java:66)
    at com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel.queryEnter(WizardFormAdapterPanel.java:80)
    at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
    at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(SwingWizardUI.java:842)
    at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
    at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
    (Oct 14, 2009, 00:12:36 PM), com.hyperion.hub.HubDBConfigurator, ERROR, Unable to delete entries in OpenLDAP, failed with result c
    ode 1
    (Oct 14, 2009, 00:12:36 PM), com.hyperion.hub.HubDBConfigurator, ERROR, Error:
    java.lang.Exception: Unable to seed initial entries in OpenLDAP
    at com.hyperion.hub.HubDBConfigurator.refreshOpenLdap(HubDBConfigurator.java:573)
    at com.hyperion.hub.HubDBConfigurator.configure(HubDBConfigurator.java:174)
    at com.hyperion.foundation.config.FoundationDbConfigurator.configure(FoundationDbConfigurator.java:62)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
    at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    Many thanks,
    James

Maybe you are looking for