Hyperion Enterprise Reporting Error

I'm new to Hyperion Enterprise and Hypeion Enterprise Reporting. While exploring the reporting portion of it in Hyperion Enterprise reporting" I unintentionally made some setting change which has resulted in period dimension in POV showing *error*. Rest of the dimensions are displaying properly but this has resulted in reports not displaying anything. Can anyone guide me on how to undo this. Thanks in advance for your help.

Hi Jay,
This is basically due to a Proper Frequency is not set in the POV.
And easy way would be to log in to Enterprise and click on Reports module and open the report and check if you are able to view the data.
If so make a note of the POV and making a note of the POV should be done in the Enterprise Reports module, the reason why is when you open the POV in the Enterprise reports module it would open the POV the similar way it opens in the Hyperion Enterprise reporting.
Make a note and write it down exactly as it is being displayed in the Enterprise > Reports module POV.
Hope this helps,
Thank you,
Charles Babu J

Similar Messages

Does anyone know Hyperion Enterprise Reporting 6.4.1.1? This was installed before i got to my current location. When I try to start it I get an error "repeng32.dll" error.

This was installed before i got to my current location. When I try to start it I get an error "repeng32.dll" error.

Sounds like an issue with the current installation. May need to uninstall/reinstall. Hyperion Enterprise Reporting has a seperate installer than that for just Hyperion Enterprise so it's possible that the reporting component isn't even installed.

Hyperion Enterprise web error

Hi ,
Thanks a lot on helping me in resolving one issue, "Hyperion Enterprise Error: Module not Found He.hecontainer". But when I click on application setup I am getting the following error message.
Server Error in '/HEWeb' Application.
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 793:
Line 794: ' Get the application list
Line 795: vtStatusCode = Application("EntAppObject").EnumApps(vtAppListXML, vtStatusDesc)
Line 796:if vtStatusCode 0 or vtAppListXML = "" then
Line 797: ' To display the localized string for Errorloading application list problem
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.startupadminmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx:795
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint
Thanks,
Rakesh

Hi Rakesh - looks like you opened a new thread. (not sure which one is active so I've posted to both. I'll look for a reply on both. Cheers. -David),
Hyperion Enterprise Reporting 6.5 is NOT supported on MS Windows 2008 server.
Hyperion Enterprise Reporting 6.5.1 is supported.
Could you please verify your version of Hyperion Enterprise Reporting (again)?
Please also verify the other components of your build against your version at the following link:
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
(See Hyperion Enterprise 6.5.1 (XLS) or Hyperion Enterprise 6.5 (XLS) depending on your version)
Also can you confirm you performed the following steps during your installation of Hyperion Enterprise Reporting?:
Applies to:
Hyperion Enterprise Reporting - Version: 6.3.1.0.00 to 6.5.1.0.00 - Release: 6.3 to 6.5
Information in this document applies to any platform.
Purpose:
Configuring Hyperion Enterprise Reporting Web.
Questions and Answers
How to Configure Hyperion Enterprise Reporting Web?
1. Create LOCAL username and password with Administrator rights. This is your impersonation account.
You may use the local administrator as your impersonation account, but it MUST be local, not a domain admin.
2. Users IWAM..., IUSER... SYSTEM, INTERACTIVE, Administrator and Everyone are automatically created users/groups.
In Local Security Settings -> Local Policies -> User Rights Assignment.
Add the add IUSR, IWAM, SYSTEM, INTERACTIVE, Administrator, Impersonation account and Everyone to:
a) Act as part of the Operating System.
b) Log on locally (or Allow log on locally).
c) Log on as a service.
d) Log on as a batch job.
3. In IIS services <server>
Web Sites -> Default Web Site -> Right click on HSpider -> properties
Virtual Directory tab.
Select only Log visits and Index this resource.
Application name: HER.
Execute Permissions: Scripts and Executables .
Application Protection: High.
Directory Security tab.
Deselect all except Basic Authentication .
(Windows 2003) Web Service Extension .
Select All Unknown ISAPI Extensions.
Click the Allow button.
Repeat with all other items starting with HER and Active Server Pages.
4. In Component Services -> Computer ->
a) Right click on My Computer -> Properties.
b) Default security tab (COM security tab).
c) Access Permissions Edit Default button.
d) Add IUSR, IWAM, SYSTEM, INTERACTIVE, Administrator, and Impersonation account.
e) Launch and Activate permissions Edit Default button.
f) Add IUSR, IWAM, SYSTEM, INTERACTIVE, Administrator, and Impersonation account.
5. My Computer -> Com+
a) IIS... HSpider properties -> Identity tab.
b) Browse to impersonation account and add password.
6. My Computer ->DCOM Config (or Start-> Run -> DCOMCNFG).
a) Right click HypPkgrH_Pooler -> Properties -> Identity tab.
b) Browse to impersonation account and add password.
c) Repeat with Spider_Pooler.
7. Internet services must be reset (Start -> Run -> iisreset).
8. In the Hyperion Enterprise Reporting folder of the Start menu, select Web Server administration
Program.
Options button.
Network tab.
Select Allow Hyperion Enterprise Reporting Web Server to access other network devices.
Add the impersonation account and password.
If desired, select the Preload tab and add your application.
System is Enterprise6 as found in the repeng.ini.
If using Distributed Retrieve or Schedules
9. In the Hyperion Enterprise Reporting folder of the Start menu, select Distributed Server Manager
a) Network tab
b) Select Allow client to access other network devices
c) Add the impersonation user and password
If you have any questions about these steps please don't hesitate to drop me a note and I'll do my best to explain what is required.
G'Luck,
-David

Hyperion Enterprise web error message

Hi,
I am using Hyperion Enterprise 6.5 version, When i tried to enable web version of Hyperion enterprise web by browsing http:\\localhost\Heweb from the server
Server Error in '/HEWeb' Application.
Module not found:he.hecontainer
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 338: ' Get the application list
Line 339:
Line 340: vtStatusCode = Application("EntAppObject").EnumAppsForLogon(vtAppListXML, vtStatusDesc)
Line 341:
Line 342: Dim domXML
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\LogonMain.aspx Line: 340
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.logonmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\LogonMain.aspx:340
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240
Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3601

Hi Rakesh,
1.) Please confirm you followed the steps below during your HEWEB initialization process? (The first time you enable HEWEB - the applications added need a long time to cache depending on their complexity.)
*How to Prevent Hyperion Entperise Web Components from Timing out and Dropping from Memory on HEWEB Server [ID 1134663.1]*
Modified 03-AUG-2010 Type HOWTO Status PUBLISHED
Applies to:
Hyperion Enterprise - Version: 6.5.0.0.00 and later [Release: 6.5 and later ]
Information in this document applies to any platform.
Goal:
What steps are required to prevent an application loaded into HEWEB from timing out and dropping from memory thus requiring users to wait for the application to re-load whilst the connect?
Solution:
In order to use Hyperion Enterprise Web (HEWEB) and Hyperion Smartview for Enterprise (HSE) the application you wish to connect to needs to be Enabled for HEWEB on the designated HEWEB server.
To enable an Application for HEWEB the designated HEWEB Server needs to have Microsoft Internet Information Server (MIIS) and ASP.NET installed.
If the HWEB component has never been installed, the Enterprise Installer needs to be run selecting the HEWEB option on the Install component list. Once selected and run the install. This will install the required version of HEWEB and ASP.NET.
If the HEWEB server has been installed, in order to Web Enable the application(s) required follow the steps below:
1.Login to Enterprise as a user with Admin Rights.
2. Enter the Application Module from the Enterprise Desktop.
3. Choose the Navigate menu followed by Server Administration.
4. In the Web Server pane select the Enabled check box.
Set the Web Server URL to read http://YOUR SERVERNAME.
Set the Session Manager, task Server and Web Application Controller to be just the server name.
Set the upload location to be a suitable folder on the server in which to store dataload files.
5. If using Hyperion Enterprise Reporting Web (HERW) as well as HEWEB:
Set the Server name for your HERW server in the Hyperion Enterprise Reporting Web Server.
6. Leave the number of connections set to 12.
7. Once these parameters are all set. Hit Apply.
Depending on your application size and complexity of your metadata, after a delay, three processes will start up and consume memory and CPU. These are HeAppController.EXE, HeDataController.EXE and HeAppMgr.EXE. The time taken is a function of application metadata complexity and NOT the amount of data within the application.
Once the HeAppController.EXE has settles to 0% CPU utilization and the process memory usage has stopped increasing the application has loaded into HEWEB and should be visible in the list of applications when you hit the link http://YOURSERVERNAME/HeWeb/default.asp from a browser.
If the application takes a very long time to load, the amount of time can be reduced with no adverse affect by editing the Applicationname.ini located in the application folder to include the line ENABLECACHEFORSMARTVIEW=”0” towards the end of the file.
After some time these 3 processes, HeAppController.EXE, HeDataController.EXE and HeAppMgr.EXE will drop from memory and if the line WEBAUTOSTART=1 is set in your server Hypent.ini file, these processes will re-load when a user hits the HEWEB server via a browser or makes a Smartview Connection attempt.
Note if the load process for your application takes a long time, the first users to hit the server will have to wait while the processes re-load.
This can cause user confusion and lead users to think the server is down!
To prevent these processes dropping from memory perform the following steps on your HEWEB server:
1. From the Start Run command run INETMGR to bring up Microsoft Internet Information Manager Console.
2. Identify the Default Application Pool in the left hand pane by drilling down into Application Pools.
3. Right Click on the Default Application Pool and select properties.
4. Find the re-cycling TAG and edit the value in Recycle work processes in minutes to a long period i.e. 28800 (20 days).
5. Find the Performance Tag.
6. DESELECT, Shutdown worker processes after being idle for (time in minutes).
7. Exit from the Web pools setting and close down INETMGR.
8. From the start button re-set IIS services by issuing the command IISRESET from the run box.
9. IIS will now re-start and then once initially called the process for HEWEB should not remain in memory for the duration of the period specified.
Note: Be wary of taking back-ups while the webserver connection are held open. It is advised that the internal Enterprise back-ups are used which will not be affected by the HEWEB process remaining active.
2.) In your previous post you mentioned that you followed all of the installation steps required for installing HE 6.5.1. Could you please confirm that this was a new installation? Or was this an upgrade from an older version?
Let me know how you get on.
G'Luck,
-David

Hyperion Enterprise Reporting

My Hyperion Salesperson tells me Hyperion Enterprise Reporting in no longer supported for Essbase, but that conflicts with reports I am getting from Hyperion Support that they are releasing upgrades to go with Essbase 6.2 and 6.5. Does anyone know what the story is on this? I know they are pushing Hyperion Reports, but I'm not sure if they have sold a lot of licenses for this. We don't have the time right now to upgrade all of our Hyperion Enterprise Reporting reports anyway. Crystal Reports seems to be the front-end tool referenced in Hyperion classes. Is anyone using this front-end and how do you like it?

We are using HER 3.7 with Essbase 6.2.1 with no issues

Hyperion Enterprise reports to Financial reports

is there any way to migrate Hyperion Enterprise Reports to Financial reports v9?
Right now i am manually building it and i have a bunch of them to build.?
Any suggestions on easy migrations.?
Lakshmi

Hi Lakshmi,
Unfortunately, I don't think you will have a lot of luck in this one. FR only supports the following database connections: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hs_user/database_manager_fr.html
Cheers,
Mehmet

Hyperion Enterprise Web error when trying to do application setup

Hi David,
Thanks a lot on helping me in resolving one issue, "Hyperion Enterprise Error: Module not Found He.hecontainer". But when I click on application setup I am getting the following error message.
Server Error in '/HEWeb' Application.
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 793:
Line 794: ' Get the application list
Line 795: vtStatusCode = Application("EntAppObject").EnumApps(vtAppListXML, vtStatusDesc)
Line 796:if vtStatusCode 0 or vtAppListXML = "" then
Line 797: ' To display the localized string for Errorloading application list problem
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.startupadminmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx:795
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint
Thanks,
Rakesh

Hello,
I believe you posted your query to the wrong forum. I would suggest you review the classifications for which forum to post the query. This assist other users by following the guidelines:
Financial Consolidation
Covers Hyperion Financial Management, Hyperion Enterprise, and respective administration/development topics
Financial Data Management
Covers Hyperion Financial Data Quality Management, Hyperion Data Relationship Management (formerly Hyperion MDM), and respective administration/development topics
So in essence; please repost your query to Financial Consolidation.
Thank you,

Hyperion Financial Reporting : Error 1001

While connecting from Hyperion Reports 7.0 to an Essbase cube (Ver 7.1.6.6) stored on another server, I am getting an error (Error 1001: Unable to connect to datasource) while running any report. However I am able to create reports using the metadata of the cubes.
The problem occurs only when I try executing any report. :-(
Is there any API issue out here?
Can anyone help me debug this situation?

Very old post, but anyway...
In my case restart of Hyperion Financial Reporting - report server service helped and reports were available again.
L

Hyperion financial reports - error

.

Anuradha123 wrote:
hi,
i ve installed Essbase & financial reports. when i start financial reports im getting the error COULD NOT CONNECT TO GSM SERVER SERVERNAME:6800*..
what is the problem.The problem is a network, program, installation or configuration error.
The first step towards a solution, as Daniel points out, is to ask in a place where you will find people who deal with Hyperion Essbase. An alternate is http://lmgtfy.com/?q=COULD+NOT+CONNECT+TO+GSM+SERVER+SERVERNAME

Convert Hyp Enterprise reports to Hyperion Reports 2.5

Can you convert reports created with Hyperion Enterprise 5.1 to Hyperion Reports 2.5?James 214-285-2221

If you are referring to Hyperion Enterprise Reporting, the answer is no. The reports need to be rebuilt in Hyperion Reports

Hyperion Enterprise 6.5.1.1 performance?

Hi!
Is anyone using Hyperion Enterprise/Hyperion Enterprise Reporting 6.5.1.1? On Windows 2008 64-bit R2 Standard servers?
If yes- have You experienced any performance issues/errors?
Thank You!
Zigmunds
Edited by: 1007063 on May 29, 2013 9:55 AM

Hi,
I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
Hope this helps,
Thank you,
Charles Babu J

Hyperion Enterprise Excel retreival Issue

Hi,
While retrieving data from Hyperion Enterprise using excel add-in I'm getting #Value! in all rows. I have the formula multiple times not able to figure out.
Formula : =CDAVAL("enterprise6:VF"," cat "&B$5&" acc "&$A12&" ent "&B$4&" dat "&B$6&" fre "&B$7)
I have that checked the account(mentioned in a12 cell of excel sheet) in enterprise & it is present. Earlier this sheet was working fine. For rectifying this I uninstalled the applicaion and installed Hyperion Enterpirse as well as Hyperion Enterprise Reporting but still getting the same error.
Pls any body guide me ??

Guys,
I found the solution... Reason was improper POV selection.
Thanks !!

Upgrade to Hyperion Enterprise 6.5.1.1.102 - Performance Issues

We are testing an upgrade to Hyperion Enterprise 6.5.1.1. We have applied the Update 2 patch which I believe officially takes the version to 6.5.1.1.102. In testing reports and consolidation between the new version and the old 6.4.1 version of Enterprise, we are seeing a delay in how long it take reports to generate and for Consolidation to complete. With reports, we see the delay specifically when running large reports that pull a lot of data.
Currently, our 6.4.1 Hyperion application is installed on a Win2003 server and our users access Hyperion via Citrix. The 6.5.1.1.102 version is installed on a Win2008 server and is being accessed through Citrix.
To isolate this issue, we loaded Hyperion locally on a server and the timed some reports. The 6.5 reports take just as long to run as on our current v6.4 platform. So, it appears there is a performance issue running 6.5 enterprise through Citrix. Has any one else experienced this type problem or have any suggestions. We have been referred to numerous performance tuning notes from Hyperion support but nothing seems help.
Thanks.

Hi,
I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
Hope this helps,
Thank you,
Charles Babu J

Upgrade Hyperion Enterprise 6.2 to 6.5

Hi,
We want to upgrade Hyperion Enterprise from version 6.2.1 to version 6.5.1 so I wanted to know if there is any document document and if there are do's and don'ts for the same. Will there be any functionality that will not be working in this case ???
Thanks,
--XAT

Hi,
I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
Hope this helps,
Thank you,
Charles Babu J

Enterprise Reporting 3.9 on Essbase

Has anyone tried to use Enterprise Reporting 3.9 with Essbase? It's asking for a location of the report files in the install. Do I have to export all of my Hyperion Reports 1.7 reports so it can reference them as files? We wanted to use this as an interim solution while we upgrade to Hyperion Reports 2.6.

Hyperion Reports and Hyperion Enterprise Reporting are different products. It sounds like you want to use Hyperion Reports 1.7 reports with Enterprise Reporting 3.9. This will not work.My opinion...the resources to install/configure Enterprise Reporting 3.9 would be better spent on upgrading to Reports 2.6.Are you having an issue with the upgrade?

Hyperion Enterprise Reporting Error

Similar Messages

Maybe you are looking for