Hyperion financial reporting hierarchical structure of the rows

Hi All,
I am using hyperion financial reporting for creating reports.
I have a prompt for account in the row dimension and according to the selection of the
row dimension the tree like structure will come for the member selected.
I am getting the tree stucture but it is like an inverted tree structure.
What should i do to get the correct tree structure?
Thanks

If you are descendants of accounts, it is not possible. However, try IAncestors of level 0 account. I never tried that.
Good luck!
Venu

Similar Messages

  • Hyperion financial  reports issue

    I have problem but with Months and years in Hyperion Financial Reports.
    if i run the reports for JAN 2007 it has to show for previous 12 months
    in my case the year is not changing to 2006 for DEC i'm using Relative member -1 function
    can please let me know how to slove this issue .Ts is very urgent.

    try to do it in 2 columns ( let say you have selected 'Jul' and '2007'
    First column
    2006 - x to Dec
    2007 - Jan to y
    where x = prev month
    y= current month
    there may be problem while selecting Dec 2007 cot in that case you will have to show only 2007 months. i think that you can do based on some conditional suppression
    hope this helps.
    Regards,
    Rahul

  • Comparing strings in IfThen() structure of Hyperion Financial Reporting

    Can we compare current value of a dimension with a string in the IfThen() structure in hyperion financial reporting tool? I have not been able to carry out the same successfully. Also, I need to get value from a partcular cell to use in IfThen() condition but it takes only row number and not a cell (e.g. IfThen([1]=0,1,2) and not IfThen([1,B]=0,1,2)).
    Is there any way in which we can solve these issues?
    Regards
    Edited by: N.S. on Apr 26, 2011 12:25 AM

    Neville,
    Page 48 of this link
    http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
    JTS

  • What HFM Table contains the Hyperion Financial Reporting Modify Date

    Does anyone know the name of the HFM table that contains the Hyperion Financial Reporting Modify Date field of a Report?
    Thanks!
    Edited by: user2609991 on Sep 1, 2009 8:49 AM

    1. no "HFM Table" stores any information about Financial Reporting reports. Financial Reporting is part of the "BI+" / "Reporting and Analysis" product, so if there was any information to be found in a relational database, it would be in the BI+ schema not the HFM one.
    2. Oracle / Hyperion do not support customers trying to build their own relational database integrations directly into product repositories. To interact with the BI+ product (e.g. to extract modified by dates of FR reports) you should read up on the API and write custom code using that API. More information can be found in the Developers Guide here http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_developer.pdf and in the "javadoc" documentation that comes with the BI+ product.

  • How to include look and feel features in the Hyperion Financial Reports

    Hi,
    Can anybody suggest me how I can enhance the look and feel features of Hyperion Financial Reports, any references
    2) Will traffic lighting functionality is present in Hyperion Reports (FR), if not present how can achieve this functionality
    in FR ?
    3) We have user look and feel features like pinboard in the web analyis reports, but are there any certailn features
    in Hyperion Reports ??

    You can use Conditional Formatting to produce stoplights in Report Studio.
    If you know of specific things that you want to see, try reading the manual. I cannot give you details of every type of formatting you may want to see from such a vague post.

  • Create unit cost reports in Hyperion Financial Reporting

    Hi,
    I have some doubts regarding the creation of "per unit" reports in Hyperion Financial Reporting. In the business model we have:
    - different cost and revenue groups (identified by accounts dimension)
    - different business channels (identified by business channel dimension)
    - units different for each business channel (identified by accounts dimension and by currency dimension)
    What would be the most efficient way to easily construct per unit reporting? Reporting should be able to show data as:
    (*in principle, the "$ per unit" column is the most important one. The other columns could be hidden without problem)
    (**the main challenge is to be able to easily reflect per unit values calculated with different units, depending on the business channel and potentially other dimensions)
    More precisely, the questions are:
    1. What should be the dimensions structure? Units in separate dimension? Or inside accounts dimension and differentiate with currency dimension?
    2. The calculation of per unit amounts should be done within the reporting or should it be precalculated value?
    2a. If within reporting - how to technically include this calculations? Show $ and units and then use the formula?
    2b. If precalculated - how to solve the problem that the TOTAL per unit values are not the sum of per unit values for each Business channel separately (as each Business channel has its per unit calculated only with the units of this Business channel)? (please take into account that Business channel may not be the only dimension that changes the units to be used in per unit calculation - we can also have different units for different cost centers etc.)
    3. How to show $ and units separately, as in the example, if, when limiting a row by Revenue, for example, is making the units value for this row 0? How to overcome this?
    Many thanks in advance for your help and best regards,
    Pawel

    I came up with one concept of how to deal with this problem - let me know what you think. The idea is pictured in the image below:
    The answers to the 3 questions using this solution would be:
    1. What should be the dimensions structure? Units in separate dimension? Or inside accounts dimension and differentiate with currency dimension?
    Units would be a separate account in the "accounts" dimension. But also, units could be differentiated by the "currency" dimension.
    2. The calculation of per unit amounts should be done within the reporting or should it be precalculated value?
    2a. If within reporting - how to technically include this calculations? Show $ and units and then use the formula?
    Withing the reporting, as I have no solution to precalculate per unit values using so many different groups of units - if we want to have different per unit per each business channel or cost center etc. I understand we would need that many different precalculated "per unit" values, which would be a lot...
    Regarding 2a, a simple formula would do (box C). However, for rows with auto totals, the formula would need to have priority over the autototals (box D) - how is that done? Is it possible and easy?
    3. How to show $ and units separately, as in the example, if, when limiting a row by Revenue, for example, is making the units value for this row 0? How to overcome this?
    As we can differenciate units using both accounts and currency dimension, with the accounts placed in rows, the elements selected would always include the units (box A). Then, in the columns, using "currency" you would choose whether to show the cost and revenue accounts ($) or units (box B). Like this you would not get 0 in units, neither you would distort $ amounts.
    What is your opinion? Best regards!

  • Hyperion Financial Reporting - #missing Suppression causing report not to generate 11.1.2.2

    Hi,
    We recently went live with an implementation of 11.1.2.2 and have build large report suite in Financial reporting to accompany the release.  Over the weekend we patched up to 11.1.2.2.305.4195 however we have began to notice our FR reports are failing to generate and hang at a white screen for both HTML and PDF views.
    After a little digging it looks that the issue is with any report that has suppress #missing on rows. If I take this suppression off the report will generate successfully.    This is not an acceptable solution for us as many of our reports will run into 100's/1000's of lines.
    Has anyone else experienced this recently and if so, are there any other fixes to be suggested.  I'm assuming this is a bug introduced with 11.1.2.2.305
    For reference we are also running the following versions.
    Reporting and Analysis Framework - 11.1.2.2.000.998
    Oracle® Hyperion Financial Reporting, Fusion Edition - 11.1.2.2.0.0387
    Graham

    Hi, We have but awaiting a response.   Interestingly I've did some testing and suppression does work if I go via the advanced suppression option which although a inconvenient to rework the reports does give a solution.
    Additionally I've noticed a couple of other issues with suppression across the application so looks to be more widespread.
    1) Webforms are no longer suppression #missing both in the application and also when downloaded to Excel.
    2) Intercompany reports no longer suppress when we set tolerance to say 10% etc.
    Each in itself can be worked around but annoying non the less.

  • Overflow error in Hyperion Financial Reports

    Hi All,
    I'm using Hyperion Financial Reporting Studio version 9.3.1. Recently we are facing few issues with FR. When we try to copy a column, we are getting the "overflow" error. Can someone help on how to resolve this issue ?
    FYI. The no. of Rows in the Report are approx. 3000 and columns around 20. Pls. help
    Thanks,
    PVR

    Hi John,
    The no. of rows in the Report are (Design mode) approx. 1700. When we run the report, the total no. of rows showing is around 3000. The no. of columns, rows cause the overflow issue ?
    How we can clear the buffer ? We Restarted the server also, but no luck. The same error appearing
    Thanks,
    PVR

  • Limit member selection based on access in running Hyperion Financial Report

    Hi there
    I am wondering, is it possible to limit the member selection in a prompt box based on what access they have when running a Hyperion Financial Report?
    I know its possible to limit the user POV based on the members they have access to (in Preferences) but we have a reporting requirement on the page dimension to prompt the user for what cost centres they want to run the report for. When I used a prompt function the user gets to select any cost centre in the "choices" range regardless of whether they have access or not. We just want it to show what cost centres they have access to.
    Thanks

    If the datasource is ready only and not writeable for the users, then you can use MetaRead filters for cost centre, which will only show the hierarchies the users have access to.
    (You cannot mix Write and MetaRead filters in the same filter, it would be Write and Read).
    Let me know if that's an option.
    Cheers, Iain

  • Cell Text Annotations of Hyperion Planning on Hyperion Financial Reporting

    Hello,
    There is a business requirement to show Cell text entered as annotation on each cells in data form to be reported using Hyperion Financial Reporting.
    Also there is a case of some of the data types being text. Some of the forms also have supporting details.
    Now I want to check how easy or difficult is it to report from Hyperion Planning V11.1.2 for the above mentioned.
    Are there any noticeable performance issues?
    Is it possible to report the cell text annotations , Supporting details & Datatype 'Text' from data form on Financial Report?
    Thanks in advance,
    XX

    I haven't used the text data type, however I have done quite a bit of reporting on supporting detail. All you have to do is use a Hyperion Planning data source instead of an Essbase data source. (and specify on the report to show supporting detail). In general, Hyperion Planning data sources are slightly slower than Essbase data sources. How much slower depends on a lot of factors, but supporting detail can certainly slow things down.
    One key limitation with reports that display this type of data is that it doesn't "roll up" the hierarchies. Your report has to be at the same level (in all dimensions) where the supporting detail was entered. So you can't pick an upper level Entity and show all of the supporting detail for it's descendants unless your report also includes the descendants. I understand why this limitation exists, but I routinely have clients that would like this functionality. (For Example - Show me all of the supporting details for the entire plan.)

  • Hyperion Financial Reporting: Trial Balance Report

    Hi All,
    I am a beginner in Hyperion Financial Reporting. I am trying to create a report for Trial Balance accounts.
    The report should have the all the accounts in the rows and two columns with DEBIT and CREDIT without any other dimensions in the columns.
    I could not setup this grid because we need to have a dimension in the column. It is fine for me to have Period dimension or something like that. But the point is, I dont know how to retrieve the Debit / Credit in two columns.
    I thought a lot to see if we can do this with sign of the data or the type of the accounts. But could not get an idea.
    Does this require any customization in FR? Is there anyway to achieve this?
                                       Debit     Credit
    Account 1                    1000
    Account 2                                   1000
    Account 3                    1000
    Account 4                                   1000
    Variance                         0               0

    Hi,
    Let me understand your issue here. You have Trial balance report which has 2 column: Debit and Credit. What connection do you have ? Is it Planning, HFM or other sources ? Normally, when you are using dimension, you should have another dimension, apart from Account that consist of Debit and Credit, which you can call during reporting design. The only requirement when you build a standard reporting with FR or Smartview is you need to place 1 dimension in row and 1 dimension in column. If you are using Hyperion, such as Planning and HFM, you should have more than 1 dimension.
    If you don't store any Debit/Credit data, then you won't be able to get that. As far as I know, this Debit/Credit exist in Trial balance report, which is an extraction from GL. When FDM or other ETL tool pushes this data as a base data for HFM, the Debit/Credit data will be translated as plus/minus data in HFM. Say, Cash in TB closing should be in Credit. In HFM, this cash displays in positive value. Otherwise, if Cash in TB closing is in Debit, then in HFM, this should be negative. But this rules will apply differently to other accounts.
    I hope this help.
    Regards,
    Anna

  • Location of Hyperion Financial Reports on Server

    Hello,
    Are the Hyperion Financial Reports available as raw files on the web server somewhere? I'd like to restore one from backup and was hoping they'd be in the \Hyperion directory as .des files. Probably won't be this easy, but any info would be great.
    Thanks.

    For 7.2.5 Reports, they are in a SQL database table (i think something RPTS) and the binary data field has the text of the report. (I actually like this because if you wanted to check what reports made use of a account, entity, etc, you could just do a freetext search on the table.....)
    For 9.3.1 Reports, they are in a crazy file structure, with crazy names, and are compressed. You will find them under the RM service/web application folder. In order to X-REF the names properly, you'll need to look into the BI Plus database a bit. The table of interest is V8_CONTAINER.
    I put together a SQL 2005 script that will generate you a listing of all of the reports in a hierarchy format. This will will also help you tie out the folders / reports in the file structure......
    NOTE : WHERE d.PARENT_FOLDER_UUID = 'REPORTMART'
    ^ This will return a hierarchy of EVERYTHING in the table which will probably include stuff you don't want to look at. Simply change 'REPORTMART' to match a UUID specified in the results and then the query will show you all items at that point instead.
    Hope this helps
    Charles
    USE your DB name here;
    GO
    WITH Reports (PARENT_FOLDER_UUID, CONTAINER_UUID, NAME, DESCRIPTION, Level, Sort, CREATION_DATE, LAST_MODIFIED_DATE)
    AS
    -- Anchor member definition
    SELECT d.PARENT_FOLDER_UUID, d.CONTAINER_UUID, d.NAME, d.DESCRIPTION, 0 as level, cast(NAME as nvarchar(1024)) as sort, d.CREATION_DATE, d.LAST_MODIFIED_DATE
    FROM V8_CONTAINER as d
    WHERE d.PARENT_FOLDER_UUID = 'REPORTMART'
    UNION ALL
    -- Recursive member definition
    SELECT d1.PARENT_FOLDER_UUID, d1.CONTAINER_UUID, d1.NAME, d1.DESCRIPTION,
    Level + 1, cast(Sort + '|' + d1.Name as nvarchar(1024)), d1.CREATION_DATE, d1.LAST_MODIFIED_DATE
    FROM V8_CONTAINER as d1
    INNER JOIN Reports AS r
    ON d1.PARENT_FOLDER_UUID = r.CONTAINER_UUID
    -- Statement that executes the CTE
    SELECT replicate(' ',Level) + NAME, DESCRIPTION, CREATION_DATE, LAST_MODIFIED_DATE, Level, PARENT_FOLDER_UUID, CONTAINER_UUID
    FROM Reports
    order by sort
    GO

  • Not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion Financial reporting 11.1.2 version.

    I am not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion 11.1.2 Financial reporting .
    When I enter the value , it just vanishes. Am I missing something here.?
    I need to set export path for PDF generation in Hyperion financial report for batches.

    Edit FRConfig.cmd and update
    set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1
    update epmsystem1 to the correct epm instance name
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • 5200 : Error in executing  query -- Hyperion Financial Reporting

    Problem in accessing the Hyperion Financial Reports.User is having full access and able to access all the folders except one folder(Legal Folder reports). We are getting 5200: Error Executing the query error. Recently we have upgraded Hyperion to 11.1.1.3 version . Before upgrade user is not facing the problem. After Upgrade user is getting these errors while accessing the reports. we did research and found in "Error 5200: Error Executing Query" When Viewing Financial Reporting (FR) Reports". Is this error is relevant to the Information provided in Metalink and also can you please tell us is there any impact on doing the solution provided in the below. Why is this error is coming is any preferences needs to be changed.Please help us on this.
    Error Description:
    5200: Error executing query
    Servername/ApplicationName/DatabaseName/Error(1007090) Unknown Member name [Current Point of view for years] in Outline Query
    Doc ID 1107142.1:
    Possible Cause 1:
    If members have recently been added, moved, or deleted from the data source, Essbase, HFM, or Planning, the existing User POV records become out of sync.
    The User Point of View record uses indexing to identify the member. If the index changes because of changes in the outline, the User Point of View record no longer points to the correct location in the outline.
    To resolve the issue, you need to run the ManageUserPOV utility on a Windows server that has the Financial Reporting Reports Server, or in a Unix or Linux environment, has the Financial Reporting Print Server installed.
    You will need to provide a BIPlus Global Administrator user ID and password to run the utility.
    The utility will provide the correct syntax to run the command.
    1. In \Hyperion\products\biplus\bin\ManageUserPOV.properties, specify the following parameters:
    a. ReportServer
    b. DatasourceUser
    c. DatasourcePassword
    d. User
    e. Datasource (You can find the datasource in Workspace under Tools>Database Connection Manager in the Name column.)
    2. From the command line, cd to Hyerion\products\biplus\bin
    3. Type in "ManageUserPOV" without the quotes. The executable will read the parameters previously set in the ManageUserPOV.properties file.
    Thanks,
    Naresh.

    Take a look at this: http://adistrategies.com/index.php?loc=knowledge1&item=291
    Hope it helps.
    Mehmet

  • Thread: In Hyperion Financial Reporting can we show comments entered in dat

    Hi,
    I want to show comments in Hyperion financial reports. The data form are against BSO cube and when users enter comments in it they want to see in reports which are against ASO.
    Also, if you can help me if it is possible against same cube?

    Hi,
    I think we can't show it in ASO, but if we have a BSO cube then we have to connect our reports with the Planning data source instead of an Essbase data source and specify on the report to show supporting detail.
    You have to do some settings in the FR_Global.properties which are:
    AllowCellTextAsAnnotation=true, the Cell Text check box on the Report Property sheet is shown (for Financial Management and Planning, not Essbase yet). The default setting will be unchecked (turned off).
    AllowPlanningUnitAnnotationsAsAnnotations=true, the Planning Unit Annotations check box on the Report Property sheet is shown for Planning. The default setting will be unchecked (turned off).
    AllowDocAttachmentsAsAnnotations=true, the Document Attachments check box on the Report Property Sheet is shown for Financial Management. The default setting will be unchecked (turned off).
    Hope this helps.
    Regards
    SST.....

Maybe you are looking for