Hyperion Smart View for MS Office doc.

I am using Hyperion System 9 IR on PC version and connected to a Oracle DB 10g. How can I create the shared service for the Samrt View in this case ?

It's actually because you are installing over an old version. Uninstall SV, review the registry entries and directories and then reinstall with admin priv.
Of course when I looked it up on support the Oracle ID 1466433.1 suggests that the .net install is corrupt so was i going mad? Not beyond reasonable doubt since I put in an SR a while back about it so I have proof that it is listed as an " "internal bug #14149839 : "SMART VIEW EXTENSION ACTIVATOR OBJECT (-2147467262) This is reported for excel 2010" has been raised with development team. As per the update from the bug this issue has been addressed in patch 11.1.2.2.310 which is yet to be released."
So if you are on an earlier version of Office possibly is because of the .net install (which I think needs v3.5, at least for Office2003), but I would try do a clean install first.
Steve

Similar Messages

Language Setting for - Hyperion Smart View for Office

Hi,
Here's a scenario I need to find an answer to.
1. We have Essbase system 9 installed on a machine named: USESSSRVR and here the ESSLANG environment variable is set to "English_UnitedStates.US-ASCII@Binary".
2. We build two Unicode cubes, one for Korea Sales called APPKR.SALESCUB & other for Turkey Sales called APPTR.SALESCUB
3. Korean users are sitting in Korea & Turkey users are in Turkey & both these users need to see data in their local languages.
4. Since Essbase Excel Add-In is not compatible with Unicode cubes, we have asked them to use "Hyperion Smart View for Office".
Now question is,
-> Where in this entire system do I need to do Language Settings so that they see their characters correctly?
-> Is there a place in Smart View where you can set languages?
-> Also we have a limitation that we need to have both the applications APPKR & APPTR on the same Essbase server which is in US.
PLEASE HELP.
Thanks.
~Jaymin Darbari.

It's actually because you are installing over an old version. Uninstall SV, review the registry entries and directories and then reinstall with admin priv.
Of course when I looked it up on support the Oracle ID 1466433.1 suggests that the .net install is corrupt so was i going mad? Not beyond reasonable doubt since I put in an SR a while back about it so I have proof that it is listed as an " "internal bug #14149839 : "SMART VIEW EXTENSION ACTIVATOR OBJECT (-2147467262) This is reported for excel 2010" has been raised with development team. As per the update from the bug this issue has been addressed in patch 11.1.2.2.310 which is yet to be released."
So if you are on an earlier version of Office possibly is because of the .net install (which I think needs v3.5, at least for Office2003), but I would try do a clean install first.
Steve

Hyperion Smart View

We are working on the BI Strategy for our Planning and Allocations. The business users download templates online or offline in excel, and upload bulk data, for e.g, mulitple records for a set of fixed columns. Can Smart view handle this kind of upload? I know Hyperion Smart view allows for offline planning with hyperion Planning and allows sync back to server. But I am not sure if it allows bulk upload. any useful response is much appreciated. Thanks..

When you say bulk upload do you mean you have say 20 tabs in Excel and wish to send all 20 -- assuming this is what you mean you will need to employ some VB scripting.
You could use either the Analytic Services (Essbase) Excel Add-in or SmartView for your uploads. SmartView is probably the better long term solution.
I would suggest using Smartview against Provider Services/Analytic Services - Creation of template or allowing user to create their own templates using SmartView against Essbase
Regards,
-John

Smart form for physical inventory doc

Dear Experts,
Is there any standard smart form for physical inventory doc? In SAP, the standard sapscript is INVENT, but this form is in sapscript, can I develop using smart forms? how to link the smart form to the print program?

The transaction MI21 prints inventory using a SAPscript through INVENT.

Smart View for Essbase Not Available in Planning Rapid Deployment

I have successfully deployed EPM 11.1.2.3 by following the steps in the Planning Rapid Deployment guide (http://docs.oracle.com/cd/E40248_01/epm.1112/epm_planning_rapid_deploy/epm_planning_rapid_deploy.html). However, when I bring up Smart View using a Shared Connections URL of http://<servername>:9000/workspace/SmartViewProviders, I only get connections for Planning and for the Reporting and Analysis Framework. How can a I get a connection for Essbase?

As it turns out, the 11.1.2.3 Planning Rapid Deployment wizard doesn't install Essbase Provider Services, just Planning Provider Services and Reporting and Analysis Provider Services. Until I installed Essbase Provider Services, I wasn't even able to create a private connection to Essbase. I had to run InstallTool.cmd and select "Provider Services Web Application" from the Essbase section of the selection screen. I also had to run the configuration utility and select "Deploy to Application Server" under "Provider Services" in the Essbase section of the selection screen.
After that, I was able to create a private connection to Essbase with this URL: http://<server name>:9000/aps/APS
Although the private connection was now working, the Essbase connection was still not showing up as a shared connection in Excel, when I set the Excel Smart View option for Shared Connections URL to http://<server name>:9000/workspace/SmartViewProviders. I was able to get this working by running the configuration utility again and selecting "Configure Web Server" in the "Hyperion Foundation" section of the selection screen.
I was also able to create an XML file as Celvin suggested, using http://<server name>:9000/aps/APS for the Essbase connection. Thanks for the suggestion!
-Tom

Hyperion Smart View Refresh gives Error

Hi
I have installed Smart View version 11.1.2 in my Client's computer having 64 bit Operating System.
Whenever he opens the excel file and click first refresh all the cells having HsGetValue formula shows "Error"
It gives the same Error in every cell even after disconnecting and connecting again.
Please help.

So 11.1.1.3 smart view is not compatible for 11.1.1.3 HFM version for 64 bit OS.
This is not a true statement, please review documentation using the following link:
http://download.oracle.com/docs/cd/E12825_01/nav/portal_5.htm
Anyhow, if the "connection panel is blank", is because after installation you must recreate the connection by selecting a url connection using the following sintax:
http://yourservername/hfmofficeprovider/hfmofficeprovider.aspx , the selecting the appropriate HFM Cluster and database, plus user id and password to create the new connection.

Value put in the maintenace view for field of DOC type gets divided by 100

Hi all,
We have a product table ZPROD_T which contains one quantity column (QUANT) of the data type DOC. We have also created a view and a maintenance view for this table.
The problem is that when we add new values to the table using the maintenance view, the value that we add to the QUANT field gets devided by houndred. E.g. if we put in 4 in the QUANT field (type DOC), the value that we later see in the table is 0,04!
How do we go about to solve this problem and get the correct value in the table? Should we change the maintenance view somehow or change the data type in the QUANT field from DOC to something else?
All help is greatly appriciated!
BR,
Armin

Yes, that would be an option, but I was kinda hoping there was another way to solve this problem. Namely, when we would like to have ability to have decimal values in that field, e.g. if we have quantity in sqr meters or meters. Also if we change data type to QUAN than we need to put values in the "Currency/Quantity fields" in the table ZPROD_T, and at the time we are not sure about what unit of measure we are gonna have!
Is it possible to keep DOC data type and still get the correct values in the table?
/Armin

Hyperion Smart View error

Hi
When i connect to essbase cube through smart view,when i click on refresh, i am getting an error says "Internal error occured".
please suggest what could be the issue,
for smartview query designer to work, do i have to install essbase client also?
Thanks,

Hi,
You don't need to install the essbase client to use Query Designer in Smart View.
I don't think you've supplied enough information for us to offer suggestions on the error. https://forums.oracle.com/forums/ann.jspa?annID=1184
Regards,
Robb Salzmann

Hyperion Smart View Fusion Failed to create Smart View Extension Activator

Receving error with Office 2007, SP2 XP with SP3.
We have done a few installs and there seems to be a problem here and there which i was able to resolve but not this one?
exact error is upon launch of Excel , word 2007.
Failed to create Smart View Extension Activator object. Verify that it is registered properly (-2147221164).
Please help or suggest a solution:
Thank you.

Each time when I start Excel, msg box appear "Error, Failed to create Smart View Extension Activator object. Verify that it is registered properly.
Please install the following update from Microsoft Corp.
"MS Office 2003 update (office2003-KB907417-FullFile-ENU.exe)"
After installing this suggested update Smart-view causes Excel crash every time it is opened.
Smart View version 11.1.2.1.102
MS Office 2003 SP3, Internet Explorer 7
NOTE : Smatview functionality is working fine, but this error message is extremely annoying the users.
We have already installed .NET 4.0 but the issue still exists.

Hyperion Smart View meta read problem

hi
I created a template for users in smart view.I was testing with some native users.
the template which i created was with all the dimension and I Descendants dimensions.
some users are having write back functionality.
i used Meta Read filters for some users who will be only having access to a particular dimension and member.
At first i created a template with all the dimension and descendants and did save the report and I logged in with native users in to the same template.When i click on member selection I am able to see the applied filter( Meta Read) is working properly.But by default when i login with the same user at first i am getting an message saying that for some members you are are not having permission upto there i am fine.
My question is
Is there a better work around.So that when the user logs in smart view the template which provided he should only see the members for which he is having permission and the rest of members for which he is not having permission should disappear.
Thank in Advance
Thanks
Kris
Edited by: user9363364 on Mar 30, 2010 1:08 PM

You most likely have a SV template set up and are trying to share that template, correct? The functions are looking for the SV xla in the bin folder, so if SV is installed in different paths, then your SV template will produce that error. When you first open the template and you get the update links, select edit, then browse to where the user has SV installed and go to the bin folder. This should update those functions.

Smart view for obiee 11.1.16

hi
do we need any license to use the smart view in the company

Hi Srini
I did download the bi office on client machine but I am unable find the below path in my server
D:\FUSSION\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\_WL_user\bioffice_11.1.1\hsq62b\war\WEB-INF.
do we need to install it on server too to update the bioffice.xml
Thanks
Edited by: 990266 on Apr 25, 2013 1:12 PM
Edited by: 990266 on Apr 26, 2013 9:52 AM

Configuration file for smart view for Hyperion planning

Hi,
We are using SmartView for accessing HyperionPlanning application. Please let me know how can we change the provider to use shared services and enable planning it for logging to file. Also which properties file is used for these configurations and where can we locate the configuration file on Hyperion planning installation system.
Please suggest.
Thanks
Edited by: user11189447 on Aug 12, 2010 8:17 AM

Hi,
Checkout the below metalink from Oracle.
Hyperion Strategic Finance Will Not Connect Via SmartView (Doc ID 1561484.1)
Below Solution as per doc ---
1. Run the installation for the HSF Web Application component on the Foundation server where weblogic is for HSF Server.
(Be sure the HSF Web Application component is also installed on the the HSF Server, if separate from the Foundation server as well.)
2. Clean up any failed deployments in the WebLogic Console by deleting the HSFWeb Server from WL Admn
3. Configure the new component on Foundation (target server).
4. On OHS server run configtool and perform the WebServer config task to configure OHS for HSFweb
5. Restart OHS and start HSFWeb
Thanks,
~KKT~

Issue with Smart View for Planning Connection

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names

Well, the thing I always forget and have pulled much hair out over is to add the essbase server access to the planning group.
Check on that, and I will loosen the rocks in my head to see what else I can suggest.
Robb

Hyperion Smart View - Suppress zero & #missing

Hi,
I just noticed today that Suppress zero & #missing rows doesn't work in hyperion smartview when planning forms are opened in it.
Is it necessary to check the suppress #missing rows in Hyperion planning while building the forms ?
Is it not possible that I have all the rows in Hyperion planning form and suppress #missing and zero rows in smartview form whenevr I like to?
Thanks in advance!!

Hi,
You will probably have to set the suppressions on the forms design side, suppress on the smartview side is more for adhoc analysis.
Cheers
John
http://john-goodwin.blogspot.com/

How to use substitution variables in Microsoft Word using Hyperion Smart view

Can we use Substitution Variables in copy data points and refresh in Microsoft Word? I tried it and it does not work dynamically (copy data points only copies what was in excel cell at that point). It only copies the static value of that variable from that cell. I want to use it dynamically in Word so that if I change the value of that variable in Essbase, it is updated in Word upon refresh. Any idea??
We need this feature for reporting in microsoft word and keep using the data points every year (instead of copying the cells from excel over again)
Any help/suggestion is appreciated.
Thanks

you can't use substitution variables with copy data points. I had tried a while ago (post 111.1.2.1.102) and it wouldn't work. I checked with Oracle development and they said it I not available

Hyperion Smart View for MS Office doc.

Similar Messages

Maybe you are looking for