Hyperlink Symbol in pictures with Hyperlink activated

When I enable a picture as a hyperlink on the bottom right hand corner of the picture the little blue curved arrow "hyperlink symbol" appears. This only happens for some of the pictures I have enabled as hyperlinks and it doesn't matter if it is for an external page or one of my pages. Does anyone know how to get rid of this symbol?? All I want is my picture without the hyperlink symbol. Any advice would be great. Thanks!!

All I want is my picture without the hyperlink symbol
It's a visible indicator in iWeb. Publish your page and it's gone.

Similar Messages

Problem selecting and dragging or moving an object with hyperlink activated

Hei!
It is impossible to select or move normally an object, for instance a photo, which contains an activated link, and that's very annoying.
First: Let's say I have that object on the top of the page and I want to put it lower, or maybe cut it and paste it somewhere else. First I need to select it, but as soon as the mouse is on top of it, the mouse over activates and opens a webpage to the designated link.
Second: before I do anything with it, I need to select the object and the only way to do it is by drawing a selection rectangle, which gives me the problem of needing to avoid surrounding objects which I don't want to select. If I don't have space enough, I have to let them get selected together with the desired object, and then unselect using the command key + mouse click.
Third: if I want to move it, i can only do it with the arrow keys, because if I use the mouse, I get back to first problem. So it's that, or disabling the hyperlink, move the object normally, and putting the hyperlink on again. None of it very practical.
If I actually want to cut the object and paste it in another page of the site, after I went through first and second problem, I can cut normally the object, got to the desired page and paste it there. If once there I still need to move the object to place it where I want, I end up in third problem anyways.
Is there any way to avoid this trouble?
Thanks

Thanks Mark, but you answered what I already included within my question. I wrote "So it's that, or disabling the hyperlink, move the object normally, and putting the hyperlink on again"
With that, to "Uncheck the "Make hyperlinks active" you need to first select the object, and you end up back to the first and second problem I wrote.

Drag a picture with hyperlink to open it in a new tab

When I drag a picture with a hyperlink to open it in a new tab, always it asks me to save the picture. I think it is good to do so when I want a screen shot, but I have got an another app that could do screen shots with ease. So, would someone help me out?
I don't want to save it, simply open it in a new tab. Thanks all.

Anyone help?

How do I send an email with hyperlinks active upon receipt?

How do I send an email with hyperlinks active upon receipt? Currently the hyperlinks are only active once I open the attachment. I want them to arrive active just like they do in the emails I receive from Office Depot et al.

mlaughbaum wrote:
BTW, it is "showing". It's just that the links aren't active.
Sometimes you need to look at it from the perspective of a recepient. Save the message before sending and close it. It will be in your Drafts Folder. Click once on it in the Drafts list so you can view is as the recepient would. (Don't open for edit) The links should be active.
Jerry

Make Hyperlinks Active works on URL, not on PDF files

When I'm working on my site and click "make hyperlinks active" to test them, the link associated with a web page at another site on the Internet works, but the hyperlinks associated with pdf files I've selected on my computer don't work. I click and nothing happens.
When I check the files on the computer and just click on the they open fine. They won't work from iWeb, however, when I check make hyperlinks active.
When I uploaded the site, and tried to download the pdf files by clicking on the links on my site, some worked and some didn't. Some opened rather quickly, some took forever.
ANY AND ALL HELP IS APPRECIATED.
Rex

The link to a file doesn't work in the iWeb application
Publish your site to a folder on the desktop, launch it in your browser by double clicking the index.html file and click on your PDF link to see if it directs you to its location on your hard drive.
If it doesn't, you have not set it up correctly in iWeb.
If you are uploading to a server other than .Mac, open an appropriate page folder on your server using your FTP application to see if the PDF or Zip file is actually there.

Hello, on an ipad 4 when watching a live video stream , came up with a blank picture with the quick time symbol in the middle, the sound worked perfectly but no picture ? any suggestions please ?

hello, on an ipad 4, when watching a live video stream , came up with a blank picture with the quick time symbol in the middle, the sound worked perfectly but no picture ? any suggestions please ?

We have a solution that allows you to do most of what you want, including bulding the form, having people fill it out either in Reader (as an XFA-PDF) or on the iPad (as an HTML form).
You design the form once, and it will by styled correctly on the appropriate platform.
For more information, check out these links:
http://www.avoka.com/blog/2012/02/style/
http://www.avoka.com/content/avoka/en/products/sff3/smartform-composer/features_and_demos. html
http://www.avoka.com/content/avoka/en/products/sff3/avoka-smartform-factory.html

There was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

TS1741 Updated Apple TV software, now getting picture with a USB and iTunes

I updated my Apple TV software and now I am getting a picture with back of the Apple TV and a USB wire going towards the iTunes symbol. What do I do?

it's trying to tell you to connect it using a microUSB cable to a computer and use itunes on the computer to restore the firmware

I recently got an iPhone 4 out of nowhere it has decided to go to connect to iTunes screen/emergency calls only when I plug into iTunes it states we are unable to continue with your activation at this time please try again later, or contact customer care

I have recently got an iPhone 4 out of no where it has decided to think that my headphones are in and they are not but does work with headphones in.
Then later on within the same day it after turning my phone on and putting it on charge it comes to the screen stating to connect to iTunes/emergency calls only/no service so I connect it iTunes and it says we are unavailable to continue with your activation at this time. Please try again later, or contact customer care.
HELP!

the same problem but i used it already for 3 years my iphone 4, when i update to ios 6.1.3 version, now is failure like said.
we are unable to continue with your activation at this time please try again later, or contact customer care
any help please. i am here in saudi arabia city of jeddah.
thank you very much in advance
pabs

My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
In other words, your computer can't talk to your operating system so you can't access your data.
Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
First: Shut down your computer completely
Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
Hope this helps, it's annoying but it's your safest bet.
All the best.

Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

I'm assuming you have Photo Stream set up of both devices. However, it seems many users are experiencing the same as you - my take is that streaming photos is not foolproof yet.

HT4993 When i take a picture with my iphone 4s, with flash on the phone dies. Has anyone else experienced this? Does apple support this?

When I take a picture with iphone 4s the phone dies. I hold power button to power up. Thanks for any Help.

Apple Warranty should cover this hardware problem. You could try a Restore of the iPhone Firmware with iTunes on computer to confirm it is not software problem. Then make Genius reservation and take to Apple for resolution.

I live in the US, but am traveling in Mexico. If I take a picture with my iPhone, can I transfer it to my ipad without paying a roaming charge or something?

I live in the US, but am vacationing in Mexico. Is it possible to take pictures with my iPhone, and download them to my iPad without paying roaming charges or some other fee?

Phil0124 wrote:
The only way you are going to get roaming charges is if you use your the celluler network in Mexico.
And believe me, the roaming charges are truly frightening!
But in those spots where 4G/LTE works ok, speed is outstanding. So they can stick you with a HUGE roaming charge in a jiffy.....

Why is it when i take a picture with my new iphone 5S, the pictures aren't saved to my photos?

why is it when I take pictures with my new iphone 5S, the pictures aren't saving to my photos? The only pictures showing up in my photos are the ones from when I first restored my phone from icloud.

Hi AmishCake.
I tried that and it didn't work.

Hyperlink Symbol in pictures with Hyperlink activated

Similar Messages

Maybe you are looking for