Hyperlinks to locations on same page

I'm creating an alumni website and want to put a list of alums at the top of a page followed on the same page by a photo and current bio of each alum (about 130 alums total, length of bio varies from short to lengthy). I want to link the name in the alum list to the appropriate bio so you don't have to scroll down the page to find it.
1. I can't find a way to create this type of hyperlink using iWeb. Can I do it? If not, do I need to create a separate page for each bio and then link to the new page? Are there any other options?
2. If it's possible to link to a specific position on the same page, will that many bios fit on one page? If I can't link to the same page, can I have an iWeb website with that many pages?
Powerbook G4 Mac OS X (10.4.8) iWeb 1.1.2

1. I can't find a way to create this type of
hyperlink using iWeb. Can I do it? If not, do I need
to create a separate page for each bio and then link
to the new page? Are there any other options?
What you are asking for is referred to as "anchors" in HTML-speak...and no, it is not possible to do this within iWeb. But I think varkgirl has posted a post-publishing method of jury-rigging this functionality into the HTML...
http://web.mac.com/varkgirl/iWeb/Anchors
2. If it's possible to link to a specific position on
the same page, will that many bios fit on one page?
If I can't link to the same page, can I have an iWeb
website with that many pages?
I'm not sure about the hard limit on page lengths in iWeb. You'll have to try it and let us know!
But sure, you could have 130 pages in iWeb. I have heard of people with many, many more pages than that.

Similar Messages

How to drag a song on same page in music to another location on same page

I used to drag a song to up or down to another location but now I cannot do so .....It will not work ! How do I get it to work again?

Hi,
The easiest way to do this would be to open a new document, making it the size you want the finished product. Drag each photo onto the new document (having done any editing to the photos before doing so), sizing them as needed.
Hope this is what you have in mind.
Thanks
andaleeb

Hyperlinks directed to different section of same page?

Is this possible in iWeb? What I want is to have a menu bar at the top of one of my pages that links to different sections of the same page since its a really long page. Any help would be greatly appreciated!

There is a way using HTML snippets. See Peter Berglund's post in this thread: http://discussions.apple.com/message.jspa?messageID=9044022#9044022 and then go to his blog for more info.
I've used it in the Contents page for my demo sites. The links in green are to "anchors" on the pages indicated.
The hyperlink would be http://web.me.com/MMeAccount_Name/Site_Name/PageName#widgetX with X being the number of the widget just above the area you want to direct to. You'll have to publish the page and the change the X until you get the location you want (particularly if you have more than one widget on a page). The widgets are numbered in the order they were created.
OT

How do i send hyperlink to a text box within the same page

how do i send hyperlink to a text box within the same page on iweb

It's called an anchor. It's often discussed in this forum.
2 days ago : anchor
Here's a search of the past year : anchors

Hyperlink to a location within a page

Hi,
I'm trying to create a way to hyperlink to an image WITHIN a long page. Is there any way to make a link that "jumps" to a given location within a page, instead of to the top of the page?
I'm using iWeb Version 1.1.1
Thanks

http://www.varkgirl.com/Anchors

Hyperlink - The physical location in the page

When I export the A PDF file, how do I know the physical location of the hyperlink in the output page (coordinates)
I need to export from Indesign
- Hyperlink physical location (# page & XY coordinates)
TIA

I guess I'm misunderstanding the question, then.
I don't quite understand what you're trying to accomplish with this task. How does Excel factor into this? What value is it to have a report of x and y coordinates for an Acrobat page? This sounds like something you'd need for html coding, not a print document. If so, the pages should be exported as html pages, not Acrobat pdf files, from your original. I only ask because I have a feeling you might be creating way more work or expense for yourself than you need to be. The more information you can provide, the better advice you'll probably get.
If you need a report of x and y coordinates, I'm thinking Acrobat is the wrong application. It's not really a web design app. I don't have Dreamweaver here at my office, but I seem to remember that all that information is available if you open your pages in Dreamweaver, and there may be a way of extracting a report with just what you need. You might try asking your question on the Dreamweaver forum, if that's the route that makes more sense for what you're trying to do.

If I am viewing a page with the words date or match, the words are hyperlinks to a dating website. This is not so if I view the same pages in IE and has not been picked up by Norton, Spybot or malware bytes etc. Is this a Firefox bug?

If I am viewing a page with the words date or match, the words are hyperlinks to a dating website. This is not so if I view the same pages in IE and has not been picked up by Norton, Spybot or malware bytes etc. Is this a Firefox bug?

You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Generation of Iview via Hyperlink on same page

I have a field in an iview as a hyperlink and I want the corresponding details Iview to be displayed on the same page when hyperlink is clicked.
Please guide me How can I go about it......:)

Hi neha
You could use Java script code in your java file to open the link in the same window.
saurav

Wix Hyperlinks Won't Open in 'Same Page' - iWeb 09

I recently built a flash intro for my personal website (www.justinmiller.info) using Wix. It's basically some photos of me that you can hover over; the photo expands and you can click on it to be directed to one of the pages on my site.
I have embedded the code in iWeb, published the site, and the rollover effects work fine. The issue is that when I set the "go to URL" of each picture (in Wix) to open up in the same window, the links do not work. I've tried with both Safari and Firefox. If I set the links to open in NEW windows they will work, but this is hardly convenient for someone browsing my website. This one has me stumped.
My question, therefore, is why won't the links from my Wix widget open in the same window. Does anyone have any advice / tips on how I can make this work?
I should also mention that when I test my widget in Wix' "preview" pane, my links work as they are supposed to (either in same page or new page, as I have them set). It's only when I embed my widget in iWeb that they cease to open in the same page.
Cheers,
Justin

Hi Guys. Thanks so much for replying.
Cedric - I'm in 08. I posted in the 06 forum first by mistake. And I basically don't know "how" I built the site. I just kind of poked around like I usually do, trial by many errors.
Roddy - I've had the folder and index on my desktop. I hadn't previously uploaded the index and just did so but nothing's changed. My host company doesn't have an actual control panel. I have a feeling it's not a great one. At least for a beginner. Is there anything on their site I should be looking for?
Cyclo - I hadn't nothiced the Hear button working correctly, since I haven't actually been working there yet! You're right it works. I guess I do have to rebuild the text buttons as you say. I guess this is the down fall of not knowing HTML.
I really appreciate all the input folks.
Dave

Links to other locations on same web page not working in FF6

On my 32 bit Windows 7 machine with 4 GB of RAM, all links worked with FF up through version 5 and links to other pages and/or sites still work in FF6 but not those to the same page (bookmarks). Load the same page in ie8 or ie9 and those links work perfectly.

Safe Mode had no effect. However, I added a link on the page to another site in order to see if it was only the "bookmark" (same page) link that wasn't working. As it turns out, neither type of link works in FF6 but they do work in ie9.
So I tested another site built by me and the links work perfectly.
I also tested both pages on another computer using both browsers and got the exact same results.
It is obvious that something about the pages on the new site are in conflict with FF6 but not with ie9 but, I can find no differences in the way the page is set up (including the DOCTYPE) or in the way the links are built.
Any suggestions about where to look would be most appreciated.
Thank you.

Can not locate driver download page.

Can not locate driver download page.
Officejet Pro 8500 A909a
MS Vista Ultimate 64 Bit.
When using my Linux PC to try and locate drivers for another PC, the website just keeps sending me in circles and never displays the drivers to download. Seems like in the past this has been a problem too. This occures with latest version of Firefox-37.0.1 and the current version of Chromium-37.0.2062.120 Built on Debian 7.6, running on Debian 7.8 (281580) (64-bit).
Navigate to hp.com
Select: Support | Download Drivers
Under 'Drivers and Downloads' tab
- enter product id: officejet pro 8500 A909a
- Select 'Go'
Expand the '+' that lists one link and select it.
None of the following links give a driver download!
- Troubleshooting
- How To
- Product Info.
- Users Guide
- Video Tutorials
- More Options
Maybe one of the options should be 'Driver Downloads'.
Just my $.02.
This question was solved.
View Solution.

Hi,
Many links in there. Please use the following direct driver (for Windows all):
http://ftp.hp.com/pub/softlib/software12/COL31041/mp-110033-2/OJ_AIO_P8500_A909_Full_Win_WW_140_408-...
(Note: Many printers for the whole 8500 series use same drivers).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

SpryValidation and DependentDropdown in the same page

hi,
With "SpryValidation" and "DependentDropdown" in the same page
SpryValidation, on "Submit" event, doesn't work
Any solution??
Thanks
Gabriele

Hi Gabriele,
when checking some code located in some file in the "includes" folder, it seems that the onsubmit event is already "captured" by ADDT´s own clientside form validation routines.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

How can I ensure newer versions of the same page are opened every time I visit

I am advised by my Uni IT screen to ensure that firefox is set to check for 'newer versions of the same page with every visit to the page'. This is to ensure proper functioning inside the University's internal tutorial program.

# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.cache.check_doc_frequency''', double-click on it and change its value to '''1'''
http://kb.mozillazine.org/Browser.cache.check_doc_frequency

Multiple quicktimes on same page, same place

Hopes this makes sense but what I would like is a blank white page with multiple "text menus (hyperlinks)" on the left side of the page that when selected will activate appropriate quicktimes that will then open on the same page, but on the right side.
However, I don't want to see the quicktimes or a quicktime window until it is selected. Then, after the quicktime has played it should disappear and then if another option is chosen from the menu on the left, another quicktime will pop up in exactly the same place. I need this to happen at least 5 times per page.
I'm trying to figure out how to do this without creating a whole new identical page that would be activated and then have to load. All I want to load for each link is the QT's that would appear on that same page, in exactly the same place on the right.
Sorry this is a bit of a mouthful...
imac G5 Mac OS X (10.4.7)
imac G5 Mac OS X (10.4.7)

If there's to be any QuickTime on the page, the QuickTime plugin is going to load, so there's going to be that Q at some point or another. If that's ok, then look at the examples and follow the link to the tutorial on this page.
http://web.mac.com/btkirman/iWeb/Stuff/Welcome.html

PASSING DATA FROM FORM TO REPORT (how to on the same page?)

Hello everybody
yes, i know it is built in a two pages design where the first holds the form and the second the report, but I want it both on the same page so that one can see what he has on the report while adds his own row to the table. Well I could do creating a form and then editing the page and then add another region. Alright. But then i dont know how to relate them together so that the data pass from the form to the report.
Besides, the Form for filling the data needs to pass them to two separate tables, because one table contains the particulars of the location and the other the comments about each store. Easy to do that on PHP and mysql but here I am lost.
Second thing that is driving me nuts is that I created a table named location so as to street postcode for a store, and another one for evaluation so that customers or workers add a a row evaluating services etc.
Well, I am trying to create that form i first talked about that would hold all the fields and I am doing it out of a SQL query that picks the definitions from both tables. My XE is completely empty from any leftovers of other applications etc. I make the equijoin alright
select l.loc_id, l.company, l.postcode, l.street,l.town, e.eval_id, e.loc_id, e.locum_reg, e.date_booked, e.items, e.addicts, e.number_staff, e.attitude_staff, e.organisation, e.stock_filing, e.agency
from location l, evaluation e
where l.loc_id = e.loc_id
and i get this annoying error all the time
ORA-20001: Unable to create form on equijoin. ORA-20001: Error page=2 item="P2_LOC_ID" id="1324114494879878" ORA-20001: Error page=2 item="P2_LOC_ID" id="1324114494879878" has same name as existing application-level item. ORA-0000: normal, successful completion
well, if that form is made up of both tables, it will definitively have to have something in common with them! how is the item name suppose to have another name? it is made with the wizzard so supposedly the wizzard should know it but I have tried for two days 14 hours each day.
any indication as to how solve this would be priceless for me
thank you
Alvaro
=========================================================================================================
Edited by: user12155340 on 14-Nov-2009 03:38

I'm just guessing, but it appears since you are selecting loc_id twice (once from each table) there are two items generated called P2_LOC_ID, and that's simply not possible (well - how would the application know which one you mean if there could be two with the same name?).
Maybe it's worth trying the following:
select l.loc_id as "L_LOC_ID", l.company, l.postcode, l.street,l.town, e.eval_id, e.loc_id as "E_LOC_ID", e.locum_reg, e.date_booked, e.items, e.addicts, e.number_staff, e.attitude_staff, e.organisation, e.stock_filing, e.agency
from location l, evaluation e
where l.loc_id = e.loc_id
Another option is creating a view on the two tables (of course you must use 2 different column aliases for the two loc_id columns in the view too, otherwise you will receive an ORA-00957: duplicate column name) and use the view for creating reports and forms - however, automatic row processing works just on one table, so you would have to create your own processes to perform the DML...
Edit: I just saw you already got this answered in the APEX forum.
Holger
Edited by: schweich on Nov 18, 2009 7:58 AM

Hyperlinks to locations on same page

Similar Messages

Maybe you are looking for