I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

 Hello jive
     I am playing it back in the slideshow editor/setting up part of
programme where you determine photos/video to be included gaps between
slides, music to play etc This goes through each phot and when comes
to a video the background sound doesnt play, I am using windows 7 and
elements 10.
     regards gins51

Similar Messages

  • I-movie. I made a movie for a party of my daughters using photos and music. The video looks great on my Mac but when I burned a dvd and watched it on several t.v.s it looked like crap. The pictures looked blurry because of the movement of transitions?

    Does anyone have ideas to sharpen the video i made. Looks good on computer but not on tv. the transition between pictures blurs the images. Is it my tv that causes this?

    Does anyone have ideas to sharpen the video i made. Looks good on computer but not on tv. the transition between pictures blurs the images. Is it my tv that causes this?

  • I was working on my 96page catalog with over 2000 photos and out of the blue my frame edges vanished even on the paste board and they are not hidden and are on

    I was working on my 96page catalog with over 2000 photos and out of the blue my frame edges vanished even on the paste board and they are not hidden and are on

    You won't see the frame edges if you are in Preview mode, so you should use Normal mode if you want to see them. You can turn off the Document Grid in the View menu (View>Guides & Grids>Hide Document Grid).

  • I SET UP THE HOME SHARING ON MY COMPUTER, AND i CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HELP

    I just bought my apple tv yesterday and SET UP THE HOME SHARING ON MY COMPUTER, I CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HAPPEN. WHAT'S WRONG? WHAT SHALL I DO NOW?

    I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem.  The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6.  (So maybe double check you have IPV6 turned off)
    So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
    You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
    Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

  • Photos are there but the videos are appearing as blank icons with an error message after the upgrade to Yosemite

    I bought myself a new MacBook Pro and migrated everything from a Time Capsule/Time Machine migration.  My previous computer was slowly dying so I had backed it up although it was running Mavericks.  I migrated everything to the new computer from a Time Machine backup - all my photos and files are there - but in iPhoto, the videos (taken with a camera as .MOV files which usually appear in iPhoto) are appearing as blank icons.  When I click on them, I get the error message, "The operation couldn’t be completed. (OSStatus error -54.)" and the video doesn't play or appear.  The video does, however, appear when I click on "Reveal in Finder - Original File" - so the files are there - they just aren't being compatible with my iPhoto in Yosemite.
    Any idea why?

    Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • 5th generation iPod Touch speaker is not working with music and apps, but the alarm sound goes off fine. Why?

    I have a 5th generation iPod Touch and it got a small amount of water in it around the speaker. When I tried to see if my music would play through it, it couldn't. But, when I tried my alarm to make sure I could still hear it, you could. The sound was fine from the alarm, not as loud as it used to be but I could still hear it. Why doesn't the sound work with my music and apps? Also, would I be able to exchange it if I have a warranty?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • HT4623 MY replacement iPhone 5 will not play my music stored on the phone on the music app that comes with the phone.  It shows the albums and artist but the music will not play.  How do I get the app to work correctly.  It works on my iPad and my wifes p

    help me to play my music on the music app that comes with the iphone 5 .  My replacement phone will not play my music stored on it.

    Anybody have anything for me?

  • Creating a slideshow with Keynote

    Is there a simple tutorial somewhere showing how to create a slideshow with music in Keynote?
    I tried the Help menu and the PDF instructions that come with Keynote, but could find no simple instructions for a newbie to follow.

    If you have individual music tracks you want associated with specific photographs, you can Build each track into a slide and then Build the photographs into the same slide. Then, you can set the photo Builds to be "automatic" so that they will be loosely synchronized with the music. (I emphasize "loosely" because the speed of Builds is not absolute, and varies with the processor speed from computer to computer, so it is not possible to have absolute synchronization with this procedure.)
    If you simply want to have a slideshow, with music running in the background, you can do as Tulse has described: create the music playlist in iTunes and Record it as a Soundtrack in the Inspector/Documents/Audio menu. This also will allow you to "Record" the Builds and Transitions in sync with the music. CAVEAT: this will playback properly ONLY as a stand-alone Keynote presentation. This does not seem to retain sync when exported to another format, or even when played as a Keynote presentation via a Hyperlink.
    Another possibility is to create the slideshow and establish a timeline for the Builds and Transitions. Then in Garage Band (or any other music editing software) you can create a music track timed to the slideshow and then import it (via iTunes) into Keynote as a Soundtrack.
    It all depends on what you are trying to accomplish as to which is the most appropriate method (or series of procedures) that will work best for you. However, as Tulse has said, there is no tutorial on this subject. Trial-and-error and a little hands-on experience will be your tutors.
    Message was edited by: Ron Streicher

  • I bought Elements for a specific purpose...to create a slideshow with music.

    DOES the new REVEL include CREATING A SLIDESHOW WITH MUSIC?  This is the reason I bought ELEMENTS to begin with.
    I am not interested in I PADS, CELL PHONES or any other internet media.  I need the SLIDESHOW/MUSIC feature of my original ELEMENTS.      CAN YOU HELP?     Thank you, Kathy

    kitt6549 wrote:
    DOES the new REVEL include CREATING A SLIDESHOW WITH MUSIC?  This is the reason I bought ELEMENTS to begin with.
    Hi,
    I'm not sure about how you came to the idea that PSE would help you create slideshows with music. To do that seriously, you need a more specialized software like PicturesToExe for example : http://www.wnsoft.com/picturestoexe/ (I have no relationship with this company but I have seen what my fellow photographers are doing with this software).

  • What Apple software do I use to create a slideshow with voiceover?

    What Apple Software do I use to create a slideshow with voice over?

    There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
    If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
    Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
    http://www.lqgraphics.com/software/phototomovie.php
    (Other users here use the alternative FotoMagico:  http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
    Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
    Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie  as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast,  for burning.
    You will be pleasantly surprised at how professional the results can be!
    To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
    http://support.apple.com/kb/HT1089

  • I created a slideshow in Elements 12 and burned a DVD in Premiere 12. Why was the orientation of some of some of my slides rotated 90 degrees

    I created a slideshow in Elements 12 and burned a DVD in Premiere 12. Why was the orientation of some of some of my slides rotated 90 degrees?

    Rick
    Have you looked at Delete and Close Gap as well as Delete for what you describe?
    Nonetheless, adding or moving clips to an existing Timeline content without disturbing the existing Timeline content can be challenging and complex under certain scenarios.
    Typical solutions include making these moves with a keyboard modified held down (Windows Alt or Ctr). I am strictly an Elements Windows user, so we will need to find the Mac counterparts for the Windows keyboard modifier techniques.
    Also, if one move triggers a multi-chain disaster, then you should consider grouping block of clips so that they do not move while you are busy with your Timeline maneuvers. Check out the Clip Menu options for Group and Ungroup.
    Some times in the "Mac condition", you need to use fn in addition to the command to achieve some of these Windows counterparts.
    The following video tutorial on arranging clips and keyboard modifiers is being posted for informational non promotional reasons.
    Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
    It is demo'd with Premiere Elements 8, but the principles are the same for later versions of the program.
    Here is one variation of the issue on Windows.
    ATR Premiere Elements Troubleshooting: PE: Delete and Close Gap Failures
    You should not have to delete audio to prevent it from being split by an addition to an existing Timeline. The keyboard modifiers should help you resolve this type of issue.
    Please review and consider.
    Thanks.
    ATR

  • How to create a report with data using the Crystal Reports for Java SDK

    Hi,
    How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
    I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats.  I can create my own report through the following code snippet:
    ReportClientDocument boReportClientDocument = new ReportClientDocument();
    boReportClientDocument.newDocument();
    However, I cannot find a way to add data elements to the report without specifying an RPT file.  Is this possible?  I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
    is there a way to do this through these packages?
    com.crystaldecisions.sdk.occa.report.data
    com.crystaldecisions.sdk.occa.report.definition
    Am I forced to create a RPT file for the different table and column structures I have? 
    Thank you in advance for any insights.
    Ted Jenney

    Hi Rameez,
    After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser.  I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
    Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
    <%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
    <%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
    <%
    try { 
                ReportClientDocument rcd = new ReportClientDocument();
                rcd.newDocument();
    // Setup the DB connection
                String database_dll = "Sqlsrv32.dll";
                String db = "qa_start_2012";
                String dsn = "SQL Server";
                String userName = "sa";
                String pwd = "sa";
                // Create the DB connection
                ConnectionInfo oConnectionInfo = new ConnectionInfo();
                PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
                // Set new table logon properties
                PropertyBag oPropertyBag2 = new PropertyBag();
                oPropertyBag2.put("DSN", dsn);
                oPropertyBag2.put("Data Source", db);
                // Set the connection info objects members
                // 1. Pass the Logon Properties to the main PropertyBag
                // 2. Set the Server Description to the new **System DSN**
                oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
                oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
                oPropertyBag1.put("Database DLL", database_dll);
                oConnectionInfo.setAttributes(oPropertyBag1);
                oConnectionInfo.setUserName(userName);
                oConnectionInfo.setPassword(pwd);
                // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
                oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
    // Add a Database table
              String tableName = "Building";
                Table oTable = new Table();
                oTable.setName(tableName);
                oTable.setConnectionInfo(oConnectionInfo);
                rcd.getDatabaseController().addTable(oTable, null);
        catch(ReportSDKException RsdkEx) {
                out.println(RsdkEx);  
        catch (Exception ex) {
              out.println(ex);  
    %>
    Throws the exception
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
    There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
              String tableName = "Building";
                String fieldname = "Building_Name";
                Table oTable = new Table();
                oTable.setName(tableName);
                oTable.setAlias(tableName);
                oTable.setQualifiedName(tableName);
                oTable.setDescription(tableName) ;
                Fields fields = new Fields();
                DBField field = new DBField();
                field.setDescription(fieldname);
                field.setHeadingText(fieldname);
                field.setName(fieldname);
                field.setType(FieldValueType.stringField);
                field.setLength(40);
                fields.add(field);
                oTable.setDataFields(fields);
                oTable.setConnectionInfo(oConnectionInfo);
                rcd.getDatabaseController().addTable(oTable, null);
    This code succeeds, but it is not clear how to add that database field to a section.  If I attempt to call the following:
    FieldObject oFieldObject = new FieldObject();
                oFieldObject.setDataSourceName(field.getFormulaForm());
                oFieldObject.setFieldValueType(field.getType());
                // Now add it to the section
                oFieldObject.setLeft(3120);
                oFieldObject.setTop(120);
                oFieldObject.setWidth(1911);
                oFieldObject.setHeight(226);
                rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
    Then I get an error (which is not unexpected)
    com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
    How do I add one of the table.SetDataFields()  to my report to be displayed?
    Are there any other pointers or suggestions you may have?
    Thank you

  • How do I create a slideshow with music and voiceover?

    I am trying to create a slideshow with photos, music (iTunes playlist), and voiceover created in Garageband. I cannot figure out how to have both the voiceover and the music play during the slideshow. I also tried iDVD but ran into the same problem.
    I also wanted certain songs to play during certain sets of pictures and I can't figure out how, other than to create separate slideshows for each song, how to set it up to show the photos for the duration of certain songs... if that is possible. However, my main issue is the first one - how or which program to use to combine photos (iPhoto), music (iTunes), and voiceover (GarageBand).

    However, my main issue is the first one - how or which program to use to combine photos (iPhoto), music (iTunes), and voiceover (GarageBand).
    Use whichever you want.
    I am trying to create a slideshow with photos, music (iTunes playlist), and voiceover created in Garageband. I cannot figure out how to have both the voiceover and the music play during the slideshow. I also tried iDVD but ran into the same problem.
    Use separate tracks for music and voiceover/narration so you can adjust volumes independently.
    I also wanted certain songs to play during certain sets of pictures and I can't figure out how, other than to create separate slideshows for each song,
    Use separate tracks for each song or use two tracks and alternate songs on these tracks so as to allow maximum alignment/overlap possibilities.
    how to set it up to show the photos for the duration of certain songs... if that is possible.
    Slide photo and/or song to align beginnings and then drag the end photo "handle" left or right to change its duration to match the duration of your song.

  • Creating a slideshow with 500+ photos

    I am trying to create a slideshow that will run continuously with over 500 photos and burn it to a DVD. Is there any way to do this in iDVD? I want to be able to use the titles of the photos also. I tried doing it in iMovie, but when I added a title to the photo, it did not keep the title on the photo for the entire time. It split the photo into 2 parts, with the title and without.

    I put all of the photos into iMovie, added a title to each photo using the "Music Video" title and it split the photo. I tried to edit it and make it last the lenght of the clip and everything got completely messed up. Only parts of the title would show up on some, a photo would just flash in-between regular photos, and many other errors.
    Is there any way for me to do the same in iDVD? I know it limits the number of photos to 99 per slideshow, but can I make them run continuously?
    Thank you,
    Julie

  • I am trying to create a slideshow in Elements 10

    I am tring to create a slideshow in Elements 10 Organiser, however the is no "slideshow" tab to select in the create options list, can anybody help please?

    Hi Domnic and Barbara, thank you so much for your help and replies. Yes, I'm using a Mac which is obviously my problem.
    Thank you both so much for your assistance, have a great day, Cheers, Ray

Maybe you are looking for

  • ALV report for 5 Grids using Objects and Method

    I have few questions in ALV 5Grids ,could you please correct me in the following program logic... Using this program logic i am able to generate the five Grids and able to populate Header details from VBAK into Grid1,If you click in the Grid 1 and it

  • HELP PLZ!! i tune wont open at all!

    this is getting so frustrating!! now i have another problem, itune wont even run! it keeps giving a message that quicktime is required to run itunes. i alrready have quick time installed and it still wouldnt run can someone help me please

  • How to connect one edge to multiple origin in Flash Media Server

    Is there a way to do this? One edge to connect to  two or more origin.

  • Excel for Mac

    Hello! I have the Mac Excel version. Suddenly the Excel icon in the dock will not respond to my double click. I went directly to the hard drive and all my files are visible and even show in the tiny preview. But I cannot open any of them. Please help

  • Cl_gui_alv_tree node layout not working!

    Hi guys! I have the following situation. I use a Tree, and an Item layout. All setting in the node_layout don't work, With the item layout i set a specific item. When I set this icon, i still have the "folder" icon of the node layout in my tree, so i