I am extracting the data from ECC To bw .but Data Loading taking long tim

Hi All,
i am extracting the data from ECC To BI Syatem..but Data Loading Taking Long time. from last 6 hoursinfopackage is running.still it is showing yellow.Manually i made the red.and delete again i applied repeat of the last delta.but same proble is coming .in the status job is showing bckground job is not finished at source system.we requested to basis.basis people killed that job.again we schedule the chain also again same problem is coming.how can i solve this issue.
Thanks ,
chandu

Hi,
There are different places to track your job. Once your job is triggered in BW, you can track your load job where exactly it is taking more time and why. Follow below steps:
1) After InfoPackage is triggered, then take the request number and go to source system to check your extraction job status.
You can get the job status by taking the request number from BW and go to transaction SM37 in ECC. Then give the request number with begining '' and ending ''. Also give '*' to user name.
Job name: REQ_XXXXXX
User Name: *
Check the job status whether job is completed or cancelled or short dump. If the job is still running check in SM66 whether you can see any process. If not accordingly you got to check in ST22 or SM21 in ECC. If the job is complete, then the same in BW side now.
2) Check the data arrived in PSA, if not check whether Transfer routines or start routines are having bad SQL or code. Similarly in update rules.
3) Once it is through in Source system (ECC), Transfer rules , Update Rules, then the next task is updating the data might some time take more time which might be based on some parameters ( Number of parallel process to update database ). Check whether updating the database is taking more time and may be you got to check with the DBA guy also.
At all the times you should see minimum of atleast once process running all the time in SM66 till the time your job gets complete. If not you will see a log in ST22.
Let me know if you still have questions.
Assigning points is the only way of saying thanks in SDN.
Thanks,
Kumar.

Similar Messages

Extract data from ECC to Oracle using Data Services 4.0

How to extract data from ecc6.0 Business content extractors to oracle using sap bo data services 4.0

Are you trying to use the SAP BW Business Content to extract data out of ECC and load into Oracle tables with Data Services? If that's the case, then you cannot do that. The SAP BW Business Content was developed to only be used in conjunction with SAP BW. When using Data Services to access the extractors in ECC, it has to have an SAP BW InfoPackage associated with it to execute. In this architecture, Data Services is only a pass through from ECC to BW and allows the ability to do some transformations of data prior to loading into the EDW layer (staging tables basically) on SAP BW.
To connect ECC to Oracle, you're going to have to have all of the SAP BusinessObjects supplied Function Modules loaded onto ECC, along with a non-dialog logon account that has the ability to pass dynamic ABAP programs, generate the programs and schedule them. Depending on how you want to process the output, you may also have to have the ability to write to files on the ECC application servers and have an FTP account created on the application servers that can GET flat files and potentially DELETE them (you're going to need to delete periodically, otherwise your jobs will crash when the file space allocation has been consumed).

Migrated data from RBS to datafiles but data still remains in FileStream

have a content database with RBS enabled on SQL Server 2012 Filestream. Migrated the data from Filestream to SQL with the script
$cdb = Get-SPContentDatabase <database_name>
$rbs = $cdb.RemoteBlobStorageSettings
$rbs.SetActiveProviderName("")
$rbs.Migrate()
$rbs.Disable()
seen the data being uploaded into the SQL (datafiles increased after migration)
checked all OK
$rbs.Installed() #shows true
$rbs.Enabled #shows false
run in SQL backend database
exec mssqlrbs.rbs_sp_set_config_value 'garbage_collection_time_window','time 00:00:00'
exec mssqlrbs.rbs_sp_set_config_value 'delete_scan_period','time 00:00:00'
However the data is still in the filestream store.
How do I get rid of the Filestream Store data (since it was migrated to SQL datafiles) ?

check this link and make sure you followed the steps.
http://alipka.wordpress.com/2010/06/19/how-to-disable-rbs-in-sharepoint-2010/
or Step K on this blog:
http://blogs.technet.com/b/pramodbalusu/archive/2011/07/09/rbs-and-sharepoint-2010.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Some Master and transaction loads taking long time in R/3 extraction andBW

Hi Experts,
We have some Master and transaction loads which takes long time in source system(R/3) in BW as well in daily process chains.These loads are happening in daily basis.
In Extraction ,they takes long duration to finish.
And then BW also takes much time.....
So pls give some suggestions ,by which we can reduce this duration....
And what can we do improve these loads perfomances......
your small suggestion can improve loads performance......
thanx in advance.....

hi naveen,
go back and have a look at ur infopackage .. for the no of data packets it is picking up for each time ....
this can be done by going to scheduler in the menu and u can find the no of data packets and the size as well....
hope this works ...
snigdha >>>

How to transfer data from ECC to CRM via IDocs (Clfmas01),

Hi all,
how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.
Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
Edited by: khaja fareed on Jan 11, 2010 12:44 PM

First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
2-Go to document tab there enter Sales order no/PO number then execute it.
Then go to GTS server in compliance management module you can get all the information.
Regards
Sitanshu Panigrahi

Unable to extract the data from ECC 6.0 to PSA

Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanks

ECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks

Extraction of data from ECC to 3rd Party systems

Hi All,
I want to know all the options available for extracting data from ECC to a 3rd party system (custom datawarehouse like Teradata, hyperion etc). Also, I want know if there is a best practice documentation available for extraction of data from ECC to any 3rd party system?
Thanks,
SB.

Hi SB,
Check the following link
http://expertisesapbi.blogspot.com/2010/06/how-to-transfer-data-from-sap-system-to.html
Ranganath.

Extracting data from ECC tables in BODS

Hello all,
I'm trying to extract data from ECC tables. I have created a data store and imported the necessary tables(FAGLFLEXT) that i will be using. I have used the table in a job as a source and tried to execute the job but i was only able to extract 28 records from the extractor when there are many more records present in the table and also when i view the data in BODS i can only see 28 records.
Plz help me in resolving this. How to extract the whole data?
Thanks in advance.

The table layouts can be found in the [documentation for EPMA|http://www.oracle.com/technetwork/middleware/bi-foundation/epm-data-models-11121-354684.zip] . If this doesn't work, there are other options to export hierarchies to text files. You can use life cycle management or the [EPMA File Generator|http://docs.oracle.com/cd/E17236_01/epm.1112/epma_file_gen_user/launch.html].
Kyle Goodfriend
http://www.in2hyperion.com
Please make sure you assign your post as answered when an appropriate answer is provided (or helpful when applicable) so others benefit.

How to fetch the data from Ecc to BI ?

Hi everybody.
Can anyone briefly explain with the screen shots > How to fetch the datasource from RSA5 tcode in ECC to BI? How you replicate there? how the INFO PACKAGE , TRANSFORMATIONS, DTP , DSO, INFO CUBE was created? where we see the catalogs for this data.......THANKS IN ADVANCE

Hi.
You can follow the below steps to fetch the data from ECC to BI System.
1>Connection should be there between ECC and BW System.
2>Go to Tcode-RSA5 in ECC system and find your data source and then activate it.
3> Go to Tcode-RSA6 in ECC system to check whether your DS is available..if it is there then its been activated.
4>Go to Extract Checker tcode RSA3 and test the data and make sure data is correct.
5>login to BW Side..go to tcode RSA1-->Choose your source system. ECC -> double click on it and you will move to Data source>Select your Application component ex, SD,FI ...>Right click and replicate the Datasouce> Now on refresh you can see the datasource in BI System.
6>Install the related the Infoprovider .. cube or dso ..Connect the datasouurce and create Transformation.
7> Now create infopackage and run it in ful & init mode then do the delta for the new records.
Please refer the below link for more details on extraction.
http://www.trinay.com/SAP%20BW%20Extraction.pdf
Hope this helps.
Br.
Alok

Query on loaded the data from ECC to BI

Hello Bw guys,
I kept one responsibility in my resume as Loaded the data from ECC to BI and used intialization with delta update and full update methods.What does it means? Can u please help me out?
Thanks
Amarnath K

Very simple.
This is somewhat like how you updated your resume by transfering from another and did a fake update to your resume.
The difference is ECC does that using a authorized route to update it in BI.
PS:If you have provided the client name you are going to join it will be easy for us to explain to them directly.
~Andrew
Edited by: Andrew J on Dec 18, 2009 3:44 PM

Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal repor

HI Expert
Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal report
Need Step by Step Procedure whatl all we come across while Generating report from SAPBI (ECC(Functionmodule/view/BAPI)
to Crystal report what all integration and setting we need to do
Thanks and Regards
AhmedPasha

Hello,
Ingo Hilgefort has documented this step by step in this SCN article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe?QuickLink=index&overridelayout=true
Starting on page 13, you can use the same steps - he selects data from a table join, you select FN instead for function module.
You can also get to it via this link:
http://www.sdn.sap.com/irj/sdn/business-objects-bi-for-sap?rid=/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe
Regards,
Tammy

Pulling of Exchange Rate data from ECC to BI

Hi All,
we are having an requirement to pull TCURR Table Exchange Rate data from ECC to BI.
If anybody worked on this scenario could you please share valuable inputs regarding this.
I gone through this SDN forum link: Re: Automated Exchange Rate Loading in BPC NW ( please share some more details regarding this )
Regards
Amit

Hi All,
I hope this will help you to pull Exchange rate data from ECC Table : TCURR to SAP BI System.
ECC Steps : Creation of generic datasource
1) Create generic Transaction Data source Using TCode : RSO2 with name ZTCURR and then press create Button.
2) Input Applic. Component: FI-GL and give description.
3) Input View/Table: TCURR and Press save Button.
4) This will take you to extract structure of data source ZTCURR. In this structure select respective field from the selection field option (In future we will use it in BI info package) and then press save button.
5) Use Tcode: RSA3 to check the data by giving custom data source ZTCURR name.
Note:In this case we are extracting full data from TCURR table. If your project demands you can use delta specific field.
SAP BI 7 Steps
1) Go to BI system, TCode: RSA1--> Source System-> Replicate metadata, then you can see generic data source "ZTCURR" in your BI data source tree.
2) Maintain Info cube Structure same like table : TCURR,
ECC Field      ECC DATA TYPE                               BI Field     BI Data Type
KURST     CHAR                          -
>                 ZKURST     CHAR (Length 4)
FCURR     CUKY                          -
>          ZFCURR     CHAR (Length 5)
TCURR     CUKY                          -
>          ZTCURR     CHAR (Length 5)
GDATU     CHAR                          -
>          ZGDAT      CHAR (Length 8)
UKURS     DEC                             -
>          ZUKURS     NUMBER ( Key Figure )
FFACT     DEC                             -
>          ZFFACT     NUMBER ( Key Figure )
TFACT     DEC                             -
>          ZTFACT     NUMBER ( Key Figure )
=========================================================================================
3) Conversion of default format "YYYY/MM/DD" to "YYYYMMDD".
In Transformation: "GDATU" is number format, not date format, so we need to write start routine in transformation.
With the Help of below code you can convert default format
"YYYY/MM/DD" to "YYYYMMDD".
DATA: DATE      TYPE CHAR10,
          L_INDEX   TYPE SY-INDEX.
LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
    L_INDEX = SY-TABIX.
    CALL FUNCTION 'CONVERSION_EXIT_INVDT_OUTPUT'
      EXPORTING
        INPUT = <SOURCE_FIELDS>-GDATU
      IMPORTING
        OUTPUT = DATE.
    CONCATENATE DATE+6(4)
                DATE+3(2)
                DATE+0(2)
    INTO <SOURCE_FIELDS>-GDATU.
    MODIFY SOURCE_PACKAGE FROM <SOURCE_FIELDS> INDEX L_INDEX TRANSPORTING GDATU.
ENDLOOP.
Note : Customize above ABAP code according to your client requirement.
==============================================================================================
4) Calculation of Month End Rate----> Means last working day of month
Please refer below solution ( sent on 3rd June 2011 ) to calculate Month Rate
Go to BI transformation and write formula in ZGDAT field. In this case add GDATU as source field of rule and write below formula.
*Last working day of month Formula *    :             LAST_WORKINGDAY_MONTH( GDATU, '' )
Last working day is calculated based on the data maintained in the ECC TCODE : SCAL ( SAP Calendar )
==============================================================================================
5) CALMONTH calculation: conversion of YYYYDDMM format   to YYYYMM format.
This below given ABAP code helps you to convert GADTU: YYYYDDMM format   to CALMONTH : YYYYMM format.
In BI transformation write field routine in CALMONTH field to display date in this YYYYMM format.
DATA : L_GDATU TYPE tys_SC_1-GDATU.
CLEAR L_GDATU.
CONCATENATE SOURCE_FIELDS-GDATU0(4) SOURCE_FIELDS-GDATU4(2)
            INTO L_GDATU.
RESULT = L_GDATU.
Regards
Amit
Edited by: amit_sap_n on Jul 20, 2011 1:54 PM

Issue in transfer of data from ECC to APO

Hi All,
I have a requirement of transferring data from ECC to APO. I am using EXIT_SAPLCMAT_001 fro this purpose. The problem is, I need to transfer the data of a field that is not present in cif_matloc but present in /sapapo/matloc.
How should I proceed...Please help....this is an urgent requirement
Thanks & Regards,
SriLalitha

Hi,
you may want to go to the transaction /SAPAPO/SNP_SFT_PROF
Determine Forecast of Replenishment Lead Time
Use
In this field, you specify how the extended safety stock planning determines
the forecast of the replenishment
lead time (RLT). The following values are available:
Supply Chain
The system determines the RLT forecast using the supply chain structure by
adding the corresponding production, transportation, goods receipt, and goods
issue times. If there are alternative procurement options, the system always
takes the
longest
option into account.
Master Data
The system determines the RLT forecast from the location product master
data.
Master Data/ Supply Chain
First, the system determines the RLT forecast from the location product
master data. If no RLT forecast can be determined, the system determines the
forecast using the supply chain structure (as described under
Supply
Chain
Dependencies
You can retrieve the replenishment lead time forecast yourself by using the
GET_LEADTIME
method of the Business Add-In (BAdI) /SAPAPO/SNP_ADV_SFT.
Replenishment Lead Time in Calendar Days
Number of calendar days needed to obtain the product, including its
components, through in-house
production or external
procurement.
Use
The replenishment lead time (RLT) is used in the enhanced methods of safety
stock planning in Supply Network Planning (SNP). The goal of safety
stock planning is to comply with the specified service level, in order
to be prepared for unforeseen demand that may arise during the replenishment
lead time. The longer the RLT, the higher the planned safety stock level.
Dependencies
The field is taken into account by the system only if you have specified
master data or master data/supply chain in the RLT: Determine
Forecast field of the safety stock planning profile used.
Hope this helps.
The RLT from ECC is in MARC-WZEIT which is transferred to APO in structure /SAPAPO/MATIO field CHKHOR.
May be if you maintain the setting in the profile, you may get the value in RELDT.
Thanks.

Error while loading data from ECC to BI

Hi BW Experts,
while loading data from ECC 6.0 to BI i got error in details tab of the infopackage as datapackage 1 arrived in bw processing not yet finished.
Could any one help me out?
Thanks

Amar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M

Transfer Data from ECC to SRM

Hi ,
I'm trying to transfer data from ECC to SRM for creating bid document ( Function : BBP_PD_BID_CREATE ). After transferring the data I want to get the data back to ECC ( I need bid document number to write on delivery document's field ). What's the best way to do this ?
Regards.

Hi vinit ,
I've written code to call 'BBP_PD_BID_CREATE' in ECC. But ECC and SRM have different structures. So i am not sure how i can define data to send SRM.
Here is my code in ECC program
CALL FUNCTION 'BBP_PD_BID_CREATE' IN BACKGROUND TASK
   DESTINATION 'XXX'
   IMPORTING
     I_REF_GUID    =
     I_BAPIMODE    =
     I_PARK        =
     I_SAVE        =
     I_TESTRUN     =
     I_HEADER      = I_HEADER ?
     IT_ATTACH     =
     IT_DYN_ATTR   =
     IT_CONDITIONS =
    EXPORTING
      E_HEADER      = E_HEADER ?
      ET_ATTACH     =
      ET_DYN_ATTR   =
      ET_CONDITIONS =
    TABLES
       I_ITEM        =
       I_PARTNER     =
       I_LONGTEXT    =
       I_SDLN        =
       I_ORGDATA     =
       I_HCF         =
       I_ICF         =
       I_TOL         =
       I_WEIGHT      =
       IT_EXCHRATE   =
       E_ITEM        =
       E_PARTNER     =
       E_LONGTEXT    =
       E_SDLN        =
       E_ORGDATA     =
       E_HCF         =
       E_ICF         =

I am extracting the data from ECC To bw .but Data Loading taking long tim

Similar Messages

Maybe you are looking for