I am getting error while saving new WORKFLOW

Dear All,
Please help me for the following issue.
I am trying to make new WORKFLOW but system gives a ERROR while saving from SWDD tcode.
error is:
System error: Function cancelled
Message no. WD255
Regards,
Mukesh

Hi Mukesh,
You have to maintain the Prefix numbers in the system, in tcode SWU3 --> maintain definition environment --> Maintain prefix number --- > click on execute button.
There, create a new value for your client(XXX) system to generate the workflow definition / task definition.
Regards,
Murali Krishna.

Similar Messages

  • Error while saving list workflow in sharepoint designer 2013

    Hi,
       I am trying to create custom workflow using sharepoint workflow 2013 at client side.While i am saving this,it thowas error-"Server side activities have been updated.you need to restart  sharepoint designer to use the updated version
    of activites"
    I have installed 32-bit sharepoint designer 2013 in my system and i have no access to server.
    I have also followed the solution  and deleted the contents in the below location.
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>
    Please help to solve the error.
    Thank you

    You need to install updated version of SharePoint designer.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
    Try below:
    http://stackoverflow.com/questions/19652391/error-while-saving-a-workflow-via-sharepoint-designer-server-side-activities-ha

  • Error while saving any workflow in database

    hi
    i had created a simple workflow and i was trying to save in database, but i faced following problem while saving...
    plz help for this
    1700: Could not connect with username/password 'system/myadmin@orcl' ('ORA-12154: TNS:could not resolve the connect identifier specified
    -----------------------------------------------------------------------------------------------------------------------

    You need to install updated version of SharePoint designer.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
    Try below:
    http://stackoverflow.com/questions/19652391/error-while-saving-a-workflow-via-sharepoint-designer-server-side-activities-ha

  • Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    While saving a workflow using SharePoint designer on a SharePoint site, I get the following error: 
    Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
    Steps to recreate error:
    Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
    Access the list using SharePoint Designer 2013, in the workflow section, click new workflow. 
    In the new workflow dialog, enter workflow details, click save (see screenshot below).
    Error message is displayed as below:
    After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
    Workaround
    When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
    Notes
    Workflow Manager 1.0 is installed.
    The site has been registered with Workflow manager using Register-SPWorkflowService
    cmdlet.
    Any clue on why is this happening?

    Hi Vivek,
    Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>
    http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error while saving new Version

    Hi,
    I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
    The version gets created successfully but it does not allow me to save the same and gives the following error.
    Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
    Please help.

    Hi,
    I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
    The version gets created successfully but it does not allow me to save the same and gives the following error.
    Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
    Please help.

  • Error while saving a workflow via sharepoint designer Office 365: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities

    Hi,
    I get the above error whenever I try to save a new WorkFlow. I have cleared the caches
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>, and
    I still get the same issue.
    We are using SharePoint Designer 2013 (15.0.4569.1503) and connecting to SharePoint 2013 on Office 365.
    Can you please provide more insight?
    Thanks.

    Hi Rake,
    You can compare your PC and another machine which is working, see if it is related to IE settings(e.g. SharePoint urls in trusted sites zone).
    And you can try re-install the SharePoint Designer 2013 with same version and bit-version(32/64) on your PC like another machine, then check again.
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • Getting error while deploying New WebService project on standalone server

    Hi,
    I have created a new Model project for WebService and I am able to test this new webservice project by launching "TalentTasksServiceImpl.java" file locally but getting some error while deploying it on standalone server. See below log for more details,
    08:03:16 PM INFO: Unable to load annotation javax.interceptor.Interceptors for parsing. The annotation is ignored.
    08:03:16 PM INFO: Unable to load annotation javax.interceptor.Interceptors for parsing. The annotation is ignored.
    08:03:16 PM INFO: GenericWSWarAnnotationListener.parseAnnotatedClass Adding Servlet Mapping with URL pattern /TalentTasksService for annotated WebService class oracle.apps.hcm.talent.common.tasksService.applicationModule.server.TalentTasksServiceImpl
    *08:03:16 PM Error: Could not load endpointInterface oracle.apps.hcm.talent.common.tasksService.TalentTasksService*
    08:03:17 PM #### Deployment incomplete. ####
    08:03:17 PM WSA process exited with code 1.
    I have verified the jar selection mention on this forum link: help..
    Any help on this will be greatly appreciate.

    Yes Frank. Ours is an SDO service created as per [Service enabled Application Modules|http://docs.oracle.com/cd/E23943_01/web.1111/b31974/bcextservices.htm#CJAJGIEB] . We have created the deployment profile as a 'Business Component Service Interface' profile.
    Our attempt to deploy onto standalone from Jdev also fails with the same error. Unsure why the interface is unable to load - Error: Could not load endpointInterface oracle.apps.xyz.common.tasksService.TasksService.
    Does this mean, the deployment process is unable to locate this interface? We have cross checked our deployment profiles quite a few times and could not find anything amiss.

  • Getting Error while saving Slot in ACC..?

    Hi All,
    I'm getting Error "Error saving component state /atg/registry/Slots/TestSlotOne" while saving a Slot created in ACC.. What could be the reason..?
    Thanks in Advance,
    VishnuVardhan Bovilla & Nithin Kayithi

    There could be many reasons and only the server logs can explain that.
    In the ACC console you should be able to see the error message or in the ACC error dialog, click on "Details" instead of Dismiss which will give you the stack trace.
    Peace
    Shaik

  • Getting error while saving image to database

    hi, i am getting error when i click commit button when i try to save image the message is as
    Cannot create an object of type:java.sql.Blob from type:oracle.jbo.domain.BlobDomain with value:ÿØÿàJFIF``ÿáExifMM*2VGFGI2œ�êô‡ijÔ2009:03
    please help me soon

    hey thanks , but my jdbc pool and driver is fine. what may be the problem and I am not able to change the type to BlobDomain in eo. The type i Blob only may be this is the problem how can I change it to Blob Domain

  • Error while creating new workflow

    Hello,
    I am learning Approval Workflow in OIM10g , so i created
    resource object as Mobile Phone with type as generic.
    created process adapter,
    While creating work flow for my above resource from OIM AdminConsole->ResourceManagement i get
    following error
    java.lang.NullPointerException
         at com.thortech.xl.webclient.actions.tcActionBase.getWorkflowDefinitionOperationsIntf(Unknown Source)
         at com.thortech.xl.webclient.actions.ResourceWorkflowsAction.createWorkFlow(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
         at com.nexaweb.server.servlet.NexawebRequestDispatcher.doClientRequest(NexawebRequestDispatcher.java:346)
         at com.nexaweb.server.servlet.NexawebRequestDispatcher.forwardClientRequest(NexawebRequestDispatcher.java:114)
         at com.nexaweb.server.servlet.JspProcessor.processRequest(JspProcessor.java:137)
         at com.nexaweb.server.servlet.RequestProcessor.dispatchRequest(RequestProcessor.java:463)
         at com.nexaweb.server.servlet.RequestProcessor.processClientEvent(RequestProcessor.java:710)
         at com.nexaweb.server.services.protocol.NexawebProtocolHandler.handleProcessEventCommand(NexawebProtocolHandler.java:1026)
         at com.nexaweb.server.services.protocol.NexawebProtocolHandler.dispatchCommand(NexawebProtocolHandler.java:140)
         at com.nexaweb.server.NexawebServer.doService(NexawebServer.java:420)
         at com.nexaweb.server.NexawebServer.doGet(NexawebServer.java:335)
         at com.nexaweb.server.admin.ServerAdmin.callNexawebServer(ServerAdmin.java:378)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.nexaweb.loader.xMethodInvoker.runInThread(xMethodInvoker.java:69)
         at com.nexaweb.server.api.admin.ServerAdminProxy.callNexawebServer(ServerAdminProxy.java:551)
         at com.nexaweb.redirect.RedirectServlet.doGet(RedirectServlet.java:18)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Can you just try it through Design Console :
    http://rajivdewan.blogspot.com/2010/07/multilevel-approval-workflow-in-oracle.html

  • SAPRouter Certification renew  fail.getting error while generating new Cert

    Hi,
    I m working in SAP BASIS  support project.
    Our SAP router certification expired.
    Now i m trying  to renew the  Router Certificate to  get connection with SAP.
    The fallowing  steps i am doing ...
    Taken backup of SAPROUTER folder ie: c:\SAPROUTER\
    i have deteted the files  local.pse, Cert_V2, srcert.txt  and  certreq  from  c:\SAPROUTER\
    Step 1:
    In the SAP Router PC, given the   sapgenpse command  from SAPROUTER path
    C:\SAPROUTER>sapgenpse get_pse -v -r certreq -p local.pse "CN=SAP1, OU=0000809334, OU=SAProuter, O=SAP, C=DE"
    Got absolute PSE path "C:\SAPROUTER\local.pse".
    Please enter PIN:
    Please reenter PIN:
    Supplied distinguished name: "CN=SAP1, OU=0000809334,
    OU=SAProuter, O=SAP, C=DE
    Generating key (RSA, 1024-bits) ... succeeded.
    certificate creation... ok
    PSE update... ok
    PKRoot... ok
    Generating certificate request... ok.
    STEP 2 :
    opened :   http://www.service.sap.com/saprouter-sncadd
    click->apply
    ->Continue
    -> Pasted the content of   certreq  file frm c:\SAPROUTER\  in the  box and  clicked ->Request Certificate
    Now copied the Generated file  contents in a new txt file   srcert.txt  and  saven  in  C:\SAPROUTER\
    STEP 3 :
    Now in the  SAPROUTER  PC,  when i run   import_own_cert fallowing  error coming.
    C:\SAPROUTER>sapgenpse import_own_cert -c srcert -p local.pse
    Please enter PIN:
    import_own_cert: Installation of certificate failed
    ERROR in ssf_install_CA_response: (1281/0x0501)
    aux_file2OctetString failed : "No such file or directory"
    ERROR in ssf_read_certs_from_file: (1281/0x0501)
    aux_file2OctetString failed : " No such file or directory"
    ERROR in aux_file2OctetString: (1281/0x0501)
    stat("srcert") returned : "No such file or directory"
    Plz clear my doubt,  why this above  error  coming , even  the  file  is  saved  srcert.txt   in  c:\SAPROUTER\   folder  with  the  contents i got from  http://www.service.sap.com/saprouter-sncadd
    I m doing  this 1st  time.
    Please tell me , if i m doing  any wrong steps..
    Thanks in advance,
    -VASU.G

    HI
    Please follow your statements where you have created the certificate file by the name of .txt extention
    "" Now copied the Generated file contents in a new txt file *srcert.txt* and saven in C:\SAPROUTER\ ""
    Please re-create this file without the extention then issue the next command statements
    ""sapgenpse import_own_cert -c srcert -p local.pse""
    REgards
    Anwer Waseem
    SAP BASIS

  • Getting Error while saving a transaction without making any changes to it.

    Hi All,
    I have a page where in the advance table I add few rows and save the transaction. First time when I save it everything works fine, but when I save it again without making any changes to the fields I get following error:
    "Unable to perform transaction on the record. \nCause: The record has been deleted by another user. \nAction: Cancel the transaction and re-query the records to get the new data."
    In the same page if I make any changes again it allows me to save the transaction.
    Please guide how we can avoid it..
    I have already checked many threads related to the issue but nothing has worked. Please help!!
    Any help would be highly appreciated..
    Regards,
    Nisheeth

    Hi All,
    please help!!

  • Getting error while creating new fields

    hi all,
    i am getting an error when i am adding a new field thru eewb to a txn.
    error message "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems."
    plz helep me out
    and i have few doubts
    1 in web ui to display these new fields do we need to write a program
    2. new field values are stored in table do weneed to create any table ?
    3. do we need to write any program so that the values will be stored in tht table?
    thanks
    madhuri
    Edited by: madhuri pasupuleti on Apr 27, 2009 1:33 PM

    Hi Madhuri,
    For error message "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems."
    - Check SAP Market Place for any notes on "CRM_BTX_ADD_NEW_FIELDS"
    1 in web ui to display these new fields do we need to write a program
    - No need to write any program to display new fields in WEB UI. Using the EEWB will automatically create code behind the screens. All new fields created will be available in base table (example: for business partner - BUT000). You can explore the fields available functionality in WEB UI to populate them
    2. new field values are stored in table do we need to create any table ?
    - No, EEWB will automatically creates customized structure in code behind the screens
    3. do we need to write any program so that the values will be stored in tht table?
    - No, I don't know how to add values to the particular field(s) but sure that you don't need to write any program to store the values in customized tables
    Cheers,
    Peter J.

  • Getting Error while creating new agent in ICM 8.5.2

    I am facing a problem when i am trying to create a new agent or skill group, I am getting the error:
    Failed to Update the Database.
    Attempt to insert a new record with a Unique ID that is already in use.
    Data Location: Skill_Target.
    Please help !!!!!!!

    Hi Arpit,
    This error message can appear when an agent with the same name already       exists in the ICM database.
    One solution is that you add the new agent to the ICM with a different       name.
    Alternatively, you can delete the existing agent. When you delete an       agent, it is logically marked for deletion, but continues to exist in the       database with the Deleted flag set to Y (yes). It is no longer available for use in the routing scripts. However, you       will still be unable to create a new agent with the same name as that of the       deleted agent, because it still exists in the database. In order to delete the       agent record permanently, select Configuration Manager >       Administration > Deleted Objects, and       delete it.
    Refer to  Failure to Add a New Agent to Cisco ICM - Violation of UNIQUE KEY Constraint for more information. Also refer  UCCE 7.x: Error Message "Failed to update the database" When Trying to Delete an Agent.
    Regards,
    Greeshma

  • Error While saving new customer record,

    Hi,
    I have changed properties of the field PARTNER1 in the application crmm_account, to search for customer. The requirement is that account ID must have URL to ODC. I just copied same properties under Object link of BP_NAME1.
    But after saving the settings, and running the application, I get the following error on the browser window:
    <b>
    Runtime Errors         SYSTEM_ON_COMMIT_INTERRUPTED
    Date and Time          08.10.2007 11:35:53
    Short text
         The COMMIT WORK processing must not be interrupted.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLBUPA_MDM_PROXY" had to be terminated
          has
         come across a statement that unfortunately cannot be executed.</b>
    Is it like what I am doing is wrong, or should I do it in some other way??
    Points will be rewarded without fail
    Regards,
    Chinnu

    Hi Amol,
    One user faced the same issue on IT tool forum, check the link for solution.
    http://sap.ittoolbox.com/groups/technical-functional/sap-crm/communication-error-with-the-external-tax-systemvertex_ms0018-909264
    Hope it helps,
    Regards,
    MT

Maybe you are looking for